gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / media / radio / radio-aimslab.c
blob0e9a3787724c8a1b43d3a0f8eb8fef879e9d3768
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * AimsLab RadioTrack (aka RadioVeveal) driver
5 * Copyright 1997 M. Kirkwood
7 * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
8 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
9 * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
10 * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
12 * Notes on the hardware (reverse engineered from other peoples'
13 * reverse engineering of AIMS' code :-)
15 * Frequency control is done digitally -- ie out(port,encodefreq(95.8));
17 * The signal strength query is unsurprisingly inaccurate. And it seems
18 * to indicate that (on my card, at least) the frequency setting isn't
19 * too great. (I have to tune up .025MHz from what the freq should be
20 * to get a report that the thing is tuned.)
22 * Volume control is (ugh) analogue:
23 * out(port, start_increasing_volume);
24 * wait(a_wee_while);
25 * out(port, stop_changing_the_volume);
27 * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
30 #include <linux/module.h> /* Modules */
31 #include <linux/init.h> /* Initdata */
32 #include <linux/ioport.h> /* request_region */
33 #include <linux/delay.h> /* msleep */
34 #include <linux/videodev2.h> /* kernel radio structs */
35 #include <linux/io.h> /* outb, outb_p */
36 #include <linux/slab.h>
37 #include <media/v4l2-device.h>
38 #include <media/v4l2-ioctl.h>
39 #include <media/v4l2-ctrls.h>
40 #include "radio-isa.h"
41 #include "lm7000.h"
43 MODULE_AUTHOR("M. Kirkwood");
44 MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card.");
45 MODULE_LICENSE("GPL");
46 MODULE_VERSION("1.0.0");
48 #ifndef CONFIG_RADIO_RTRACK_PORT
49 #define CONFIG_RADIO_RTRACK_PORT -1
50 #endif
52 #define RTRACK_MAX 2
54 static int io[RTRACK_MAX] = { [0] = CONFIG_RADIO_RTRACK_PORT,
55 [1 ... (RTRACK_MAX - 1)] = -1 };
56 static int radio_nr[RTRACK_MAX] = { [0 ... (RTRACK_MAX - 1)] = -1 };
58 module_param_array(io, int, NULL, 0444);
59 MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)");
60 module_param_array(radio_nr, int, NULL, 0444);
61 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
63 struct rtrack {
64 struct radio_isa_card isa;
65 int curvol;
68 static struct radio_isa_card *rtrack_alloc(void)
70 struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL);
72 if (rt)
73 rt->curvol = 0xff;
74 return rt ? &rt->isa : NULL;
77 #define AIMS_BIT_TUN_CE (1 << 0)
78 #define AIMS_BIT_TUN_CLK (1 << 1)
79 #define AIMS_BIT_TUN_DATA (1 << 2)
80 #define AIMS_BIT_VOL_CE (1 << 3)
81 #define AIMS_BIT_TUN_STRQ (1 << 4)
82 /* bit 5 is not connected */
83 #define AIMS_BIT_VOL_UP (1 << 6) /* active low */
84 #define AIMS_BIT_VOL_DN (1 << 7) /* active low */
86 static void rtrack_set_pins(void *handle, u8 pins)
88 struct radio_isa_card *isa = handle;
89 struct rtrack *rt = container_of(isa, struct rtrack, isa);
90 u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ;
92 if (!v4l2_ctrl_g_ctrl(rt->isa.mute))
93 bits |= AIMS_BIT_VOL_CE;
95 if (pins & LM7000_DATA)
96 bits |= AIMS_BIT_TUN_DATA;
97 if (pins & LM7000_CLK)
98 bits |= AIMS_BIT_TUN_CLK;
99 if (pins & LM7000_CE)
100 bits |= AIMS_BIT_TUN_CE;
102 outb_p(bits, rt->isa.io);
105 static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq)
107 lm7000_set_freq(freq, isa, rtrack_set_pins);
109 return 0;
112 static u32 rtrack_g_signal(struct radio_isa_card *isa)
114 /* bit set = no signal present */
115 return 0xffff * !(inb(isa->io) & 2);
118 static int rtrack_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
120 struct rtrack *rt = container_of(isa, struct rtrack, isa);
121 int curvol = rt->curvol;
123 if (mute) {
124 outb(0xd0, isa->io); /* volume steady + sigstr + off */
125 return 0;
127 if (vol == 0) { /* volume = 0 means mute the card */
128 outb(0x48, isa->io); /* volume down but still "on" */
129 msleep(curvol * 3); /* make sure it's totally down */
130 } else if (curvol < vol) {
131 outb(0x98, isa->io); /* volume up + sigstr + on */
132 for (; curvol < vol; curvol++)
133 mdelay(3);
134 } else if (curvol > vol) {
135 outb(0x58, isa->io); /* volume down + sigstr + on */
136 for (; curvol > vol; curvol--)
137 mdelay(3);
139 outb(0xd8, isa->io); /* volume steady + sigstr + on */
140 rt->curvol = vol;
141 return 0;
144 /* Mute card - prevents noisy bootups */
145 static int rtrack_initialize(struct radio_isa_card *isa)
147 /* this ensures that the volume is all the way up */
148 outb(0x90, isa->io); /* volume up but still "on" */
149 msleep(3000); /* make sure it's totally up */
150 outb(0xc0, isa->io); /* steady volume, mute card */
151 return 0;
154 static const struct radio_isa_ops rtrack_ops = {
155 .alloc = rtrack_alloc,
156 .init = rtrack_initialize,
157 .s_mute_volume = rtrack_s_mute_volume,
158 .s_frequency = rtrack_s_frequency,
159 .g_signal = rtrack_g_signal,
162 static const int rtrack_ioports[] = { 0x20f, 0x30f };
164 static struct radio_isa_driver rtrack_driver = {
165 .driver = {
166 .match = radio_isa_match,
167 .probe = radio_isa_probe,
168 .remove = radio_isa_remove,
169 .driver = {
170 .name = "radio-aimslab",
173 .io_params = io,
174 .radio_nr_params = radio_nr,
175 .io_ports = rtrack_ioports,
176 .num_of_io_ports = ARRAY_SIZE(rtrack_ioports),
177 .region_size = 2,
178 .card = "AIMSlab RadioTrack/RadioReveal",
179 .ops = &rtrack_ops,
180 .has_stereo = true,
181 .max_volume = 0xff,
184 static int __init rtrack_init(void)
186 return isa_register_driver(&rtrack_driver.driver, RTRACK_MAX);
189 static void __exit rtrack_exit(void)
191 isa_unregister_driver(&rtrack_driver.driver);
194 module_init(rtrack_init);
195 module_exit(rtrack_exit);