drivers/mfd/lp3943.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * TI/National Semiconductor LP3943 MFD Core Driver
   4  *
   5  * Copyright 2013 Texas Instruments
   6  *
   7  * Author: Milo Kim <milo.kim@ti.com>
   8  *
   9  * Driver structure:
  10  *   LP3943 is an integrated device capable of driving 16 output channels.
  11  *   It can be used for a GPIO expander and PWM generators.
  12  *
  13  *                                   LED control    General usage for a device
  14  *                                   ___________   ____________________________
  15  *
  16  *   LP3943 MFD ---- GPIO expander    leds-gpio        eg) HW enable pin
  17  *               |
  18  *               --- PWM generator    leds-pwm         eg) PWM input
  19  *
  20  *   Internal two PWM channels are used for LED dimming effect.
  21  *   And each output pin can be used as a GPIO as well.
  22  *   The LED functionality can work with GPIOs or PWMs.
  23  *   LEDs can be controlled with legacy leds-gpio(static brightness) or
  24  *   leds-pwm drivers(dynamic brightness control).
  25  *   Alternatively, it can be used for generic GPIO and PWM controller.
  26  *   For example, a GPIO is HW enable pin of a device.
  27  *   A PWM is input pin of a backlight device.
  28  */
  29
  30 #include <linux/err.h>
  31 #include <linux/gpio.h>
  32 #include <linux/i2c.h>
  33 #include <linux/mfd/core.h>
  34 #include <linux/mfd/lp3943.h>
  35 #include <linux/module.h>
  36 #include <linux/of.h>
  37 #include <linux/slab.h>
  38
  39 #define LP3943_MAX_REGISTERS            0x09
  40
  41 /* Register configuration for pin MUX */
  42 static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
  43         /* address, mask, shift */
  44         { LP3943_REG_MUX0, 0x03, 0 },
  45         { LP3943_REG_MUX0, 0x0C, 2 },
  46         { LP3943_REG_MUX0, 0x30, 4 },
  47         { LP3943_REG_MUX0, 0xC0, 6 },
  48         { LP3943_REG_MUX1, 0x03, 0 },
  49         { LP3943_REG_MUX1, 0x0C, 2 },
  50         { LP3943_REG_MUX1, 0x30, 4 },
  51         { LP3943_REG_MUX1, 0xC0, 6 },
  52         { LP3943_REG_MUX2, 0x03, 0 },
  53         { LP3943_REG_MUX2, 0x0C, 2 },
  54         { LP3943_REG_MUX2, 0x30, 4 },
  55         { LP3943_REG_MUX2, 0xC0, 6 },
  56         { LP3943_REG_MUX3, 0x03, 0 },
  57         { LP3943_REG_MUX3, 0x0C, 2 },
  58         { LP3943_REG_MUX3, 0x30, 4 },
  59         { LP3943_REG_MUX3, 0xC0, 6 },
  60 };
  61
  62 static const struct mfd_cell lp3943_devs[] = {
  63         {
  64                 .name = "lp3943-pwm",
  65                 .of_compatible = "ti,lp3943-pwm",
  66         },
  67         {
  68                 .name = "lp3943-gpio",
  69                 .of_compatible = "ti,lp3943-gpio",
  70         },
  71 };
  72
  73 int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read)
  74 {
  75         int ret;
  76         unsigned int val;
  77
  78         ret = regmap_read(lp3943->regmap, reg, &val);
  79         if (ret < 0)
  80                 return ret;
  81
  82         *read = (u8)val;
  83         return 0;
  84 }
  85 EXPORT_SYMBOL_GPL(lp3943_read_byte);
  86
  87 int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data)
  88 {
  89         return regmap_write(lp3943->regmap, reg, data);
  90 }
  91 EXPORT_SYMBOL_GPL(lp3943_write_byte);
  92
  93 int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data)
  94 {
  95         return regmap_update_bits(lp3943->regmap, reg, mask, data);
  96 }
  97 EXPORT_SYMBOL_GPL(lp3943_update_bits);
  98
  99 static const struct regmap_config lp3943_regmap_config = {
 100         .reg_bits = 8,
 101         .val_bits = 8,
 102         .max_register = LP3943_MAX_REGISTERS,
 103 };
 104
 105 static int lp3943_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 106 {
 107         struct lp3943 *lp3943;
 108         struct device *dev = &cl->dev;
 109
 110         lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL);
 111         if (!lp3943)
 112                 return -ENOMEM;
 113
 114         lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config);
 115         if (IS_ERR(lp3943->regmap))
 116                 return PTR_ERR(lp3943->regmap);
 117
 118         lp3943->pdata = dev_get_platdata(dev);
 119         lp3943->dev = dev;
 120         lp3943->mux_cfg = lp3943_mux_cfg;
 121         i2c_set_clientdata(cl, lp3943);
 122
 123         return devm_mfd_add_devices(dev, -1, lp3943_devs,
 124                                     ARRAY_SIZE(lp3943_devs),
 125                                     NULL, 0, NULL);
 126 }
 127
 128 static const struct i2c_device_id lp3943_ids[] = {
 129         { "lp3943", 0 },
 130         { }
 131 };
 132 MODULE_DEVICE_TABLE(i2c, lp3943_ids);
 133
 134 #ifdef CONFIG_OF
 135 static const struct of_device_id lp3943_of_match[] = {
 136         { .compatible = "ti,lp3943", },
 137         { }
 138 };
 139 MODULE_DEVICE_TABLE(of, lp3943_of_match);
 140 #endif
 141
 142 static struct i2c_driver lp3943_driver = {
 143         .probe = lp3943_probe,
 144         .driver = {
 145                 .name = "lp3943",
 146                 .of_match_table = of_match_ptr(lp3943_of_match),
 147         },
 148         .id_table = lp3943_ids,
 149 };
 150
 151 module_i2c_driver(lp3943_driver);
 152
 153 MODULE_DESCRIPTION("LP3943 MFD Core Driver");
 154 MODULE_AUTHOR("Milo Kim");
 155 MODULE_LICENSE("GPL");