gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / clocksource / timer-sp804.c
blob5cd0abf9b3965fe4049bc0c394d2320c2971f474
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * linux/drivers/clocksource/timer-sp.c
5 * Copyright (C) 1999 - 2003 ARM Limited
6 * Copyright (C) 2000 Deep Blue Solutions Ltd
7 */
8 #include <linux/clk.h>
9 #include <linux/clocksource.h>
10 #include <linux/clockchips.h>
11 #include <linux/err.h>
12 #include <linux/interrupt.h>
13 #include <linux/irq.h>
14 #include <linux/io.h>
15 #include <linux/of.h>
16 #include <linux/of_address.h>
17 #include <linux/of_clk.h>
18 #include <linux/of_irq.h>
19 #include <linux/sched_clock.h>
21 #include <clocksource/timer-sp804.h>
23 #include "timer-sp.h"
25 static long __init sp804_get_clock_rate(struct clk *clk)
27 long rate;
28 int err;
30 err = clk_prepare(clk);
31 if (err) {
32 pr_err("sp804: clock failed to prepare: %d\n", err);
33 clk_put(clk);
34 return err;
37 err = clk_enable(clk);
38 if (err) {
39 pr_err("sp804: clock failed to enable: %d\n", err);
40 clk_unprepare(clk);
41 clk_put(clk);
42 return err;
45 rate = clk_get_rate(clk);
46 if (rate < 0) {
47 pr_err("sp804: clock failed to get rate: %ld\n", rate);
48 clk_disable(clk);
49 clk_unprepare(clk);
50 clk_put(clk);
53 return rate;
56 static void __iomem *sched_clock_base;
58 static u64 notrace sp804_read(void)
60 return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
63 void __init sp804_timer_disable(void __iomem *base)
65 writel(0, base + TIMER_CTRL);
68 int __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
69 const char *name,
70 struct clk *clk,
71 int use_sched_clock)
73 long rate;
75 if (!clk) {
76 clk = clk_get_sys("sp804", name);
77 if (IS_ERR(clk)) {
78 pr_err("sp804: clock not found: %d\n",
79 (int)PTR_ERR(clk));
80 return PTR_ERR(clk);
84 rate = sp804_get_clock_rate(clk);
85 if (rate < 0)
86 return -EINVAL;
88 /* setup timer 0 as free-running clocksource */
89 writel(0, base + TIMER_CTRL);
90 writel(0xffffffff, base + TIMER_LOAD);
91 writel(0xffffffff, base + TIMER_VALUE);
92 writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
93 base + TIMER_CTRL);
95 clocksource_mmio_init(base + TIMER_VALUE, name,
96 rate, 200, 32, clocksource_mmio_readl_down);
98 if (use_sched_clock) {
99 sched_clock_base = base;
100 sched_clock_register(sp804_read, 32, rate);
103 return 0;
107 static void __iomem *clkevt_base;
108 static unsigned long clkevt_reload;
111 * IRQ handler for the timer
113 static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
115 struct clock_event_device *evt = dev_id;
117 /* clear the interrupt */
118 writel(1, clkevt_base + TIMER_INTCLR);
120 evt->event_handler(evt);
122 return IRQ_HANDLED;
125 static inline void timer_shutdown(struct clock_event_device *evt)
127 writel(0, clkevt_base + TIMER_CTRL);
130 static int sp804_shutdown(struct clock_event_device *evt)
132 timer_shutdown(evt);
133 return 0;
136 static int sp804_set_periodic(struct clock_event_device *evt)
138 unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
139 TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
141 timer_shutdown(evt);
142 writel(clkevt_reload, clkevt_base + TIMER_LOAD);
143 writel(ctrl, clkevt_base + TIMER_CTRL);
144 return 0;
147 static int sp804_set_next_event(unsigned long next,
148 struct clock_event_device *evt)
150 unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
151 TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE;
153 writel(next, clkevt_base + TIMER_LOAD);
154 writel(ctrl, clkevt_base + TIMER_CTRL);
156 return 0;
159 static struct clock_event_device sp804_clockevent = {
160 .features = CLOCK_EVT_FEAT_PERIODIC |
161 CLOCK_EVT_FEAT_ONESHOT |
162 CLOCK_EVT_FEAT_DYNIRQ,
163 .set_state_shutdown = sp804_shutdown,
164 .set_state_periodic = sp804_set_periodic,
165 .set_state_oneshot = sp804_shutdown,
166 .tick_resume = sp804_shutdown,
167 .set_next_event = sp804_set_next_event,
168 .rating = 300,
171 int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
173 struct clock_event_device *evt = &sp804_clockevent;
174 long rate;
176 if (!clk)
177 clk = clk_get_sys("sp804", name);
178 if (IS_ERR(clk)) {
179 pr_err("sp804: %s clock not found: %d\n", name,
180 (int)PTR_ERR(clk));
181 return PTR_ERR(clk);
184 rate = sp804_get_clock_rate(clk);
185 if (rate < 0)
186 return -EINVAL;
188 clkevt_base = base;
189 clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
190 evt->name = name;
191 evt->irq = irq;
192 evt->cpumask = cpu_possible_mask;
194 writel(0, base + TIMER_CTRL);
196 if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
197 "timer", &sp804_clockevent))
198 pr_err("%s: request_irq() failed\n", "timer");
199 clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
201 return 0;
204 static int __init sp804_of_init(struct device_node *np)
206 static bool initialized = false;
207 void __iomem *base;
208 int irq, ret = -EINVAL;
209 u32 irq_num = 0;
210 struct clk *clk1, *clk2;
211 const char *name = of_get_property(np, "compatible", NULL);
213 base = of_iomap(np, 0);
214 if (!base)
215 return -ENXIO;
217 /* Ensure timers are disabled */
218 writel(0, base + TIMER_CTRL);
219 writel(0, base + TIMER_2_BASE + TIMER_CTRL);
221 if (initialized || !of_device_is_available(np)) {
222 ret = -EINVAL;
223 goto err;
226 clk1 = of_clk_get(np, 0);
227 if (IS_ERR(clk1))
228 clk1 = NULL;
230 /* Get the 2nd clock if the timer has 3 timer clocks */
231 if (of_clk_get_parent_count(np) == 3) {
232 clk2 = of_clk_get(np, 1);
233 if (IS_ERR(clk2)) {
234 pr_err("sp804: %pOFn clock not found: %d\n", np,
235 (int)PTR_ERR(clk2));
236 clk2 = NULL;
238 } else
239 clk2 = clk1;
241 irq = irq_of_parse_and_map(np, 0);
242 if (irq <= 0)
243 goto err;
245 of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
246 if (irq_num == 2) {
248 ret = __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
249 if (ret)
250 goto err;
252 ret = __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
253 if (ret)
254 goto err;
255 } else {
257 ret = __sp804_clockevents_init(base, irq, clk1 , name);
258 if (ret)
259 goto err;
261 ret =__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
262 name, clk2, 1);
263 if (ret)
264 goto err;
266 initialized = true;
268 return 0;
269 err:
270 iounmap(base);
271 return ret;
273 TIMER_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
275 static int __init integrator_cp_of_init(struct device_node *np)
277 static int init_count = 0;
278 void __iomem *base;
279 int irq, ret = -EINVAL;
280 const char *name = of_get_property(np, "compatible", NULL);
281 struct clk *clk;
283 base = of_iomap(np, 0);
284 if (!base) {
285 pr_err("Failed to iomap\n");
286 return -ENXIO;
289 clk = of_clk_get(np, 0);
290 if (IS_ERR(clk)) {
291 pr_err("Failed to get clock\n");
292 return PTR_ERR(clk);
295 /* Ensure timer is disabled */
296 writel(0, base + TIMER_CTRL);
298 if (init_count == 2 || !of_device_is_available(np))
299 goto err;
301 if (!init_count) {
302 ret = __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
303 if (ret)
304 goto err;
305 } else {
306 irq = irq_of_parse_and_map(np, 0);
307 if (irq <= 0)
308 goto err;
310 ret = __sp804_clockevents_init(base, irq, clk, name);
311 if (ret)
312 goto err;
315 init_count++;
316 return 0;
317 err:
318 iounmap(base);
319 return ret;
321 TIMER_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);