?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / atm / solos-pci.c
blobc32f7dd9879ac59f2e48d47695e5c31d0afed2c4
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
4 * Traverse Technologies -- http://www.traverse.com.au/
5 * Xrio Limited -- http://www.xrio.com/
6 *
7 * Copyright © 2008 Traverse Technologies
8 * Copyright © 2008 Intel Corporation
9 *
10 * Authors: Nathan Williams <nathan@traverse.com.au>
11 * David Woodhouse <dwmw2@infradead.org>
12 * Treker Chen <treker@xrio.com>
13 */
14
15 #define DEBUG
16 #define VERBOSE_DEBUG
17
18 #include <linux/interrupt.h>
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/errno.h>
22 #include <linux/ioport.h>
23 #include <linux/types.h>
24 #include <linux/pci.h>
25 #include <linux/atm.h>
26 #include <linux/atmdev.h>
27 #include <linux/skbuff.h>
28 #include <linux/sysfs.h>
29 #include <linux/device.h>
30 #include <linux/kobject.h>
31 #include <linux/firmware.h>
32 #include <linux/ctype.h>
33 #include <linux/swab.h>
34 #include <linux/slab.h>
35
36 #define VERSION "1.04"
37 #define DRIVER_VERSION 0x01
38 #define PTAG "solos-pci"
39
40 #define CONFIG_RAM_SIZE 128
41 #define FLAGS_ADDR 0x7C
42 #define IRQ_EN_ADDR 0x78
43 #define FPGA_VER 0x74
44 #define IRQ_CLEAR 0x70
45 #define WRITE_FLASH 0x6C
46 #define PORTS 0x68
47 #define FLASH_BLOCK 0x64
48 #define FLASH_BUSY 0x60
49 #define FPGA_MODE 0x5C
50 #define FLASH_MODE 0x58
51 #define GPIO_STATUS 0x54
52 #define DRIVER_VER 0x50
53 #define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
54 #define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
55
56 #define DATA_RAM_SIZE 32768
57 #define BUF_SIZE 2048
58 #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
59 /* Old boards use ATMEL AD45DB161D flash */
60 #define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
61 #define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
62 #define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
63 #define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
64 /* Current boards use M25P/M25PE SPI flash */
65 #define SPI_FLASH_BLOCK (256 * 64)
66
67 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
68 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
69 #define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
70
71 #define RX_DMA_SIZE 2048
72
73 #define FPGA_VERSION(a,b) (((a) << 8) + (b))
74 #define LEGACY_BUFFERS 2
75 #define DMA_SUPPORTED 4
76
77 static int reset = 0;
78 static int atmdebug = 0;
79 static int firmware_upgrade = 0;
80 static int fpga_upgrade = 0;
81 static int db_firmware_upgrade = 0;
82 static int db_fpga_upgrade = 0;
83
84 struct pkt_hdr {
85 __le16 size;
86 __le16 vpi;
87 __le16 vci;
88 __le16 type;
89 };
90
91 struct solos_skb_cb {
92 struct atm_vcc *vcc;
93 uint32_t dma_addr;
94 };
95
96
97 #define SKB_CB(skb) ((struct solos_skb_cb *)skb->cb)
98
99 #define PKT_DATA 0
100 #define PKT_COMMAND 1
101 #define PKT_POPEN 3
102 #define PKT_PCLOSE 4
103 #define PKT_STATUS 5
104
105 struct solos_card {
106 void __iomem *config_regs;
107 void __iomem *buffers;
108 int nr_ports;
109 int tx_mask;
110 struct pci_dev *dev;
111 struct atm_dev *atmdev[4];
112 struct tasklet_struct tlet;
113 spinlock_t tx_lock;
114 spinlock_t tx_queue_lock;
115 spinlock_t cli_queue_lock;
116 spinlock_t param_queue_lock;
117 struct list_head param_queue;
118 struct sk_buff_head tx_queue[4];
119 struct sk_buff_head cli_queue[4];
120 struct sk_buff *tx_skb[4];
121 struct sk_buff *rx_skb[4];
122 unsigned char *dma_bounce;
123 wait_queue_head_t param_wq;
124 wait_queue_head_t fw_wq;
125 int using_dma;
126 int dma_alignment;
127 int fpga_version;
128 int buffer_size;
129 int atmel_flash;
130 };
131
132
133 struct solos_param {
134 struct list_head list;
135 pid_t pid;
136 int port;
137 struct sk_buff *response;
138 };
139
140 #define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
141
142 MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
143 MODULE_DESCRIPTION("Solos PCI driver");
144 MODULE_VERSION(VERSION);
145 MODULE_LICENSE("GPL");
146 MODULE_FIRMWARE("solos-FPGA.bin");
147 MODULE_FIRMWARE("solos-Firmware.bin");
148 MODULE_FIRMWARE("solos-db-FPGA.bin");
149 MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
150 MODULE_PARM_DESC(atmdebug, "Print ATM data");
151 MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
152 MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
153 MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
154 MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
155 module_param(reset, int, 0444);
156 module_param(atmdebug, int, 0644);
157 module_param(firmware_upgrade, int, 0444);
158 module_param(fpga_upgrade, int, 0444);
159 module_param(db_firmware_upgrade, int, 0444);
160 module_param(db_fpga_upgrade, int, 0444);
161
162 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
163 struct atm_vcc *vcc);
164 static uint32_t fpga_tx(struct solos_card *);
165 static irqreturn_t solos_irq(int irq, void *dev_id);
166 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
167 static int atm_init(struct solos_card *, struct device *);
168 static void atm_remove(struct solos_card *);
169 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
170 static void solos_bh(unsigned long);
171 static int print_buffer(struct sk_buff *buf);
172
173 static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
174 {
175 if (vcc->pop)
176 vcc->pop(vcc, skb);
177 else
178 dev_kfree_skb_any(skb);
179 }
180
181 static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
182 char *buf)
183 {
184 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
185 struct solos_card *card = atmdev->dev_data;
186 struct solos_param prm;
187 struct sk_buff *skb;
188 struct pkt_hdr *header;
189 int buflen;
190
191 buflen = strlen(attr->attr.name) + 10;
192
193 skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
194 if (!skb) {
195 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
196 return -ENOMEM;
197 }
198
199 header = skb_put(skb, sizeof(*header));
200
201 buflen = snprintf((void *)&header[1], buflen - 1,
202 "L%05d\n%s\n", current->pid, attr->attr.name);
203 skb_put(skb, buflen);
204
205 header->size = cpu_to_le16(buflen);
206 header->vpi = cpu_to_le16(0);
207 header->vci = cpu_to_le16(0);
208 header->type = cpu_to_le16(PKT_COMMAND);
209
210 prm.pid = current->pid;
211 prm.response = NULL;
212 prm.port = SOLOS_CHAN(atmdev);
213
214 spin_lock_irq(&card->param_queue_lock);
215 list_add(&prm.list, &card->param_queue);
216 spin_unlock_irq(&card->param_queue_lock);
217
218 fpga_queue(card, prm.port, skb, NULL);
219
220 wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
221
222 spin_lock_irq(&card->param_queue_lock);
223 list_del(&prm.list);
224 spin_unlock_irq(&card->param_queue_lock);
225
226 if (!prm.response)
227 return -EIO;
228
229 buflen = prm.response->len;
230 memcpy(buf, prm.response->data, buflen);
231 kfree_skb(prm.response);
232
233 return buflen;
234 }
235
236 static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
237 const char *buf, size_t count)
238 {
239 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
240 struct solos_card *card = atmdev->dev_data;
241 struct solos_param prm;
242 struct sk_buff *skb;
243 struct pkt_hdr *header;
244 int buflen;
245 ssize_t ret;
246
247 buflen = strlen(attr->attr.name) + 11 + count;
248
249 skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
250 if (!skb) {
251 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
252 return -ENOMEM;
253 }
254
255 header = skb_put(skb, sizeof(*header));
256
257 buflen = snprintf((void *)&header[1], buflen - 1,
258 "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
259
260 skb_put(skb, buflen);
261 header->size = cpu_to_le16(buflen);
262 header->vpi = cpu_to_le16(0);
263 header->vci = cpu_to_le16(0);
264 header->type = cpu_to_le16(PKT_COMMAND);
265
266 prm.pid = current->pid;
267 prm.response = NULL;
268 prm.port = SOLOS_CHAN(atmdev);
269
270 spin_lock_irq(&card->param_queue_lock);
271 list_add(&prm.list, &card->param_queue);
272 spin_unlock_irq(&card->param_queue_lock);
273
274 fpga_queue(card, prm.port, skb, NULL);
275
276 wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
277
278 spin_lock_irq(&card->param_queue_lock);
279 list_del(&prm.list);
280 spin_unlock_irq(&card->param_queue_lock);
281
282 skb = prm.response;
283
284 if (!skb)
285 return -EIO;
286
287 buflen = skb->len;
288
289 /* Sometimes it has a newline, sometimes it doesn't. */
290 if (skb->data[buflen - 1] == '\n')
291 buflen--;
292
293 if (buflen == 2 && !strncmp(skb->data, "OK", 2))
294 ret = count;
295 else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
296 ret = -EIO;
297 else {
298 /* We know we have enough space allocated for this; we allocated
299 it ourselves */
300 skb->data[buflen] = 0;
301
302 dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
303 skb->data);
304 ret = -EIO;
305 }
306 kfree_skb(skb);
307
308 return ret;
309 }
310
311 static char *next_string(struct sk_buff *skb)
312 {
313 int i = 0;
314 char *this = skb->data;
315
316 for (i = 0; i < skb->len; i++) {
317 if (this[i] == '\n') {
318 this[i] = 0;
319 skb_pull(skb, i + 1);
320 return this;
321 }
322 if (!isprint(this[i]))
323 return NULL;
324 }
325 return NULL;
326 }
327
328 /*
329 * Status packet has fields separated by \n, starting with a version number
330 * for the information therein. Fields are....
331 *
332 * packet version
333 * RxBitRate (version >= 1)
334 * TxBitRate (version >= 1)
335 * State (version >= 1)
336 * LocalSNRMargin (version >= 1)
337 * LocalLineAttn (version >= 1)
338 */
339 static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
340 {
341 char *str, *state_str, *snr, *attn;
342 int ver, rate_up, rate_down, err;
343
344 if (!card->atmdev[port])
345 return -ENODEV;
346
347 str = next_string(skb);
348 if (!str)
349 return -EIO;
350
351 err = kstrtoint(str, 10, &ver);
352 if (err) {
353 dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
354 return err;
355 }
356 if (ver < 1) {
357 dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
358 ver);
359 return -EIO;
360 }
361
362 str = next_string(skb);
363 if (!str)
364 return -EIO;
365 if (!strcmp(str, "ERROR")) {
366 dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
367 port);
368 return 0;
369 }
370
371 err = kstrtoint(str, 10, &rate_down);
372 if (err)
373 return err;
374
375 str = next_string(skb);
376 if (!str)
377 return -EIO;
378 err = kstrtoint(str, 10, &rate_up);
379 if (err)
380 return err;
381
382 state_str = next_string(skb);
383 if (!state_str)
384 return -EIO;
385
386 /* Anything but 'Showtime' is down */
387 if (strcmp(state_str, "Showtime")) {
388 atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
389 dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
390 return 0;
391 }
392
393 snr = next_string(skb);
394 if (!snr)
395 return -EIO;
396 attn = next_string(skb);
397 if (!attn)
398 return -EIO;
399
400 dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
401 port, state_str, rate_down/1000, rate_up/1000,
402 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
403
404 card->atmdev[port]->link_rate = rate_down / 424;
405 atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
406
407 return 0;
408 }
409
410 static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
411 {
412 struct solos_param *prm;
413 unsigned long flags;
414 int cmdpid;
415 int found = 0, err;
416
417 if (skb->len < 7)
418 return 0;
419
420 if (skb->data[0] != 'L' || !isdigit(skb->data[1]) ||
421 !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
422 !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
423 skb->data[6] != '\n')
424 return 0;
425
426 err = kstrtoint(&skb->data[1], 10, &cmdpid);
427 if (err)
428 return err;
429
430 spin_lock_irqsave(&card->param_queue_lock, flags);
431 list_for_each_entry(prm, &card->param_queue, list) {
432 if (prm->port == port && prm->pid == cmdpid) {
433 prm->response = skb;
434 skb_pull(skb, 7);
435 wake_up(&card->param_wq);
436 found = 1;
437 break;
438 }
439 }
440 spin_unlock_irqrestore(&card->param_queue_lock, flags);
441 return found;
442 }
443
444 static ssize_t console_show(struct device *dev, struct device_attribute *attr,
445 char *buf)
446 {
447 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
448 struct solos_card *card = atmdev->dev_data;
449 struct sk_buff *skb;
450 unsigned int len;
451
452 spin_lock(&card->cli_queue_lock);
453 skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
454 spin_unlock(&card->cli_queue_lock);
455 if(skb == NULL)
456 return sprintf(buf, "No data.\n");
457
458 len = skb->len;
459 memcpy(buf, skb->data, len);
460
461 kfree_skb(skb);
462 return len;
463 }
464
465 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
466 {
467 struct sk_buff *skb;
468 struct pkt_hdr *header;
469
470 if (size > (BUF_SIZE - sizeof(*header))) {
471 dev_dbg(&card->dev->dev, "Command is too big. Dropping request\n");
472 return 0;
473 }
474 skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
475 if (!skb) {
476 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
477 return 0;
478 }
479
480 header = skb_put(skb, sizeof(*header));
481
482 header->size = cpu_to_le16(size);
483 header->vpi = cpu_to_le16(0);
484 header->vci = cpu_to_le16(0);
485 header->type = cpu_to_le16(PKT_COMMAND);
486
487 skb_put_data(skb, buf, size);
488
489 fpga_queue(card, dev, skb, NULL);
490
491 return 0;
492 }
493
494 static ssize_t console_store(struct device *dev, struct device_attribute *attr,
495 const char *buf, size_t count)
496 {
497 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
498 struct solos_card *card = atmdev->dev_data;
499 int err;
500
501 err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
502
503 return err?:count;
504 }
505
506 struct geos_gpio_attr {
507 struct device_attribute attr;
508 int offset;
509 };
510
511 #define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \
512 struct geos_gpio_attr gpio_attr_##_name = { \
513 .attr = __ATTR(_name, _mode, _show, _store), \
514 .offset = _offset }
515
516 static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
517 const char *buf, size_t count)
518 {
519 struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
520 struct solos_card *card = dev_get_drvdata(dev);
521 uint32_t data32;
522
523 if (count != 1 && (count != 2 || buf[1] != '\n'))
524 return -EINVAL;
525
526 spin_lock_irq(&card->param_queue_lock);
527 data32 = ioread32(card->config_regs + GPIO_STATUS);
528 if (buf[0] == '1') {
529 data32 |= 1 << gattr->offset;
530 iowrite32(data32, card->config_regs + GPIO_STATUS);
531 } else if (buf[0] == '0') {
532 data32 &= ~(1 << gattr->offset);
533 iowrite32(data32, card->config_regs + GPIO_STATUS);
534 } else {
535 count = -EINVAL;
536 }
537 spin_unlock_irq(&card->param_queue_lock);
538 return count;
539 }
540
541 static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
542 char *buf)
543 {
544 struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
545 struct solos_card *card = dev_get_drvdata(dev);
546 uint32_t data32;
547
548 data32 = ioread32(card->config_regs + GPIO_STATUS);
549 data32 = (data32 >> gattr->offset) & 1;
550
551 return sprintf(buf, "%d\n", data32);
552 }
553
554 static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
555 char *buf)
556 {
557 struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
558 struct solos_card *card = dev_get_drvdata(dev);
559 uint32_t data32;
560
561 data32 = ioread32(card->config_regs + GPIO_STATUS);
562 switch (gattr->offset) {
563 case 0:
564 /* HardwareVersion */
565 data32 = data32 & 0x1F;
566 break;
567 case 1:
568 /* HardwareVariant */
569 data32 = (data32 >> 5) & 0x0F;
570 break;
571 }
572 return sprintf(buf, "%d\n", data32);
573 }
574
575 static DEVICE_ATTR_RW(console);
576
577
578 #define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
579 #define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
580
581 #include "solos-attrlist.c"
582
583 static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
584 static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
585 static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
586 static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
587 static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
588 static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
589 static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
590 static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
591 #undef SOLOS_ATTR_RO
592 #undef SOLOS_ATTR_RW
593
594 #define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
595 #define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
596
597 static struct attribute *solos_attrs[] = {
598 #include "solos-attrlist.c"
599 NULL
600 };
601
602 static const struct attribute_group solos_attr_group = {
603 .attrs = solos_attrs,
604 .name = "parameters",
605 };
606
607 static struct attribute *gpio_attrs[] = {
608 &gpio_attr_GPIO1.attr.attr,
609 &gpio_attr_GPIO2.attr.attr,
610 &gpio_attr_GPIO3.attr.attr,
611 &gpio_attr_GPIO4.attr.attr,
612 &gpio_attr_GPIO5.attr.attr,
613 &gpio_attr_PushButton.attr.attr,
614 &gpio_attr_HardwareVersion.attr.attr,
615 &gpio_attr_HardwareVariant.attr.attr,
616 NULL
617 };
618
619 static const struct attribute_group gpio_attr_group = {
620 .attrs = gpio_attrs,
621 .name = "gpio",
622 };
623
624 static int flash_upgrade(struct solos_card *card, int chip)
625 {
626 const struct firmware *fw;
627 const char *fw_name;
628 int blocksize = 0;
629 int numblocks = 0;
630 int offset;
631
632 switch (chip) {
633 case 0:
634 fw_name = "solos-FPGA.bin";
635 if (card->atmel_flash)
636 blocksize = ATMEL_FPGA_BLOCK;
637 else
638 blocksize = SPI_FLASH_BLOCK;
639 break;
640 case 1:
641 fw_name = "solos-Firmware.bin";
642 if (card->atmel_flash)
643 blocksize = ATMEL_SOLOS_BLOCK;
644 else
645 blocksize = SPI_FLASH_BLOCK;
646 break;
647 case 2:
648 if (card->fpga_version > LEGACY_BUFFERS){
649 fw_name = "solos-db-FPGA.bin";
650 if (card->atmel_flash)
651 blocksize = ATMEL_FPGA_BLOCK;
652 else
653 blocksize = SPI_FLASH_BLOCK;
654 } else {
655 dev_info(&card->dev->dev, "FPGA version doesn't support"
656 " daughter board upgrades\n");
657 return -EPERM;
658 }
659 break;
660 case 3:
661 if (card->fpga_version > LEGACY_BUFFERS){
662 fw_name = "solos-Firmware.bin";
663 if (card->atmel_flash)
664 blocksize = ATMEL_SOLOS_BLOCK;
665 else
666 blocksize = SPI_FLASH_BLOCK;
667 } else {
668 dev_info(&card->dev->dev, "FPGA version doesn't support"
669 " daughter board upgrades\n");
670 return -EPERM;
671 }
672 break;
673 default:
674 return -ENODEV;
675 }
676
677 if (request_firmware(&fw, fw_name, &card->dev->dev))
678 return -ENOENT;
679
680 dev_info(&card->dev->dev, "Flash upgrade starting\n");
681
682 /* New FPGAs require driver version before permitting flash upgrades */
683 iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
684
685 numblocks = fw->size / blocksize;
686 dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
687 dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
688
689 dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
690 iowrite32(1, card->config_regs + FPGA_MODE);
691 (void) ioread32(card->config_regs + FPGA_MODE);
692
693 /* Set mode to Chip Erase */
694 if(chip == 0 || chip == 2)
695 dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
696 if(chip == 1 || chip == 3)
697 dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
698 iowrite32((chip * 2), card->config_regs + FLASH_MODE);
699
700
701 iowrite32(1, card->config_regs + WRITE_FLASH);
702 wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
703
704 for (offset = 0; offset < fw->size; offset += blocksize) {
705 int i;
706
707 /* Clear write flag */
708 iowrite32(0, card->config_regs + WRITE_FLASH);
709
710 /* Set mode to Block Write */
711 /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
712 iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
713
714 /* Copy block to buffer, swapping each 16 bits for Atmel flash */
715 for(i = 0; i < blocksize; i += 4) {
716 uint32_t word;
717 if (card->atmel_flash)
718 word = swahb32p((uint32_t *)(fw->data + offset + i));
719 else
720 word = *(uint32_t *)(fw->data + offset + i);
721 if(card->fpga_version > LEGACY_BUFFERS)
722 iowrite32(word, FLASH_BUF + i);
723 else
724 iowrite32(word, RX_BUF(card, 3) + i);
725 }
726
727 /* Specify block number and then trigger flash write */
728 iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
729 iowrite32(1, card->config_regs + WRITE_FLASH);
730 wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
731 }
732
733 release_firmware(fw);
734 iowrite32(0, card->config_regs + WRITE_FLASH);
735 iowrite32(0, card->config_regs + FPGA_MODE);
736 iowrite32(0, card->config_regs + FLASH_MODE);
737 dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
738 return 0;
739 }
740
741 static irqreturn_t solos_irq(int irq, void *dev_id)
742 {
743 struct solos_card *card = dev_id;
744 int handled = 1;
745
746 iowrite32(0, card->config_regs + IRQ_CLEAR);
747
748 /* If we're up and running, just kick the tasklet to process TX/RX */
749 if (card->atmdev[0])
750 tasklet_schedule(&card->tlet);
751 else
752 wake_up(&card->fw_wq);
753
754 return IRQ_RETVAL(handled);
755 }
756
757 static void solos_bh(unsigned long card_arg)
758 {
759 struct solos_card *card = (void *)card_arg;
760 uint32_t card_flags;
761 uint32_t rx_done = 0;
762 int port;
763
764 /*
765 * Since fpga_tx() is going to need to read the flags under its lock,
766 * it can return them to us so that we don't have to hit PCI MMIO
767 * again for the same information
768 */
769 card_flags = fpga_tx(card);
770
771 for (port = 0; port < card->nr_ports; port++) {
772 if (card_flags & (0x10 << port)) {
773 struct pkt_hdr _hdr, *header;
774 struct sk_buff *skb;
775 struct atm_vcc *vcc;
776 int size;
777
778 if (card->using_dma) {
779 skb = card->rx_skb[port];
780 card->rx_skb[port] = NULL;
781
782 dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
783 RX_DMA_SIZE, DMA_FROM_DEVICE);
784
785 header = (void *)skb->data;
786 size = le16_to_cpu(header->size);
787 skb_put(skb, size + sizeof(*header));
788 skb_pull(skb, sizeof(*header));
789 } else {
790 header = &_hdr;
791
792 rx_done |= 0x10 << port;
793
794 memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
795
796 size = le16_to_cpu(header->size);
797 if (size > (card->buffer_size - sizeof(*header))){
798 dev_warn(&card->dev->dev, "Invalid buffer size\n");
799 continue;
800 }
801
802 /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
803 * headroom, and ensures we can route packets back out an
804 * Ethernet interface (for example) without having to
805 * reallocate. Adding NET_IP_ALIGN also ensures that both
806 * PPPoATM and PPPoEoBR2684 packets end up aligned. */
807 skb = netdev_alloc_skb_ip_align(NULL, size + 1);
808 if (!skb) {
809 if (net_ratelimit())
810 dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
811 continue;
812 }
813
814 memcpy_fromio(skb_put(skb, size),
815 RX_BUF(card, port) + sizeof(*header),
816 size);
817 }
818 if (atmdebug) {
819 dev_info(&card->dev->dev, "Received: port %d\n", port);
820 dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
821 size, le16_to_cpu(header->vpi),
822 le16_to_cpu(header->vci));
823 print_buffer(skb);
824 }
825
826 switch (le16_to_cpu(header->type)) {
827 case PKT_DATA:
828 vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
829 le16_to_cpu(header->vci));
830 if (!vcc) {
831 if (net_ratelimit())
832 dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
833 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
834 port);
835 dev_kfree_skb_any(skb);
836 break;
837 }
838 atm_charge(vcc, skb->truesize);
839 vcc->push(vcc, skb);
840 atomic_inc(&vcc->stats->rx);
841 break;
842
843 case PKT_STATUS:
844 if (process_status(card, port, skb) &&
845 net_ratelimit()) {
846 dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
847 print_buffer(skb);
848 }
849 dev_kfree_skb_any(skb);
850 break;
851
852 case PKT_COMMAND:
853 default: /* FIXME: Not really, surely? */
854 if (process_command(card, port, skb))
855 break;
856 spin_lock(&card->cli_queue_lock);
857 if (skb_queue_len(&card->cli_queue[port]) > 10) {
858 if (net_ratelimit())
859 dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
860 port);
861 dev_kfree_skb_any(skb);
862 } else
863 skb_queue_tail(&card->cli_queue[port], skb);
864 spin_unlock(&card->cli_queue_lock);
865 break;
866 }
867 }
868 /* Allocate RX skbs for any ports which need them */
869 if (card->using_dma && card->atmdev[port] &&
870 !card->rx_skb[port]) {
871 /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
872 * here; the FPGA can only DMA to addresses which are
873 * aligned to 4 bytes. */
874 struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
875 if (skb) {
876 SKB_CB(skb)->dma_addr =
877 dma_map_single(&card->dev->dev, skb->data,
878 RX_DMA_SIZE, DMA_FROM_DEVICE);
879 iowrite32(SKB_CB(skb)->dma_addr,
880 card->config_regs + RX_DMA_ADDR(port));
881 card->rx_skb[port] = skb;
882 } else {
883 if (net_ratelimit())
884 dev_warn(&card->dev->dev, "Failed to allocate RX skb");
885
886 /* We'll have to try again later */
887 tasklet_schedule(&card->tlet);
888 }
889 }
890 }
891 if (rx_done)
892 iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
893
894 return;
895 }
896
897 static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
898 {
899 struct hlist_head *head;
900 struct atm_vcc *vcc = NULL;
901 struct sock *s;
902
903 read_lock(&vcc_sklist_lock);
904 head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
905 sk_for_each(s, head) {
906 vcc = atm_sk(s);
907 if (vcc->dev == dev && vcc->vci == vci &&
908 vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
909 test_bit(ATM_VF_READY, &vcc->flags))
910 goto out;
911 }
912 vcc = NULL;
913 out:
914 read_unlock(&vcc_sklist_lock);
915 return vcc;
916 }
917
918 static int popen(struct atm_vcc *vcc)
919 {
920 struct solos_card *card = vcc->dev->dev_data;
921 struct sk_buff *skb;
922 struct pkt_hdr *header;
923
924 if (vcc->qos.aal != ATM_AAL5) {
925 dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
926 vcc->qos.aal);
927 return -EINVAL;
928 }
929
930 skb = alloc_skb(sizeof(*header), GFP_KERNEL);
931 if (!skb) {
932 if (net_ratelimit())
933 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
934 return -ENOMEM;
935 }
936 header = skb_put(skb, sizeof(*header));
937
938 header->size = cpu_to_le16(0);
939 header->vpi = cpu_to_le16(vcc->vpi);
940 header->vci = cpu_to_le16(vcc->vci);
941 header->type = cpu_to_le16(PKT_POPEN);
942
943 fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
944
945 set_bit(ATM_VF_ADDR, &vcc->flags);
946 set_bit(ATM_VF_READY, &vcc->flags);
947
948 return 0;
949 }
950
951 static void pclose(struct atm_vcc *vcc)
952 {
953 struct solos_card *card = vcc->dev->dev_data;
954 unsigned char port = SOLOS_CHAN(vcc->dev);
955 struct sk_buff *skb, *tmpskb;
956 struct pkt_hdr *header;
957
958 /* Remove any yet-to-be-transmitted packets from the pending queue */
959 spin_lock(&card->tx_queue_lock);
960 skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
961 if (SKB_CB(skb)->vcc == vcc) {
962 skb_unlink(skb, &card->tx_queue[port]);
963 solos_pop(vcc, skb);
964 }
965 }
966 spin_unlock(&card->tx_queue_lock);
967
968 skb = alloc_skb(sizeof(*header), GFP_KERNEL);
969 if (!skb) {
970 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
971 return;
972 }
973 header = skb_put(skb, sizeof(*header));
974
975 header->size = cpu_to_le16(0);
976 header->vpi = cpu_to_le16(vcc->vpi);
977 header->vci = cpu_to_le16(vcc->vci);
978 header->type = cpu_to_le16(PKT_PCLOSE);
979
980 skb_get(skb);
981 fpga_queue(card, port, skb, NULL);
982
983 if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
984 dev_warn(&card->dev->dev,
985 "Timeout waiting for VCC close on port %d\n", port);
986
987 dev_kfree_skb(skb);
988
989 /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
990 tasklet has finished processing any incoming packets (and, more to
991 the point, using the vcc pointer). */
992 tasklet_unlock_wait(&card->tlet);
993
994 clear_bit(ATM_VF_ADDR, &vcc->flags);
995
996 return;
997 }
998
999 static int print_buffer(struct sk_buff *buf)
1000 {
1001 int len,i;
1002 char msg[500];
1003 char item[10];
1004
1005 len = buf->len;
1006 for (i = 0; i < len; i++){
1007 if(i % 8 == 0)
1008 sprintf(msg, "%02X: ", i);
1009
1010 sprintf(item,"%02X ",*(buf->data + i));
1011 strcat(msg, item);
1012 if(i % 8 == 7) {
1013 sprintf(item, "\n");
1014 strcat(msg, item);
1015 printk(KERN_DEBUG "%s", msg);
1016 }
1017 }
1018 if (i % 8 != 0) {
1019 sprintf(item, "\n");
1020 strcat(msg, item);
1021 printk(KERN_DEBUG "%s", msg);
1022 }
1023 printk(KERN_DEBUG "\n");
1024
1025 return 0;
1026 }
1027
1028 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
1029 struct atm_vcc *vcc)
1030 {
1031 int old_len;
1032 unsigned long flags;
1033
1034 SKB_CB(skb)->vcc = vcc;
1035
1036 spin_lock_irqsave(&card->tx_queue_lock, flags);
1037 old_len = skb_queue_len(&card->tx_queue[port]);
1038 skb_queue_tail(&card->tx_queue[port], skb);
1039 if (!old_len)
1040 card->tx_mask |= (1 << port);
1041 spin_unlock_irqrestore(&card->tx_queue_lock, flags);
1042
1043 /* Theoretically we could just schedule the tasklet here, but
1044 that introduces latency we don't want -- it's noticeable */
1045 if (!old_len)
1046 fpga_tx(card);
1047 }
1048
1049 static uint32_t fpga_tx(struct solos_card *card)
1050 {
1051 uint32_t tx_pending, card_flags;
1052 uint32_t tx_started = 0;
1053 struct sk_buff *skb;
1054 struct atm_vcc *vcc;
1055 unsigned char port;
1056 unsigned long flags;
1057
1058 spin_lock_irqsave(&card->tx_lock, flags);
1059
1060 card_flags = ioread32(card->config_regs + FLAGS_ADDR);
1061 /*
1062 * The queue lock is required for _writing_ to tx_mask, but we're
1063 * OK to read it here without locking. The only potential update
1064 * that we could race with is in fpga_queue() where it sets a bit
1065 * for a new port... but it's going to call this function again if
1066 * it's doing that, anyway.
1067 */
1068 tx_pending = card->tx_mask & ~card_flags;
1069
1070 for (port = 0; tx_pending; tx_pending >>= 1, port++) {
1071 if (tx_pending & 1) {
1072 struct sk_buff *oldskb = card->tx_skb[port];
1073 if (oldskb) {
1074 dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
1075 oldskb->len, DMA_TO_DEVICE);
1076 card->tx_skb[port] = NULL;
1077 }
1078 spin_lock(&card->tx_queue_lock);
1079 skb = skb_dequeue(&card->tx_queue[port]);
1080 if (!skb)
1081 card->tx_mask &= ~(1 << port);
1082 spin_unlock(&card->tx_queue_lock);
1083
1084 if (skb && !card->using_dma) {
1085 memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
1086 tx_started |= 1 << port;
1087 oldskb = skb; /* We're done with this skb already */
1088 } else if (skb && card->using_dma) {
1089 unsigned char *data = skb->data;
1090 if ((unsigned long)data & card->dma_alignment) {
1091 data = card->dma_bounce + (BUF_SIZE * port);
1092 memcpy(data, skb->data, skb->len);
1093 }
1094 SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
1095 skb->len, DMA_TO_DEVICE);
1096 card->tx_skb[port] = skb;
1097 iowrite32(SKB_CB(skb)->dma_addr,
1098 card->config_regs + TX_DMA_ADDR(port));
1099 }
1100
1101 if (!oldskb)
1102 continue;
1103
1104 /* Clean up and free oldskb now it's gone */
1105 if (atmdebug) {
1106 struct pkt_hdr *header = (void *)oldskb->data;
1107 int size = le16_to_cpu(header->size);
1108
1109 skb_pull(oldskb, sizeof(*header));
1110 dev_info(&card->dev->dev, "Transmitted: port %d\n",
1111 port);
1112 dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
1113 size, le16_to_cpu(header->vpi),
1114 le16_to_cpu(header->vci));
1115 print_buffer(oldskb);
1116 }
1117
1118 vcc = SKB_CB(oldskb)->vcc;
1119
1120 if (vcc) {
1121 atomic_inc(&vcc->stats->tx);
1122 solos_pop(vcc, oldskb);
1123 } else {
1124 dev_kfree_skb_irq(oldskb);
1125 wake_up(&card->param_wq);
1126 }
1127 }
1128 }
1129 /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
1130 if (tx_started)
1131 iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
1132
1133 spin_unlock_irqrestore(&card->tx_lock, flags);
1134 return card_flags;
1135 }
1136
1137 static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
1138 {
1139 struct solos_card *card = vcc->dev->dev_data;
1140 struct pkt_hdr *header;
1141 int pktlen;
1142
1143 pktlen = skb->len;
1144 if (pktlen > (BUF_SIZE - sizeof(*header))) {
1145 dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
1146 solos_pop(vcc, skb);
1147 return 0;
1148 }
1149
1150 if (!skb_clone_writable(skb, sizeof(*header))) {
1151 int expand_by = 0;
1152 int ret;
1153
1154 if (skb_headroom(skb) < sizeof(*header))
1155 expand_by = sizeof(*header) - skb_headroom(skb);
1156
1157 ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
1158 if (ret) {
1159 dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
1160 solos_pop(vcc, skb);
1161 return ret;
1162 }
1163 }
1164
1165 header = skb_push(skb, sizeof(*header));
1166
1167 /* This does _not_ include the size of the header */
1168 header->size = cpu_to_le16(pktlen);
1169 header->vpi = cpu_to_le16(vcc->vpi);
1170 header->vci = cpu_to_le16(vcc->vci);
1171 header->type = cpu_to_le16(PKT_DATA);
1172
1173 fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
1174
1175 return 0;
1176 }
1177
1178 static const struct atmdev_ops fpga_ops = {
1179 .open = popen,
1180 .close = pclose,
1181 .ioctl = NULL,
1182 .getsockopt = NULL,
1183 .setsockopt = NULL,
1184 .send = psend,
1185 .send_oam = NULL,
1186 .phy_put = NULL,
1187 .phy_get = NULL,
1188 .change_qos = NULL,
1189 .proc_read = NULL,
1190 .owner = THIS_MODULE
1191 };
1192
1193 static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
1194 {
1195 int err;
1196 uint16_t fpga_ver;
1197 uint8_t major_ver, minor_ver;
1198 uint32_t data32;
1199 struct solos_card *card;
1200
1201 card = kzalloc(sizeof(*card), GFP_KERNEL);
1202 if (!card)
1203 return -ENOMEM;
1204
1205 card->dev = dev;
1206 init_waitqueue_head(&card->fw_wq);
1207 init_waitqueue_head(&card->param_wq);
1208
1209 err = pci_enable_device(dev);
1210 if (err) {
1211 dev_warn(&dev->dev, "Failed to enable PCI device\n");
1212 goto out;
1213 }
1214
1215 err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
1216 if (err) {
1217 dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
1218 goto out;
1219 }
1220
1221 err = pci_request_regions(dev, "solos");
1222 if (err) {
1223 dev_warn(&dev->dev, "Failed to request regions\n");
1224 goto out;
1225 }
1226
1227 card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
1228 if (!card->config_regs) {
1229 dev_warn(&dev->dev, "Failed to ioremap config registers\n");
1230 err = -ENOMEM;
1231 goto out_release_regions;
1232 }
1233 card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
1234 if (!card->buffers) {
1235 dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
1236 err = -ENOMEM;
1237 goto out_unmap_config;
1238 }
1239
1240 if (reset) {
1241 iowrite32(1, card->config_regs + FPGA_MODE);
1242 ioread32(card->config_regs + FPGA_MODE);
1243
1244 iowrite32(0, card->config_regs + FPGA_MODE);
1245 ioread32(card->config_regs + FPGA_MODE);
1246 }
1247
1248 data32 = ioread32(card->config_regs + FPGA_VER);
1249 fpga_ver = (data32 & 0x0000FFFF);
1250 major_ver = ((data32 & 0xFF000000) >> 24);
1251 minor_ver = ((data32 & 0x00FF0000) >> 16);
1252 card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
1253 if (card->fpga_version > LEGACY_BUFFERS)
1254 card->buffer_size = BUF_SIZE;
1255 else
1256 card->buffer_size = OLD_BUF_SIZE;
1257 dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
1258 major_ver, minor_ver, fpga_ver);
1259
1260 if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
1261 db_fpga_upgrade || db_firmware_upgrade)) {
1262 dev_warn(&dev->dev,
1263 "FPGA too old; cannot upgrade flash. Use JTAG.\n");
1264 fpga_upgrade = firmware_upgrade = 0;
1265 db_fpga_upgrade = db_firmware_upgrade = 0;
1266 }
1267
1268 /* Stopped using Atmel flash after 0.03-38 */
1269 if (fpga_ver < 39)
1270 card->atmel_flash = 1;
1271 else
1272 card->atmel_flash = 0;
1273
1274 data32 = ioread32(card->config_regs + PORTS);
1275 card->nr_ports = (data32 & 0x000000FF);
1276
1277 if (card->fpga_version >= DMA_SUPPORTED) {
1278 pci_set_master(dev);
1279 card->using_dma = 1;
1280 if (1) { /* All known FPGA versions so far */
1281 card->dma_alignment = 3;
1282 card->dma_bounce = kmalloc_array(card->nr_ports,
1283 BUF_SIZE, GFP_KERNEL);
1284 if (!card->dma_bounce) {
1285 dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
1286 err = -ENOMEM;
1287 /* Fallback to MMIO doesn't work */
1288 goto out_unmap_both;
1289 }
1290 }
1291 } else {
1292 card->using_dma = 0;
1293 /* Set RX empty flag for all ports */
1294 iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
1295 }
1296
1297 pci_set_drvdata(dev, card);
1298
1299 tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
1300 spin_lock_init(&card->tx_lock);
1301 spin_lock_init(&card->tx_queue_lock);
1302 spin_lock_init(&card->cli_queue_lock);
1303 spin_lock_init(&card->param_queue_lock);
1304 INIT_LIST_HEAD(&card->param_queue);
1305
1306 err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
1307 "solos-pci", card);
1308 if (err) {
1309 dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
1310 goto out_unmap_both;
1311 }
1312
1313 iowrite32(1, card->config_regs + IRQ_EN_ADDR);
1314
1315 if (fpga_upgrade)
1316 flash_upgrade(card, 0);
1317
1318 if (firmware_upgrade)
1319 flash_upgrade(card, 1);
1320
1321 if (db_fpga_upgrade)
1322 flash_upgrade(card, 2);
1323
1324 if (db_firmware_upgrade)
1325 flash_upgrade(card, 3);
1326
1327 err = atm_init(card, &dev->dev);
1328 if (err)
1329 goto out_free_irq;
1330
1331 if (card->fpga_version >= DMA_SUPPORTED &&
1332 sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
1333 dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
1334
1335 return 0;
1336
1337 out_free_irq:
1338 iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1339 free_irq(dev->irq, card);
1340 tasklet_kill(&card->tlet);
1341
1342 out_unmap_both:
1343 kfree(card->dma_bounce);
1344 pci_iounmap(dev, card->buffers);
1345 out_unmap_config:
1346 pci_iounmap(dev, card->config_regs);
1347 out_release_regions:
1348 pci_release_regions(dev);
1349 out:
1350 kfree(card);
1351 return err;
1352 }
1353
1354 static int atm_init(struct solos_card *card, struct device *parent)
1355 {
1356 int i;
1357
1358 for (i = 0; i < card->nr_ports; i++) {
1359 struct sk_buff *skb;
1360 struct pkt_hdr *header;
1361
1362 skb_queue_head_init(&card->tx_queue[i]);
1363 skb_queue_head_init(&card->cli_queue[i]);
1364
1365 card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
1366 if (!card->atmdev[i]) {
1367 dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
1368 atm_remove(card);
1369 return -ENODEV;
1370 }
1371 if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
1372 dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
1373 if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
1374 dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
1375
1376 dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
1377
1378 card->atmdev[i]->ci_range.vpi_bits = 8;
1379 card->atmdev[i]->ci_range.vci_bits = 16;
1380 card->atmdev[i]->dev_data = card;
1381 card->atmdev[i]->phy_data = (void *)(unsigned long)i;
1382 atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
1383
1384 skb = alloc_skb(sizeof(*header), GFP_KERNEL);
1385 if (!skb) {
1386 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
1387 continue;
1388 }
1389
1390 header = skb_put(skb, sizeof(*header));
1391
1392 header->size = cpu_to_le16(0);
1393 header->vpi = cpu_to_le16(0);
1394 header->vci = cpu_to_le16(0);
1395 header->type = cpu_to_le16(PKT_STATUS);
1396
1397 fpga_queue(card, i, skb, NULL);
1398 }
1399 return 0;
1400 }
1401
1402 static void atm_remove(struct solos_card *card)
1403 {
1404 int i;
1405
1406 for (i = 0; i < card->nr_ports; i++) {
1407 if (card->atmdev[i]) {
1408 struct sk_buff *skb;
1409
1410 dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
1411
1412 sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
1413 atm_dev_deregister(card->atmdev[i]);
1414
1415 skb = card->rx_skb[i];
1416 if (skb) {
1417 dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1418 RX_DMA_SIZE, DMA_FROM_DEVICE);
1419 dev_kfree_skb(skb);
1420 }
1421 skb = card->tx_skb[i];
1422 if (skb) {
1423 dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1424 skb->len, DMA_TO_DEVICE);
1425 dev_kfree_skb(skb);
1426 }
1427 while ((skb = skb_dequeue(&card->tx_queue[i])))
1428 dev_kfree_skb(skb);
1429
1430 }
1431 }
1432 }
1433
1434 static void fpga_remove(struct pci_dev *dev)
1435 {
1436 struct solos_card *card = pci_get_drvdata(dev);
1437
1438 /* Disable IRQs */
1439 iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1440
1441 /* Reset FPGA */
1442 iowrite32(1, card->config_regs + FPGA_MODE);
1443 (void)ioread32(card->config_regs + FPGA_MODE);
1444
1445 if (card->fpga_version >= DMA_SUPPORTED)
1446 sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
1447
1448 atm_remove(card);
1449
1450 free_irq(dev->irq, card);
1451 tasklet_kill(&card->tlet);
1452
1453 kfree(card->dma_bounce);
1454
1455 /* Release device from reset */
1456 iowrite32(0, card->config_regs + FPGA_MODE);
1457 (void)ioread32(card->config_regs + FPGA_MODE);
1458
1459 pci_iounmap(dev, card->buffers);
1460 pci_iounmap(dev, card->config_regs);
1461
1462 pci_release_regions(dev);
1463 pci_disable_device(dev);
1464
1465 kfree(card);
1466 }
1467
1468 static const struct pci_device_id fpga_pci_tbl[] = {
1469 { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1470 { 0, }
1471 };
1472
1473 MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
1474
1475 static struct pci_driver fpga_driver = {
1476 .name = "solos",
1477 .id_table = fpga_pci_tbl,
1478 .probe = fpga_probe,
1479 .remove = fpga_remove,
1480 };
1481
1482
1483 static int __init solos_pci_init(void)
1484 {
1485 BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
1486
1487 printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
1488 return pci_register_driver(&fpga_driver);
1489 }
1490
1491 static void __exit solos_pci_exit(void)
1492 {
1493 pci_unregister_driver(&fpga_driver);
1494 printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
1495 }
1496
1497 module_init(solos_pci_init);
1498 module_exit(solos_pci_exit);
Linux with added FPC-III support