net/wireless/mesh.c

   1 #include <linux/ieee80211.h>
   2 #include <linux/export.h>
   3 #include <net/cfg80211.h>
   4 #include "nl80211.h"
   5 #include "core.h"
   6
   7 /* Default values, timeouts in ms */
   8 #define MESH_TTL                31
   9 #define MESH_DEFAULT_ELEMENT_TTL 31
  10 #define MESH_MAX_RETR           3
  11 #define MESH_RET_T              100
  12 #define MESH_CONF_T             100
  13 #define MESH_HOLD_T             100
  14
  15 #define MESH_PATH_TIMEOUT       5000
  16 #define MESH_RANN_INTERVAL      5000
  17
  18 /*
  19  * Minimum interval between two consecutive PREQs originated by the same
  20  * interface
  21  */
  22 #define MESH_PREQ_MIN_INT       10
  23 #define MESH_PERR_MIN_INT       100
  24 #define MESH_DIAM_TRAVERSAL_TIME 50
  25
  26 /*
  27  * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
  28  * before timing out.  This way it will remain ACTIVE and no data frames
  29  * will be unnecessarily held in the pending queue.
  30  */
  31 #define MESH_PATH_REFRESH_TIME                  1000
  32 #define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
  33
  34 /* Default maximum number of established plinks per interface */
  35 #define MESH_MAX_ESTAB_PLINKS   32
  36
  37 #define MESH_MAX_PREQ_RETRIES   4
  38
  39
  40 const struct mesh_config default_mesh_config = {
  41         .dot11MeshRetryTimeout = MESH_RET_T,
  42         .dot11MeshConfirmTimeout = MESH_CONF_T,
  43         .dot11MeshHoldingTimeout = MESH_HOLD_T,
  44         .dot11MeshMaxRetries = MESH_MAX_RETR,
  45         .dot11MeshTTL = MESH_TTL,
  46         .element_ttl = MESH_DEFAULT_ELEMENT_TTL,
  47         .auto_open_plinks = true,
  48         .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
  49         .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
  50         .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
  51         .dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT,
  52         .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
  53         .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
  54         .path_refresh_time = MESH_PATH_REFRESH_TIME,
  55         .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
  56         .dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL,
  57         .dot11MeshGateAnnouncementProtocol = false,
  58 };
  59
  60 const struct mesh_setup default_mesh_setup = {
  61         .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
  62         .path_metric = IEEE80211_PATH_METRIC_AIRTIME,
  63         .ie = NULL,
  64         .ie_len = 0,
  65         .is_secure = false,
  66 };
  67
  68 int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
  69                          struct net_device *dev,
  70                          const struct mesh_setup *setup,
  71                          const struct mesh_config *conf)
  72 {
  73         struct wireless_dev *wdev = dev->ieee80211_ptr;
  74         int err;
  75
  76         BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
  77
  78         ASSERT_WDEV_LOCK(wdev);
  79
  80         if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
  81                 return -EOPNOTSUPP;
  82
  83         if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
  84               setup->is_secure)
  85                 return -EOPNOTSUPP;
  86
  87         if (wdev->mesh_id_len)
  88                 return -EALREADY;
  89
  90         if (!setup->mesh_id_len)
  91                 return -EINVAL;
  92
  93         if (!rdev->ops->join_mesh)
  94                 return -EOPNOTSUPP;
  95
  96         err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
  97         if (!err) {
  98                 memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
  99                 wdev->mesh_id_len = setup->mesh_id_len;
 100         }
 101
 102         return err;
 103 }
 104
 105 int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 106                        struct net_device *dev,
 107                        const struct mesh_setup *setup,
 108                        const struct mesh_config *conf)
 109 {
 110         struct wireless_dev *wdev = dev->ieee80211_ptr;
 111         int err;
 112
 113         wdev_lock(wdev);
 114         err = __cfg80211_join_mesh(rdev, dev, setup, conf);
 115         wdev_unlock(wdev);
 116
 117         return err;
 118 }
 119
 120 void cfg80211_notify_new_peer_candidate(struct net_device *dev,
 121                 const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
 122 {
 123         struct wireless_dev *wdev = dev->ieee80211_ptr;
 124
 125         if (WARN_ON(wdev->iftype != NL80211_IFTYPE_MESH_POINT))
 126                 return;
 127
 128         nl80211_send_new_peer_candidate(wiphy_to_dev(wdev->wiphy), dev,
 129                         macaddr, ie, ie_len, gfp);
 130 }
 131 EXPORT_SYMBOL(cfg80211_notify_new_peer_candidate);
 132
 133 static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 134                                  struct net_device *dev)
 135 {
 136         struct wireless_dev *wdev = dev->ieee80211_ptr;
 137         int err;
 138
 139         ASSERT_WDEV_LOCK(wdev);
 140
 141         if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
 142                 return -EOPNOTSUPP;
 143
 144         if (!rdev->ops->leave_mesh)
 145                 return -EOPNOTSUPP;
 146
 147         if (!wdev->mesh_id_len)
 148                 return -ENOTCONN;
 149
 150         err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
 151         if (!err)
 152                 wdev->mesh_id_len = 0;
 153         return err;
 154 }
 155
 156 int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 157                         struct net_device *dev)
 158 {
 159         struct wireless_dev *wdev = dev->ieee80211_ptr;
 160         int err;
 161
 162         wdev_lock(wdev);
 163         err = __cfg80211_leave_mesh(rdev, dev);
 164         wdev_unlock(wdev);
 165
 166         return err;
 167 }