2 * net/tipc/node.c: TIPC node management routines
4 * Copyright (c) 2000-2006, Ericsson AB
5 * Copyright (c) 2005-2006, Wind River Systems
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
40 #include "name_distr.h"
42 static void node_lost_contact(struct tipc_node
*n_ptr
);
43 static void node_established_contact(struct tipc_node
*n_ptr
);
45 static DEFINE_SPINLOCK(node_create_lock
);
50 * tipc_node_create - create neighboring node
52 * Currently, this routine is called by neighbor discovery code, which holds
53 * net_lock for reading only. We must take node_create_lock to ensure a node
54 * isn't created twice if two different bearers discover the node at the same
55 * time. (It would be preferable to switch to holding net_lock in write mode,
56 * but this is a non-trivial change.)
59 struct tipc_node
*tipc_node_create(u32 addr
)
61 struct tipc_node
*n_ptr
;
64 spin_lock_bh(&node_create_lock
);
66 n_ptr
= tipc_node_find(addr
);
68 spin_unlock_bh(&node_create_lock
);
72 n_ptr
= kzalloc(sizeof(*n_ptr
), GFP_ATOMIC
);
74 spin_unlock_bh(&node_create_lock
);
75 warn("Node creation failed, no memory\n");
80 spin_lock_init(&n_ptr
->lock
);
81 INIT_LIST_HEAD(&n_ptr
->nsub
);
83 n_num
= tipc_node(addr
);
84 tipc_net
.nodes
[n_num
] = n_ptr
;
85 if (n_num
> tipc_net
.highest_node
)
86 tipc_net
.highest_node
= n_num
;
88 spin_unlock_bh(&node_create_lock
);
92 void tipc_node_delete(struct tipc_node
*n_ptr
)
99 n_num
= tipc_node(n_ptr
->addr
);
100 tipc_net
.nodes
[n_num
] = NULL
;
103 while (!tipc_net
.nodes
[tipc_net
.highest_node
])
104 if (--tipc_net
.highest_node
== 0)
110 * tipc_node_link_up - handle addition of link
112 * Link becomes active (alone or shared) or standby, depending on its priority.
115 void tipc_node_link_up(struct tipc_node
*n_ptr
, struct link
*l_ptr
)
117 struct link
**active
= &n_ptr
->active_links
[0];
119 n_ptr
->working_links
++;
121 info("Established link <%s> on network plane %c\n",
122 l_ptr
->name
, l_ptr
->b_ptr
->net_plane
);
125 active
[0] = active
[1] = l_ptr
;
126 node_established_contact(n_ptr
);
129 if (l_ptr
->priority
< active
[0]->priority
) {
130 info("New link <%s> becomes standby\n", l_ptr
->name
);
133 tipc_link_send_duplicate(active
[0], l_ptr
);
134 if (l_ptr
->priority
== active
[0]->priority
) {
138 info("Old link <%s> becomes standby\n", active
[0]->name
);
139 if (active
[1] != active
[0])
140 info("Old link <%s> becomes standby\n", active
[1]->name
);
141 active
[0] = active
[1] = l_ptr
;
145 * node_select_active_links - select active link
148 static void node_select_active_links(struct tipc_node
*n_ptr
)
150 struct link
**active
= &n_ptr
->active_links
[0];
152 u32 highest_prio
= 0;
154 active
[0] = active
[1] = NULL
;
156 for (i
= 0; i
< MAX_BEARERS
; i
++) {
157 struct link
*l_ptr
= n_ptr
->links
[i
];
159 if (!l_ptr
|| !tipc_link_is_up(l_ptr
) ||
160 (l_ptr
->priority
< highest_prio
))
163 if (l_ptr
->priority
> highest_prio
) {
164 highest_prio
= l_ptr
->priority
;
165 active
[0] = active
[1] = l_ptr
;
173 * tipc_node_link_down - handle loss of link
176 void tipc_node_link_down(struct tipc_node
*n_ptr
, struct link
*l_ptr
)
178 struct link
**active
;
180 n_ptr
->working_links
--;
182 if (!tipc_link_is_active(l_ptr
)) {
183 info("Lost standby link <%s> on network plane %c\n",
184 l_ptr
->name
, l_ptr
->b_ptr
->net_plane
);
187 info("Lost link <%s> on network plane %c\n",
188 l_ptr
->name
, l_ptr
->b_ptr
->net_plane
);
190 active
= &n_ptr
->active_links
[0];
191 if (active
[0] == l_ptr
)
192 active
[0] = active
[1];
193 if (active
[1] == l_ptr
)
194 active
[1] = active
[0];
195 if (active
[0] == l_ptr
)
196 node_select_active_links(n_ptr
);
197 if (tipc_node_is_up(n_ptr
))
198 tipc_link_changeover(l_ptr
);
200 node_lost_contact(n_ptr
);
203 int tipc_node_has_active_links(struct tipc_node
*n_ptr
)
205 return n_ptr
->active_links
[0] != NULL
;
208 int tipc_node_has_redundant_links(struct tipc_node
*n_ptr
)
210 return n_ptr
->working_links
> 1;
213 int tipc_node_is_up(struct tipc_node
*n_ptr
)
215 return tipc_node_has_active_links(n_ptr
);
218 struct tipc_node
*tipc_node_attach_link(struct link
*l_ptr
)
220 struct tipc_node
*n_ptr
= tipc_node_find(l_ptr
->addr
);
223 n_ptr
= tipc_node_create(l_ptr
->addr
);
225 u32 bearer_id
= l_ptr
->b_ptr
->identity
;
226 char addr_string
[16];
228 if (n_ptr
->link_cnt
>= 2) {
229 err("Attempt to create third link to %s\n",
230 tipc_addr_string_fill(addr_string
, n_ptr
->addr
));
234 if (!n_ptr
->links
[bearer_id
]) {
235 n_ptr
->links
[bearer_id
] = l_ptr
;
240 err("Attempt to establish second link on <%s> to %s\n",
241 l_ptr
->b_ptr
->publ
.name
,
242 tipc_addr_string_fill(addr_string
, l_ptr
->addr
));
247 void tipc_node_detach_link(struct tipc_node
*n_ptr
, struct link
*l_ptr
)
249 n_ptr
->links
[l_ptr
->b_ptr
->identity
] = NULL
;
255 * Routing table management - five cases to handle:
257 * 1: A link towards a zone/cluster external node comes up.
258 * => Send a multicast message updating routing tables of all
259 * system nodes within own cluster that the new destination
260 * can be reached via this node.
261 * (node.establishedContact()=>cluster.multicastNewRoute())
263 * 2: A link towards a slave node comes up.
264 * => Send a multicast message updating routing tables of all
265 * system nodes within own cluster that the new destination
266 * can be reached via this node.
267 * (node.establishedContact()=>cluster.multicastNewRoute())
268 * => Send a message to the slave node about existence
269 * of all system nodes within cluster:
270 * (node.establishedContact()=>cluster.sendLocalRoutes())
272 * 3: A new cluster local system node becomes available.
273 * => Send message(s) to this particular node containing
274 * information about all cluster external and slave
275 * nodes which can be reached via this node.
276 * (node.establishedContact()==>network.sendExternalRoutes())
277 * (node.establishedContact()==>network.sendSlaveRoutes())
278 * => Send messages to all directly connected slave nodes
279 * containing information about the existence of the new node
280 * (node.establishedContact()=>cluster.multicastNewRoute())
282 * 4: The link towards a zone/cluster external node or slave
284 * => Send a multcast message updating routing tables of all
285 * nodes within cluster that the new destination can not any
286 * longer be reached via this node.
287 * (node.lostAllLinks()=>cluster.bcastLostRoute())
289 * 5: A cluster local system node becomes unavailable.
290 * => Remove all references to this node from the local
291 * routing tables. Note: This is a completely node
293 * (node.lostAllLinks()=>network.removeAsRouter())
294 * => Send messages to all directly connected slave nodes
295 * containing information about loss of the node
296 * (node.establishedContact()=>cluster.multicastLostRoute())
300 static void node_established_contact(struct tipc_node
*n_ptr
)
302 tipc_k_signal((Handler
)tipc_named_node_up
, n_ptr
->addr
);
304 /* Syncronize broadcast acks */
305 n_ptr
->bclink
.acked
= tipc_bclink_get_last_sent();
307 if (n_ptr
->bclink
.supported
) {
308 tipc_nmap_add(&tipc_bcast_nmap
, n_ptr
->addr
);
309 if (n_ptr
->addr
< tipc_own_addr
)
314 static void node_cleanup_finished(unsigned long node_addr
)
316 struct tipc_node
*n_ptr
;
318 read_lock_bh(&tipc_net_lock
);
319 n_ptr
= tipc_node_find(node_addr
);
321 tipc_node_lock(n_ptr
);
322 n_ptr
->cleanup_required
= 0;
323 tipc_node_unlock(n_ptr
);
325 read_unlock_bh(&tipc_net_lock
);
328 static void node_lost_contact(struct tipc_node
*n_ptr
)
330 struct tipc_node_subscr
*ns
, *tns
;
331 char addr_string
[16];
334 /* Clean up broadcast reception remains */
335 n_ptr
->bclink
.gap_after
= n_ptr
->bclink
.gap_to
= 0;
336 while (n_ptr
->bclink
.deferred_head
) {
337 struct sk_buff
*buf
= n_ptr
->bclink
.deferred_head
;
338 n_ptr
->bclink
.deferred_head
= buf
->next
;
341 if (n_ptr
->bclink
.defragm
) {
342 buf_discard(n_ptr
->bclink
.defragm
);
343 n_ptr
->bclink
.defragm
= NULL
;
346 if (n_ptr
->bclink
.supported
) {
347 tipc_bclink_acknowledge(n_ptr
,
348 mod(n_ptr
->bclink
.acked
+ 10000));
349 tipc_nmap_remove(&tipc_bcast_nmap
, n_ptr
->addr
);
350 if (n_ptr
->addr
< tipc_own_addr
)
354 info("Lost contact with %s\n",
355 tipc_addr_string_fill(addr_string
, n_ptr
->addr
));
357 /* Abort link changeover */
358 for (i
= 0; i
< MAX_BEARERS
; i
++) {
359 struct link
*l_ptr
= n_ptr
->links
[i
];
362 l_ptr
->reset_checkpoint
= l_ptr
->next_in_no
;
363 l_ptr
->exp_msg_count
= 0;
364 tipc_link_reset_fragments(l_ptr
);
367 /* Notify subscribers */
368 list_for_each_entry_safe(ns
, tns
, &n_ptr
->nsub
, nodesub_list
) {
370 list_del_init(&ns
->nodesub_list
);
371 tipc_k_signal((Handler
)ns
->handle_node_down
,
372 (unsigned long)ns
->usr_handle
);
375 /* Prevent re-contact with node until all cleanup is done */
377 n_ptr
->cleanup_required
= 1;
378 tipc_k_signal((Handler
)node_cleanup_finished
, n_ptr
->addr
);
381 struct sk_buff
*tipc_node_get_nodes(const void *req_tlv_area
, int req_tlv_space
)
385 struct tipc_node
*n_ptr
;
386 struct tipc_node_info node_info
;
390 if (!TLV_CHECK(req_tlv_area
, req_tlv_space
, TIPC_TLV_NET_ADDR
))
391 return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR
);
393 domain
= ntohl(*(__be32
*)TLV_DATA(req_tlv_area
));
394 if (!tipc_addr_domain_valid(domain
))
395 return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
396 " (network address)");
398 read_lock_bh(&tipc_net_lock
);
399 if (!tipc_net
.nodes
) {
400 read_unlock_bh(&tipc_net_lock
);
401 return tipc_cfg_reply_none();
404 /* For now, get space for all other nodes */
406 payload_size
= TLV_SPACE(sizeof(node_info
)) *
407 (tipc_net
.highest_node
- 1);
408 if (payload_size
> 32768u) {
409 read_unlock_bh(&tipc_net_lock
);
410 return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
411 " (too many nodes)");
413 buf
= tipc_cfg_reply_alloc(payload_size
);
415 read_unlock_bh(&tipc_net_lock
);
419 /* Add TLVs for all nodes in scope */
421 for (n_num
= 1; n_num
<= tipc_net
.highest_node
; n_num
++) {
422 n_ptr
= tipc_net
.nodes
[n_num
];
423 if (!n_ptr
|| !tipc_in_scope(domain
, n_ptr
->addr
))
425 node_info
.addr
= htonl(n_ptr
->addr
);
426 node_info
.up
= htonl(tipc_node_is_up(n_ptr
));
427 tipc_cfg_append_tlv(buf
, TIPC_TLV_NODE_INFO
,
428 &node_info
, sizeof(node_info
));
431 read_unlock_bh(&tipc_net_lock
);
435 struct sk_buff
*tipc_node_get_links(const void *req_tlv_area
, int req_tlv_space
)
439 struct tipc_node
*n_ptr
;
440 struct tipc_link_info link_info
;
444 if (!TLV_CHECK(req_tlv_area
, req_tlv_space
, TIPC_TLV_NET_ADDR
))
445 return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR
);
447 domain
= ntohl(*(__be32
*)TLV_DATA(req_tlv_area
));
448 if (!tipc_addr_domain_valid(domain
))
449 return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
450 " (network address)");
452 if (tipc_mode
!= TIPC_NET_MODE
)
453 return tipc_cfg_reply_none();
455 read_lock_bh(&tipc_net_lock
);
457 /* Get space for all unicast links + multicast link */
459 payload_size
= TLV_SPACE(sizeof(link_info
)) * (tipc_net
.links
+ 1);
460 if (payload_size
> 32768u) {
461 read_unlock_bh(&tipc_net_lock
);
462 return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
463 " (too many links)");
465 buf
= tipc_cfg_reply_alloc(payload_size
);
467 read_unlock_bh(&tipc_net_lock
);
471 /* Add TLV for broadcast link */
473 link_info
.dest
= htonl(tipc_own_addr
& 0xfffff00);
474 link_info
.up
= htonl(1);
475 strlcpy(link_info
.str
, tipc_bclink_name
, TIPC_MAX_LINK_NAME
);
476 tipc_cfg_append_tlv(buf
, TIPC_TLV_LINK_INFO
, &link_info
, sizeof(link_info
));
478 /* Add TLVs for any other links in scope */
480 for (n_num
= 1; n_num
<= tipc_net
.highest_node
; n_num
++) {
483 n_ptr
= tipc_net
.nodes
[n_num
];
484 if (!n_ptr
|| !tipc_in_scope(domain
, n_ptr
->addr
))
486 tipc_node_lock(n_ptr
);
487 for (i
= 0; i
< MAX_BEARERS
; i
++) {
488 if (!n_ptr
->links
[i
])
490 link_info
.dest
= htonl(n_ptr
->addr
);
491 link_info
.up
= htonl(tipc_link_is_up(n_ptr
->links
[i
]));
492 strcpy(link_info
.str
, n_ptr
->links
[i
]->name
);
493 tipc_cfg_append_tlv(buf
, TIPC_TLV_LINK_INFO
,
494 &link_info
, sizeof(link_info
));
496 tipc_node_unlock(n_ptr
);
499 read_unlock_bh(&tipc_net_lock
);