1 LEDs connected to is31fl319x LED controller chip
4 - compatible : Should be any of
11 - #address-cells: Must be 1.
12 - #size-cells: Must be 0.
13 - reg: 0x64, 0x65, 0x66, or 0x67.
16 - audio-gain-db : audio gain selection for external analog modulation input.
17 Valid values: 0 - 21, step by 3 (rounded down)
20 Each led is represented as a sub-node of the issi,is31fl319x device.
21 There can be less leds subnodes than the chip can support but not more.
23 Required led sub-node properties:
24 - reg : number of LED line
25 Valid values: 1 - number of leds supported by the chip variant.
27 Optional led sub-node properties:
28 - label : see Documentation/devicetree/bindings/leds/common.txt.
29 - linux,default-trigger :
30 see Documentation/devicetree/bindings/leds/common.txt.
31 - led-max-microamp : (optional)
32 Valid values: 5000 - 40000, step by 5000 (rounded down)
33 Default: 20000 (20 mA)
34 Note: a driver will take the lowest of all led limits since the
35 chip has a single global setting. The lowest value will be chosen
36 due to the PWM specificity, where lower brightness is achieved
37 by reducing the dury-cycle of pulses and not the current, which
38 will always have its peak value equal to led-max-microamp.
43 compatible = "issi,is31fl3196";
51 led-max-microamp = <10000>;
55 label = "green:power";
57 linux,default-trigger = "default-on";