?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / media / usb / dvb-usb / dib0700_devices.c
blob4ef3fa98d20f4d985e8fd1dd4857640508832aa3
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
3 *
4 * Copyright (C) 2005-9 DiBcom, SA et al
5 */
6 #include "dib0700.h"
7
8 #include "dib3000mc.h"
9 #include "dib7000m.h"
10 #include "dib7000p.h"
11 #include "dib8000.h"
12 #include "dib9000.h"
13 #include "mt2060.h"
14 #include "mt2266.h"
15 #include "tuner-xc2028.h"
16 #include "xc5000.h"
17 #include "xc4000.h"
18 #include "s5h1411.h"
19 #include "dib0070.h"
20 #include "dib0090.h"
21 #include "lgdt3305.h"
22 #include "mxl5007t.h"
23 #include "mn88472.h"
24 #include "tda18250.h"
25
26
27 static int force_lna_activation;
28 module_param(force_lna_activation, int, 0644);
29 MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifier(s) (LNA), if applicable for the device (default: 0=automatic/off).");
30
31 struct dib0700_adapter_state {
32 int (*set_param_save) (struct dvb_frontend *);
33 const struct firmware *frontend_firmware;
34 struct dib7000p_ops dib7000p_ops;
35 struct dib8000_ops dib8000_ops;
36 };
37
38 /* Hauppauge Nova-T 500 (aka Bristol)
39 * has a LNA on GPIO0 which is enabled by setting 1 */
40 static struct mt2060_config bristol_mt2060_config[2] = {
41 {
42 .i2c_address = 0x60,
43 .clock_out = 3,
44 }, {
45 .i2c_address = 0x61,
46 }
47 };
48
49
50 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
51 .band_caps = BAND_VHF | BAND_UHF,
52 .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
53
54 .agc1_max = 42598,
55 .agc1_min = 17694,
56 .agc2_max = 45875,
57 .agc2_min = 0,
58
59 .agc1_pt1 = 0,
60 .agc1_pt2 = 59,
61
62 .agc1_slope1 = 0,
63 .agc1_slope2 = 69,
64
65 .agc2_pt1 = 0,
66 .agc2_pt2 = 59,
67
68 .agc2_slope1 = 111,
69 .agc2_slope2 = 28,
70 };
71
72 static struct dib3000mc_config bristol_dib3000mc_config[2] = {
73 { .agc = &bristol_dib3000p_mt2060_agc_config,
74 .max_time = 0x196,
75 .ln_adc_level = 0x1cc7,
76 .output_mpeg2_in_188_bytes = 1,
77 },
78 { .agc = &bristol_dib3000p_mt2060_agc_config,
79 .max_time = 0x196,
80 .ln_adc_level = 0x1cc7,
81 .output_mpeg2_in_188_bytes = 1,
82 }
83 };
84
85 static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
86 {
87 struct dib0700_state *st = adap->dev->priv;
88 if (adap->id == 0) {
89 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
90 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
91 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
92 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
93
94 if (force_lna_activation)
95 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
96 else
97 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
98
99 if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
100 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
101 return -ENODEV;
102 }
103 }
104 st->mt2060_if1[adap->id] = 1220;
105 return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
106 (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
107 }
108
109 static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
110 {
111 struct i2c_msg msg[2] = {
112 { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
113 { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
114 };
115 if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
116 return 0;
117 }
118
119 static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
120 {
121 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
122 struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
123 s8 a;
124 int if1=1220;
125 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
126 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
127 if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
128 }
129 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
130 &bristol_mt2060_config[adap->id], if1) == NULL ?
131 -ENODEV : 0;
132 }
133
134 /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
135
136 /* MT226x */
137 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
138 {
139 BAND_UHF,
140
141 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
142 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
143 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
144 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
145
146 1130,
147 21,
148
149 0,
150 118,
151
152 0,
153 3530,
154 1,
155 0,
156
157 65535,
158 33770,
159 65535,
160 23592,
161
162 0,
163 62,
164 255,
165 64,
166 64,
167 132,
168 192,
169 80,
170 80,
171
172 17,
173 27,
174 23,
175 51,
176
177 1,
178 }, {
179 BAND_VHF | BAND_LBAND,
180
181 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
182 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
183 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
184 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
185
186 2372,
187 21,
188
189 0,
190 118,
191
192 0,
193 3530,
194 1,
195 0,
196
197 65535,
198 0,
199 65535,
200 23592,
201
202 0,
203 128,
204 128,
205 128,
206 0,
207 128,
208 253,
209 81,
210 0,
211
212 17,
213 27,
214 23,
215 51,
216
217 1,
218 }
219 };
220
221 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
222 .internal = 60000,
223 .sampling = 30000,
224 .pll_prediv = 1,
225 .pll_ratio = 8,
226 .pll_range = 3,
227 .pll_reset = 1,
228 .pll_bypass = 0,
229 .enable_refdiv = 0,
230 .bypclk_div = 0,
231 .IO_CLK_en_core = 1,
232 .ADClkSrc = 1,
233 .modulo = 2,
234 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
235 .ifreq = 0,
236 .timf = 20452225,
237 };
238
239 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
240 { .output_mpeg2_in_188_bytes = 1,
241 .hostbus_diversity = 1,
242 .tuner_is_baseband = 1,
243
244 .agc_config_count = 2,
245 .agc = stk7700d_7000p_mt2266_agc_config,
246 .bw = &stk7700d_mt2266_pll_config,
247
248 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
249 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
250 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
251 },
252 { .output_mpeg2_in_188_bytes = 1,
253 .hostbus_diversity = 1,
254 .tuner_is_baseband = 1,
255
256 .agc_config_count = 2,
257 .agc = stk7700d_7000p_mt2266_agc_config,
258 .bw = &stk7700d_mt2266_pll_config,
259
260 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
261 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
262 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
263 }
264 };
265
266 static struct mt2266_config stk7700d_mt2266_config[2] = {
267 { .i2c_address = 0x60
268 },
269 { .i2c_address = 0x60
270 }
271 };
272
273 static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
274 {
275 struct dib0700_adapter_state *state = adap->priv;
276
277 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
278 return -ENODEV;
279
280 if (adap->id == 0) {
281 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
282 msleep(10);
283 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
284 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
285 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
286 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
287 msleep(10);
288 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
289 msleep(10);
290 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
291 stk7700d_dib7000p_mt2266_config)
292 != 0) {
293 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
294 dvb_detach(state->dib7000p_ops.set_wbd_ref);
295 return -ENODEV;
296 }
297 }
298
299 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
300 0x80 + (adap->id << 1),
301 &stk7700d_dib7000p_mt2266_config[adap->id]);
302
303 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
304 }
305
306 static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
307 {
308 struct dib0700_adapter_state *state = adap->priv;
309
310 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
311 return -ENODEV;
312
313 if (adap->id == 0) {
314 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
315 msleep(10);
316 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
317 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
318 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
319 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
320 msleep(10);
321 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
322 msleep(10);
323 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
324 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
325 stk7700d_dib7000p_mt2266_config)
326 != 0) {
327 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
328 dvb_detach(state->dib7000p_ops.set_wbd_ref);
329 return -ENODEV;
330 }
331 }
332
333 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
334 0x80 + (adap->id << 1),
335 &stk7700d_dib7000p_mt2266_config[adap->id]);
336
337 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
338 }
339
340 static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
341 {
342 struct i2c_adapter *tun_i2c;
343 struct dib0700_adapter_state *state = adap->priv;
344
345 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
346 DIBX000_I2C_INTERFACE_TUNER, 1);
347 return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
348 &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
349 }
350
351 /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
352 static struct dibx000_agc_config xc3028_agc_config = {
353 .band_caps = BAND_VHF | BAND_UHF,
354 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
355 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
356 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
357 .setup = (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
358 .inv_gain = 712,
359 .time_stabiliz = 21,
360 .alpha_level = 0,
361 .thlock = 118,
362 .wbd_inv = 0,
363 .wbd_ref = 2867,
364 .wbd_sel = 0,
365 .wbd_alpha = 2,
366 .agc1_max = 0,
367 .agc1_min = 0,
368 .agc2_max = 39718,
369 .agc2_min = 9930,
370 .agc1_pt1 = 0,
371 .agc1_pt2 = 0,
372 .agc1_pt3 = 0,
373 .agc1_slope1 = 0,
374 .agc1_slope2 = 0,
375 .agc2_pt1 = 0,
376 .agc2_pt2 = 128,
377 .agc2_slope1 = 29,
378 .agc2_slope2 = 29,
379 .alpha_mant = 17,
380 .alpha_exp = 27,
381 .beta_mant = 23,
382 .beta_exp = 51,
383 .perform_agc_softsplit = 1,
384 };
385
386 /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
387 static struct dibx000_bandwidth_config xc3028_bw_config = {
388 .internal = 60000,
389 .sampling = 30000,
390 .pll_prediv = 1,
391 .pll_ratio = 8,
392 .pll_range = 3,
393 .pll_reset = 1,
394 .pll_bypass = 0,
395 .enable_refdiv = 0,
396 .bypclk_div = 0,
397 .IO_CLK_en_core = 1,
398 .ADClkSrc = 1,
399 .modulo = 0,
400 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
401 .ifreq = (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
402 .timf = 20452225,
403 .xtal_hz = 30000000,
404 };
405
406 static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
407 .output_mpeg2_in_188_bytes = 1,
408 .tuner_is_baseband = 1,
409
410 .agc_config_count = 1,
411 .agc = &xc3028_agc_config,
412 .bw = &xc3028_bw_config,
413
414 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
415 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
416 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
417 };
418
419 static int stk7700ph_xc3028_callback(void *ptr, int component,
420 int command, int arg)
421 {
422 struct dvb_usb_adapter *adap = ptr;
423 struct dib0700_adapter_state *state = adap->priv;
424
425 switch (command) {
426 case XC2028_TUNER_RESET:
427 /* Send the tuner in then out of reset */
428 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
429 msleep(10);
430 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
431 break;
432 case XC2028_RESET_CLK:
433 case XC2028_I2C_FLUSH:
434 break;
435 default:
436 err("%s: unknown command %d, arg %d\n", __func__,
437 command, arg);
438 return -EINVAL;
439 }
440 return 0;
441 }
442
443 static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
444 .fname = XC2028_DEFAULT_FIRMWARE,
445 .max_len = 64,
446 .demod = XC3028_FE_DIBCOM52,
447 };
448
449 static struct xc2028_config stk7700ph_xc3028_config = {
450 .i2c_addr = 0x61,
451 .ctrl = &stk7700ph_xc3028_ctrl,
452 };
453
454 static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
455 {
456 struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
457 struct dib0700_adapter_state *state = adap->priv;
458
459 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
460 return -ENODEV;
461
462 if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
463 desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
464 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
465 else
466 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
467 msleep(20);
468 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
469 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
470 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
471 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
472 msleep(10);
473 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
474 msleep(20);
475 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
476 msleep(10);
477
478 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
479 &stk7700ph_dib7700_xc3028_config) != 0) {
480 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
481 __func__);
482 dvb_detach(state->dib7000p_ops.set_wbd_ref);
483 return -ENODEV;
484 }
485
486 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
487 &stk7700ph_dib7700_xc3028_config);
488
489 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
490 }
491
492 static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
493 {
494 struct i2c_adapter *tun_i2c;
495 struct dib0700_adapter_state *state = adap->priv;
496
497 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
498 DIBX000_I2C_INTERFACE_TUNER, 1);
499
500 stk7700ph_xc3028_config.i2c_adap = tun_i2c;
501
502 /* FIXME: generalize & move to common area */
503 adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
504
505 return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
506 == NULL ? -ENODEV : 0;
507 }
508
509 #define DEFAULT_RC_INTERVAL 50
510
511 /*
512 * This function is used only when firmware is < 1.20 version. Newer
513 * firmwares use bulk mode, with functions implemented at dib0700_core,
514 * at dib0700_rc_urb_completion()
515 */
516 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
517 {
518 enum rc_proto protocol;
519 u32 scancode;
520 u8 toggle;
521 int i;
522 struct dib0700_state *st = d->priv;
523
524 if (st->fw_version >= 0x10200) {
525 /* For 1.20 firmware , We need to keep the RC polling
526 callback so we can reuse the input device setup in
527 dvb-usb-remote.c. However, the actual work is being done
528 in the bulk URB completion handler. */
529 return 0;
530 }
531
532 st->buf[0] = REQUEST_POLL_RC;
533 st->buf[1] = 0;
534
535 i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4);
536 if (i <= 0) {
537 err("RC Query Failed");
538 return -EIO;
539 }
540
541 /* losing half of KEY_0 events from Philipps rc5 remotes.. */
542 if (st->buf[0] == 0 && st->buf[1] == 0
543 && st->buf[2] == 0 && st->buf[3] == 0)
544 return 0;
545
546 /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]); */
547
548 dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
549
550 switch (d->props.rc.core.protocol) {
551 case RC_PROTO_BIT_NEC:
552 /* NEC protocol sends repeat code as 0 0 0 FF */
553 if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) &&
554 (st->buf[3] == 0xff)) {
555 rc_repeat(d->rc_dev);
556 return 0;
557 }
558
559 protocol = RC_PROTO_NEC;
560 scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]);
561 toggle = 0;
562 break;
563
564 default:
565 /* RC-5 protocol changes toggle bit on new keypress */
566 protocol = RC_PROTO_RC5;
567 scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]);
568 toggle = st->buf[3 - 1];
569 break;
570 }
571
572 rc_keydown(d->rc_dev, protocol, scancode, toggle);
573 return 0;
574 }
575
576 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
577 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
578 BAND_UHF | BAND_VHF,
579
580 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
581 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
582 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
583 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
584
585 712,
586 41,
587
588 0,
589 118,
590
591 0,
592 4095,
593 0,
594 0,
595
596 42598,
597 17694,
598 45875,
599 2621,
600 0,
601 76,
602 139,
603 52,
604 59,
605 107,
606 172,
607 57,
608 70,
609
610 21,
611 25,
612 28,
613 48,
614
615 1,
616 { 0,
617 107,
618 51800,
619 24700
620 },
621 };
622
623 static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
624 .band_caps = BAND_UHF | BAND_VHF,
625 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
626 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
627 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
628 .inv_gain = 712,
629 .time_stabiliz = 41,
630 .alpha_level = 0,
631 .thlock = 118,
632 .wbd_inv = 0,
633 .wbd_ref = 4095,
634 .wbd_sel = 0,
635 .wbd_alpha = 0,
636 .agc1_max = 42598,
637 .agc1_min = 16384,
638 .agc2_max = 42598,
639 .agc2_min = 0,
640 .agc1_pt1 = 0,
641 .agc1_pt2 = 137,
642 .agc1_pt3 = 255,
643 .agc1_slope1 = 0,
644 .agc1_slope2 = 255,
645 .agc2_pt1 = 0,
646 .agc2_pt2 = 0,
647 .agc2_slope1 = 0,
648 .agc2_slope2 = 41,
649 .alpha_mant = 15,
650 .alpha_exp = 25,
651 .beta_mant = 28,
652 .beta_exp = 48,
653 .perform_agc_softsplit = 0,
654 };
655
656 static struct dibx000_bandwidth_config stk7700p_pll_config = {
657 .internal = 60000,
658 .sampling = 30000,
659 .pll_prediv = 1,
660 .pll_ratio = 8,
661 .pll_range = 3,
662 .pll_reset = 1,
663 .pll_bypass = 0,
664 .enable_refdiv = 0,
665 .bypclk_div = 0,
666 .IO_CLK_en_core = 1,
667 .ADClkSrc = 1,
668 .modulo = 0,
669 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
670 .ifreq = 60258167,
671 .timf = 20452225,
672 .xtal_hz = 30000000,
673 };
674
675 static struct dib7000m_config stk7700p_dib7000m_config = {
676 .dvbt_mode = 1,
677 .output_mpeg2_in_188_bytes = 1,
678 .quartz_direct = 1,
679
680 .agc_config_count = 1,
681 .agc = &stk7700p_7000m_mt2060_agc_config,
682 .bw = &stk7700p_pll_config,
683
684 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
685 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
686 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
687 };
688
689 static struct dib7000p_config stk7700p_dib7000p_config = {
690 .output_mpeg2_in_188_bytes = 1,
691
692 .agc_config_count = 1,
693 .agc = &stk7700p_7000p_mt2060_agc_config,
694 .bw = &stk7700p_pll_config,
695
696 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
697 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
698 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
699 };
700
701 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
702 {
703 struct dib0700_state *st = adap->dev->priv;
704 struct dib0700_adapter_state *state = adap->priv;
705
706 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
707 return -ENODEV;
708
709 /* unless there is no real power management in DVB - we leave the device on GPIO6 */
710
711 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
712 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
713
714 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
715 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
716
717 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
718 dib0700_ctrl_clock(adap->dev, 72, 1);
719 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
720
721 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
722
723 st->mt2060_if1[0] = 1220;
724
725 if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap)) {
726 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
727 st->is_dib7000pc = 1;
728 } else {
729 memset(&state->dib7000p_ops, 0, sizeof(state->dib7000p_ops));
730 adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
731 }
732
733 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
734 }
735
736 static struct mt2060_config stk7700p_mt2060_config = {
737 0x60
738 };
739
740 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
741 {
742 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
743 struct dib0700_state *st = adap->dev->priv;
744 struct i2c_adapter *tun_i2c;
745 struct dib0700_adapter_state *state = adap->priv;
746 s8 a;
747 int if1=1220;
748
749 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
750 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
751 if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
752 }
753 if (st->is_dib7000pc)
754 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
755 else
756 tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
757
758 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
759 if1) == NULL ? -ENODEV : 0;
760 }
761
762 /* DIB7070 generic */
763 static struct dibx000_agc_config dib7070_agc_config = {
764 .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
765 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
766 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
767 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
768 .inv_gain = 600,
769 .time_stabiliz = 10,
770 .alpha_level = 0,
771 .thlock = 118,
772 .wbd_inv = 0,
773 .wbd_ref = 3530,
774 .wbd_sel = 1,
775 .wbd_alpha = 5,
776 .agc1_max = 65535,
777 .agc1_min = 0,
778 .agc2_max = 65535,
779 .agc2_min = 0,
780 .agc1_pt1 = 0,
781 .agc1_pt2 = 40,
782 .agc1_pt3 = 183,
783 .agc1_slope1 = 206,
784 .agc1_slope2 = 255,
785 .agc2_pt1 = 72,
786 .agc2_pt2 = 152,
787 .agc2_slope1 = 88,
788 .agc2_slope2 = 90,
789 .alpha_mant = 17,
790 .alpha_exp = 27,
791 .beta_mant = 23,
792 .beta_exp = 51,
793 .perform_agc_softsplit = 0,
794 };
795
796 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
797 {
798 struct dvb_usb_adapter *adap = fe->dvb->priv;
799 struct dib0700_adapter_state *state = adap->priv;
800
801 deb_info("reset: %d", onoff);
802 return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff);
803 }
804
805 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
806 {
807 struct dvb_usb_adapter *adap = fe->dvb->priv;
808 struct dib0700_adapter_state *state = adap->priv;
809
810 deb_info("sleep: %d", onoff);
811 return state->dib7000p_ops.set_gpio(fe, 9, 0, onoff);
812 }
813
814 static struct dib0070_config dib7070p_dib0070_config[2] = {
815 {
816 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
817 .reset = dib7070_tuner_reset,
818 .sleep = dib7070_tuner_sleep,
819 .clock_khz = 12000,
820 .clock_pad_drive = 4,
821 .charge_pump = 2,
822 }, {
823 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
824 .reset = dib7070_tuner_reset,
825 .sleep = dib7070_tuner_sleep,
826 .clock_khz = 12000,
827 .charge_pump = 2,
828 }
829 };
830
831 static struct dib0070_config dib7770p_dib0070_config = {
832 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
833 .reset = dib7070_tuner_reset,
834 .sleep = dib7070_tuner_sleep,
835 .clock_khz = 12000,
836 .clock_pad_drive = 0,
837 .flip_chip = 1,
838 .charge_pump = 2,
839 };
840
841 static int dib7070_set_param_override(struct dvb_frontend *fe)
842 {
843 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
844 struct dvb_usb_adapter *adap = fe->dvb->priv;
845 struct dib0700_adapter_state *state = adap->priv;
846
847 u16 offset;
848 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
849 switch (band) {
850 case BAND_VHF: offset = 950; break;
851 case BAND_UHF:
852 default: offset = 550; break;
853 }
854 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
855 state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
856 return state->set_param_save(fe);
857 }
858
859 static int dib7770_set_param_override(struct dvb_frontend *fe)
860 {
861 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
862 struct dvb_usb_adapter *adap = fe->dvb->priv;
863 struct dib0700_adapter_state *state = adap->priv;
864
865 u16 offset;
866 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
867 switch (band) {
868 case BAND_VHF:
869 state->dib7000p_ops.set_gpio(fe, 0, 0, 1);
870 offset = 850;
871 break;
872 case BAND_UHF:
873 default:
874 state->dib7000p_ops.set_gpio(fe, 0, 0, 0);
875 offset = 250;
876 break;
877 }
878 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
879 state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
880 return state->set_param_save(fe);
881 }
882
883 static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
884 {
885 struct dib0700_adapter_state *st = adap->priv;
886 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
887 DIBX000_I2C_INTERFACE_TUNER, 1);
888
889 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
890 &dib7770p_dib0070_config) == NULL)
891 return -ENODEV;
892
893 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
894 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
895 return 0;
896 }
897
898 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
899 {
900 struct dib0700_adapter_state *st = adap->priv;
901 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
902
903 if (adap->id == 0) {
904 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
905 return -ENODEV;
906 } else {
907 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
908 return -ENODEV;
909 }
910
911 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
912 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
913 return 0;
914 }
915
916 static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
917 u16 pid, int onoff)
918 {
919 struct dib0700_adapter_state *state = adapter->priv;
920 struct dib0700_state *st = adapter->dev->priv;
921
922 if (st->is_dib7000pc)
923 return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
924 return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
925 }
926
927 static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
928 {
929 struct dib0700_state *st = adapter->dev->priv;
930 struct dib0700_adapter_state *state = adapter->priv;
931 if (st->is_dib7000pc)
932 return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
933 return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
934 }
935
936 static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
937 {
938 struct dib0700_adapter_state *state = adapter->priv;
939 return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
940 }
941
942 static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
943 {
944 struct dib0700_adapter_state *state = adapter->priv;
945 return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
946 }
947
948 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
949 .internal = 60000,
950 .sampling = 15000,
951 .pll_prediv = 1,
952 .pll_ratio = 20,
953 .pll_range = 3,
954 .pll_reset = 1,
955 .pll_bypass = 0,
956 .enable_refdiv = 0,
957 .bypclk_div = 0,
958 .IO_CLK_en_core = 1,
959 .ADClkSrc = 1,
960 .modulo = 2,
961 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
962 .ifreq = (0 << 25) | 0,
963 .timf = 20452225,
964 .xtal_hz = 12000000,
965 };
966
967 static struct dib7000p_config dib7070p_dib7000p_config = {
968 .output_mpeg2_in_188_bytes = 1,
969
970 .agc_config_count = 1,
971 .agc = &dib7070_agc_config,
972 .bw = &dib7070_bw_config_12_mhz,
973 .tuner_is_baseband = 1,
974 .spur_protect = 1,
975
976 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
977 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
978 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
979
980 .hostbus_diversity = 1,
981 };
982
983 /* STK7070P */
984 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
985 {
986 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
987 struct dib0700_adapter_state *state = adap->priv;
988
989 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
990 return -ENODEV;
991
992 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
993 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
994 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
995 else
996 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
997 msleep(10);
998 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
999 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1000 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1001 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1002
1003 dib0700_ctrl_clock(adap->dev, 72, 1);
1004
1005 msleep(10);
1006 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1007 msleep(10);
1008 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1009
1010 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1011 &dib7070p_dib7000p_config) != 0) {
1012 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
1013 __func__);
1014 dvb_detach(state->dib7000p_ops.set_wbd_ref);
1015 return -ENODEV;
1016 }
1017
1018 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
1019 &dib7070p_dib7000p_config);
1020 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1021 }
1022
1023 /* STK7770P */
1024 static struct dib7000p_config dib7770p_dib7000p_config = {
1025 .output_mpeg2_in_188_bytes = 1,
1026
1027 .agc_config_count = 1,
1028 .agc = &dib7070_agc_config,
1029 .bw = &dib7070_bw_config_12_mhz,
1030 .tuner_is_baseband = 1,
1031 .spur_protect = 1,
1032
1033 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1034 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1035 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1036
1037 .hostbus_diversity = 1,
1038 .enable_current_mirror = 1,
1039 .disable_sample_and_hold = 0,
1040 };
1041
1042 static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
1043 {
1044 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
1045 struct dib0700_adapter_state *state = adap->priv;
1046
1047 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
1048 return -ENODEV;
1049
1050 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
1051 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
1052 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1053 else
1054 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1055 msleep(10);
1056 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1057 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1058 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1059 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1060
1061 dib0700_ctrl_clock(adap->dev, 72, 1);
1062
1063 msleep(10);
1064 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1065 msleep(10);
1066 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1067
1068 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1069 &dib7770p_dib7000p_config) != 0) {
1070 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
1071 __func__);
1072 dvb_detach(state->dib7000p_ops.set_wbd_ref);
1073 return -ENODEV;
1074 }
1075
1076 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
1077 &dib7770p_dib7000p_config);
1078 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1079 }
1080
1081 /* DIB807x generic */
1082 static struct dibx000_agc_config dib807x_agc_config[2] = {
1083 {
1084 BAND_VHF,
1085 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1086 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1087 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
1088 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1089 * P_agc_write=0 */
1090 (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
1091 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1092 (0 << 0), /* setup*/
1093
1094 600, /* inv_gain*/
1095 10, /* time_stabiliz*/
1096
1097 0, /* alpha_level*/
1098 118, /* thlock*/
1099
1100 0, /* wbd_inv*/
1101 3530, /* wbd_ref*/
1102 1, /* wbd_sel*/
1103 5, /* wbd_alpha*/
1104
1105 65535, /* agc1_max*/
1106 0, /* agc1_min*/
1107
1108 65535, /* agc2_max*/
1109 0, /* agc2_min*/
1110
1111 0, /* agc1_pt1*/
1112 40, /* agc1_pt2*/
1113 183, /* agc1_pt3*/
1114 206, /* agc1_slope1*/
1115 255, /* agc1_slope2*/
1116 72, /* agc2_pt1*/
1117 152, /* agc2_pt2*/
1118 88, /* agc2_slope1*/
1119 90, /* agc2_slope2*/
1120
1121 17, /* alpha_mant*/
1122 27, /* alpha_exp*/
1123 23, /* beta_mant*/
1124 51, /* beta_exp*/
1125
1126 0, /* perform_agc_softsplit*/
1127 }, {
1128 BAND_UHF,
1129 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1130 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1131 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1132 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1133 * P_agc_write=0 */
1134 (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
1135 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1136 (0 << 0), /* setup */
1137
1138 600, /* inv_gain*/
1139 10, /* time_stabiliz*/
1140
1141 0, /* alpha_level*/
1142 118, /* thlock*/
1143
1144 0, /* wbd_inv*/
1145 3530, /* wbd_ref*/
1146 1, /* wbd_sel*/
1147 5, /* wbd_alpha*/
1148
1149 65535, /* agc1_max*/
1150 0, /* agc1_min*/
1151
1152 65535, /* agc2_max*/
1153 0, /* agc2_min*/
1154
1155 0, /* agc1_pt1*/
1156 40, /* agc1_pt2*/
1157 183, /* agc1_pt3*/
1158 206, /* agc1_slope1*/
1159 255, /* agc1_slope2*/
1160 72, /* agc2_pt1*/
1161 152, /* agc2_pt2*/
1162 88, /* agc2_slope1*/
1163 90, /* agc2_slope2*/
1164
1165 17, /* alpha_mant*/
1166 27, /* alpha_exp*/
1167 23, /* beta_mant*/
1168 51, /* beta_exp*/
1169
1170 0, /* perform_agc_softsplit*/
1171 }
1172 };
1173
1174 static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
1175 .internal = 60000,
1176 .sampling = 15000,
1177 .pll_prediv = 1,
1178 .pll_ratio = 20,
1179 .pll_range = 3,
1180 .pll_reset = 1,
1181 .pll_bypass = 0,
1182 .enable_refdiv = 0,
1183 .bypclk_div = 0,
1184 .IO_CLK_en_core = 1,
1185 .ADClkSrc = 1,
1186 .modulo = 2,
1187 .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
1188 .ifreq = (0 << 25) | 0, /* ifreq = 0.000000 MHz*/
1189 .timf = 18179755,
1190 .xtal_hz = 12000000,
1191 };
1192
1193 static struct dib8000_config dib807x_dib8000_config[2] = {
1194 {
1195 .output_mpeg2_in_188_bytes = 1,
1196
1197 .agc_config_count = 2,
1198 .agc = dib807x_agc_config,
1199 .pll = &dib807x_bw_config_12_mhz,
1200 .tuner_is_baseband = 1,
1201
1202 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1203 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1204 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1205
1206 .hostbus_diversity = 1,
1207 .div_cfg = 1,
1208 .agc_control = &dib0070_ctrl_agc_filter,
1209 .output_mode = OUTMODE_MPEG2_FIFO,
1210 .drives = 0x2d98,
1211 }, {
1212 .output_mpeg2_in_188_bytes = 1,
1213
1214 .agc_config_count = 2,
1215 .agc = dib807x_agc_config,
1216 .pll = &dib807x_bw_config_12_mhz,
1217 .tuner_is_baseband = 1,
1218
1219 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1220 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1221 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1222
1223 .hostbus_diversity = 1,
1224 .agc_control = &dib0070_ctrl_agc_filter,
1225 .output_mode = OUTMODE_MPEG2_FIFO,
1226 .drives = 0x2d98,
1227 }
1228 };
1229
1230 static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
1231 {
1232 struct dvb_usb_adapter *adap = fe->dvb->priv;
1233 struct dib0700_adapter_state *state = adap->priv;
1234
1235 return state->dib8000_ops.set_gpio(fe, 5, 0, !onoff);
1236 }
1237
1238 static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
1239 {
1240 struct dvb_usb_adapter *adap = fe->dvb->priv;
1241 struct dib0700_adapter_state *state = adap->priv;
1242
1243 return state->dib8000_ops.set_gpio(fe, 0, 0, onoff);
1244 }
1245
1246 static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
1247 { 240, 7},
1248 { 0xffff, 6},
1249 };
1250
1251 static struct dib0070_config dib807x_dib0070_config[2] = {
1252 {
1253 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1254 .reset = dib80xx_tuner_reset,
1255 .sleep = dib80xx_tuner_sleep,
1256 .clock_khz = 12000,
1257 .clock_pad_drive = 4,
1258 .vga_filter = 1,
1259 .force_crystal_mode = 1,
1260 .enable_third_order_filter = 1,
1261 .charge_pump = 0,
1262 .wbd_gain = dib8070_wbd_gain_cfg,
1263 .osc_buffer_state = 0,
1264 .freq_offset_khz_uhf = -100,
1265 .freq_offset_khz_vhf = -100,
1266 }, {
1267 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1268 .reset = dib80xx_tuner_reset,
1269 .sleep = dib80xx_tuner_sleep,
1270 .clock_khz = 12000,
1271 .clock_pad_drive = 2,
1272 .vga_filter = 1,
1273 .force_crystal_mode = 1,
1274 .enable_third_order_filter = 1,
1275 .charge_pump = 0,
1276 .wbd_gain = dib8070_wbd_gain_cfg,
1277 .osc_buffer_state = 0,
1278 .freq_offset_khz_uhf = -25,
1279 .freq_offset_khz_vhf = -25,
1280 }
1281 };
1282
1283 static int dib807x_set_param_override(struct dvb_frontend *fe)
1284 {
1285 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
1286 struct dvb_usb_adapter *adap = fe->dvb->priv;
1287 struct dib0700_adapter_state *state = adap->priv;
1288
1289 u16 offset = dib0070_wbd_offset(fe);
1290 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
1291 switch (band) {
1292 case BAND_VHF:
1293 offset += 750;
1294 break;
1295 case BAND_UHF: /* fall-thru wanted */
1296 default:
1297 offset += 250; break;
1298 }
1299 deb_info("WBD for DiB8000: %d\n", offset);
1300 state->dib8000_ops.set_wbd_ref(fe, offset);
1301
1302 return state->set_param_save(fe);
1303 }
1304
1305 static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
1306 {
1307 struct dib0700_adapter_state *st = adap->priv;
1308 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe,
1309 DIBX000_I2C_INTERFACE_TUNER, 1);
1310
1311 if (adap->id == 0) {
1312 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1313 &dib807x_dib0070_config[0]) == NULL)
1314 return -ENODEV;
1315 } else {
1316 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1317 &dib807x_dib0070_config[1]) == NULL)
1318 return -ENODEV;
1319 }
1320
1321 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1322 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
1323 return 0;
1324 }
1325
1326 static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
1327 u16 pid, int onoff)
1328 {
1329 struct dib0700_adapter_state *state = adapter->priv;
1330
1331 return state->dib8000_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
1332 }
1333
1334 static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
1335 int onoff)
1336 {
1337 struct dib0700_adapter_state *state = adapter->priv;
1338
1339 return state->dib8000_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
1340 }
1341
1342 /* STK807x */
1343 static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
1344 {
1345 struct dib0700_adapter_state *state = adap->priv;
1346
1347 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1348 return -ENODEV;
1349
1350 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1351 msleep(10);
1352 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1353 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1354 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1355
1356 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1357
1358 dib0700_ctrl_clock(adap->dev, 72, 1);
1359
1360 msleep(10);
1361 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1362 msleep(10);
1363 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1364
1365 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1366 0x80, 0);
1367
1368 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
1369 &dib807x_dib8000_config[0]);
1370
1371 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1372 }
1373
1374 /* STK807xPVR */
1375 static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
1376 {
1377 struct dib0700_adapter_state *state = adap->priv;
1378
1379 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1380 return -ENODEV;
1381
1382 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1383 msleep(30);
1384 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1385 msleep(500);
1386 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1387 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1388 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1389
1390 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1391
1392 dib0700_ctrl_clock(adap->dev, 72, 1);
1393
1394 msleep(10);
1395 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1396 msleep(10);
1397 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1398
1399 /* initialize IC 0 */
1400 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
1401
1402 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
1403 &dib807x_dib8000_config[0]);
1404
1405 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1406 }
1407
1408 static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
1409 {
1410 struct dib0700_adapter_state *state = adap->priv;
1411
1412 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1413 return -ENODEV;
1414
1415 /* initialize IC 1 */
1416 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
1417
1418 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82,
1419 &dib807x_dib8000_config[1]);
1420
1421 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1422 }
1423
1424 /* STK8096GP */
1425 static struct dibx000_agc_config dib8090_agc_config[2] = {
1426 {
1427 .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
1428 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1429 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1430 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1431 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1432 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1433
1434 .inv_gain = 787,
1435 .time_stabiliz = 10,
1436
1437 .alpha_level = 0,
1438 .thlock = 118,
1439
1440 .wbd_inv = 0,
1441 .wbd_ref = 3530,
1442 .wbd_sel = 1,
1443 .wbd_alpha = 5,
1444
1445 .agc1_max = 65535,
1446 .agc1_min = 0,
1447
1448 .agc2_max = 65535,
1449 .agc2_min = 0,
1450
1451 .agc1_pt1 = 0,
1452 .agc1_pt2 = 32,
1453 .agc1_pt3 = 114,
1454 .agc1_slope1 = 143,
1455 .agc1_slope2 = 144,
1456 .agc2_pt1 = 114,
1457 .agc2_pt2 = 227,
1458 .agc2_slope1 = 116,
1459 .agc2_slope2 = 117,
1460
1461 .alpha_mant = 28,
1462 .alpha_exp = 26,
1463 .beta_mant = 31,
1464 .beta_exp = 51,
1465
1466 .perform_agc_softsplit = 0,
1467 },
1468 {
1469 .band_caps = BAND_CBAND,
1470 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1471 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1472 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1473 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1474 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1475
1476 .inv_gain = 787,
1477 .time_stabiliz = 10,
1478
1479 .alpha_level = 0,
1480 .thlock = 118,
1481
1482 .wbd_inv = 0,
1483 .wbd_ref = 3530,
1484 .wbd_sel = 1,
1485 .wbd_alpha = 5,
1486
1487 .agc1_max = 0,
1488 .agc1_min = 0,
1489
1490 .agc2_max = 65535,
1491 .agc2_min = 0,
1492
1493 .agc1_pt1 = 0,
1494 .agc1_pt2 = 32,
1495 .agc1_pt3 = 114,
1496 .agc1_slope1 = 143,
1497 .agc1_slope2 = 144,
1498 .agc2_pt1 = 114,
1499 .agc2_pt2 = 227,
1500 .agc2_slope1 = 116,
1501 .agc2_slope2 = 117,
1502
1503 .alpha_mant = 28,
1504 .alpha_exp = 26,
1505 .beta_mant = 31,
1506 .beta_exp = 51,
1507
1508 .perform_agc_softsplit = 0,
1509 }
1510 };
1511
1512 static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
1513 .internal = 54000,
1514 .sampling = 13500,
1515
1516 .pll_prediv = 1,
1517 .pll_ratio = 18,
1518 .pll_range = 3,
1519 .pll_reset = 1,
1520 .pll_bypass = 0,
1521
1522 .enable_refdiv = 0,
1523 .bypclk_div = 0,
1524 .IO_CLK_en_core = 1,
1525 .ADClkSrc = 1,
1526 .modulo = 2,
1527
1528 .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0),
1529
1530 .ifreq = (0 << 25) | 0,
1531 .timf = 20199727,
1532
1533 .xtal_hz = 12000000,
1534 };
1535
1536 static int dib8090_get_adc_power(struct dvb_frontend *fe)
1537 {
1538 struct dvb_usb_adapter *adap = fe->dvb->priv;
1539 struct dib0700_adapter_state *state = adap->priv;
1540
1541 return state->dib8000_ops.get_adc_power(fe, 1);
1542 }
1543
1544 static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart)
1545 {
1546 deb_info("AGC control callback: %i\n", restart);
1547 dib0090_dcc_freq(fe, restart);
1548
1549 if (restart == 0) /* before AGC startup */
1550 dib0090_set_dc_servo(fe, 1);
1551 }
1552
1553 static struct dib8000_config dib809x_dib8000_config[2] = {
1554 {
1555 .output_mpeg2_in_188_bytes = 1,
1556
1557 .agc_config_count = 2,
1558 .agc = dib8090_agc_config,
1559 .agc_control = dib8090_agc_control,
1560 .pll = &dib8090_pll_config_12mhz,
1561 .tuner_is_baseband = 1,
1562
1563 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1564 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1565 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1566
1567 .hostbus_diversity = 1,
1568 .div_cfg = 0x31,
1569 .output_mode = OUTMODE_MPEG2_FIFO,
1570 .drives = 0x2d98,
1571 .diversity_delay = 48,
1572 .refclksel = 3,
1573 }, {
1574 .output_mpeg2_in_188_bytes = 1,
1575
1576 .agc_config_count = 2,
1577 .agc = dib8090_agc_config,
1578 .agc_control = dib8090_agc_control,
1579 .pll = &dib8090_pll_config_12mhz,
1580 .tuner_is_baseband = 1,
1581
1582 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1583 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1584 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1585
1586 .hostbus_diversity = 1,
1587 .div_cfg = 0x31,
1588 .output_mode = OUTMODE_DIVERSITY,
1589 .drives = 0x2d08,
1590 .diversity_delay = 1,
1591 .refclksel = 3,
1592 }
1593 };
1594
1595 static struct dib0090_wbd_slope dib8090_wbd_table[] = {
1596 /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
1597 { 120, 0, 500, 0, 500, 4 }, /* CBAND */
1598 { 170, 0, 450, 0, 450, 4 }, /* CBAND */
1599 { 380, 48, 373, 28, 259, 6 }, /* VHF */
1600 { 860, 34, 700, 36, 616, 6 }, /* high UHF */
1601 { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */
1602 };
1603
1604 static struct dib0090_config dib809x_dib0090_config = {
1605 .io.pll_bypass = 1,
1606 .io.pll_range = 1,
1607 .io.pll_prediv = 1,
1608 .io.pll_loopdiv = 20,
1609 .io.adc_clock_ratio = 8,
1610 .io.pll_int_loop_filt = 0,
1611 .io.clock_khz = 12000,
1612 .reset = dib80xx_tuner_reset,
1613 .sleep = dib80xx_tuner_sleep,
1614 .clkouttobamse = 1,
1615 .analog_output = 1,
1616 .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
1617 .use_pwm_agc = 1,
1618 .clkoutdrive = 1,
1619 .get_adc_power = dib8090_get_adc_power,
1620 .freq_offset_khz_uhf = -63,
1621 .freq_offset_khz_vhf = -143,
1622 .wbd = dib8090_wbd_table,
1623 .fref_clock_ratio = 6,
1624 };
1625
1626 static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe)
1627 {
1628 u8 optimal_pll_ratio = 20;
1629 u32 freq_adc, ratio, rest, max = 0;
1630 u8 pll_ratio;
1631
1632 for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) {
1633 freq_adc = 12 * pll_ratio * (1 << 8) / 16;
1634 ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc;
1635 rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc;
1636
1637 if (rest > freq_adc / 2)
1638 rest = freq_adc - rest;
1639 deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest);
1640 if ((rest > max) && (rest > 717)) {
1641 optimal_pll_ratio = pll_ratio;
1642 max = rest;
1643 }
1644 }
1645 deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio);
1646
1647 return optimal_pll_ratio;
1648 }
1649
1650 static int dib8096_set_param_override(struct dvb_frontend *fe)
1651 {
1652 struct dvb_usb_adapter *adap = fe->dvb->priv;
1653 struct dib0700_adapter_state *state = adap->priv;
1654 u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
1655 u16 target, ltgain, rf_gain_limit;
1656 u32 timf;
1657 int ret = 0;
1658 enum frontend_tune_state tune_state = CT_SHUTDOWN;
1659
1660 switch (band) {
1661 default:
1662 deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
1663 /* fall through */
1664 case BAND_VHF:
1665 state->dib8000_ops.set_gpio(fe, 3, 0, 1);
1666 break;
1667 case BAND_UHF:
1668 state->dib8000_ops.set_gpio(fe, 3, 0, 0);
1669 break;
1670 }
1671
1672 ret = state->set_param_save(fe);
1673 if (ret < 0)
1674 return ret;
1675
1676 if (fe->dtv_property_cache.bandwidth_hz != 6000000) {
1677 deb_info("only 6MHz bandwidth is supported\n");
1678 return -EINVAL;
1679 }
1680
1681 /* Update PLL if needed ratio */
1682 state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
1683
1684 /* Get optimize PLL ratio to remove spurious */
1685 pll_ratio = dib8090_compute_pll_parameters(fe);
1686 if (pll_ratio == 17)
1687 timf = 21387946;
1688 else if (pll_ratio == 18)
1689 timf = 20199727;
1690 else if (pll_ratio == 19)
1691 timf = 19136583;
1692 else
1693 timf = 18179756;
1694
1695 /* Update ratio */
1696 state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
1697
1698 state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
1699
1700 if (band != BAND_CBAND) {
1701 /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */
1702 target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
1703 state->dib8000_ops.set_wbd_ref(fe, target);
1704 }
1705
1706 if (band == BAND_CBAND) {
1707 deb_info("tuning in CBAND - soft-AGC startup\n");
1708 dib0090_set_tune_state(fe, CT_AGC_START);
1709
1710 do {
1711 ret = dib0090_gain_control(fe);
1712 msleep(ret);
1713 tune_state = dib0090_get_tune_state(fe);
1714 if (tune_state == CT_AGC_STEP_0)
1715 state->dib8000_ops.set_gpio(fe, 6, 0, 1);
1716 else if (tune_state == CT_AGC_STEP_1) {
1717 dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
1718 if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */
1719 state->dib8000_ops.set_gpio(fe, 6, 0, 0);
1720 }
1721 } while (tune_state < CT_AGC_STOP);
1722
1723 deb_info("switching to PWM AGC\n");
1724 dib0090_pwm_gain_reset(fe);
1725 state->dib8000_ops.pwm_agc_reset(fe);
1726 state->dib8000_ops.set_tune_state(fe, CT_DEMOD_START);
1727 } else {
1728 /* for everything else than CBAND we are using standard AGC */
1729 deb_info("not tuning in CBAND - standard AGC startup\n");
1730 dib0090_pwm_gain_reset(fe);
1731 }
1732
1733 return 0;
1734 }
1735
1736 static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
1737 {
1738 struct dib0700_adapter_state *st = adap->priv;
1739 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1740
1741 if (adap->id == 0) {
1742 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1743 return -ENODEV;
1744 } else {
1745 /* FIXME: check if it is fe_adap[1] */
1746 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1747 return -ENODEV;
1748 }
1749
1750 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1751 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1752 return 0;
1753 }
1754
1755 static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
1756 {
1757 struct dib0700_adapter_state *state = adap->priv;
1758
1759 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1760 return -ENODEV;
1761
1762 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1763 msleep(10);
1764 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1765 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1766 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1767
1768 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1769
1770 dib0700_ctrl_clock(adap->dev, 72, 1);
1771
1772 msleep(10);
1773 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1774 msleep(10);
1775 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1776
1777 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
1778
1779 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1780
1781 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1782 }
1783
1784 static int stk809x_frontend1_attach(struct dvb_usb_adapter *adap)
1785 {
1786 struct dib0700_adapter_state *state = adap->priv;
1787
1788 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1789 return -ENODEV;
1790
1791 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x82, 0);
1792
1793 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
1794
1795 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1796 }
1797
1798 static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
1799 {
1800 struct dib0700_adapter_state *st = adap->priv;
1801 struct i2c_adapter *tun_i2c;
1802 struct dvb_frontend *fe_slave = st->dib8000_ops.get_slave_frontend(adap->fe_adap[0].fe, 1);
1803
1804 if (fe_slave) {
1805 tun_i2c = st->dib8000_ops.get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
1806 if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
1807 return -ENODEV;
1808 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
1809 fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
1810 }
1811 tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1812 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1813 return -ENODEV;
1814
1815 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1816 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1817
1818 return 0;
1819 }
1820
1821 static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
1822 {
1823 struct dvb_frontend *fe_slave;
1824 struct dib0700_adapter_state *state = adap->priv;
1825
1826 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1827 return -ENODEV;
1828
1829 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1830 msleep(20);
1831 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1832 msleep(1000);
1833 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1834 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1835 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1836
1837 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1838
1839 dib0700_ctrl_clock(adap->dev, 72, 1);
1840
1841 msleep(20);
1842 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1843 msleep(20);
1844 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1845
1846 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
1847
1848 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1849 if (adap->fe_adap[0].fe == NULL)
1850 return -ENODEV;
1851
1852 /* Needed to increment refcount */
1853 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1854 return -ENODEV;
1855
1856 fe_slave = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
1857 state->dib8000_ops.set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
1858
1859 return fe_slave == NULL ? -ENODEV : 0;
1860 }
1861
1862 /* TFE8096P */
1863 static struct dibx000_agc_config dib8096p_agc_config[2] = {
1864 {
1865 .band_caps = BAND_UHF,
1866 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1867 P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1868 P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1869 P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1870 P_agc_write=0 */
1871 .setup = (0 << 15) | (0 << 14) | (5 << 11)
1872 | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
1873 | (0 << 4) | (5 << 1) | (0 << 0),
1874
1875 .inv_gain = 684,
1876 .time_stabiliz = 10,
1877
1878 .alpha_level = 0,
1879 .thlock = 118,
1880
1881 .wbd_inv = 0,
1882 .wbd_ref = 1200,
1883 .wbd_sel = 3,
1884 .wbd_alpha = 5,
1885
1886 .agc1_max = 65535,
1887 .agc1_min = 0,
1888
1889 .agc2_max = 32767,
1890 .agc2_min = 0,
1891
1892 .agc1_pt1 = 0,
1893 .agc1_pt2 = 0,
1894 .agc1_pt3 = 105,
1895 .agc1_slope1 = 0,
1896 .agc1_slope2 = 156,
1897 .agc2_pt1 = 105,
1898 .agc2_pt2 = 255,
1899 .agc2_slope1 = 54,
1900 .agc2_slope2 = 0,
1901
1902 .alpha_mant = 28,
1903 .alpha_exp = 26,
1904 .beta_mant = 31,
1905 .beta_exp = 51,
1906
1907 .perform_agc_softsplit = 0,
1908 } , {
1909 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
1910 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1911 P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1912 P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1913 P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1914 P_agc_write=0 */
1915 .setup = (0 << 15) | (0 << 14) | (5 << 11)
1916 | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
1917 | (0 << 4) | (5 << 1) | (0 << 0),
1918
1919 .inv_gain = 732,
1920 .time_stabiliz = 10,
1921
1922 .alpha_level = 0,
1923 .thlock = 118,
1924
1925 .wbd_inv = 0,
1926 .wbd_ref = 1200,
1927 .wbd_sel = 3,
1928 .wbd_alpha = 5,
1929
1930 .agc1_max = 65535,
1931 .agc1_min = 0,
1932
1933 .agc2_max = 32767,
1934 .agc2_min = 0,
1935
1936 .agc1_pt1 = 0,
1937 .agc1_pt2 = 0,
1938 .agc1_pt3 = 98,
1939 .agc1_slope1 = 0,
1940 .agc1_slope2 = 167,
1941 .agc2_pt1 = 98,
1942 .agc2_pt2 = 255,
1943 .agc2_slope1 = 52,
1944 .agc2_slope2 = 0,
1945
1946 .alpha_mant = 28,
1947 .alpha_exp = 26,
1948 .beta_mant = 31,
1949 .beta_exp = 51,
1950
1951 .perform_agc_softsplit = 0,
1952 }
1953 };
1954
1955 static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
1956 .internal = 108000,
1957 .sampling = 13500,
1958 .pll_prediv = 1,
1959 .pll_ratio = 9,
1960 .pll_range = 1,
1961 .pll_reset = 0,
1962 .pll_bypass = 0,
1963 .enable_refdiv = 0,
1964 .bypclk_div = 0,
1965 .IO_CLK_en_core = 0,
1966 .ADClkSrc = 0,
1967 .modulo = 2,
1968 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
1969 .ifreq = (0 << 25) | 0,
1970 .timf = 20199729,
1971 .xtal_hz = 12000000,
1972 };
1973
1974 static struct dib8000_config tfe8096p_dib8000_config = {
1975 .output_mpeg2_in_188_bytes = 1,
1976 .hostbus_diversity = 1,
1977 .update_lna = NULL,
1978
1979 .agc_config_count = 2,
1980 .agc = dib8096p_agc_config,
1981 .pll = &dib8096p_clock_config_12_mhz,
1982
1983 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1984 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1985 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1986
1987 .agc_control = NULL,
1988 .diversity_delay = 48,
1989 .output_mode = OUTMODE_MPEG2_FIFO,
1990 .enMpegOutput = 1,
1991 };
1992
1993 static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
1994 { 380, 81, 850, 64, 540, 4},
1995 { 860, 51, 866, 21, 375, 4},
1996 {1700, 0, 250, 0, 100, 6},
1997 {2600, 0, 250, 0, 100, 6},
1998 { 0xFFFF, 0, 0, 0, 0, 0},
1999 };
2000
2001 static struct dib0090_config tfe8096p_dib0090_config = {
2002 .io.clock_khz = 12000,
2003 .io.pll_bypass = 0,
2004 .io.pll_range = 0,
2005 .io.pll_prediv = 3,
2006 .io.pll_loopdiv = 6,
2007 .io.adc_clock_ratio = 0,
2008 .io.pll_int_loop_filt = 0,
2009
2010 .freq_offset_khz_uhf = -143,
2011 .freq_offset_khz_vhf = -143,
2012
2013 .get_adc_power = dib8090_get_adc_power,
2014
2015 .clkouttobamse = 1,
2016 .analog_output = 0,
2017
2018 .wbd_vhf_offset = 0,
2019 .wbd_cband_offset = 0,
2020 .use_pwm_agc = 1,
2021 .clkoutdrive = 0,
2022
2023 .fref_clock_ratio = 1,
2024
2025 .ls_cfg_pad_drv = 0,
2026 .data_tx_drv = 0,
2027 .low_if = NULL,
2028 .in_soc = 1,
2029 .force_cband_input = 0,
2030 };
2031
2032 struct dibx090p_adc {
2033 u32 freq; /* RF freq MHz */
2034 u32 timf; /* New Timf */
2035 u32 pll_loopdiv; /* New prediv */
2036 u32 pll_prediv; /* New loopdiv */
2037 };
2038
2039 struct dibx090p_best_adc {
2040 u32 timf;
2041 u32 pll_loopdiv;
2042 u32 pll_prediv;
2043 };
2044
2045 static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc)
2046 {
2047 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
2048 u16 xtal = 12000;
2049 u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */
2050 u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */
2051 u32 fmem_max = 140000; /* 140MHz max SDRAM freq */
2052 u32 fdem_min = 66000;
2053 u32 fcp = 0, fs = 0, fdem = 0, fmem = 0;
2054 u32 harmonic_id = 0;
2055
2056 adc->timf = 0;
2057 adc->pll_loopdiv = loopdiv;
2058 adc->pll_prediv = prediv;
2059
2060 deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz);
2061
2062 /* Find Min and Max prediv */
2063 while ((xtal / max_prediv) >= fcp_min)
2064 max_prediv++;
2065
2066 max_prediv--;
2067 min_prediv = max_prediv;
2068 while ((xtal / min_prediv) <= fcp_max) {
2069 min_prediv--;
2070 if (min_prediv == 1)
2071 break;
2072 }
2073 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2074
2075 min_prediv = 1;
2076
2077 for (prediv = min_prediv; prediv < max_prediv; prediv++) {
2078 fcp = xtal / prediv;
2079 if (fcp > fcp_min && fcp < fcp_max) {
2080 for (loopdiv = 1; loopdiv < 64; loopdiv++) {
2081 fmem = ((xtal/prediv) * loopdiv);
2082 fdem = fmem / 2;
2083 fs = fdem / 4;
2084
2085 /* test min/max system restrictions */
2086 if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) {
2087 spur = 0;
2088 /* test fs harmonics positions */
2089 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) {
2090 if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) {
2091 spur = 1;
2092 break;
2093 }
2094 }
2095
2096 if (!spur) {
2097 adc->pll_loopdiv = loopdiv;
2098 adc->pll_prediv = prediv;
2099 adc->timf = (4260880253U / fdem) * (1 << 8);
2100 adc->timf += ((4260880253U % fdem) << 8) / fdem;
2101
2102 deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf);
2103 break;
2104 }
2105 }
2106 }
2107 }
2108 if (!spur)
2109 break;
2110 }
2111
2112 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2113 return -EINVAL;
2114 return 0;
2115 }
2116
2117 static int dib8096p_agc_startup(struct dvb_frontend *fe)
2118 {
2119 struct dvb_usb_adapter *adap = fe->dvb->priv;
2120 struct dib0700_adapter_state *state = adap->priv;
2121 struct dibx000_bandwidth_config pll;
2122 struct dibx090p_best_adc adc;
2123 u16 target;
2124 int ret;
2125
2126 ret = state->set_param_save(fe);
2127 if (ret < 0)
2128 return ret;
2129 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2130
2131 dib0090_pwm_gain_reset(fe);
2132 /* dib0090_get_wbd_target is returning any possible
2133 temperature compensated wbd-target */
2134 target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
2135 state->dib8000_ops.set_wbd_ref(fe, target);
2136
2137 if (dib8096p_get_best_sampling(fe, &adc) == 0) {
2138 pll.pll_ratio = adc.pll_loopdiv;
2139 pll.pll_prediv = adc.pll_prediv;
2140
2141 dib0700_set_i2c_speed(adap->dev, 200);
2142 state->dib8000_ops.update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
2143 state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2144 dib0700_set_i2c_speed(adap->dev, 1000);
2145 }
2146 return 0;
2147 }
2148
2149 static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
2150 {
2151 struct dib0700_state *st = adap->dev->priv;
2152 u32 fw_version;
2153 struct dib0700_adapter_state *state = adap->priv;
2154
2155 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
2156 return -ENODEV;
2157
2158 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2159 if (fw_version >= 0x10200)
2160 st->fw_use_new_i2c_api = 1;
2161
2162 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2163 msleep(20);
2164 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2165 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2166 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2167
2168 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2169
2170 dib0700_ctrl_clock(adap->dev, 72, 1);
2171
2172 msleep(20);
2173 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2174 msleep(20);
2175 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2176
2177 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
2178
2179 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap,
2180 0x80, &tfe8096p_dib8000_config);
2181
2182 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2183 }
2184
2185 static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
2186 {
2187 struct dib0700_adapter_state *st = adap->priv;
2188 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_tuner(adap->fe_adap[0].fe);
2189
2190 tfe8096p_dib0090_config.reset = st->dib8000_ops.tuner_sleep;
2191 tfe8096p_dib0090_config.sleep = st->dib8000_ops.tuner_sleep;
2192 tfe8096p_dib0090_config.wbd = dib8096p_wbd_table;
2193
2194 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
2195 &tfe8096p_dib0090_config) == NULL)
2196 return -ENODEV;
2197
2198 st->dib8000_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2199
2200 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
2201 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
2202 return 0;
2203 }
2204
2205 /* STK9090M */
2206 static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
2207 {
2208 return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
2209 }
2210
2211 static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
2212 {
2213 return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
2214 }
2215
2216 static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
2217 {
2218 return dib9000_set_gpio(fe, 5, 0, !onoff);
2219 }
2220
2221 static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
2222 {
2223 return dib9000_set_gpio(fe, 0, 0, onoff);
2224 }
2225
2226 static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
2227 {
2228 u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
2229 u8 rb[2];
2230 struct i2c_msg msg[2] = {
2231 {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
2232 {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
2233 };
2234 u8 index_data;
2235
2236 dibx000_i2c_set_speed(i2c, 250);
2237
2238 if (i2c_transfer(i2c, msg, 2) != 2)
2239 return -EIO;
2240
2241 switch (rb[0] << 8 | rb[1]) {
2242 case 0:
2243 deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
2244 return -EIO;
2245 case 1:
2246 deb_info("Found DiB0170 rev2");
2247 break;
2248 case 2:
2249 deb_info("Found DiB0190 rev2");
2250 break;
2251 default:
2252 deb_info("DiB01x0 not found");
2253 return -EIO;
2254 }
2255
2256 for (index_data = 0; index_data < len; index_data += 2) {
2257 wb[2] = (data[index_data + 1] >> 8) & 0xff;
2258 wb[3] = (data[index_data + 1]) & 0xff;
2259
2260 if (data[index_data] == 0) {
2261 wb[0] = (data[index_data] >> 8) & 0xff;
2262 wb[1] = (data[index_data]) & 0xff;
2263 msg[0].len = 2;
2264 if (i2c_transfer(i2c, msg, 2) != 2)
2265 return -EIO;
2266 wb[2] |= rb[0];
2267 wb[3] |= rb[1] & ~(3 << 4);
2268 }
2269
2270 wb[0] = (data[index_data] >> 8)&0xff;
2271 wb[1] = (data[index_data])&0xff;
2272 msg[0].len = 4;
2273 if (i2c_transfer(i2c, &msg[0], 1) != 1)
2274 return -EIO;
2275 }
2276 return 0;
2277 }
2278
2279 static struct dib9000_config stk9090m_config = {
2280 .output_mpeg2_in_188_bytes = 1,
2281 .output_mode = OUTMODE_MPEG2_FIFO,
2282 .vcxo_timer = 279620,
2283 .timing_frequency = 20452225,
2284 .demod_clock_khz = 60000,
2285 .xtal_clock_khz = 30000,
2286 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2287 .subband = {
2288 2,
2289 {
2290 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
2291 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
2292 { 0 },
2293 },
2294 },
2295 .gpio_function = {
2296 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
2297 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
2298 },
2299 };
2300
2301 static struct dib9000_config nim9090md_config[2] = {
2302 {
2303 .output_mpeg2_in_188_bytes = 1,
2304 .output_mode = OUTMODE_MPEG2_FIFO,
2305 .vcxo_timer = 279620,
2306 .timing_frequency = 20452225,
2307 .demod_clock_khz = 60000,
2308 .xtal_clock_khz = 30000,
2309 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2310 }, {
2311 .output_mpeg2_in_188_bytes = 1,
2312 .output_mode = OUTMODE_DIVERSITY,
2313 .vcxo_timer = 279620,
2314 .timing_frequency = 20452225,
2315 .demod_clock_khz = 60000,
2316 .xtal_clock_khz = 30000,
2317 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2318 .subband = {
2319 2,
2320 {
2321 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
2322 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
2323 { 0 },
2324 },
2325 },
2326 .gpio_function = {
2327 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
2328 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
2329 },
2330 }
2331 };
2332
2333 static struct dib0090_config dib9090_dib0090_config = {
2334 .io.pll_bypass = 0,
2335 .io.pll_range = 1,
2336 .io.pll_prediv = 1,
2337 .io.pll_loopdiv = 8,
2338 .io.adc_clock_ratio = 8,
2339 .io.pll_int_loop_filt = 0,
2340 .io.clock_khz = 30000,
2341 .reset = dib90x0_tuner_reset,
2342 .sleep = dib90x0_tuner_sleep,
2343 .clkouttobamse = 0,
2344 .analog_output = 0,
2345 .use_pwm_agc = 0,
2346 .clkoutdrive = 0,
2347 .freq_offset_khz_uhf = 0,
2348 .freq_offset_khz_vhf = 0,
2349 };
2350
2351 static struct dib0090_config nim9090md_dib0090_config[2] = {
2352 {
2353 .io.pll_bypass = 0,
2354 .io.pll_range = 1,
2355 .io.pll_prediv = 1,
2356 .io.pll_loopdiv = 8,
2357 .io.adc_clock_ratio = 8,
2358 .io.pll_int_loop_filt = 0,
2359 .io.clock_khz = 30000,
2360 .reset = dib90x0_tuner_reset,
2361 .sleep = dib90x0_tuner_sleep,
2362 .clkouttobamse = 1,
2363 .analog_output = 0,
2364 .use_pwm_agc = 0,
2365 .clkoutdrive = 0,
2366 .freq_offset_khz_uhf = 0,
2367 .freq_offset_khz_vhf = 0,
2368 }, {
2369 .io.pll_bypass = 0,
2370 .io.pll_range = 1,
2371 .io.pll_prediv = 1,
2372 .io.pll_loopdiv = 8,
2373 .io.adc_clock_ratio = 8,
2374 .io.pll_int_loop_filt = 0,
2375 .io.clock_khz = 30000,
2376 .reset = dib90x0_tuner_reset,
2377 .sleep = dib90x0_tuner_sleep,
2378 .clkouttobamse = 0,
2379 .analog_output = 0,
2380 .use_pwm_agc = 0,
2381 .clkoutdrive = 0,
2382 .freq_offset_khz_uhf = 0,
2383 .freq_offset_khz_vhf = 0,
2384 }
2385 };
2386
2387
2388 static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
2389 {
2390 struct dib0700_adapter_state *state = adap->priv;
2391 struct dib0700_state *st = adap->dev->priv;
2392 u32 fw_version;
2393
2394 /* Make use of the new i2c functions from FW 1.20 */
2395 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2396 if (fw_version >= 0x10200)
2397 st->fw_use_new_i2c_api = 1;
2398 dib0700_set_i2c_speed(adap->dev, 340);
2399
2400 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2401 msleep(20);
2402 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2403 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2404 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2405 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2406
2407 dib0700_ctrl_clock(adap->dev, 72, 1);
2408
2409 msleep(20);
2410 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2411 msleep(20);
2412 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2413
2414 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
2415
2416 if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
2417 deb_info("%s: Upload failed. (file not found?)\n", __func__);
2418 return -ENODEV;
2419 } else {
2420 deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size);
2421 }
2422 stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
2423 stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
2424
2425 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
2426
2427 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2428 }
2429
2430 static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
2431 {
2432 struct dib0700_adapter_state *state = adap->priv;
2433 struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
2434 u16 data_dib190[10] = {
2435 1, 0x1374,
2436 2, 0x01a2,
2437 7, 0x0020,
2438 0, 0x00ef,
2439 8, 0x0486,
2440 };
2441
2442 if (!IS_ENABLED(CONFIG_DVB_DIB9000))
2443 return -ENODEV;
2444 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
2445 return -ENODEV;
2446 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
2447 if (!i2c)
2448 return -ENODEV;
2449 if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
2450 return -ENODEV;
2451 dib0700_set_i2c_speed(adap->dev, 1500);
2452 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
2453 return -ENODEV;
2454 release_firmware(state->frontend_firmware);
2455 return 0;
2456 }
2457
2458 static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
2459 {
2460 struct dib0700_adapter_state *state = adap->priv;
2461 struct dib0700_state *st = adap->dev->priv;
2462 struct i2c_adapter *i2c;
2463 struct dvb_frontend *fe_slave;
2464 u32 fw_version;
2465
2466 /* Make use of the new i2c functions from FW 1.20 */
2467 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2468 if (fw_version >= 0x10200)
2469 st->fw_use_new_i2c_api = 1;
2470 dib0700_set_i2c_speed(adap->dev, 340);
2471
2472 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2473 msleep(20);
2474 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2475 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2476 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2477 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2478
2479 dib0700_ctrl_clock(adap->dev, 72, 1);
2480
2481 msleep(20);
2482 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2483 msleep(20);
2484 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2485
2486 if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
2487 deb_info("%s: Upload failed. (file not found?)\n", __func__);
2488 return -EIO;
2489 } else {
2490 deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size);
2491 }
2492 nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
2493 nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
2494 nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
2495 nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
2496
2497 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
2498 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
2499
2500 if (adap->fe_adap[0].fe == NULL)
2501 return -ENODEV;
2502
2503 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
2504 dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
2505
2506 fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
2507 dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
2508
2509 return fe_slave == NULL ? -ENODEV : 0;
2510 }
2511
2512 static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
2513 {
2514 struct dib0700_adapter_state *state = adap->priv;
2515 struct i2c_adapter *i2c;
2516 struct dvb_frontend *fe_slave;
2517 u16 data_dib190[10] = {
2518 1, 0x5374,
2519 2, 0x01ae,
2520 7, 0x0020,
2521 0, 0x00ef,
2522 8, 0x0406,
2523 };
2524 if (!IS_ENABLED(CONFIG_DVB_DIB9000))
2525 return -ENODEV;
2526 i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
2527 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
2528 return -ENODEV;
2529 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
2530 if (!i2c)
2531 return -ENODEV;
2532 if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
2533 return -ENODEV;
2534
2535 dib0700_set_i2c_speed(adap->dev, 1500);
2536 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
2537 return -ENODEV;
2538
2539 fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
2540 if (fe_slave != NULL) {
2541 i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
2542 dib9000_set_i2c_adapter(fe_slave, i2c);
2543
2544 i2c = dib9000_get_tuner_interface(fe_slave);
2545 if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
2546 return -ENODEV;
2547 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
2548 dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
2549 if (dib9000_firmware_post_pll_init(fe_slave) < 0)
2550 return -ENODEV;
2551 }
2552 release_firmware(state->frontend_firmware);
2553
2554 return 0;
2555 }
2556
2557 /* NIM7090 */
2558 static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc)
2559 {
2560 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
2561
2562 u16 xtal = 12000;
2563 u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */
2564 u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
2565 u32 fdem_max = 76000;
2566 u32 fdem_min = 69500;
2567 u32 fcp = 0, fs = 0, fdem = 0;
2568 u32 harmonic_id = 0;
2569
2570 adc->pll_loopdiv = loopdiv;
2571 adc->pll_prediv = prediv;
2572 adc->timf = 0;
2573
2574 deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
2575
2576 /* Find Min and Max prediv */
2577 while ((xtal/max_prediv) >= fcp_min)
2578 max_prediv++;
2579
2580 max_prediv--;
2581 min_prediv = max_prediv;
2582 while ((xtal/min_prediv) <= fcp_max) {
2583 min_prediv--;
2584 if (min_prediv == 1)
2585 break;
2586 }
2587 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2588
2589 min_prediv = 2;
2590
2591 for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
2592 fcp = xtal / prediv;
2593 if (fcp > fcp_min && fcp < fcp_max) {
2594 for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
2595 fdem = ((xtal/prediv) * loopdiv);
2596 fs = fdem / 4;
2597 /* test min/max system restrictions */
2598
2599 if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
2600 spur = 0;
2601 /* test fs harmonics positions */
2602 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
2603 if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
2604 spur = 1;
2605 break;
2606 }
2607 }
2608
2609 if (!spur) {
2610 adc->pll_loopdiv = loopdiv;
2611 adc->pll_prediv = prediv;
2612 adc->timf = 2396745143UL/fdem*(1 << 9);
2613 adc->timf += ((2396745143UL%fdem) << 9)/fdem;
2614 deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
2615 break;
2616 }
2617 }
2618 }
2619 }
2620 if (!spur)
2621 break;
2622 }
2623
2624
2625 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2626 return -EINVAL;
2627 else
2628 return 0;
2629 }
2630
2631 static int dib7090_agc_startup(struct dvb_frontend *fe)
2632 {
2633 struct dvb_usb_adapter *adap = fe->dvb->priv;
2634 struct dib0700_adapter_state *state = adap->priv;
2635 struct dibx000_bandwidth_config pll;
2636 u16 target;
2637 struct dibx090p_best_adc adc;
2638 int ret;
2639
2640 ret = state->set_param_save(fe);
2641 if (ret < 0)
2642 return ret;
2643
2644 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2645 dib0090_pwm_gain_reset(fe);
2646 target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
2647 state->dib7000p_ops.set_wbd_ref(fe, target);
2648
2649 if (dib7090p_get_best_sampling(fe, &adc) == 0) {
2650 pll.pll_ratio = adc.pll_loopdiv;
2651 pll.pll_prediv = adc.pll_prediv;
2652
2653 state->dib7000p_ops.update_pll(fe, &pll);
2654 state->dib7000p_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2655 }
2656 return 0;
2657 }
2658
2659 static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
2660 {
2661 deb_info("AGC restart callback: %d", restart);
2662 if (restart == 0) /* before AGC startup */
2663 dib0090_set_dc_servo(fe, 1);
2664 return 0;
2665 }
2666
2667 static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global)
2668 {
2669 struct dvb_usb_adapter *adap = fe->dvb->priv;
2670 struct dib0700_adapter_state *state = adap->priv;
2671
2672 deb_info("update LNA: agc global=%i", agc_global);
2673
2674 if (agc_global < 25000) {
2675 state->dib7000p_ops.set_gpio(fe, 8, 0, 0);
2676 state->dib7000p_ops.set_agc1_min(fe, 0);
2677 } else {
2678 state->dib7000p_ops.set_gpio(fe, 8, 0, 1);
2679 state->dib7000p_ops.set_agc1_min(fe, 32768);
2680 }
2681
2682 return 0;
2683 }
2684
2685 static struct dib0090_wbd_slope dib7090_wbd_table[] = {
2686 { 380, 81, 850, 64, 540, 4},
2687 { 860, 51, 866, 21, 375, 4},
2688 {1700, 0, 250, 0, 100, 6},
2689 {2600, 0, 250, 0, 100, 6},
2690 { 0xFFFF, 0, 0, 0, 0, 0},
2691 };
2692
2693 static struct dibx000_agc_config dib7090_agc_config[2] = {
2694 {
2695 .band_caps = BAND_UHF,
2696 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2697 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2698 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2699
2700 .inv_gain = 687,
2701 .time_stabiliz = 10,
2702
2703 .alpha_level = 0,
2704 .thlock = 118,
2705
2706 .wbd_inv = 0,
2707 .wbd_ref = 1200,
2708 .wbd_sel = 3,
2709 .wbd_alpha = 5,
2710
2711 .agc1_max = 65535,
2712 .agc1_min = 32768,
2713
2714 .agc2_max = 65535,
2715 .agc2_min = 0,
2716
2717 .agc1_pt1 = 0,
2718 .agc1_pt2 = 32,
2719 .agc1_pt3 = 114,
2720 .agc1_slope1 = 143,
2721 .agc1_slope2 = 144,
2722 .agc2_pt1 = 114,
2723 .agc2_pt2 = 227,
2724 .agc2_slope1 = 116,
2725 .agc2_slope2 = 117,
2726
2727 .alpha_mant = 18,
2728 .alpha_exp = 0,
2729 .beta_mant = 20,
2730 .beta_exp = 59,
2731
2732 .perform_agc_softsplit = 0,
2733 } , {
2734 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
2735 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2736 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2737 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2738
2739 .inv_gain = 732,
2740 .time_stabiliz = 10,
2741
2742 .alpha_level = 0,
2743 .thlock = 118,
2744
2745 .wbd_inv = 0,
2746 .wbd_ref = 1200,
2747 .wbd_sel = 3,
2748 .wbd_alpha = 5,
2749
2750 .agc1_max = 65535,
2751 .agc1_min = 0,
2752
2753 .agc2_max = 65535,
2754 .agc2_min = 0,
2755
2756 .agc1_pt1 = 0,
2757 .agc1_pt2 = 0,
2758 .agc1_pt3 = 98,
2759 .agc1_slope1 = 0,
2760 .agc1_slope2 = 167,
2761 .agc2_pt1 = 98,
2762 .agc2_pt2 = 255,
2763 .agc2_slope1 = 104,
2764 .agc2_slope2 = 0,
2765
2766 .alpha_mant = 18,
2767 .alpha_exp = 0,
2768 .beta_mant = 20,
2769 .beta_exp = 59,
2770
2771 .perform_agc_softsplit = 0,
2772 }
2773 };
2774
2775 static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
2776 .internal = 60000,
2777 .sampling = 15000,
2778 .pll_prediv = 1,
2779 .pll_ratio = 5,
2780 .pll_range = 0,
2781 .pll_reset = 0,
2782 .pll_bypass = 0,
2783 .enable_refdiv = 0,
2784 .bypclk_div = 0,
2785 .IO_CLK_en_core = 1,
2786 .ADClkSrc = 1,
2787 .modulo = 2,
2788 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
2789 .ifreq = (0 << 25) | 0,
2790 .timf = 20452225,
2791 .xtal_hz = 15000000,
2792 };
2793
2794 static struct dib7000p_config nim7090_dib7000p_config = {
2795 .output_mpeg2_in_188_bytes = 1,
2796 .hostbus_diversity = 1,
2797 .tuner_is_baseband = 1,
2798 .update_lna = tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */
2799
2800 .agc_config_count = 2,
2801 .agc = dib7090_agc_config,
2802
2803 .bw = &dib7090_clock_config_12_mhz,
2804
2805 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2806 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2807 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2808
2809 .pwm_freq_div = 0,
2810
2811 .agc_control = dib7090_agc_restart,
2812
2813 .spur_protect = 0,
2814 .disable_sample_and_hold = 0,
2815 .enable_current_mirror = 0,
2816 .diversity_delay = 0,
2817
2818 .output_mode = OUTMODE_MPEG2_FIFO,
2819 .enMpegOutput = 1,
2820 };
2821
2822 static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global)
2823 {
2824 struct dvb_usb_adapter *adap = fe->dvb->priv;
2825 struct dib0700_adapter_state *state = adap->priv;
2826
2827 deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global);
2828 if (agc_global < 25000) {
2829 state->dib7000p_ops.set_gpio(fe, 5, 0, 0);
2830 state->dib7000p_ops.set_agc1_min(fe, 0);
2831 } else {
2832 state->dib7000p_ops.set_gpio(fe, 5, 0, 1);
2833 state->dib7000p_ops.set_agc1_min(fe, 32768);
2834 }
2835
2836 return 0;
2837 }
2838
2839 static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
2840 {
2841 .output_mpeg2_in_188_bytes = 1,
2842 .hostbus_diversity = 1,
2843 .tuner_is_baseband = 1,
2844 .update_lna = tfe7090p_pvr_update_lna,
2845
2846 .agc_config_count = 2,
2847 .agc = dib7090_agc_config,
2848
2849 .bw = &dib7090_clock_config_12_mhz,
2850
2851 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2852 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2853 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2854
2855 .pwm_freq_div = 0,
2856
2857 .agc_control = dib7090_agc_restart,
2858
2859 .spur_protect = 0,
2860 .disable_sample_and_hold = 0,
2861 .enable_current_mirror = 0,
2862 .diversity_delay = 0,
2863
2864 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2865 .default_i2c_addr = 0x90,
2866 .enMpegOutput = 1,
2867 }, {
2868 .output_mpeg2_in_188_bytes = 1,
2869 .hostbus_diversity = 1,
2870 .tuner_is_baseband = 1,
2871 .update_lna = tfe7090p_pvr_update_lna,
2872
2873 .agc_config_count = 2,
2874 .agc = dib7090_agc_config,
2875
2876 .bw = &dib7090_clock_config_12_mhz,
2877
2878 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2879 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2880 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2881
2882 .pwm_freq_div = 0,
2883
2884 .agc_control = dib7090_agc_restart,
2885
2886 .spur_protect = 0,
2887 .disable_sample_and_hold = 0,
2888 .enable_current_mirror = 0,
2889 .diversity_delay = 0,
2890
2891 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2892 .default_i2c_addr = 0x92,
2893 .enMpegOutput = 0,
2894 }
2895 };
2896
2897 static struct dib0090_config nim7090_dib0090_config = {
2898 .io.clock_khz = 12000,
2899 .io.pll_bypass = 0,
2900 .io.pll_range = 0,
2901 .io.pll_prediv = 3,
2902 .io.pll_loopdiv = 6,
2903 .io.adc_clock_ratio = 0,
2904 .io.pll_int_loop_filt = 0,
2905
2906 .freq_offset_khz_uhf = 0,
2907 .freq_offset_khz_vhf = 0,
2908
2909 .clkouttobamse = 1,
2910 .analog_output = 0,
2911
2912 .wbd_vhf_offset = 0,
2913 .wbd_cband_offset = 0,
2914 .use_pwm_agc = 1,
2915 .clkoutdrive = 0,
2916
2917 .fref_clock_ratio = 0,
2918
2919 .wbd = dib7090_wbd_table,
2920
2921 .ls_cfg_pad_drv = 0,
2922 .data_tx_drv = 0,
2923 .low_if = NULL,
2924 .in_soc = 1,
2925 };
2926
2927 static struct dib7000p_config tfe7790p_dib7000p_config = {
2928 .output_mpeg2_in_188_bytes = 1,
2929 .hostbus_diversity = 1,
2930 .tuner_is_baseband = 1,
2931 .update_lna = tfe7790p_update_lna,
2932
2933 .agc_config_count = 2,
2934 .agc = dib7090_agc_config,
2935
2936 .bw = &dib7090_clock_config_12_mhz,
2937
2938 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2939 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2940 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2941
2942 .pwm_freq_div = 0,
2943
2944 .agc_control = dib7090_agc_restart,
2945
2946 .spur_protect = 0,
2947 .disable_sample_and_hold = 0,
2948 .enable_current_mirror = 0,
2949 .diversity_delay = 0,
2950
2951 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2952 .enMpegOutput = 1,
2953 };
2954
2955 static struct dib0090_config tfe7790p_dib0090_config = {
2956 .io.clock_khz = 12000,
2957 .io.pll_bypass = 0,
2958 .io.pll_range = 0,
2959 .io.pll_prediv = 3,
2960 .io.pll_loopdiv = 6,
2961 .io.adc_clock_ratio = 0,
2962 .io.pll_int_loop_filt = 0,
2963
2964 .freq_offset_khz_uhf = 0,
2965 .freq_offset_khz_vhf = 0,
2966
2967 .clkouttobamse = 1,
2968 .analog_output = 0,
2969
2970 .wbd_vhf_offset = 0,
2971 .wbd_cband_offset = 0,
2972 .use_pwm_agc = 1,
2973 .clkoutdrive = 0,
2974
2975 .fref_clock_ratio = 0,
2976
2977 .wbd = dib7090_wbd_table,
2978
2979 .ls_cfg_pad_drv = 0,
2980 .data_tx_drv = 0,
2981 .low_if = NULL,
2982 .in_soc = 1,
2983 .force_cband_input = 0,
2984 .is_dib7090e = 0,
2985 .force_crystal_mode = 1,
2986 };
2987
2988 static struct dib0090_config tfe7090pvr_dib0090_config[2] = {
2989 {
2990 .io.clock_khz = 12000,
2991 .io.pll_bypass = 0,
2992 .io.pll_range = 0,
2993 .io.pll_prediv = 3,
2994 .io.pll_loopdiv = 6,
2995 .io.adc_clock_ratio = 0,
2996 .io.pll_int_loop_filt = 0,
2997
2998 .freq_offset_khz_uhf = 50,
2999 .freq_offset_khz_vhf = 70,
3000
3001 .clkouttobamse = 1,
3002 .analog_output = 0,
3003
3004 .wbd_vhf_offset = 0,
3005 .wbd_cband_offset = 0,
3006 .use_pwm_agc = 1,
3007 .clkoutdrive = 0,
3008
3009 .fref_clock_ratio = 0,
3010
3011 .wbd = dib7090_wbd_table,
3012
3013 .ls_cfg_pad_drv = 0,
3014 .data_tx_drv = 0,
3015 .low_if = NULL,
3016 .in_soc = 1,
3017 }, {
3018 .io.clock_khz = 12000,
3019 .io.pll_bypass = 0,
3020 .io.pll_range = 0,
3021 .io.pll_prediv = 3,
3022 .io.pll_loopdiv = 6,
3023 .io.adc_clock_ratio = 0,
3024 .io.pll_int_loop_filt = 0,
3025
3026 .freq_offset_khz_uhf = -50,
3027 .freq_offset_khz_vhf = -70,
3028
3029 .clkouttobamse = 1,
3030 .analog_output = 0,
3031
3032 .wbd_vhf_offset = 0,
3033 .wbd_cband_offset = 0,
3034 .use_pwm_agc = 1,
3035 .clkoutdrive = 0,
3036
3037 .fref_clock_ratio = 0,
3038
3039 .wbd = dib7090_wbd_table,
3040
3041 .ls_cfg_pad_drv = 0,
3042 .data_tx_drv = 0,
3043 .low_if = NULL,
3044 .in_soc = 1,
3045 }
3046 };
3047
3048 static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
3049 {
3050 struct dib0700_adapter_state *state = adap->priv;
3051
3052 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3053 return -ENODEV;
3054
3055 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3056 msleep(20);
3057 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3058 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3059 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3060 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3061
3062 msleep(20);
3063 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3064 msleep(20);
3065 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3066
3067 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
3068 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3069 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3070 return -ENODEV;
3071 }
3072 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
3073
3074 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3075 }
3076
3077 static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
3078 {
3079 struct dib0700_adapter_state *st = adap->priv;
3080 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3081
3082 nim7090_dib0090_config.reset = st->dib7000p_ops.tuner_sleep,
3083 nim7090_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep,
3084 nim7090_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
3085
3086 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
3087 return -ENODEV;
3088
3089 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3090
3091 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3092 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3093 return 0;
3094 }
3095
3096 static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
3097 {
3098 struct dib0700_state *st = adap->dev->priv;
3099 struct dib0700_adapter_state *state = adap->priv;
3100
3101 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3102 return -ENODEV;
3103
3104 /* The TFE7090 requires the dib0700 to not be in master mode */
3105 st->disable_streaming_master_mode = 1;
3106
3107 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3108 msleep(20);
3109 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3110 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3111 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3112 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3113
3114 msleep(20);
3115 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3116 msleep(20);
3117 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3118
3119 /* initialize IC 0 */
3120 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
3121 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3122 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3123 return -ENODEV;
3124 }
3125
3126 dib0700_set_i2c_speed(adap->dev, 340);
3127 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
3128 if (adap->fe_adap[0].fe == NULL)
3129 return -ENODEV;
3130
3131 state->dib7000p_ops.slave_reset(adap->fe_adap[0].fe);
3132
3133 return 0;
3134 }
3135
3136 static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
3137 {
3138 struct i2c_adapter *i2c;
3139 struct dib0700_adapter_state *state = adap->priv;
3140
3141 if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
3142 err("the master dib7090 has to be initialized first");
3143 return -ENODEV; /* the master device has not been initialized */
3144 }
3145
3146 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3147 return -ENODEV;
3148
3149 i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
3150 if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
3151 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3152 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3153 return -ENODEV;
3154 }
3155
3156 adap->fe_adap[0].fe = state->dib7000p_ops.init(i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
3157 dib0700_set_i2c_speed(adap->dev, 200);
3158
3159 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3160 }
3161
3162 static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
3163 {
3164 struct dib0700_adapter_state *st = adap->priv;
3165 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3166
3167 tfe7090pvr_dib0090_config[0].reset = st->dib7000p_ops.tuner_sleep;
3168 tfe7090pvr_dib0090_config[0].sleep = st->dib7000p_ops.tuner_sleep;
3169 tfe7090pvr_dib0090_config[0].get_adc_power = st->dib7000p_ops.get_adc_power;
3170
3171 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
3172 return -ENODEV;
3173
3174 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3175
3176 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3177 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3178 return 0;
3179 }
3180
3181 static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
3182 {
3183 struct dib0700_adapter_state *st = adap->priv;
3184 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3185
3186 tfe7090pvr_dib0090_config[1].reset = st->dib7000p_ops.tuner_sleep;
3187 tfe7090pvr_dib0090_config[1].sleep = st->dib7000p_ops.tuner_sleep;
3188 tfe7090pvr_dib0090_config[1].get_adc_power = st->dib7000p_ops.get_adc_power;
3189
3190 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
3191 return -ENODEV;
3192
3193 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3194
3195 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3196 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3197 return 0;
3198 }
3199
3200 static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap)
3201 {
3202 struct dib0700_state *st = adap->dev->priv;
3203 struct dib0700_adapter_state *state = adap->priv;
3204
3205 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3206 return -ENODEV;
3207
3208 /* The TFE7790P requires the dib0700 to not be in master mode */
3209 st->disable_streaming_master_mode = 1;
3210
3211 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3212 msleep(20);
3213 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3214 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3215 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3216 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3217 msleep(20);
3218 dib0700_ctrl_clock(adap->dev, 72, 1);
3219 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3220 msleep(20);
3221 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3222
3223 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap,
3224 1, 0x10, &tfe7790p_dib7000p_config) != 0) {
3225 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3226 __func__);
3227 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3228 return -ENODEV;
3229 }
3230 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
3231 0x80, &tfe7790p_dib7000p_config);
3232
3233 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3234 }
3235
3236 static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap)
3237 {
3238 struct dib0700_adapter_state *st = adap->priv;
3239 struct i2c_adapter *tun_i2c =
3240 st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3241
3242
3243 tfe7790p_dib0090_config.reset = st->dib7000p_ops.tuner_sleep;
3244 tfe7790p_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep;
3245 tfe7790p_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
3246
3247 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
3248 &tfe7790p_dib0090_config) == NULL)
3249 return -ENODEV;
3250
3251 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3252
3253 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3254 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3255 return 0;
3256 }
3257
3258 /* STK7070PD */
3259 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
3260 {
3261 .output_mpeg2_in_188_bytes = 1,
3262
3263 .agc_config_count = 1,
3264 .agc = &dib7070_agc_config,
3265 .bw = &dib7070_bw_config_12_mhz,
3266 .tuner_is_baseband = 1,
3267 .spur_protect = 1,
3268
3269 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
3270 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
3271 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
3272
3273 .hostbus_diversity = 1,
3274 }, {
3275 .output_mpeg2_in_188_bytes = 1,
3276
3277 .agc_config_count = 1,
3278 .agc = &dib7070_agc_config,
3279 .bw = &dib7070_bw_config_12_mhz,
3280 .tuner_is_baseband = 1,
3281 .spur_protect = 1,
3282
3283 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
3284 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
3285 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
3286
3287 .hostbus_diversity = 1,
3288 }
3289 };
3290
3291 static void stk7070pd_init(struct dvb_usb_device *dev)
3292 {
3293 dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
3294 msleep(10);
3295 dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
3296 dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
3297 dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
3298 dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
3299
3300 dib0700_ctrl_clock(dev, 72, 1);
3301
3302 msleep(10);
3303 dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
3304 }
3305
3306 static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
3307 {
3308 struct dib0700_adapter_state *state = adap->priv;
3309
3310 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3311 return -ENODEV;
3312
3313 stk7070pd_init(adap->dev);
3314
3315 msleep(10);
3316 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3317
3318 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
3319 stk7070pd_dib7000p_config) != 0) {
3320 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3321 __func__);
3322 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3323 return -ENODEV;
3324 }
3325
3326 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
3327 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3328 }
3329
3330 static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
3331 {
3332 struct dib0700_adapter_state *state = adap->priv;
3333
3334 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3335 return -ENODEV;
3336
3337 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
3338 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3339 }
3340
3341 static int novatd_read_status_override(struct dvb_frontend *fe,
3342 enum fe_status *stat)
3343 {
3344 struct dvb_usb_adapter *adap = fe->dvb->priv;
3345 struct dvb_usb_device *dev = adap->dev;
3346 struct dib0700_state *state = dev->priv;
3347 int ret;
3348
3349 ret = state->read_status(fe, stat);
3350
3351 if (!ret)
3352 dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
3353 !!(*stat & FE_HAS_LOCK));
3354
3355 return ret;
3356 }
3357
3358 static int novatd_sleep_override(struct dvb_frontend* fe)
3359 {
3360 struct dvb_usb_adapter *adap = fe->dvb->priv;
3361 struct dvb_usb_device *dev = adap->dev;
3362 struct dib0700_state *state = dev->priv;
3363
3364 /* turn off LED */
3365 dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
3366
3367 return state->sleep(fe);
3368 }
3369
3370 /*
3371 * novatd_frontend_attach - Nova-TD specific attach
3372 *
3373 * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
3374 * information purposes.
3375 */
3376 static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
3377 {
3378 struct dvb_usb_device *dev = adap->dev;
3379 struct dib0700_state *st = dev->priv;
3380 struct dib0700_adapter_state *state = adap->priv;
3381
3382 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3383 return -ENODEV;
3384
3385 if (adap->id == 0) {
3386 stk7070pd_init(dev);
3387
3388 /* turn the power LED on, the other two off (just in case) */
3389 dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
3390 dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
3391 dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
3392
3393 if (state->dib7000p_ops.i2c_enumeration(&dev->i2c_adap, 2, 18,
3394 stk7070pd_dib7000p_config) != 0) {
3395 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3396 __func__);
3397 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3398 return -ENODEV;
3399 }
3400 }
3401
3402 adap->fe_adap[0].fe = state->dib7000p_ops.init(&dev->i2c_adap,
3403 adap->id == 0 ? 0x80 : 0x82,
3404 &stk7070pd_dib7000p_config[adap->id]);
3405
3406 if (adap->fe_adap[0].fe == NULL)
3407 return -ENODEV;
3408
3409 st->read_status = adap->fe_adap[0].fe->ops.read_status;
3410 adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
3411 st->sleep = adap->fe_adap[0].fe->ops.sleep;
3412 adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
3413
3414 return 0;
3415 }
3416
3417 /* S5H1411 */
3418 static struct s5h1411_config pinnacle_801e_config = {
3419 .output_mode = S5H1411_PARALLEL_OUTPUT,
3420 .gpio = S5H1411_GPIO_OFF,
3421 .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINUOUS_NONINVERTING_CLOCK,
3422 .qam_if = S5H1411_IF_44000,
3423 .vsb_if = S5H1411_IF_44000,
3424 .inversion = S5H1411_INVERSION_OFF,
3425 .status_mode = S5H1411_DEMODLOCKING
3426 };
3427
3428 /* Pinnacle PCTV HD Pro 801e GPIOs map:
3429 GPIO0 - currently unknown
3430 GPIO1 - xc5000 tuner reset
3431 GPIO2 - CX25843 sleep
3432 GPIO3 - currently unknown
3433 GPIO4 - currently unknown
3434 GPIO6 - currently unknown
3435 GPIO7 - currently unknown
3436 GPIO9 - currently unknown
3437 GPIO10 - CX25843 reset
3438 */
3439 static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
3440 {
3441 struct dib0700_state *st = adap->dev->priv;
3442
3443 /* Make use of the new i2c functions from FW 1.20 */
3444 st->fw_use_new_i2c_api = 1;
3445
3446 /* The s5h1411 requires the dib0700 to not be in master mode */
3447 st->disable_streaming_master_mode = 1;
3448
3449 /* All msleep values taken from Windows USB trace */
3450 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
3451 dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
3452 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3453 msleep(400);
3454 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3455 msleep(60);
3456 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3457 msleep(30);
3458 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3459 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3460 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3461 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3462 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
3463 msleep(30);
3464
3465 /* Put the CX25843 to sleep for now since we're in digital mode */
3466 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
3467
3468 /* GPIOs are initialized, do the attach */
3469 adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
3470 &adap->dev->i2c_adap);
3471 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3472 }
3473
3474 static int dib0700_xc5000_tuner_callback(void *priv, int component,
3475 int command, int arg)
3476 {
3477 struct dvb_usb_adapter *adap = priv;
3478
3479 if (command == XC5000_TUNER_RESET) {
3480 /* Reset the tuner */
3481 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
3482 msleep(10);
3483 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
3484 msleep(10);
3485 } else {
3486 err("xc5000: unknown tuner callback command: %d\n", command);
3487 return -EINVAL;
3488 }
3489
3490 return 0;
3491 }
3492
3493 static struct xc5000_config s5h1411_xc5000_tunerconfig = {
3494 .i2c_address = 0x64,
3495 .if_khz = 5380,
3496 };
3497
3498 static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
3499 {
3500 /* FIXME: generalize & move to common area */
3501 adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
3502
3503 return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
3504 &s5h1411_xc5000_tunerconfig)
3505 == NULL ? -ENODEV : 0;
3506 }
3507
3508 static int dib0700_xc4000_tuner_callback(void *priv, int component,
3509 int command, int arg)
3510 {
3511 struct dvb_usb_adapter *adap = priv;
3512 struct dib0700_adapter_state *state = adap->priv;
3513
3514 if (command == XC4000_TUNER_RESET) {
3515 /* Reset the tuner */
3516 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
3517 msleep(10);
3518 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3519 } else {
3520 err("xc4000: unknown tuner callback command: %d\n", command);
3521 return -EINVAL;
3522 }
3523
3524 return 0;
3525 }
3526
3527 static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
3528 .band_caps = BAND_UHF | BAND_VHF,
3529 .setup = 0x64,
3530 .inv_gain = 0x02c8,
3531 .time_stabiliz = 0x15,
3532 .alpha_level = 0x00,
3533 .thlock = 0x76,
3534 .wbd_inv = 0x01,
3535 .wbd_ref = 0x0b33,
3536 .wbd_sel = 0x00,
3537 .wbd_alpha = 0x02,
3538 .agc1_max = 0x00,
3539 .agc1_min = 0x00,
3540 .agc2_max = 0x9b26,
3541 .agc2_min = 0x26ca,
3542 .agc1_pt1 = 0x00,
3543 .agc1_pt2 = 0x00,
3544 .agc1_pt3 = 0x00,
3545 .agc1_slope1 = 0x00,
3546 .agc1_slope2 = 0x00,
3547 .agc2_pt1 = 0x00,
3548 .agc2_pt2 = 0x80,
3549 .agc2_slope1 = 0x1d,
3550 .agc2_slope2 = 0x1d,
3551 .alpha_mant = 0x11,
3552 .alpha_exp = 0x1b,
3553 .beta_mant = 0x17,
3554 .beta_exp = 0x33,
3555 .perform_agc_softsplit = 0x00,
3556 };
3557
3558 static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
3559 .internal = 60000,
3560 .sampling = 30000,
3561 .pll_prediv = 1,
3562 .pll_ratio = 8,
3563 .pll_range = 3,
3564 .pll_reset = 1,
3565 .pll_bypass = 0,
3566 .enable_refdiv = 0,
3567 .bypclk_div = 0,
3568 .IO_CLK_en_core = 1,
3569 .ADClkSrc = 1,
3570 .modulo = 0,
3571 .sad_cfg = (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */
3572 .ifreq = 39370534,
3573 .timf = 20452225,
3574 .xtal_hz = 30000000
3575 };
3576
3577 /* FIXME: none of these inputs are validated yet */
3578 static struct dib7000p_config pctv_340e_config = {
3579 .output_mpeg2_in_188_bytes = 1,
3580
3581 .agc_config_count = 1,
3582 .agc = &stk7700p_7000p_xc4000_agc_config,
3583 .bw = &stk7700p_xc4000_pll_config,
3584
3585 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
3586 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
3587 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
3588 };
3589
3590 /* PCTV 340e GPIOs map:
3591 dib0700:
3592 GPIO2 - CX25843 sleep
3593 GPIO3 - CS5340 reset
3594 GPIO5 - IRD
3595 GPIO6 - Power Supply
3596 GPIO8 - LNA (1=off 0=on)
3597 GPIO10 - CX25843 reset
3598 dib7000:
3599 GPIO8 - xc4000 reset
3600 */
3601 static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
3602 {
3603 struct dib0700_state *st = adap->dev->priv;
3604 struct dib0700_adapter_state *state = adap->priv;
3605
3606 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3607 return -ENODEV;
3608
3609 /* Power Supply on */
3610 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3611 msleep(50);
3612 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3613 msleep(100); /* Allow power supply to settle before probing */
3614
3615 /* cx25843 reset */
3616 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3617 msleep(1); /* cx25843 datasheet say 350us required */
3618 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3619
3620 /* LNA off for now */
3621 dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1);
3622
3623 /* Put the CX25843 to sleep for now since we're in digital mode */
3624 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
3625
3626 /* FIXME: not verified yet */
3627 dib0700_ctrl_clock(adap->dev, 72, 1);
3628
3629 msleep(500);
3630
3631 if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
3632 /* Demodulator not found for some reason? */
3633 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3634 return -ENODEV;
3635 }
3636
3637 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x12,
3638 &pctv_340e_config);
3639 st->is_dib7000pc = 1;
3640
3641 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3642 }
3643
3644 static struct xc4000_config dib7000p_xc4000_tunerconfig = {
3645 .i2c_address = 0x61,
3646 .default_pm = 1,
3647 .dvb_amplitude = 0,
3648 .set_smoothedcvbs = 0,
3649 .if_khz = 5400
3650 };
3651
3652 static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
3653 {
3654 struct i2c_adapter *tun_i2c;
3655 struct dib0700_adapter_state *state = adap->priv;
3656
3657 /* The xc4000 is not on the main i2c bus */
3658 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
3659 DIBX000_I2C_INTERFACE_TUNER, 1);
3660 if (tun_i2c == NULL) {
3661 printk(KERN_ERR "Could not reach tuner i2c bus\n");
3662 return 0;
3663 }
3664
3665 /* Setup the reset callback */
3666 adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
3667
3668 return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
3669 &dib7000p_xc4000_tunerconfig)
3670 == NULL ? -ENODEV : 0;
3671 }
3672
3673 static struct lgdt3305_config hcw_lgdt3305_config = {
3674 .i2c_addr = 0x0e,
3675 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
3676 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
3677 .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
3678 .deny_i2c_rptr = 0,
3679 .spectral_inversion = 1,
3680 .qam_if_khz = 6000,
3681 .vsb_if_khz = 6000,
3682 .usref_8vsb = 0x0500,
3683 };
3684
3685 static struct mxl5007t_config hcw_mxl5007t_config = {
3686 .xtal_freq_hz = MxL_XTAL_25_MHZ,
3687 .if_freq_hz = MxL_IF_6_MHZ,
3688 .invert_if = 1,
3689 };
3690
3691 /* TIGER-ATSC map:
3692 GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
3693 GPIO1 - ANT_SEL (H: VPA, L: MCX)
3694 GPIO4 - SCL2
3695 GPIO6 - EN_TUNER
3696 GPIO7 - SDA2
3697 GPIO10 - DEM_RST
3698
3699 MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
3700 */
3701 static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
3702 {
3703 struct dib0700_state *st = adap->dev->priv;
3704
3705 /* Make use of the new i2c functions from FW 1.20 */
3706 st->fw_use_new_i2c_api = 1;
3707
3708 st->disable_streaming_master_mode = 1;
3709
3710 /* fe power enable */
3711 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3712 msleep(30);
3713 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3714 msleep(30);
3715
3716 /* demod reset */
3717 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3718 msleep(30);
3719 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3720 msleep(30);
3721 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3722 msleep(30);
3723
3724 adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
3725 &hcw_lgdt3305_config,
3726 &adap->dev->i2c_adap);
3727
3728 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3729 }
3730
3731 static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
3732 {
3733 return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
3734 &adap->dev->i2c_adap, 0x60,
3735 &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
3736 }
3737
3738 static int xbox_one_attach(struct dvb_usb_adapter *adap)
3739 {
3740 struct dib0700_state *st = adap->dev->priv;
3741 struct i2c_client *client_demod, *client_tuner;
3742 struct dvb_usb_device *d = adap->dev;
3743 struct mn88472_config mn88472_config = { };
3744 struct tda18250_config tda18250_config;
3745 struct i2c_board_info info;
3746
3747 st->fw_use_new_i2c_api = 1;
3748 st->disable_streaming_master_mode = 1;
3749
3750 /* fe power enable */
3751 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3752 msleep(30);
3753 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3754 msleep(30);
3755
3756 /* demod reset */
3757 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3758 msleep(30);
3759 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3760 msleep(30);
3761 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3762 msleep(30);
3763
3764 /* attach demod */
3765 mn88472_config.fe = &adap->fe_adap[0].fe;
3766 mn88472_config.i2c_wr_max = 22;
3767 mn88472_config.xtal = 20500000;
3768 mn88472_config.ts_mode = PARALLEL_TS_MODE;
3769 mn88472_config.ts_clock = FIXED_TS_CLOCK;
3770 memset(&info, 0, sizeof(struct i2c_board_info));
3771 strscpy(info.type, "mn88472", I2C_NAME_SIZE);
3772 info.addr = 0x18;
3773 info.platform_data = &mn88472_config;
3774 request_module(info.type);
3775 client_demod = i2c_new_client_device(&d->i2c_adap, &info);
3776 if (!i2c_client_has_driver(client_demod))
3777 goto fail_demod_device;
3778 if (!try_module_get(client_demod->dev.driver->owner))
3779 goto fail_demod_module;
3780
3781 st->i2c_client_demod = client_demod;
3782
3783 adap->fe_adap[0].fe = mn88472_config.get_dvb_frontend(client_demod);
3784
3785 /* attach tuner */
3786 memset(&tda18250_config, 0, sizeof(tda18250_config));
3787 tda18250_config.if_dvbt_6 = 3950;
3788 tda18250_config.if_dvbt_7 = 4450;
3789 tda18250_config.if_dvbt_8 = 4950;
3790 tda18250_config.if_dvbc_6 = 4950;
3791 tda18250_config.if_dvbc_8 = 4950;
3792 tda18250_config.if_atsc = 4079;
3793 tda18250_config.loopthrough = true;
3794 tda18250_config.xtal_freq = TDA18250_XTAL_FREQ_27MHZ;
3795 tda18250_config.fe = adap->fe_adap[0].fe;
3796
3797 memset(&info, 0, sizeof(struct i2c_board_info));
3798 strscpy(info.type, "tda18250", I2C_NAME_SIZE);
3799 info.addr = 0x60;
3800 info.platform_data = &tda18250_config;
3801
3802 request_module(info.type);
3803 client_tuner = i2c_new_client_device(&adap->dev->i2c_adap, &info);
3804 if (!i2c_client_has_driver(client_tuner))
3805 goto fail_tuner_device;
3806 if (!try_module_get(client_tuner->dev.driver->owner))
3807 goto fail_tuner_module;
3808
3809 st->i2c_client_tuner = client_tuner;
3810 return 0;
3811
3812 fail_tuner_module:
3813 i2c_unregister_device(client_tuner);
3814 fail_tuner_device:
3815 module_put(client_demod->dev.driver->owner);
3816 fail_demod_module:
3817 i2c_unregister_device(client_demod);
3818 fail_demod_device:
3819 return -ENODEV;
3820 }
3821
3822
3823 /* DVB-USB and USB stuff follows */
3824 struct usb_device_id dib0700_usb_id_table[] = {
3825 /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
3826 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
3827 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
3828 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
3829 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
3830 /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
3831 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
3832 { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
3833 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
3834 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
3835 /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
3836 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
3837 { USB_DEVICE(USB_VID_TERRATEC,
3838 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
3839 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
3840 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
3841 /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
3842 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
3843 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
3844 { USB_DEVICE(USB_VID_PINNACLE,
3845 USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
3846 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
3847 /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
3848 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
3849 { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
3850 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
3851 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
3852 /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
3853 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
3854 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
3855 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
3856 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
3857 /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
3858 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
3859 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
3860 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
3861 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
3862 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
3863 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
3864 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
3865 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
3866 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
3867 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
3868 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
3869 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
3870 { USB_DEVICE(USB_VID_TERRATEC,
3871 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
3872 { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
3873 /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
3874 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
3875 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
3876 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
3877 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
3878 /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
3879 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
3880 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
3881 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
3882 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
3883 /* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
3884 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
3885 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
3886 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
3887 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
3888 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
3889 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
3890 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
3891 { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
3892 { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
3893 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
3894 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
3895 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
3896 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
3897 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) },
3898 /* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) },
3899 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) },
3900 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) },
3901 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) },
3902 { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
3903 /* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) },
3904 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) },
3905 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
3906 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790P) },
3907 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) },
3908 /* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) },
3909 { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E) },
3910 { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E_SE) },
3911 { USB_DEVICE(USB_VID_PCTV, USB_PID_DIBCOM_STK8096PVR) },
3912 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096PVR) },
3913 /* 85 */{ USB_DEVICE(USB_VID_HAMA, USB_PID_HAMA_DVBT_HYBRID) },
3914 { USB_DEVICE(USB_VID_MICROSOFT, USB_PID_XBOX_ONE_TUNER) },
3915 { 0 } /* Terminating entry */
3916 };
3917 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
3918
3919 #define DIB0700_DEFAULT_DEVICE_PROPERTIES \
3920 .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
3921 .usb_ctrl = DEVICE_SPECIFIC, \
3922 .firmware = "dvb-usb-dib0700-1.20.fw", \
3923 .download_firmware = dib0700_download_firmware, \
3924 .no_reconnect = 1, \
3925 .size_of_priv = sizeof(struct dib0700_state), \
3926 .i2c_algo = &dib0700_i2c_algo, \
3927 .identify_state = dib0700_identify_state
3928
3929 #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
3930 .streaming_ctrl = dib0700_streaming_ctrl, \
3931 .stream = { \
3932 .type = USB_BULK, \
3933 .count = 4, \
3934 .endpoint = ep, \
3935 .u = { \
3936 .bulk = { \
3937 .buffersize = 39480, \
3938 } \
3939 } \
3940 }
3941
3942 #define DIB0700_NUM_FRONTENDS(n) \
3943 .num_frontends = n, \
3944 .size_of_priv = sizeof(struct dib0700_adapter_state)
3945
3946 struct dvb_usb_device_properties dib0700_devices[] = {
3947 {
3948 DIB0700_DEFAULT_DEVICE_PROPERTIES,
3949
3950 .num_adapters = 1,
3951 .adapter = {
3952 {
3953 DIB0700_NUM_FRONTENDS(1),
3954 .fe = {{
3955 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3956 .pid_filter_count = 32,
3957 .pid_filter = stk7700p_pid_filter,
3958 .pid_filter_ctrl = stk7700p_pid_filter_ctrl,
3959 .frontend_attach = stk7700p_frontend_attach,
3960 .tuner_attach = stk7700p_tuner_attach,
3961
3962 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3963 }},
3964 },
3965 },
3966
3967 .num_device_descs = 8,
3968 .devices = {
3969 { "DiBcom STK7700P reference design",
3970 { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
3971 { NULL },
3972 },
3973 { "Hauppauge Nova-T Stick",
3974 { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
3975 { NULL },
3976 },
3977 { "AVerMedia AVerTV DVB-T Volar",
3978 { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
3979 { NULL },
3980 },
3981 { "Compro Videomate U500",
3982 { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
3983 { NULL },
3984 },
3985 { "Uniwill STK7700P based (Hama and others)",
3986 { &dib0700_usb_id_table[7], NULL },
3987 { NULL },
3988 },
3989 { "Leadtek Winfast DTV Dongle (STK7700P based)",
3990 { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
3991 { NULL },
3992 },
3993 { "AVerMedia AVerTV DVB-T Express",
3994 { &dib0700_usb_id_table[20] },
3995 { NULL },
3996 },
3997 { "Gigabyte U7000",
3998 { &dib0700_usb_id_table[21], NULL },
3999 { NULL },
4000 }
4001 },
4002
4003 .rc.core = {
4004 .rc_interval = DEFAULT_RC_INTERVAL,
4005 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4006 .rc_query = dib0700_rc_query_old_firmware,
4007 .allowed_protos = RC_PROTO_BIT_RC5 |
4008 RC_PROTO_BIT_RC6_MCE |
4009 RC_PROTO_BIT_NEC,
4010 .change_protocol = dib0700_change_protocol,
4011 },
4012 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4013
4014 .num_adapters = 2,
4015 .adapter = {
4016 {
4017 DIB0700_NUM_FRONTENDS(1),
4018 .fe = {{
4019 .frontend_attach = bristol_frontend_attach,
4020 .tuner_attach = bristol_tuner_attach,
4021
4022 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4023 }},
4024 }, {
4025 DIB0700_NUM_FRONTENDS(1),
4026 .fe = {{
4027 .frontend_attach = bristol_frontend_attach,
4028 .tuner_attach = bristol_tuner_attach,
4029
4030 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4031 }},
4032 }
4033 },
4034
4035 .num_device_descs = 1,
4036 .devices = {
4037 { "Hauppauge Nova-T 500 Dual DVB-T",
4038 { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
4039 { NULL },
4040 },
4041 },
4042
4043 .rc.core = {
4044 .rc_interval = DEFAULT_RC_INTERVAL,
4045 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4046 .rc_query = dib0700_rc_query_old_firmware,
4047 .allowed_protos = RC_PROTO_BIT_RC5 |
4048 RC_PROTO_BIT_RC6_MCE |
4049 RC_PROTO_BIT_NEC,
4050 .change_protocol = dib0700_change_protocol,
4051 },
4052 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4053
4054 .num_adapters = 2,
4055 .adapter = {
4056 {
4057 DIB0700_NUM_FRONTENDS(1),
4058 .fe = {{
4059 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4060 .pid_filter_count = 32,
4061 .pid_filter = stk70x0p_pid_filter,
4062 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4063 .frontend_attach = stk7700d_frontend_attach,
4064 .tuner_attach = stk7700d_tuner_attach,
4065
4066 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4067 }},
4068 }, {
4069 DIB0700_NUM_FRONTENDS(1),
4070 .fe = {{
4071 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4072 .pid_filter_count = 32,
4073 .pid_filter = stk70x0p_pid_filter,
4074 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4075 .frontend_attach = stk7700d_frontend_attach,
4076 .tuner_attach = stk7700d_tuner_attach,
4077
4078 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4079 }},
4080 }
4081 },
4082
4083 .num_device_descs = 5,
4084 .devices = {
4085 { "Pinnacle PCTV 2000e",
4086 { &dib0700_usb_id_table[11], NULL },
4087 { NULL },
4088 },
4089 { "Terratec Cinergy DT XS Diversity",
4090 { &dib0700_usb_id_table[12], NULL },
4091 { NULL },
4092 },
4093 { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
4094 { &dib0700_usb_id_table[13], NULL },
4095 { NULL },
4096 },
4097 { "DiBcom STK7700D reference design",
4098 { &dib0700_usb_id_table[14], NULL },
4099 { NULL },
4100 },
4101 { "YUAN High-Tech DiBcom STK7700D",
4102 { &dib0700_usb_id_table[55], NULL },
4103 { NULL },
4104 },
4105
4106 },
4107
4108 .rc.core = {
4109 .rc_interval = DEFAULT_RC_INTERVAL,
4110 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4111 .rc_query = dib0700_rc_query_old_firmware,
4112 .allowed_protos = RC_PROTO_BIT_RC5 |
4113 RC_PROTO_BIT_RC6_MCE |
4114 RC_PROTO_BIT_NEC,
4115 .change_protocol = dib0700_change_protocol,
4116 },
4117 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4118
4119 .num_adapters = 1,
4120 .adapter = {
4121 {
4122 DIB0700_NUM_FRONTENDS(1),
4123 .fe = {{
4124 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4125 .pid_filter_count = 32,
4126 .pid_filter = stk70x0p_pid_filter,
4127 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4128 .frontend_attach = stk7700P2_frontend_attach,
4129 .tuner_attach = stk7700d_tuner_attach,
4130
4131 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4132 }},
4133 },
4134 },
4135
4136 .num_device_descs = 3,
4137 .devices = {
4138 { "ASUS My Cinema U3000 Mini DVBT Tuner",
4139 { &dib0700_usb_id_table[23], NULL },
4140 { NULL },
4141 },
4142 { "Yuan EC372S",
4143 { &dib0700_usb_id_table[31], NULL },
4144 { NULL },
4145 },
4146 { "Terratec Cinergy T Express",
4147 { &dib0700_usb_id_table[42], NULL },
4148 { NULL },
4149 }
4150 },
4151
4152 .rc.core = {
4153 .rc_interval = DEFAULT_RC_INTERVAL,
4154 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4155 .module_name = "dib0700",
4156 .rc_query = dib0700_rc_query_old_firmware,
4157 .allowed_protos = RC_PROTO_BIT_RC5 |
4158 RC_PROTO_BIT_RC6_MCE |
4159 RC_PROTO_BIT_NEC,
4160 .change_protocol = dib0700_change_protocol,
4161 },
4162 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4163
4164 .num_adapters = 1,
4165 .adapter = {
4166 {
4167 DIB0700_NUM_FRONTENDS(1),
4168 .fe = {{
4169 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4170 .pid_filter_count = 32,
4171 .pid_filter = stk70x0p_pid_filter,
4172 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4173 .frontend_attach = stk7070p_frontend_attach,
4174 .tuner_attach = dib7070p_tuner_attach,
4175
4176 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4177 }},
4178 },
4179 },
4180
4181 .num_device_descs = 12,
4182 .devices = {
4183 { "DiBcom STK7070P reference design",
4184 { &dib0700_usb_id_table[15], NULL },
4185 { NULL },
4186 },
4187 { "Pinnacle PCTV DVB-T Flash Stick",
4188 { &dib0700_usb_id_table[16], NULL },
4189 { NULL },
4190 },
4191 { "Artec T14BR DVB-T",
4192 { &dib0700_usb_id_table[22], NULL },
4193 { NULL },
4194 },
4195 { "ASUS My Cinema U3100 Mini DVBT Tuner",
4196 { &dib0700_usb_id_table[24], NULL },
4197 { NULL },
4198 },
4199 { "Hauppauge Nova-T Stick",
4200 { &dib0700_usb_id_table[25], NULL },
4201 { NULL },
4202 },
4203 { "Hauppauge Nova-T MyTV.t",
4204 { &dib0700_usb_id_table[26], NULL },
4205 { NULL },
4206 },
4207 { "Pinnacle PCTV 72e",
4208 { &dib0700_usb_id_table[29], NULL },
4209 { NULL },
4210 },
4211 { "Pinnacle PCTV 73e",
4212 { &dib0700_usb_id_table[30], NULL },
4213 { NULL },
4214 },
4215 { "Elgato EyeTV DTT",
4216 { &dib0700_usb_id_table[49], NULL },
4217 { NULL },
4218 },
4219 { "Yuan PD378S",
4220 { &dib0700_usb_id_table[45], NULL },
4221 { NULL },
4222 },
4223 { "Elgato EyeTV Dtt Dlx PD378S",
4224 { &dib0700_usb_id_table[50], NULL },
4225 { NULL },
4226 },
4227 { "Elgato EyeTV DTT rev. 2",
4228 { &dib0700_usb_id_table[80], NULL },
4229 { NULL },
4230 },
4231 },
4232
4233 .rc.core = {
4234 .rc_interval = DEFAULT_RC_INTERVAL,
4235 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4236 .module_name = "dib0700",
4237 .rc_query = dib0700_rc_query_old_firmware,
4238 .allowed_protos = RC_PROTO_BIT_RC5 |
4239 RC_PROTO_BIT_RC6_MCE |
4240 RC_PROTO_BIT_NEC,
4241 .change_protocol = dib0700_change_protocol,
4242 },
4243 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4244
4245 .num_adapters = 1,
4246 .adapter = {
4247 {
4248 DIB0700_NUM_FRONTENDS(1),
4249 .fe = {{
4250 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4251 .pid_filter_count = 32,
4252 .pid_filter = stk70x0p_pid_filter,
4253 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4254 .frontend_attach = stk7070p_frontend_attach,
4255 .tuner_attach = dib7070p_tuner_attach,
4256
4257 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4258 }},
4259 },
4260 },
4261
4262 .num_device_descs = 3,
4263 .devices = {
4264 { "Pinnacle PCTV 73A",
4265 { &dib0700_usb_id_table[56], NULL },
4266 { NULL },
4267 },
4268 { "Pinnacle PCTV 73e SE",
4269 { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
4270 { NULL },
4271 },
4272 { "Pinnacle PCTV 282e",
4273 { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
4274 { NULL },
4275 },
4276 },
4277
4278 .rc.core = {
4279 .rc_interval = DEFAULT_RC_INTERVAL,
4280 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4281 .module_name = "dib0700",
4282 .rc_query = dib0700_rc_query_old_firmware,
4283 .allowed_protos = RC_PROTO_BIT_RC5 |
4284 RC_PROTO_BIT_RC6_MCE |
4285 RC_PROTO_BIT_NEC,
4286 .change_protocol = dib0700_change_protocol,
4287 },
4288 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4289
4290 .num_adapters = 2,
4291 .adapter = {
4292 {
4293 DIB0700_NUM_FRONTENDS(1),
4294 .fe = {{
4295 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4296 .pid_filter_count = 32,
4297 .pid_filter = stk70x0p_pid_filter,
4298 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4299 .frontend_attach = novatd_frontend_attach,
4300 .tuner_attach = dib7070p_tuner_attach,
4301
4302 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4303 }},
4304 }, {
4305 DIB0700_NUM_FRONTENDS(1),
4306 .fe = {{
4307 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4308 .pid_filter_count = 32,
4309 .pid_filter = stk70x0p_pid_filter,
4310 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4311 .frontend_attach = novatd_frontend_attach,
4312 .tuner_attach = dib7070p_tuner_attach,
4313
4314 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4315 }},
4316 }
4317 },
4318
4319 .num_device_descs = 3,
4320 .devices = {
4321 { "Hauppauge Nova-TD Stick (52009)",
4322 { &dib0700_usb_id_table[35], NULL },
4323 { NULL },
4324 },
4325 { "PCTV 2002e",
4326 { &dib0700_usb_id_table[81], NULL },
4327 { NULL },
4328 },
4329 { "PCTV 2002e SE",
4330 { &dib0700_usb_id_table[82], NULL },
4331 { NULL },
4332 },
4333 },
4334
4335 .rc.core = {
4336 .rc_interval = DEFAULT_RC_INTERVAL,
4337 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4338 .module_name = "dib0700",
4339 .rc_query = dib0700_rc_query_old_firmware,
4340 .allowed_protos = RC_PROTO_BIT_RC5 |
4341 RC_PROTO_BIT_RC6_MCE |
4342 RC_PROTO_BIT_NEC,
4343 .change_protocol = dib0700_change_protocol,
4344 },
4345 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4346
4347 .num_adapters = 2,
4348 .adapter = {
4349 {
4350 DIB0700_NUM_FRONTENDS(1),
4351 .fe = {{
4352 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4353 .pid_filter_count = 32,
4354 .pid_filter = stk70x0p_pid_filter,
4355 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4356 .frontend_attach = stk7070pd_frontend_attach0,
4357 .tuner_attach = dib7070p_tuner_attach,
4358
4359 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4360 }},
4361 }, {
4362 DIB0700_NUM_FRONTENDS(1),
4363 .fe = {{
4364 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4365 .pid_filter_count = 32,
4366 .pid_filter = stk70x0p_pid_filter,
4367 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4368 .frontend_attach = stk7070pd_frontend_attach1,
4369 .tuner_attach = dib7070p_tuner_attach,
4370
4371 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4372 }},
4373 }
4374 },
4375
4376 .num_device_descs = 5,
4377 .devices = {
4378 { "DiBcom STK7070PD reference design",
4379 { &dib0700_usb_id_table[17], NULL },
4380 { NULL },
4381 },
4382 { "Pinnacle PCTV Dual DVB-T Diversity Stick",
4383 { &dib0700_usb_id_table[18], NULL },
4384 { NULL },
4385 },
4386 { "Hauppauge Nova-TD-500 (84xxx)",
4387 { &dib0700_usb_id_table[36], NULL },
4388 { NULL },
4389 },
4390 { "Terratec Cinergy DT USB XS Diversity/ T5",
4391 { &dib0700_usb_id_table[43],
4392 &dib0700_usb_id_table[53], NULL},
4393 { NULL },
4394 },
4395 { "Sony PlayTV",
4396 { &dib0700_usb_id_table[44], NULL },
4397 { NULL },
4398 },
4399 },
4400
4401 .rc.core = {
4402 .rc_interval = DEFAULT_RC_INTERVAL,
4403 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4404 .module_name = "dib0700",
4405 .rc_query = dib0700_rc_query_old_firmware,
4406 .allowed_protos = RC_PROTO_BIT_RC5 |
4407 RC_PROTO_BIT_RC6_MCE |
4408 RC_PROTO_BIT_NEC,
4409 .change_protocol = dib0700_change_protocol,
4410 },
4411 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4412
4413 .num_adapters = 2,
4414 .adapter = {
4415 {
4416 DIB0700_NUM_FRONTENDS(1),
4417 .fe = {{
4418 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4419 .pid_filter_count = 32,
4420 .pid_filter = stk70x0p_pid_filter,
4421 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4422 .frontend_attach = stk7070pd_frontend_attach0,
4423 .tuner_attach = dib7070p_tuner_attach,
4424
4425 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4426 }},
4427 }, {
4428 DIB0700_NUM_FRONTENDS(1),
4429 .fe = {{
4430 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4431 .pid_filter_count = 32,
4432 .pid_filter = stk70x0p_pid_filter,
4433 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4434 .frontend_attach = stk7070pd_frontend_attach1,
4435 .tuner_attach = dib7070p_tuner_attach,
4436
4437 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4438 }},
4439 }
4440 },
4441
4442 .num_device_descs = 1,
4443 .devices = {
4444 { "Elgato EyeTV Diversity",
4445 { &dib0700_usb_id_table[68], NULL },
4446 { NULL },
4447 },
4448 },
4449
4450 .rc.core = {
4451 .rc_interval = DEFAULT_RC_INTERVAL,
4452 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
4453 .module_name = "dib0700",
4454 .rc_query = dib0700_rc_query_old_firmware,
4455 .allowed_protos = RC_PROTO_BIT_RC5 |
4456 RC_PROTO_BIT_RC6_MCE |
4457 RC_PROTO_BIT_NEC,
4458 .change_protocol = dib0700_change_protocol,
4459 },
4460 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4461
4462 .num_adapters = 1,
4463 .adapter = {
4464 {
4465 DIB0700_NUM_FRONTENDS(1),
4466 .fe = {{
4467 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4468 .pid_filter_count = 32,
4469 .pid_filter = stk70x0p_pid_filter,
4470 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4471 .frontend_attach = stk7700ph_frontend_attach,
4472 .tuner_attach = stk7700ph_tuner_attach,
4473
4474 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4475 }},
4476 },
4477 },
4478
4479 .num_device_descs = 10,
4480 .devices = {
4481 { "Terratec Cinergy HT USB XE",
4482 { &dib0700_usb_id_table[27], NULL },
4483 { NULL },
4484 },
4485 { "Pinnacle Expresscard 320cx",
4486 { &dib0700_usb_id_table[28], NULL },
4487 { NULL },
4488 },
4489 { "Terratec Cinergy HT Express",
4490 { &dib0700_usb_id_table[32], NULL },
4491 { NULL },
4492 },
4493 { "Gigabyte U8000-RH",
4494 { &dib0700_usb_id_table[37], NULL },
4495 { NULL },
4496 },
4497 { "YUAN High-Tech STK7700PH",
4498 { &dib0700_usb_id_table[38], NULL },
4499 { NULL },
4500 },
4501 { "Asus My Cinema-U3000Hybrid",
4502 { &dib0700_usb_id_table[39], NULL },
4503 { NULL },
4504 },
4505 { "YUAN High-Tech MC770",
4506 { &dib0700_usb_id_table[48], NULL },
4507 { NULL },
4508 },
4509 { "Leadtek WinFast DTV Dongle H",
4510 { &dib0700_usb_id_table[51], NULL },
4511 { NULL },
4512 },
4513 { "YUAN High-Tech STK7700D",
4514 { &dib0700_usb_id_table[54], NULL },
4515 { NULL },
4516 },
4517 { "Hama DVB=T Hybrid USB Stick",
4518 { &dib0700_usb_id_table[85], NULL },
4519 { NULL },
4520 },
4521 },
4522
4523 .rc.core = {
4524 .rc_interval = DEFAULT_RC_INTERVAL,
4525 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4526 .module_name = "dib0700",
4527 .rc_query = dib0700_rc_query_old_firmware,
4528 .allowed_protos = RC_PROTO_BIT_RC5 |
4529 RC_PROTO_BIT_RC6_MCE |
4530 RC_PROTO_BIT_NEC,
4531 .change_protocol = dib0700_change_protocol,
4532 },
4533 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4534 .num_adapters = 1,
4535 .adapter = {
4536 {
4537 DIB0700_NUM_FRONTENDS(1),
4538 .fe = {{
4539 .frontend_attach = s5h1411_frontend_attach,
4540 .tuner_attach = xc5000_tuner_attach,
4541
4542 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4543 }},
4544 },
4545 },
4546
4547 .num_device_descs = 2,
4548 .devices = {
4549 { "Pinnacle PCTV HD Pro USB Stick",
4550 { &dib0700_usb_id_table[40], NULL },
4551 { NULL },
4552 },
4553 { "Pinnacle PCTV HD USB Stick",
4554 { &dib0700_usb_id_table[41], NULL },
4555 { NULL },
4556 },
4557 },
4558
4559 .rc.core = {
4560 .rc_interval = DEFAULT_RC_INTERVAL,
4561 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4562 .module_name = "dib0700",
4563 .rc_query = dib0700_rc_query_old_firmware,
4564 .allowed_protos = RC_PROTO_BIT_RC5 |
4565 RC_PROTO_BIT_RC6_MCE |
4566 RC_PROTO_BIT_NEC,
4567 .change_protocol = dib0700_change_protocol,
4568 },
4569 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4570 .num_adapters = 1,
4571 .adapter = {
4572 {
4573 DIB0700_NUM_FRONTENDS(1),
4574 .fe = {{
4575 .frontend_attach = lgdt3305_frontend_attach,
4576 .tuner_attach = mxl5007t_tuner_attach,
4577
4578 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4579 }},
4580 },
4581 },
4582
4583 .num_device_descs = 2,
4584 .devices = {
4585 { "Hauppauge ATSC MiniCard (B200)",
4586 { &dib0700_usb_id_table[46], NULL },
4587 { NULL },
4588 },
4589 { "Hauppauge ATSC MiniCard (B210)",
4590 { &dib0700_usb_id_table[47], NULL },
4591 { NULL },
4592 },
4593 },
4594 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4595
4596 .num_adapters = 1,
4597 .adapter = {
4598 {
4599 DIB0700_NUM_FRONTENDS(1),
4600 .fe = {{
4601 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4602 .pid_filter_count = 32,
4603 .pid_filter = stk70x0p_pid_filter,
4604 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4605 .frontend_attach = stk7770p_frontend_attach,
4606 .tuner_attach = dib7770p_tuner_attach,
4607
4608 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4609 }},
4610 },
4611 },
4612
4613 .num_device_descs = 4,
4614 .devices = {
4615 { "DiBcom STK7770P reference design",
4616 { &dib0700_usb_id_table[59], NULL },
4617 { NULL },
4618 },
4619 { "Terratec Cinergy T USB XXS (HD)/ T3",
4620 { &dib0700_usb_id_table[33],
4621 &dib0700_usb_id_table[52],
4622 &dib0700_usb_id_table[60], NULL},
4623 { NULL },
4624 },
4625 { "TechniSat AirStar TeleStick 2",
4626 { &dib0700_usb_id_table[74], NULL },
4627 { NULL },
4628 },
4629 { "Medion CTX1921 DVB-T USB",
4630 { &dib0700_usb_id_table[75], NULL },
4631 { NULL },
4632 },
4633 },
4634
4635 .rc.core = {
4636 .rc_interval = DEFAULT_RC_INTERVAL,
4637 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4638 .module_name = "dib0700",
4639 .rc_query = dib0700_rc_query_old_firmware,
4640 .allowed_protos = RC_PROTO_BIT_RC5 |
4641 RC_PROTO_BIT_RC6_MCE |
4642 RC_PROTO_BIT_NEC,
4643 .change_protocol = dib0700_change_protocol,
4644 },
4645 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4646 .num_adapters = 1,
4647 .adapter = {
4648 {
4649 DIB0700_NUM_FRONTENDS(1),
4650 .fe = {{
4651 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4652 .pid_filter_count = 32,
4653 .pid_filter = stk80xx_pid_filter,
4654 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4655 .frontend_attach = stk807x_frontend_attach,
4656 .tuner_attach = dib807x_tuner_attach,
4657
4658 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4659 }},
4660 },
4661 },
4662
4663 .num_device_descs = 3,
4664 .devices = {
4665 { "DiBcom STK807xP reference design",
4666 { &dib0700_usb_id_table[62], NULL },
4667 { NULL },
4668 },
4669 { "Prolink Pixelview SBTVD",
4670 { &dib0700_usb_id_table[63], NULL },
4671 { NULL },
4672 },
4673 { "EvolutePC TVWay+",
4674 { &dib0700_usb_id_table[64], NULL },
4675 { NULL },
4676 },
4677 },
4678
4679 .rc.core = {
4680 .rc_interval = DEFAULT_RC_INTERVAL,
4681 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
4682 .module_name = "dib0700",
4683 .rc_query = dib0700_rc_query_old_firmware,
4684 .allowed_protos = RC_PROTO_BIT_RC5 |
4685 RC_PROTO_BIT_RC6_MCE |
4686 RC_PROTO_BIT_NEC,
4687 .change_protocol = dib0700_change_protocol,
4688 },
4689 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4690 .num_adapters = 2,
4691 .adapter = {
4692 {
4693 DIB0700_NUM_FRONTENDS(1),
4694 .fe = {{
4695 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4696 .pid_filter_count = 32,
4697 .pid_filter = stk80xx_pid_filter,
4698 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4699 .frontend_attach = stk807xpvr_frontend_attach0,
4700 .tuner_attach = dib807x_tuner_attach,
4701
4702 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4703 }},
4704 },
4705 {
4706 DIB0700_NUM_FRONTENDS(1),
4707 .fe = {{
4708 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4709 .pid_filter_count = 32,
4710 .pid_filter = stk80xx_pid_filter,
4711 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4712 .frontend_attach = stk807xpvr_frontend_attach1,
4713 .tuner_attach = dib807x_tuner_attach,
4714
4715 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4716 }},
4717 },
4718 },
4719
4720 .num_device_descs = 1,
4721 .devices = {
4722 { "DiBcom STK807xPVR reference design",
4723 { &dib0700_usb_id_table[61], NULL },
4724 { NULL },
4725 },
4726 },
4727
4728 .rc.core = {
4729 .rc_interval = DEFAULT_RC_INTERVAL,
4730 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4731 .module_name = "dib0700",
4732 .rc_query = dib0700_rc_query_old_firmware,
4733 .allowed_protos = RC_PROTO_BIT_RC5 |
4734 RC_PROTO_BIT_RC6_MCE |
4735 RC_PROTO_BIT_NEC,
4736 .change_protocol = dib0700_change_protocol,
4737 },
4738 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4739 .num_adapters = 1,
4740 .adapter = {
4741 {
4742 DIB0700_NUM_FRONTENDS(1),
4743 .fe = {{
4744 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4745 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4746 .pid_filter_count = 32,
4747 .pid_filter = stk80xx_pid_filter,
4748 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4749 .frontend_attach = stk809x_frontend_attach,
4750 .tuner_attach = dib809x_tuner_attach,
4751
4752 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4753 }},
4754 },
4755 },
4756
4757 .num_device_descs = 1,
4758 .devices = {
4759 { "DiBcom STK8096GP reference design",
4760 { &dib0700_usb_id_table[67], NULL },
4761 { NULL },
4762 },
4763 },
4764
4765 .rc.core = {
4766 .rc_interval = DEFAULT_RC_INTERVAL,
4767 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4768 .module_name = "dib0700",
4769 .rc_query = dib0700_rc_query_old_firmware,
4770 .allowed_protos = RC_PROTO_BIT_RC5 |
4771 RC_PROTO_BIT_RC6_MCE |
4772 RC_PROTO_BIT_NEC,
4773 .change_protocol = dib0700_change_protocol,
4774 },
4775 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4776 .num_adapters = 1,
4777 .adapter = {
4778 {
4779 DIB0700_NUM_FRONTENDS(1),
4780 .fe = {{
4781 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4782 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4783 .pid_filter_count = 32,
4784 .pid_filter = dib90x0_pid_filter,
4785 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
4786 .frontend_attach = stk9090m_frontend_attach,
4787 .tuner_attach = dib9090_tuner_attach,
4788
4789 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4790 }},
4791 },
4792 },
4793
4794 .num_device_descs = 1,
4795 .devices = {
4796 { "DiBcom STK9090M reference design",
4797 { &dib0700_usb_id_table[69], NULL },
4798 { NULL },
4799 },
4800 },
4801
4802 .rc.core = {
4803 .rc_interval = DEFAULT_RC_INTERVAL,
4804 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4805 .module_name = "dib0700",
4806 .rc_query = dib0700_rc_query_old_firmware,
4807 .allowed_protos = RC_PROTO_BIT_RC5 |
4808 RC_PROTO_BIT_RC6_MCE |
4809 RC_PROTO_BIT_NEC,
4810 .change_protocol = dib0700_change_protocol,
4811 },
4812 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4813 .num_adapters = 1,
4814 .adapter = {
4815 {
4816 DIB0700_NUM_FRONTENDS(1),
4817 .fe = {{
4818 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4819 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4820 .pid_filter_count = 32,
4821 .pid_filter = stk80xx_pid_filter,
4822 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4823 .frontend_attach = nim8096md_frontend_attach,
4824 .tuner_attach = nim8096md_tuner_attach,
4825
4826 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4827 }},
4828 },
4829 },
4830
4831 .num_device_descs = 1,
4832 .devices = {
4833 { "DiBcom NIM8096MD reference design",
4834 { &dib0700_usb_id_table[70], NULL },
4835 { NULL },
4836 },
4837 },
4838
4839 .rc.core = {
4840 .rc_interval = DEFAULT_RC_INTERVAL,
4841 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4842 .module_name = "dib0700",
4843 .rc_query = dib0700_rc_query_old_firmware,
4844 .allowed_protos = RC_PROTO_BIT_RC5 |
4845 RC_PROTO_BIT_RC6_MCE |
4846 RC_PROTO_BIT_NEC,
4847 .change_protocol = dib0700_change_protocol,
4848 },
4849 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4850 .num_adapters = 1,
4851 .adapter = {
4852 {
4853 DIB0700_NUM_FRONTENDS(1),
4854 .fe = {{
4855 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4856 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4857 .pid_filter_count = 32,
4858 .pid_filter = dib90x0_pid_filter,
4859 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
4860 .frontend_attach = nim9090md_frontend_attach,
4861 .tuner_attach = nim9090md_tuner_attach,
4862
4863 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4864 }},
4865 },
4866 },
4867
4868 .num_device_descs = 1,
4869 .devices = {
4870 { "DiBcom NIM9090MD reference design",
4871 { &dib0700_usb_id_table[71], NULL },
4872 { NULL },
4873 },
4874 },
4875
4876 .rc.core = {
4877 .rc_interval = DEFAULT_RC_INTERVAL,
4878 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4879 .module_name = "dib0700",
4880 .rc_query = dib0700_rc_query_old_firmware,
4881 .allowed_protos = RC_PROTO_BIT_RC5 |
4882 RC_PROTO_BIT_RC6_MCE |
4883 RC_PROTO_BIT_NEC,
4884 .change_protocol = dib0700_change_protocol,
4885 },
4886 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4887 .num_adapters = 1,
4888 .adapter = {
4889 {
4890 DIB0700_NUM_FRONTENDS(1),
4891 .fe = {{
4892 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4893 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4894 .pid_filter_count = 32,
4895 .pid_filter = stk70x0p_pid_filter,
4896 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4897 .frontend_attach = nim7090_frontend_attach,
4898 .tuner_attach = nim7090_tuner_attach,
4899
4900 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4901 }},
4902 },
4903 },
4904
4905 .num_device_descs = 1,
4906 .devices = {
4907 { "DiBcom NIM7090 reference design",
4908 { &dib0700_usb_id_table[72], NULL },
4909 { NULL },
4910 },
4911 },
4912
4913 .rc.core = {
4914 .rc_interval = DEFAULT_RC_INTERVAL,
4915 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4916 .module_name = "dib0700",
4917 .rc_query = dib0700_rc_query_old_firmware,
4918 .allowed_protos = RC_PROTO_BIT_RC5 |
4919 RC_PROTO_BIT_RC6_MCE |
4920 RC_PROTO_BIT_NEC,
4921 .change_protocol = dib0700_change_protocol,
4922 },
4923 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4924 .num_adapters = 2,
4925 .adapter = {
4926 {
4927 DIB0700_NUM_FRONTENDS(1),
4928 .fe = {{
4929 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4930 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4931 .pid_filter_count = 32,
4932 .pid_filter = stk70x0p_pid_filter,
4933 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4934 .frontend_attach = tfe7090pvr_frontend0_attach,
4935 .tuner_attach = tfe7090pvr_tuner0_attach,
4936
4937 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4938 }},
4939 },
4940 {
4941 DIB0700_NUM_FRONTENDS(1),
4942 .fe = {{
4943 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4944 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4945 .pid_filter_count = 32,
4946 .pid_filter = stk70x0p_pid_filter,
4947 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4948 .frontend_attach = tfe7090pvr_frontend1_attach,
4949 .tuner_attach = tfe7090pvr_tuner1_attach,
4950
4951 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4952 }},
4953 },
4954 },
4955
4956 .num_device_descs = 1,
4957 .devices = {
4958 { "DiBcom TFE7090PVR reference design",
4959 { &dib0700_usb_id_table[73], NULL },
4960 { NULL },
4961 },
4962 },
4963
4964 .rc.core = {
4965 .rc_interval = DEFAULT_RC_INTERVAL,
4966 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4967 .module_name = "dib0700",
4968 .rc_query = dib0700_rc_query_old_firmware,
4969 .allowed_protos = RC_PROTO_BIT_RC5 |
4970 RC_PROTO_BIT_RC6_MCE |
4971 RC_PROTO_BIT_NEC,
4972 .change_protocol = dib0700_change_protocol,
4973 },
4974 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4975 .num_adapters = 1,
4976 .adapter = {
4977 {
4978 DIB0700_NUM_FRONTENDS(1),
4979 .fe = {{
4980 .frontend_attach = pctv340e_frontend_attach,
4981 .tuner_attach = xc4000_tuner_attach,
4982
4983 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4984 }},
4985 },
4986 },
4987
4988 .num_device_descs = 2,
4989 .devices = {
4990 { "Pinnacle PCTV 340e HD Pro USB Stick",
4991 { &dib0700_usb_id_table[76], NULL },
4992 { NULL },
4993 },
4994 { "Pinnacle PCTV Hybrid Stick Solo",
4995 { &dib0700_usb_id_table[77], NULL },
4996 { NULL },
4997 },
4998 },
4999 .rc.core = {
5000 .rc_interval = DEFAULT_RC_INTERVAL,
5001 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
5002 .module_name = "dib0700",
5003 .rc_query = dib0700_rc_query_old_firmware,
5004 .allowed_protos = RC_PROTO_BIT_RC5 |
5005 RC_PROTO_BIT_RC6_MCE |
5006 RC_PROTO_BIT_NEC,
5007 .change_protocol = dib0700_change_protocol,
5008 },
5009 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
5010 .num_adapters = 1,
5011 .adapter = {
5012 {
5013 DIB0700_NUM_FRONTENDS(1),
5014 .fe = {{
5015 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
5016 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
5017 .pid_filter_count = 32,
5018 .pid_filter = stk70x0p_pid_filter,
5019 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
5020 .frontend_attach = tfe7790p_frontend_attach,
5021 .tuner_attach = tfe7790p_tuner_attach,
5022
5023 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
5024 } },
5025 },
5026 },
5027
5028 .num_device_descs = 1,
5029 .devices = {
5030 { "DiBcom TFE7790P reference design",
5031 { &dib0700_usb_id_table[78], NULL },
5032 { NULL },
5033 },
5034 },
5035
5036 .rc.core = {
5037 .rc_interval = DEFAULT_RC_INTERVAL,
5038 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
5039 .module_name = "dib0700",
5040 .rc_query = dib0700_rc_query_old_firmware,
5041 .allowed_protos = RC_PROTO_BIT_RC5 |
5042 RC_PROTO_BIT_RC6_MCE |
5043 RC_PROTO_BIT_NEC,
5044 .change_protocol = dib0700_change_protocol,
5045 },
5046 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
5047 .num_adapters = 1,
5048 .adapter = {
5049 {
5050 DIB0700_NUM_FRONTENDS(1),
5051 .fe = {{
5052 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
5053 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
5054 .pid_filter_count = 32,
5055 .pid_filter = stk80xx_pid_filter,
5056 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
5057 .frontend_attach = tfe8096p_frontend_attach,
5058 .tuner_attach = tfe8096p_tuner_attach,
5059
5060 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
5061
5062 } },
5063 },
5064 },
5065
5066 .num_device_descs = 1,
5067 .devices = {
5068 { "DiBcom TFE8096P reference design",
5069 { &dib0700_usb_id_table[79], NULL },
5070 { NULL },
5071 },
5072 },
5073
5074 .rc.core = {
5075 .rc_interval = DEFAULT_RC_INTERVAL,
5076 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
5077 .module_name = "dib0700",
5078 .rc_query = dib0700_rc_query_old_firmware,
5079 .allowed_protos = RC_PROTO_BIT_RC5 |
5080 RC_PROTO_BIT_RC6_MCE |
5081 RC_PROTO_BIT_NEC,
5082 .change_protocol = dib0700_change_protocol,
5083 },
5084 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
5085 .num_adapters = 2,
5086 .adapter = {
5087 {
5088 .num_frontends = 1,
5089 .fe = {{
5090 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
5091 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
5092 .pid_filter_count = 32,
5093 .pid_filter = stk80xx_pid_filter,
5094 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
5095 .frontend_attach = stk809x_frontend_attach,
5096 .tuner_attach = dib809x_tuner_attach,
5097
5098 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
5099 } },
5100 .size_of_priv =
5101 sizeof(struct dib0700_adapter_state),
5102 }, {
5103 .num_frontends = 1,
5104 .fe = { {
5105 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
5106 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
5107 .pid_filter_count = 32,
5108 .pid_filter = stk80xx_pid_filter,
5109 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
5110 .frontend_attach = stk809x_frontend1_attach,
5111 .tuner_attach = dib809x_tuner_attach,
5112
5113 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
5114 } },
5115 .size_of_priv =
5116 sizeof(struct dib0700_adapter_state),
5117 },
5118 },
5119 .num_device_descs = 1,
5120 .devices = {
5121 { "DiBcom STK8096-PVR reference design",
5122 { &dib0700_usb_id_table[83],
5123 &dib0700_usb_id_table[84], NULL},
5124 { NULL },
5125 },
5126 },
5127
5128 .rc.core = {
5129 .rc_interval = DEFAULT_RC_INTERVAL,
5130 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
5131 .module_name = "dib0700",
5132 .rc_query = dib0700_rc_query_old_firmware,
5133 .allowed_protos = RC_PROTO_BIT_RC5 |
5134 RC_PROTO_BIT_RC6_MCE |
5135 RC_PROTO_BIT_NEC,
5136 .change_protocol = dib0700_change_protocol,
5137 },
5138 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
5139 .num_adapters = 1,
5140 .adapter = {
5141 {
5142 DIB0700_NUM_FRONTENDS(1),
5143 .fe = {{
5144 .frontend_attach = xbox_one_attach,
5145
5146 DIB0700_DEFAULT_STREAMING_CONFIG(0x82),
5147 } },
5148 },
5149 },
5150 .num_device_descs = 1,
5151 .devices = {
5152 { "Microsoft Xbox One Digital TV Tuner",
5153 { &dib0700_usb_id_table[86], NULL },
5154 { NULL },
5155 },
5156 },
5157 },
5158 };
5159
5160 int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
Linux with added FPC-III support