gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / i2c / algos / i2c-algo-pcf.h
blob2448ab192ce54fab0c7f9d633ac223191ba25c40
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /* -------------------------------------------------------------------- */
3 /* i2c-pcf8584.h: PCF 8584 global defines */
4 /* -------------------------------------------------------------------- */
5 /* Copyright (C) 1996 Simon G. Vogl
6 1999 Hans Berglund
8 */
9 /* -------------------------------------------------------------------- */
11 /* With some changes from Frodo Looijaard <frodol@dds.nl> */
13 #ifndef I2C_PCF8584_H
14 #define I2C_PCF8584_H 1
16 /* ----- Control register bits ---------------------------------------- */
17 #define I2C_PCF_PIN 0x80
18 #define I2C_PCF_ESO 0x40
19 #define I2C_PCF_ES1 0x20
20 #define I2C_PCF_ES2 0x10
21 #define I2C_PCF_ENI 0x08
22 #define I2C_PCF_STA 0x04
23 #define I2C_PCF_STO 0x02
24 #define I2C_PCF_ACK 0x01
26 #define I2C_PCF_START (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
27 #define I2C_PCF_STOP (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK)
28 #define I2C_PCF_REPSTART ( I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
29 #define I2C_PCF_IDLE (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ACK)
31 /* ----- Status register bits ----------------------------------------- */
32 /*#define I2C_PCF_PIN 0x80 as above*/
34 #define I2C_PCF_INI 0x40 /* 1 if not initialized */
35 #define I2C_PCF_STS 0x20
36 #define I2C_PCF_BER 0x10
37 #define I2C_PCF_AD0 0x08
38 #define I2C_PCF_LRB 0x08
39 #define I2C_PCF_AAS 0x04
40 #define I2C_PCF_LAB 0x02
41 #define I2C_PCF_BB 0x01
43 /* ----- Chip clock frequencies --------------------------------------- */
44 #define I2C_PCF_CLK3 0x00
45 #define I2C_PCF_CLK443 0x10
46 #define I2C_PCF_CLK6 0x14
47 #define I2C_PCF_CLK 0x18
48 #define I2C_PCF_CLK12 0x1c
50 /* ----- transmission frequencies ------------------------------------- */
51 #define I2C_PCF_TRNS90 0x00 /* 90 kHz */
52 #define I2C_PCF_TRNS45 0x01 /* 45 kHz */
53 #define I2C_PCF_TRNS11 0x02 /* 11 kHz */
54 #define I2C_PCF_TRNS15 0x03 /* 1.5 kHz */
57 /* ----- Access to internal registers according to ES1,ES2 ------------ */
58 /* they are mapped to the data port ( a0 = 0 ) */
59 /* available when ESO == 0 : */
61 #define I2C_PCF_OWNADR 0
62 #define I2C_PCF_INTREG I2C_PCF_ES2
63 #define I2C_PCF_CLKREG I2C_PCF_ES1
65 #endif /* I2C_PCF8584_H */