2 * Copyright (C) 2003 Sistina Software Limited.
3 * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved.
5 * This file is released under the GPL.
8 #include "dm-bio-record.h"
10 #include <linux/init.h>
11 #include <linux/mempool.h>
12 #include <linux/module.h>
13 #include <linux/pagemap.h>
14 #include <linux/slab.h>
15 #include <linux/workqueue.h>
16 #include <linux/device-mapper.h>
17 #include <linux/dm-io.h>
18 #include <linux/dm-dirty-log.h>
19 #include <linux/dm-kcopyd.h>
20 #include <linux/dm-region-hash.h>
22 #define DM_MSG_PREFIX "raid1"
24 #define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */
26 #define DM_RAID1_HANDLE_ERRORS 0x01
27 #define DM_RAID1_KEEP_LOG 0x02
28 #define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS)
29 #define keep_log(p) ((p)->features & DM_RAID1_KEEP_LOG)
31 static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped
);
33 /*-----------------------------------------------------------------
34 * Mirror set structures.
35 *---------------------------------------------------------------*/
44 struct mirror_set
*ms
;
46 unsigned long error_type
;
53 struct list_head list
;
57 spinlock_t lock
; /* protects the lists */
58 struct bio_list reads
;
59 struct bio_list writes
;
60 struct bio_list failures
;
61 struct bio_list holds
; /* bios are waiting until suspend */
63 struct dm_region_hash
*rh
;
64 struct dm_kcopyd_client
*kcopyd_client
;
65 struct dm_io_client
*io_client
;
74 atomic_t default_mirror
; /* Default mirror */
76 struct workqueue_struct
*kmirrord_wq
;
77 struct work_struct kmirrord_work
;
78 struct timer_list timer
;
79 unsigned long timer_pending
;
81 struct work_struct trigger_event
;
84 struct mirror mirror
[0];
87 DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(raid1_resync_throttle
,
88 "A percentage of time allocated for raid resynchronization");
90 static void wakeup_mirrord(void *context
)
92 struct mirror_set
*ms
= context
;
94 queue_work(ms
->kmirrord_wq
, &ms
->kmirrord_work
);
97 static void delayed_wake_fn(unsigned long data
)
99 struct mirror_set
*ms
= (struct mirror_set
*) data
;
101 clear_bit(0, &ms
->timer_pending
);
105 static void delayed_wake(struct mirror_set
*ms
)
107 if (test_and_set_bit(0, &ms
->timer_pending
))
110 ms
->timer
.expires
= jiffies
+ HZ
/ 5;
111 ms
->timer
.data
= (unsigned long) ms
;
112 ms
->timer
.function
= delayed_wake_fn
;
113 add_timer(&ms
->timer
);
116 static void wakeup_all_recovery_waiters(void *context
)
118 wake_up_all(&_kmirrord_recovery_stopped
);
121 static void queue_bio(struct mirror_set
*ms
, struct bio
*bio
, int rw
)
127 bl
= (rw
== WRITE
) ? &ms
->writes
: &ms
->reads
;
128 spin_lock_irqsave(&ms
->lock
, flags
);
129 should_wake
= !(bl
->head
);
130 bio_list_add(bl
, bio
);
131 spin_unlock_irqrestore(&ms
->lock
, flags
);
137 static void dispatch_bios(void *context
, struct bio_list
*bio_list
)
139 struct mirror_set
*ms
= context
;
142 while ((bio
= bio_list_pop(bio_list
)))
143 queue_bio(ms
, bio
, WRITE
);
146 struct dm_raid1_bio_record
{
148 /* if details->bi_bdev == NULL, details were not saved */
149 struct dm_bio_details details
;
150 region_t write_region
;
154 * Every mirror should look like this one.
156 #define DEFAULT_MIRROR 0
159 * This is yucky. We squirrel the mirror struct away inside
160 * bi_next for read/write buffers. This is safe since the bh
161 * doesn't get submitted to the lower levels of block layer.
163 static struct mirror
*bio_get_m(struct bio
*bio
)
165 return (struct mirror
*) bio
->bi_next
;
168 static void bio_set_m(struct bio
*bio
, struct mirror
*m
)
170 bio
->bi_next
= (struct bio
*) m
;
173 static struct mirror
*get_default_mirror(struct mirror_set
*ms
)
175 return &ms
->mirror
[atomic_read(&ms
->default_mirror
)];
178 static void set_default_mirror(struct mirror
*m
)
180 struct mirror_set
*ms
= m
->ms
;
181 struct mirror
*m0
= &(ms
->mirror
[0]);
183 atomic_set(&ms
->default_mirror
, m
- m0
);
186 static struct mirror
*get_valid_mirror(struct mirror_set
*ms
)
190 for (m
= ms
->mirror
; m
< ms
->mirror
+ ms
->nr_mirrors
; m
++)
191 if (!atomic_read(&m
->error_count
))
198 * @m: mirror device to fail
199 * @error_type: one of the enum's, DM_RAID1_*_ERROR
201 * If errors are being handled, record the type of
202 * error encountered for this device. If this type
203 * of error has already been recorded, we can return;
204 * otherwise, we must signal userspace by triggering
205 * an event. Additionally, if the device is the
206 * primary device, we must choose a new primary, but
207 * only if the mirror is in-sync.
209 * This function must not block.
211 static void fail_mirror(struct mirror
*m
, enum dm_raid1_error error_type
)
213 struct mirror_set
*ms
= m
->ms
;
219 * error_count is used for nothing more than a
220 * simple way to tell if a device has encountered
223 atomic_inc(&m
->error_count
);
225 if (test_and_set_bit(error_type
, &m
->error_type
))
228 if (!errors_handled(ms
))
231 if (m
!= get_default_mirror(ms
))
234 if (!ms
->in_sync
&& !keep_log(ms
)) {
236 * Better to issue requests to same failing device
237 * than to risk returning corrupt data.
239 DMERR("Primary mirror (%s) failed while out-of-sync: "
240 "Reads may fail.", m
->dev
->name
);
244 new = get_valid_mirror(ms
);
246 set_default_mirror(new);
248 DMWARN("All sides of mirror have failed.");
251 schedule_work(&ms
->trigger_event
);
254 static int mirror_flush(struct dm_target
*ti
)
256 struct mirror_set
*ms
= ti
->private;
257 unsigned long error_bits
;
260 struct dm_io_region io
[ms
->nr_mirrors
];
262 struct dm_io_request io_req
= {
263 .bi_op
= REQ_OP_WRITE
,
264 .bi_op_flags
= WRITE_FLUSH
,
265 .mem
.type
= DM_IO_KMEM
,
266 .mem
.ptr
.addr
= NULL
,
267 .client
= ms
->io_client
,
270 for (i
= 0, m
= ms
->mirror
; i
< ms
->nr_mirrors
; i
++, m
++) {
271 io
[i
].bdev
= m
->dev
->bdev
;
277 dm_io(&io_req
, ms
->nr_mirrors
, io
, &error_bits
);
278 if (unlikely(error_bits
!= 0)) {
279 for (i
= 0; i
< ms
->nr_mirrors
; i
++)
280 if (test_bit(i
, &error_bits
))
281 fail_mirror(ms
->mirror
+ i
,
282 DM_RAID1_FLUSH_ERROR
);
289 /*-----------------------------------------------------------------
292 * When a mirror is first activated we may find that some regions
293 * are in the no-sync state. We have to recover these by
294 * recopying from the default mirror to all the others.
295 *---------------------------------------------------------------*/
296 static void recovery_complete(int read_err
, unsigned long write_err
,
299 struct dm_region
*reg
= context
;
300 struct mirror_set
*ms
= dm_rh_region_context(reg
);
304 /* Read error means the failure of default mirror. */
305 DMERR_LIMIT("Unable to read primary mirror during recovery");
306 fail_mirror(get_default_mirror(ms
), DM_RAID1_SYNC_ERROR
);
310 DMERR_LIMIT("Write error during recovery (error = 0x%lx)",
313 * Bits correspond to devices (excluding default mirror).
314 * The default mirror cannot change during recovery.
316 for (m
= 0; m
< ms
->nr_mirrors
; m
++) {
317 if (&ms
->mirror
[m
] == get_default_mirror(ms
))
319 if (test_bit(bit
, &write_err
))
320 fail_mirror(ms
->mirror
+ m
,
321 DM_RAID1_SYNC_ERROR
);
326 dm_rh_recovery_end(reg
, !(read_err
|| write_err
));
329 static int recover(struct mirror_set
*ms
, struct dm_region
*reg
)
333 struct dm_io_region from
, to
[DM_KCOPYD_MAX_REGIONS
], *dest
;
335 unsigned long flags
= 0;
336 region_t key
= dm_rh_get_region_key(reg
);
337 sector_t region_size
= dm_rh_get_region_size(ms
->rh
);
339 /* fill in the source */
340 m
= get_default_mirror(ms
);
341 from
.bdev
= m
->dev
->bdev
;
342 from
.sector
= m
->offset
+ dm_rh_region_to_sector(ms
->rh
, key
);
343 if (key
== (ms
->nr_regions
- 1)) {
345 * The final region may be smaller than
348 from
.count
= ms
->ti
->len
& (region_size
- 1);
350 from
.count
= region_size
;
352 from
.count
= region_size
;
354 /* fill in the destinations */
355 for (i
= 0, dest
= to
; i
< ms
->nr_mirrors
; i
++) {
356 if (&ms
->mirror
[i
] == get_default_mirror(ms
))
360 dest
->bdev
= m
->dev
->bdev
;
361 dest
->sector
= m
->offset
+ dm_rh_region_to_sector(ms
->rh
, key
);
362 dest
->count
= from
.count
;
367 if (!errors_handled(ms
))
368 set_bit(DM_KCOPYD_IGNORE_ERROR
, &flags
);
370 r
= dm_kcopyd_copy(ms
->kcopyd_client
, &from
, ms
->nr_mirrors
- 1, to
,
371 flags
, recovery_complete
, reg
);
376 static void reset_ms_flags(struct mirror_set
*ms
)
381 for (m
= 0; m
< ms
->nr_mirrors
; m
++) {
382 atomic_set(&(ms
->mirror
[m
].error_count
), 0);
383 ms
->mirror
[m
].error_type
= 0;
387 static void do_recovery(struct mirror_set
*ms
)
389 struct dm_region
*reg
;
390 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
394 * Start quiescing some regions.
396 dm_rh_recovery_prepare(ms
->rh
);
399 * Copy any already quiesced regions.
401 while ((reg
= dm_rh_recovery_start(ms
->rh
))) {
402 r
= recover(ms
, reg
);
404 dm_rh_recovery_end(reg
, 0);
408 * Update the in sync flag.
411 (log
->type
->get_sync_count(log
) == ms
->nr_regions
)) {
412 /* the sync is complete */
413 dm_table_event(ms
->ti
->table
);
419 /*-----------------------------------------------------------------
421 *---------------------------------------------------------------*/
422 static struct mirror
*choose_mirror(struct mirror_set
*ms
, sector_t sector
)
424 struct mirror
*m
= get_default_mirror(ms
);
427 if (likely(!atomic_read(&m
->error_count
)))
430 if (m
-- == ms
->mirror
)
432 } while (m
!= get_default_mirror(ms
));
437 static int default_ok(struct mirror
*m
)
439 struct mirror
*default_mirror
= get_default_mirror(m
->ms
);
441 return !atomic_read(&default_mirror
->error_count
);
444 static int mirror_available(struct mirror_set
*ms
, struct bio
*bio
)
446 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
447 region_t region
= dm_rh_bio_to_region(ms
->rh
, bio
);
449 if (log
->type
->in_sync(log
, region
, 0))
450 return choose_mirror(ms
, bio
->bi_iter
.bi_sector
) ? 1 : 0;
456 * remap a buffer to a particular mirror.
458 static sector_t
map_sector(struct mirror
*m
, struct bio
*bio
)
460 if (unlikely(!bio
->bi_iter
.bi_size
))
462 return m
->offset
+ dm_target_offset(m
->ms
->ti
, bio
->bi_iter
.bi_sector
);
465 static void map_bio(struct mirror
*m
, struct bio
*bio
)
467 bio
->bi_bdev
= m
->dev
->bdev
;
468 bio
->bi_iter
.bi_sector
= map_sector(m
, bio
);
471 static void map_region(struct dm_io_region
*io
, struct mirror
*m
,
474 io
->bdev
= m
->dev
->bdev
;
475 io
->sector
= map_sector(m
, bio
);
476 io
->count
= bio_sectors(bio
);
479 static void hold_bio(struct mirror_set
*ms
, struct bio
*bio
)
482 * Lock is required to avoid race condition during suspend
485 spin_lock_irq(&ms
->lock
);
487 if (atomic_read(&ms
->suspend
)) {
488 spin_unlock_irq(&ms
->lock
);
491 * If device is suspended, complete the bio.
493 if (dm_noflush_suspending(ms
->ti
))
494 bio
->bi_error
= DM_ENDIO_REQUEUE
;
496 bio
->bi_error
= -EIO
;
503 * Hold bio until the suspend is complete.
505 bio_list_add(&ms
->holds
, bio
);
506 spin_unlock_irq(&ms
->lock
);
509 /*-----------------------------------------------------------------
511 *---------------------------------------------------------------*/
512 static void read_callback(unsigned long error
, void *context
)
514 struct bio
*bio
= context
;
518 bio_set_m(bio
, NULL
);
520 if (likely(!error
)) {
525 fail_mirror(m
, DM_RAID1_READ_ERROR
);
527 if (likely(default_ok(m
)) || mirror_available(m
->ms
, bio
)) {
528 DMWARN_LIMIT("Read failure on mirror device %s. "
529 "Trying alternative device.",
531 queue_bio(m
->ms
, bio
, bio_data_dir(bio
));
535 DMERR_LIMIT("Read failure on mirror device %s. Failing I/O.",
540 /* Asynchronous read. */
541 static void read_async_bio(struct mirror
*m
, struct bio
*bio
)
543 struct dm_io_region io
;
544 struct dm_io_request io_req
= {
545 .bi_op
= REQ_OP_READ
,
547 .mem
.type
= DM_IO_BIO
,
549 .notify
.fn
= read_callback
,
550 .notify
.context
= bio
,
551 .client
= m
->ms
->io_client
,
554 map_region(&io
, m
, bio
);
556 BUG_ON(dm_io(&io_req
, 1, &io
, NULL
));
559 static inline int region_in_sync(struct mirror_set
*ms
, region_t region
,
562 int state
= dm_rh_get_state(ms
->rh
, region
, may_block
);
563 return state
== DM_RH_CLEAN
|| state
== DM_RH_DIRTY
;
566 static void do_reads(struct mirror_set
*ms
, struct bio_list
*reads
)
572 while ((bio
= bio_list_pop(reads
))) {
573 region
= dm_rh_bio_to_region(ms
->rh
, bio
);
574 m
= get_default_mirror(ms
);
577 * We can only read balance if the region is in sync.
579 if (likely(region_in_sync(ms
, region
, 1)))
580 m
= choose_mirror(ms
, bio
->bi_iter
.bi_sector
);
581 else if (m
&& atomic_read(&m
->error_count
))
585 read_async_bio(m
, bio
);
591 /*-----------------------------------------------------------------
594 * We do different things with the write io depending on the
595 * state of the region that it's in:
597 * SYNC: increment pending, use kcopyd to write to *all* mirrors
598 * RECOVERING: delay the io until recovery completes
599 * NOSYNC: increment pending, just write to the default mirror
600 *---------------------------------------------------------------*/
603 static void write_callback(unsigned long error
, void *context
)
606 struct bio
*bio
= (struct bio
*) context
;
607 struct mirror_set
*ms
;
611 ms
= bio_get_m(bio
)->ms
;
612 bio_set_m(bio
, NULL
);
615 * NOTE: We don't decrement the pending count here,
616 * instead it is done by the targets endio function.
617 * This way we handle both writes to SYNC and NOSYNC
618 * regions with the same code.
620 if (likely(!error
)) {
626 * If the bio is discard, return an error, but do not
629 if (bio_op(bio
) == REQ_OP_DISCARD
) {
630 bio
->bi_error
= -EOPNOTSUPP
;
635 for (i
= 0; i
< ms
->nr_mirrors
; i
++)
636 if (test_bit(i
, &error
))
637 fail_mirror(ms
->mirror
+ i
, DM_RAID1_WRITE_ERROR
);
640 * Need to raise event. Since raising
641 * events can block, we need to do it in
644 spin_lock_irqsave(&ms
->lock
, flags
);
645 if (!ms
->failures
.head
)
647 bio_list_add(&ms
->failures
, bio
);
648 spin_unlock_irqrestore(&ms
->lock
, flags
);
653 static void do_write(struct mirror_set
*ms
, struct bio
*bio
)
656 struct dm_io_region io
[ms
->nr_mirrors
], *dest
= io
;
658 struct dm_io_request io_req
= {
659 .bi_op
= REQ_OP_WRITE
,
660 .bi_op_flags
= bio
->bi_opf
& WRITE_FLUSH_FUA
,
661 .mem
.type
= DM_IO_BIO
,
663 .notify
.fn
= write_callback
,
664 .notify
.context
= bio
,
665 .client
= ms
->io_client
,
668 if (bio_op(bio
) == REQ_OP_DISCARD
) {
669 io_req
.bi_op
= REQ_OP_DISCARD
;
670 io_req
.mem
.type
= DM_IO_KMEM
;
671 io_req
.mem
.ptr
.addr
= NULL
;
674 for (i
= 0, m
= ms
->mirror
; i
< ms
->nr_mirrors
; i
++, m
++)
675 map_region(dest
++, m
, bio
);
678 * Use default mirror because we only need it to retrieve the reference
679 * to the mirror set in write_callback().
681 bio_set_m(bio
, get_default_mirror(ms
));
683 BUG_ON(dm_io(&io_req
, ms
->nr_mirrors
, io
, NULL
));
686 static void do_writes(struct mirror_set
*ms
, struct bio_list
*writes
)
690 struct bio_list sync
, nosync
, recover
, *this_list
= NULL
;
691 struct bio_list requeue
;
692 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
699 * Classify each write.
701 bio_list_init(&sync
);
702 bio_list_init(&nosync
);
703 bio_list_init(&recover
);
704 bio_list_init(&requeue
);
706 while ((bio
= bio_list_pop(writes
))) {
707 if ((bio
->bi_opf
& REQ_PREFLUSH
) ||
708 (bio_op(bio
) == REQ_OP_DISCARD
)) {
709 bio_list_add(&sync
, bio
);
713 region
= dm_rh_bio_to_region(ms
->rh
, bio
);
715 if (log
->type
->is_remote_recovering
&&
716 log
->type
->is_remote_recovering(log
, region
)) {
717 bio_list_add(&requeue
, bio
);
721 state
= dm_rh_get_state(ms
->rh
, region
, 1);
732 case DM_RH_RECOVERING
:
733 this_list
= &recover
;
737 bio_list_add(this_list
, bio
);
741 * Add bios that are delayed due to remote recovery
742 * back on to the write queue
744 if (unlikely(requeue
.head
)) {
745 spin_lock_irq(&ms
->lock
);
746 bio_list_merge(&ms
->writes
, &requeue
);
747 spin_unlock_irq(&ms
->lock
);
752 * Increment the pending counts for any regions that will
753 * be written to (writes to recover regions are going to
756 dm_rh_inc_pending(ms
->rh
, &sync
);
757 dm_rh_inc_pending(ms
->rh
, &nosync
);
760 * If the flush fails on a previous call and succeeds here,
761 * we must not reset the log_failure variable. We need
762 * userspace interaction to do that.
764 ms
->log_failure
= dm_rh_flush(ms
->rh
) ? 1 : ms
->log_failure
;
769 if (unlikely(ms
->log_failure
) && errors_handled(ms
)) {
770 spin_lock_irq(&ms
->lock
);
771 bio_list_merge(&ms
->failures
, &sync
);
772 spin_unlock_irq(&ms
->lock
);
775 while ((bio
= bio_list_pop(&sync
)))
778 while ((bio
= bio_list_pop(&recover
)))
779 dm_rh_delay(ms
->rh
, bio
);
781 while ((bio
= bio_list_pop(&nosync
))) {
782 if (unlikely(ms
->leg_failure
) && errors_handled(ms
) && !keep_log(ms
)) {
783 spin_lock_irq(&ms
->lock
);
784 bio_list_add(&ms
->failures
, bio
);
785 spin_unlock_irq(&ms
->lock
);
788 map_bio(get_default_mirror(ms
), bio
);
789 generic_make_request(bio
);
794 static void do_failures(struct mirror_set
*ms
, struct bio_list
*failures
)
798 if (likely(!failures
->head
))
802 * If the log has failed, unattempted writes are being
803 * put on the holds list. We can't issue those writes
804 * until a log has been marked, so we must store them.
806 * If a 'noflush' suspend is in progress, we can requeue
807 * the I/O's to the core. This give userspace a chance
808 * to reconfigure the mirror, at which point the core
809 * will reissue the writes. If the 'noflush' flag is
810 * not set, we have no choice but to return errors.
812 * Some writes on the failures list may have been
813 * submitted before the log failure and represent a
814 * failure to write to one of the devices. It is ok
815 * for us to treat them the same and requeue them
818 while ((bio
= bio_list_pop(failures
))) {
819 if (!ms
->log_failure
) {
821 dm_rh_mark_nosync(ms
->rh
, bio
);
825 * If all the legs are dead, fail the I/O.
826 * If the device has failed and keep_log is enabled,
829 * If we have been told to handle errors, and keep_log
830 * isn't enabled, hold the bio and wait for userspace to
831 * deal with the problem.
833 * Otherwise pretend that the I/O succeeded. (This would
834 * be wrong if the failed leg returned after reboot and
835 * got replicated back to the good legs.)
837 if (unlikely(!get_valid_mirror(ms
) || (keep_log(ms
) && ms
->log_failure
)))
839 else if (errors_handled(ms
) && !keep_log(ms
))
846 static void trigger_event(struct work_struct
*work
)
848 struct mirror_set
*ms
=
849 container_of(work
, struct mirror_set
, trigger_event
);
851 dm_table_event(ms
->ti
->table
);
854 /*-----------------------------------------------------------------
856 *---------------------------------------------------------------*/
857 static void do_mirror(struct work_struct
*work
)
859 struct mirror_set
*ms
= container_of(work
, struct mirror_set
,
861 struct bio_list reads
, writes
, failures
;
864 spin_lock_irqsave(&ms
->lock
, flags
);
867 failures
= ms
->failures
;
868 bio_list_init(&ms
->reads
);
869 bio_list_init(&ms
->writes
);
870 bio_list_init(&ms
->failures
);
871 spin_unlock_irqrestore(&ms
->lock
, flags
);
873 dm_rh_update_states(ms
->rh
, errors_handled(ms
));
875 do_reads(ms
, &reads
);
876 do_writes(ms
, &writes
);
877 do_failures(ms
, &failures
);
880 /*-----------------------------------------------------------------
882 *---------------------------------------------------------------*/
883 static struct mirror_set
*alloc_context(unsigned int nr_mirrors
,
884 uint32_t region_size
,
885 struct dm_target
*ti
,
886 struct dm_dirty_log
*dl
)
889 struct mirror_set
*ms
= NULL
;
891 len
= sizeof(*ms
) + (sizeof(ms
->mirror
[0]) * nr_mirrors
);
893 ms
= kzalloc(len
, GFP_KERNEL
);
895 ti
->error
= "Cannot allocate mirror context";
899 spin_lock_init(&ms
->lock
);
900 bio_list_init(&ms
->reads
);
901 bio_list_init(&ms
->writes
);
902 bio_list_init(&ms
->failures
);
903 bio_list_init(&ms
->holds
);
906 ms
->nr_mirrors
= nr_mirrors
;
907 ms
->nr_regions
= dm_sector_div_up(ti
->len
, region_size
);
911 atomic_set(&ms
->suspend
, 0);
912 atomic_set(&ms
->default_mirror
, DEFAULT_MIRROR
);
914 ms
->io_client
= dm_io_client_create();
915 if (IS_ERR(ms
->io_client
)) {
916 ti
->error
= "Error creating dm_io client";
921 ms
->rh
= dm_region_hash_create(ms
, dispatch_bios
, wakeup_mirrord
,
922 wakeup_all_recovery_waiters
,
923 ms
->ti
->begin
, MAX_RECOVERY
,
924 dl
, region_size
, ms
->nr_regions
);
925 if (IS_ERR(ms
->rh
)) {
926 ti
->error
= "Error creating dirty region hash";
927 dm_io_client_destroy(ms
->io_client
);
935 static void free_context(struct mirror_set
*ms
, struct dm_target
*ti
,
939 dm_put_device(ti
, ms
->mirror
[m
].dev
);
941 dm_io_client_destroy(ms
->io_client
);
942 dm_region_hash_destroy(ms
->rh
);
946 static int get_mirror(struct mirror_set
*ms
, struct dm_target
*ti
,
947 unsigned int mirror
, char **argv
)
949 unsigned long long offset
;
953 if (sscanf(argv
[1], "%llu%c", &offset
, &dummy
) != 1) {
954 ti
->error
= "Invalid offset";
958 ret
= dm_get_device(ti
, argv
[0], dm_table_get_mode(ti
->table
),
959 &ms
->mirror
[mirror
].dev
);
961 ti
->error
= "Device lookup failure";
965 ms
->mirror
[mirror
].ms
= ms
;
966 atomic_set(&(ms
->mirror
[mirror
].error_count
), 0);
967 ms
->mirror
[mirror
].error_type
= 0;
968 ms
->mirror
[mirror
].offset
= offset
;
974 * Create dirty log: log_type #log_params <log_params>
976 static struct dm_dirty_log
*create_dirty_log(struct dm_target
*ti
,
977 unsigned argc
, char **argv
,
980 unsigned param_count
;
981 struct dm_dirty_log
*dl
;
985 ti
->error
= "Insufficient mirror log arguments";
989 if (sscanf(argv
[1], "%u%c", ¶m_count
, &dummy
) != 1) {
990 ti
->error
= "Invalid mirror log argument count";
994 *args_used
= 2 + param_count
;
996 if (argc
< *args_used
) {
997 ti
->error
= "Insufficient mirror log arguments";
1001 dl
= dm_dirty_log_create(argv
[0], ti
, mirror_flush
, param_count
,
1004 ti
->error
= "Error creating mirror dirty log";
1011 static int parse_features(struct mirror_set
*ms
, unsigned argc
, char **argv
,
1012 unsigned *args_used
)
1014 unsigned num_features
;
1015 struct dm_target
*ti
= ms
->ti
;
1024 if (sscanf(argv
[0], "%u%c", &num_features
, &dummy
) != 1) {
1025 ti
->error
= "Invalid number of features";
1033 if (num_features
> argc
) {
1034 ti
->error
= "Not enough arguments to support feature count";
1038 for (i
= 0; i
< num_features
; i
++) {
1039 if (!strcmp("handle_errors", argv
[0]))
1040 ms
->features
|= DM_RAID1_HANDLE_ERRORS
;
1041 else if (!strcmp("keep_log", argv
[0]))
1042 ms
->features
|= DM_RAID1_KEEP_LOG
;
1044 ti
->error
= "Unrecognised feature requested";
1052 if (!errors_handled(ms
) && keep_log(ms
)) {
1053 ti
->error
= "keep_log feature requires the handle_errors feature";
1061 * Construct a mirror mapping:
1063 * log_type #log_params <log_params>
1064 * #mirrors [mirror_path offset]{2,}
1065 * [#features <features>]
1067 * log_type is "core" or "disk"
1068 * #log_params is between 1 and 3
1070 * If present, supported features are "handle_errors" and "keep_log".
1072 static int mirror_ctr(struct dm_target
*ti
, unsigned int argc
, char **argv
)
1075 unsigned int nr_mirrors
, m
, args_used
;
1076 struct mirror_set
*ms
;
1077 struct dm_dirty_log
*dl
;
1080 dl
= create_dirty_log(ti
, argc
, argv
, &args_used
);
1087 if (!argc
|| sscanf(argv
[0], "%u%c", &nr_mirrors
, &dummy
) != 1 ||
1088 nr_mirrors
< 2 || nr_mirrors
> DM_KCOPYD_MAX_REGIONS
+ 1) {
1089 ti
->error
= "Invalid number of mirrors";
1090 dm_dirty_log_destroy(dl
);
1096 if (argc
< nr_mirrors
* 2) {
1097 ti
->error
= "Too few mirror arguments";
1098 dm_dirty_log_destroy(dl
);
1102 ms
= alloc_context(nr_mirrors
, dl
->type
->get_region_size(dl
), ti
, dl
);
1104 dm_dirty_log_destroy(dl
);
1108 /* Get the mirror parameter sets */
1109 for (m
= 0; m
< nr_mirrors
; m
++) {
1110 r
= get_mirror(ms
, ti
, m
, argv
);
1112 free_context(ms
, ti
, m
);
1121 r
= dm_set_target_max_io_len(ti
, dm_rh_get_region_size(ms
->rh
));
1123 goto err_free_context
;
1125 ti
->num_flush_bios
= 1;
1126 ti
->num_discard_bios
= 1;
1127 ti
->per_io_data_size
= sizeof(struct dm_raid1_bio_record
);
1128 ti
->discard_zeroes_data_unsupported
= true;
1130 ms
->kmirrord_wq
= alloc_workqueue("kmirrord", WQ_MEM_RECLAIM
, 0);
1131 if (!ms
->kmirrord_wq
) {
1132 DMERR("couldn't start kmirrord");
1134 goto err_free_context
;
1136 INIT_WORK(&ms
->kmirrord_work
, do_mirror
);
1137 init_timer(&ms
->timer
);
1138 ms
->timer_pending
= 0;
1139 INIT_WORK(&ms
->trigger_event
, trigger_event
);
1141 r
= parse_features(ms
, argc
, argv
, &args_used
);
1143 goto err_destroy_wq
;
1149 * Any read-balancing addition depends on the
1150 * DM_RAID1_HANDLE_ERRORS flag being present.
1151 * This is because the decision to balance depends
1152 * on the sync state of a region. If the above
1153 * flag is not present, we ignore errors; and
1154 * the sync state may be inaccurate.
1158 ti
->error
= "Too many mirror arguments";
1160 goto err_destroy_wq
;
1163 ms
->kcopyd_client
= dm_kcopyd_client_create(&dm_kcopyd_throttle
);
1164 if (IS_ERR(ms
->kcopyd_client
)) {
1165 r
= PTR_ERR(ms
->kcopyd_client
);
1166 goto err_destroy_wq
;
1173 destroy_workqueue(ms
->kmirrord_wq
);
1175 free_context(ms
, ti
, ms
->nr_mirrors
);
1179 static void mirror_dtr(struct dm_target
*ti
)
1181 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1183 del_timer_sync(&ms
->timer
);
1184 flush_workqueue(ms
->kmirrord_wq
);
1185 flush_work(&ms
->trigger_event
);
1186 dm_kcopyd_client_destroy(ms
->kcopyd_client
);
1187 destroy_workqueue(ms
->kmirrord_wq
);
1188 free_context(ms
, ti
, ms
->nr_mirrors
);
1192 * Mirror mapping function
1194 static int mirror_map(struct dm_target
*ti
, struct bio
*bio
)
1196 int r
, rw
= bio_data_dir(bio
);
1198 struct mirror_set
*ms
= ti
->private;
1199 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1200 struct dm_raid1_bio_record
*bio_record
=
1201 dm_per_bio_data(bio
, sizeof(struct dm_raid1_bio_record
));
1203 bio_record
->details
.bi_bdev
= NULL
;
1206 /* Save region for mirror_end_io() handler */
1207 bio_record
->write_region
= dm_rh_bio_to_region(ms
->rh
, bio
);
1208 queue_bio(ms
, bio
, rw
);
1209 return DM_MAPIO_SUBMITTED
;
1212 r
= log
->type
->in_sync(log
, dm_rh_bio_to_region(ms
->rh
, bio
), 0);
1213 if (r
< 0 && r
!= -EWOULDBLOCK
)
1217 * If region is not in-sync queue the bio.
1219 if (!r
|| (r
== -EWOULDBLOCK
)) {
1220 if (bio
->bi_opf
& REQ_RAHEAD
)
1221 return -EWOULDBLOCK
;
1223 queue_bio(ms
, bio
, rw
);
1224 return DM_MAPIO_SUBMITTED
;
1228 * The region is in-sync and we can perform reads directly.
1229 * Store enough information so we can retry if it fails.
1231 m
= choose_mirror(ms
, bio
->bi_iter
.bi_sector
);
1235 dm_bio_record(&bio_record
->details
, bio
);
1240 return DM_MAPIO_REMAPPED
;
1243 static int mirror_end_io(struct dm_target
*ti
, struct bio
*bio
, int error
)
1245 int rw
= bio_data_dir(bio
);
1246 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1247 struct mirror
*m
= NULL
;
1248 struct dm_bio_details
*bd
= NULL
;
1249 struct dm_raid1_bio_record
*bio_record
=
1250 dm_per_bio_data(bio
, sizeof(struct dm_raid1_bio_record
));
1253 * We need to dec pending if this was a write.
1256 if (!(bio
->bi_opf
& REQ_PREFLUSH
) &&
1257 bio_op(bio
) != REQ_OP_DISCARD
)
1258 dm_rh_dec(ms
->rh
, bio_record
->write_region
);
1262 if (error
== -EOPNOTSUPP
)
1265 if ((error
== -EWOULDBLOCK
) && (bio
->bi_opf
& REQ_RAHEAD
))
1268 if (unlikely(error
)) {
1269 if (!bio_record
->details
.bi_bdev
) {
1271 * There wasn't enough memory to record necessary
1272 * information for a retry or there was no other
1275 DMERR_LIMIT("Mirror read failed.");
1281 DMERR("Mirror read failed from %s. Trying alternative device.",
1284 fail_mirror(m
, DM_RAID1_READ_ERROR
);
1287 * A failed read is requeued for another attempt using an intact
1290 if (default_ok(m
) || mirror_available(ms
, bio
)) {
1291 bd
= &bio_record
->details
;
1293 dm_bio_restore(bd
, bio
);
1294 bio_record
->details
.bi_bdev
= NULL
;
1296 queue_bio(ms
, bio
, rw
);
1297 return DM_ENDIO_INCOMPLETE
;
1299 DMERR("All replicated volumes dead, failing I/O");
1303 bio_record
->details
.bi_bdev
= NULL
;
1308 static void mirror_presuspend(struct dm_target
*ti
)
1310 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1311 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1313 struct bio_list holds
;
1316 atomic_set(&ms
->suspend
, 1);
1319 * Process bios in the hold list to start recovery waiting
1320 * for bios in the hold list. After the process, no bio has
1321 * a chance to be added in the hold list because ms->suspend
1324 spin_lock_irq(&ms
->lock
);
1326 bio_list_init(&ms
->holds
);
1327 spin_unlock_irq(&ms
->lock
);
1329 while ((bio
= bio_list_pop(&holds
)))
1333 * We must finish up all the work that we've
1334 * generated (i.e. recovery work).
1336 dm_rh_stop_recovery(ms
->rh
);
1338 wait_event(_kmirrord_recovery_stopped
,
1339 !dm_rh_recovery_in_flight(ms
->rh
));
1341 if (log
->type
->presuspend
&& log
->type
->presuspend(log
))
1342 /* FIXME: need better error handling */
1343 DMWARN("log presuspend failed");
1346 * Now that recovery is complete/stopped and the
1347 * delayed bios are queued, we need to wait for
1348 * the worker thread to complete. This way,
1349 * we know that all of our I/O has been pushed.
1351 flush_workqueue(ms
->kmirrord_wq
);
1354 static void mirror_postsuspend(struct dm_target
*ti
)
1356 struct mirror_set
*ms
= ti
->private;
1357 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1359 if (log
->type
->postsuspend
&& log
->type
->postsuspend(log
))
1360 /* FIXME: need better error handling */
1361 DMWARN("log postsuspend failed");
1364 static void mirror_resume(struct dm_target
*ti
)
1366 struct mirror_set
*ms
= ti
->private;
1367 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1369 atomic_set(&ms
->suspend
, 0);
1370 if (log
->type
->resume
&& log
->type
->resume(log
))
1371 /* FIXME: need better error handling */
1372 DMWARN("log resume failed");
1373 dm_rh_start_recovery(ms
->rh
);
1377 * device_status_char
1378 * @m: mirror device/leg we want the status of
1380 * We return one character representing the most severe error
1381 * we have encountered.
1382 * A => Alive - No failures
1383 * D => Dead - A write failure occurred leaving mirror out-of-sync
1384 * S => Sync - A sychronization failure occurred, mirror out-of-sync
1385 * R => Read - A read failure occurred, mirror data unaffected
1389 static char device_status_char(struct mirror
*m
)
1391 if (!atomic_read(&(m
->error_count
)))
1394 return (test_bit(DM_RAID1_FLUSH_ERROR
, &(m
->error_type
))) ? 'F' :
1395 (test_bit(DM_RAID1_WRITE_ERROR
, &(m
->error_type
))) ? 'D' :
1396 (test_bit(DM_RAID1_SYNC_ERROR
, &(m
->error_type
))) ? 'S' :
1397 (test_bit(DM_RAID1_READ_ERROR
, &(m
->error_type
))) ? 'R' : 'U';
1401 static void mirror_status(struct dm_target
*ti
, status_type_t type
,
1402 unsigned status_flags
, char *result
, unsigned maxlen
)
1404 unsigned int m
, sz
= 0;
1405 int num_feature_args
= 0;
1406 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1407 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1408 char buffer
[ms
->nr_mirrors
+ 1];
1411 case STATUSTYPE_INFO
:
1412 DMEMIT("%d ", ms
->nr_mirrors
);
1413 for (m
= 0; m
< ms
->nr_mirrors
; m
++) {
1414 DMEMIT("%s ", ms
->mirror
[m
].dev
->name
);
1415 buffer
[m
] = device_status_char(&(ms
->mirror
[m
]));
1419 DMEMIT("%llu/%llu 1 %s ",
1420 (unsigned long long)log
->type
->get_sync_count(log
),
1421 (unsigned long long)ms
->nr_regions
, buffer
);
1423 sz
+= log
->type
->status(log
, type
, result
+sz
, maxlen
-sz
);
1427 case STATUSTYPE_TABLE
:
1428 sz
= log
->type
->status(log
, type
, result
, maxlen
);
1430 DMEMIT("%d", ms
->nr_mirrors
);
1431 for (m
= 0; m
< ms
->nr_mirrors
; m
++)
1432 DMEMIT(" %s %llu", ms
->mirror
[m
].dev
->name
,
1433 (unsigned long long)ms
->mirror
[m
].offset
);
1435 num_feature_args
+= !!errors_handled(ms
);
1436 num_feature_args
+= !!keep_log(ms
);
1437 if (num_feature_args
) {
1438 DMEMIT(" %d", num_feature_args
);
1439 if (errors_handled(ms
))
1440 DMEMIT(" handle_errors");
1442 DMEMIT(" keep_log");
1449 static int mirror_iterate_devices(struct dm_target
*ti
,
1450 iterate_devices_callout_fn fn
, void *data
)
1452 struct mirror_set
*ms
= ti
->private;
1456 for (i
= 0; !ret
&& i
< ms
->nr_mirrors
; i
++)
1457 ret
= fn(ti
, ms
->mirror
[i
].dev
,
1458 ms
->mirror
[i
].offset
, ti
->len
, data
);
1463 static struct target_type mirror_target
= {
1465 .version
= {1, 14, 0},
1466 .module
= THIS_MODULE
,
1470 .end_io
= mirror_end_io
,
1471 .presuspend
= mirror_presuspend
,
1472 .postsuspend
= mirror_postsuspend
,
1473 .resume
= mirror_resume
,
1474 .status
= mirror_status
,
1475 .iterate_devices
= mirror_iterate_devices
,
1478 static int __init
dm_mirror_init(void)
1482 r
= dm_register_target(&mirror_target
);
1484 DMERR("Failed to register mirror target");
1494 static void __exit
dm_mirror_exit(void)
1496 dm_unregister_target(&mirror_target
);
1500 module_init(dm_mirror_init
);
1501 module_exit(dm_mirror_exit
);
1503 MODULE_DESCRIPTION(DM_NAME
" mirror target");
1504 MODULE_AUTHOR("Joe Thornber");
1505 MODULE_LICENSE("GPL");