drivers/mfd/omap-usb-tll.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /**
   3  * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
   4  *
   5  * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com
   6  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
   7  * Author: Roger Quadros <rogerq@ti.com>
   8  */
   9 #include <linux/kernel.h>
  10 #include <linux/module.h>
  11 #include <linux/types.h>
  12 #include <linux/slab.h>
  13 #include <linux/spinlock.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/clk.h>
  16 #include <linux/io.h>
  17 #include <linux/err.h>
  18 #include <linux/pm_runtime.h>
  19 #include <linux/platform_data/usb-omap.h>
  20 #include <linux/of.h>
  21
  22 #include "omap-usb.h"
  23
  24 #define USBTLL_DRIVER_NAME      "usbhs_tll"
  25
  26 /* TLL Register Set */
  27 #define OMAP_USBTLL_REVISION                            (0x00)
  28 #define OMAP_USBTLL_SYSCONFIG                           (0x10)
  29 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY                 (1 << 8)
  30 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE                 (1 << 3)
  31 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP                 (1 << 2)
  32 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET                 (1 << 1)
  33 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE                  (1 << 0)
  34
  35 #define OMAP_USBTLL_SYSSTATUS                           (0x14)
  36 #define OMAP_USBTLL_SYSSTATUS_RESETDONE                 (1 << 0)
  37
  38 #define OMAP_USBTLL_IRQSTATUS                           (0x18)
  39 #define OMAP_USBTLL_IRQENABLE                           (0x1C)
  40
  41 #define OMAP_TLL_SHARED_CONF                            (0x30)
  42 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN             (1 << 6)
  43 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN            (1 << 5)
  44 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION              (1 << 2)
  45 #define OMAP_TLL_SHARED_CONF_FCLK_REQ                   (1 << 1)
  46 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON                 (1 << 0)
  47
  48 #define OMAP_TLL_CHANNEL_CONF(num)                      (0x040 + 0x004 * num)
  49 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT            24
  50 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS                   (1 << 16)
  51 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS                  (1 << 15)
  52 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
  53 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE         (1 << 10)
  54 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE              (1 << 9)
  55 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE               (1 << 8)
  56 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI     (2 << 1)
  57 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS             (1 << 1)
  58 #define OMAP_TLL_CHANNEL_CONF_CHANEN                    (1 << 0)
  59
  60 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0              0x0
  61 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM                0x1
  62 #define OMAP_TLL_FSLSMODE_3PIN_PHY                      0x2
  63 #define OMAP_TLL_FSLSMODE_4PIN_PHY                      0x3
  64 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0              0x4
  65 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM                0x5
  66 #define OMAP_TLL_FSLSMODE_3PIN_TLL                      0x6
  67 #define OMAP_TLL_FSLSMODE_4PIN_TLL                      0x7
  68 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0              0xA
  69 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM                0xB
  70
  71 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num)                (0x804 + 0x100 * num)
  72 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num)               (0x807 + 0x100 * num)
  73 #define OMAP_TLL_ULPI_OTG_CTRL(num)                     (0x80A + 0x100 * num)
  74 #define OMAP_TLL_ULPI_INT_EN_RISE(num)                  (0x80D + 0x100 * num)
  75 #define OMAP_TLL_ULPI_INT_EN_FALL(num)                  (0x810 + 0x100 * num)
  76 #define OMAP_TLL_ULPI_INT_STATUS(num)                   (0x813 + 0x100 * num)
  77 #define OMAP_TLL_ULPI_INT_LATCH(num)                    (0x814 + 0x100 * num)
  78 #define OMAP_TLL_ULPI_DEBUG(num)                        (0x815 + 0x100 * num)
  79 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)             (0x816 + 0x100 * num)
  80
  81 #define OMAP_REV2_TLL_CHANNEL_COUNT                     2
  82 #define OMAP_TLL_CHANNEL_COUNT                          3
  83 #define OMAP_TLL_CHANNEL_1_EN_MASK                      (1 << 0)
  84 #define OMAP_TLL_CHANNEL_2_EN_MASK                      (1 << 1)
  85 #define OMAP_TLL_CHANNEL_3_EN_MASK                      (1 << 2)
  86
  87 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */
  88 #define OMAP_USBTLL_REV1                0x00000015      /* OMAP3 */
  89 #define OMAP_USBTLL_REV2                0x00000018      /* OMAP 3630 */
  90 #define OMAP_USBTLL_REV3                0x00000004      /* OMAP4 */
  91 #define OMAP_USBTLL_REV4                0x00000006      /* OMAP5 */
  92
  93 #define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
  94
  95 /* only PHY and UNUSED modes don't need TLL */
  96 #define omap_usb_mode_needs_tll(x)      ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
  97                                          (x) != OMAP_EHCI_PORT_MODE_PHY)
  98
  99 struct usbtll_omap {
 100         void __iomem    *base;
 101         int             nch;            /* num. of channels */
 102         struct clk      *ch_clk[];      /* must be the last member */
 103 };
 104
 105 /*-------------------------------------------------------------------------*/
 106
 107 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
 108 static struct device    *tll_dev;
 109 static DEFINE_SPINLOCK(tll_lock);       /* serialize access to tll_dev */
 110
 111 /*-------------------------------------------------------------------------*/
 112
 113 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
 114 {
 115         writel_relaxed(val, base + reg);
 116 }
 117
 118 static inline u32 usbtll_read(void __iomem *base, u32 reg)
 119 {
 120         return readl_relaxed(base + reg);
 121 }
 122
 123 static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val)
 124 {
 125         writeb_relaxed(val, base + reg);
 126 }
 127
 128 static inline u8 usbtll_readb(void __iomem *base, u32 reg)
 129 {
 130         return readb_relaxed(base + reg);
 131 }
 132
 133 /*-------------------------------------------------------------------------*/
 134
 135 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 136 {
 137         switch (pmode) {
 138         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 139         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 140         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 141         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 142         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 143         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 144         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 145         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 146         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 147         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 148                 return true;
 149
 150         default:
 151                 return false;
 152         }
 153 }
 154
 155 /*
 156  * convert the port-mode enum to a value we can use in the FSLSMODE
 157  * field of USBTLL_CHANNEL_CONF
 158  */
 159 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 160 {
 161         switch (mode) {
 162         case OMAP_USBHS_PORT_MODE_UNUSED:
 163         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 164                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
 165
 166         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 167                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
 168
 169         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 170                 return OMAP_TLL_FSLSMODE_3PIN_PHY;
 171
 172         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 173                 return OMAP_TLL_FSLSMODE_4PIN_PHY;
 174
 175         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 176                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
 177
 178         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 179                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
 180
 181         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 182                 return OMAP_TLL_FSLSMODE_3PIN_TLL;
 183
 184         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 185                 return OMAP_TLL_FSLSMODE_4PIN_TLL;
 186
 187         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 188                 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
 189
 190         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 191                 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
 192         default:
 193                 pr_warn("Invalid port mode, using default\n");
 194                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
 195         }
 196 }
 197
 198 /**
 199  * usbtll_omap_probe - initialize TI-based HCDs
 200  *
 201  * Allocates basic resources for this USB host controller.
 202  */
 203 static int usbtll_omap_probe(struct platform_device *pdev)
 204 {
 205         struct device                           *dev =  &pdev->dev;
 206         struct resource                         *res;
 207         struct usbtll_omap                      *tll;
 208         void __iomem                            *base;
 209         int                                     i, nch, ver;
 210
 211         dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 212
 213         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 214         base = devm_ioremap_resource(dev, res);
 215         if (IS_ERR(base))
 216                 return PTR_ERR(base);
 217
 218         pm_runtime_enable(dev);
 219         pm_runtime_get_sync(dev);
 220
 221         ver = usbtll_read(base, OMAP_USBTLL_REVISION);
 222         switch (ver) {
 223         case OMAP_USBTLL_REV1:
 224         case OMAP_USBTLL_REV4:
 225                 nch = OMAP_TLL_CHANNEL_COUNT;
 226                 break;
 227         case OMAP_USBTLL_REV2:
 228         case OMAP_USBTLL_REV3:
 229                 nch = OMAP_REV2_TLL_CHANNEL_COUNT;
 230                 break;
 231         default:
 232                 nch = OMAP_TLL_CHANNEL_COUNT;
 233                 dev_dbg(dev, "rev 0x%x not recognized, assuming %d channels\n",
 234                         ver, nch);
 235                 break;
 236         }
 237
 238         tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
 239                            GFP_KERNEL);
 240         if (!tll) {
 241                 pm_runtime_put_sync(dev);
 242                 pm_runtime_disable(dev);
 243                 return -ENOMEM;
 244         }
 245
 246         tll->base = base;
 247         tll->nch = nch;
 248         platform_set_drvdata(pdev, tll);
 249
 250         for (i = 0; i < nch; i++) {
 251                 char clkname[] = "usb_tll_hs_usb_chx_clk";
 252
 253                 snprintf(clkname, sizeof(clkname),
 254                                         "usb_tll_hs_usb_ch%d_clk", i);
 255                 tll->ch_clk[i] = clk_get(dev, clkname);
 256
 257                 if (IS_ERR(tll->ch_clk[i]))
 258                         dev_dbg(dev, "can't get clock : %s\n", clkname);
 259                 else
 260                         clk_prepare(tll->ch_clk[i]);
 261         }
 262
 263         pm_runtime_put_sync(dev);
 264         /* only after this can omap_tll_enable/disable work */
 265         spin_lock(&tll_lock);
 266         tll_dev = dev;
 267         spin_unlock(&tll_lock);
 268
 269         return 0;
 270 }
 271
 272 /**
 273  * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
 274  * @pdev: USB Host Controller being removed
 275  *
 276  * Reverses the effect of usbtll_omap_probe().
 277  */
 278 static int usbtll_omap_remove(struct platform_device *pdev)
 279 {
 280         struct usbtll_omap *tll = platform_get_drvdata(pdev);
 281         int i;
 282
 283         spin_lock(&tll_lock);
 284         tll_dev = NULL;
 285         spin_unlock(&tll_lock);
 286
 287         for (i = 0; i < tll->nch; i++) {
 288                 if (!IS_ERR(tll->ch_clk[i])) {
 289                         clk_unprepare(tll->ch_clk[i]);
 290                         clk_put(tll->ch_clk[i]);
 291                 }
 292         }
 293
 294         pm_runtime_disable(&pdev->dev);
 295         return 0;
 296 }
 297
 298 static const struct of_device_id usbtll_omap_dt_ids[] = {
 299         { .compatible = "ti,usbhs-tll" },
 300         { }
 301 };
 302
 303 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
 304
 305 static struct platform_driver usbtll_omap_driver = {
 306         .driver = {
 307                 .name           = usbtll_driver_name,
 308                 .of_match_table = usbtll_omap_dt_ids,
 309         },
 310         .probe          = usbtll_omap_probe,
 311         .remove         = usbtll_omap_remove,
 312 };
 313
 314 int omap_tll_init(struct usbhs_omap_platform_data *pdata)
 315 {
 316         int i;
 317         bool needs_tll;
 318         unsigned reg;
 319         struct usbtll_omap *tll;
 320
 321         if (!tll_dev)
 322                 return -ENODEV;
 323
 324         pm_runtime_get_sync(tll_dev);
 325
 326         spin_lock(&tll_lock);
 327         tll = dev_get_drvdata(tll_dev);
 328         needs_tll = false;
 329         for (i = 0; i < tll->nch; i++)
 330                 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
 331
 332         if (needs_tll) {
 333                 void __iomem *base = tll->base;
 334
 335                 /* Program Common TLL register */
 336                 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
 337                 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
 338                         | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
 339                 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
 340                 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
 341
 342                 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
 343
 344                 /* Enable channels now */
 345                 for (i = 0; i < tll->nch; i++) {
 346                         reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
 347
 348                         if (is_ohci_port(pdata->port_mode[i])) {
 349                                 reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
 350                                 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
 351                                 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
 352                         } else if (pdata->port_mode[i] ==
 353                                         OMAP_EHCI_PORT_MODE_TLL) {
 354                                 /*
 355                                  * Disable UTMI AutoIdle, BitStuffing
 356                                  * and use SDR Mode. Enable ULPI AutoIdle.
 357                                  */
 358                                 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
 359                                         | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
 360                                 reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
 361                                 reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE;
 362                         } else if (pdata->port_mode[i] ==
 363                                         OMAP_EHCI_PORT_MODE_HSIC) {
 364                                 /*
 365                                  * HSIC Mode requires UTMI port configurations
 366                                  */
 367                                 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
 368                                  | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
 369                                  | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
 370                                  | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
 371                         } else {
 372                                 continue;
 373                         }
 374                         reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
 375                         usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
 376
 377                         usbtll_writeb(base,
 378                                       OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
 379                                       0xbe);
 380                 }
 381         }
 382
 383         spin_unlock(&tll_lock);
 384         pm_runtime_put_sync(tll_dev);
 385
 386         return 0;
 387 }
 388 EXPORT_SYMBOL_GPL(omap_tll_init);
 389
 390 int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
 391 {
 392         int i;
 393         struct usbtll_omap *tll;
 394
 395         if (!tll_dev)
 396                 return -ENODEV;
 397
 398         pm_runtime_get_sync(tll_dev);
 399
 400         spin_lock(&tll_lock);
 401         tll = dev_get_drvdata(tll_dev);
 402
 403         for (i = 0; i < tll->nch; i++) {
 404                 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 405                         int r;
 406
 407                         if (IS_ERR(tll->ch_clk[i]))
 408                                 continue;
 409
 410                         r = clk_enable(tll->ch_clk[i]);
 411                         if (r) {
 412                                 dev_err(tll_dev,
 413                                  "Error enabling ch %d clock: %d\n", i, r);
 414                         }
 415                 }
 416         }
 417
 418         spin_unlock(&tll_lock);
 419
 420         return 0;
 421 }
 422 EXPORT_SYMBOL_GPL(omap_tll_enable);
 423
 424 int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 425 {
 426         int i;
 427         struct usbtll_omap *tll;
 428
 429         if (!tll_dev)
 430                 return -ENODEV;
 431
 432         spin_lock(&tll_lock);
 433         tll = dev_get_drvdata(tll_dev);
 434
 435         for (i = 0; i < tll->nch; i++) {
 436                 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 437                         if (!IS_ERR(tll->ch_clk[i]))
 438                                 clk_disable(tll->ch_clk[i]);
 439                 }
 440         }
 441
 442         spin_unlock(&tll_lock);
 443         pm_runtime_put_sync(tll_dev);
 444
 445         return 0;
 446 }
 447 EXPORT_SYMBOL_GPL(omap_tll_disable);
 448
 449 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
 450 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 451 MODULE_LICENSE("GPL v2");
 452 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
 453
 454 static int __init omap_usbtll_drvinit(void)
 455 {
 456         return platform_driver_register(&usbtll_omap_driver);
 457 }
 458
 459 /*
 460  * init before usbhs core driver;
 461  * The usbtll driver should be initialized before
 462  * the usbhs core driver probe function is called.
 463  */
 464 fs_initcall(omap_usbtll_drvinit);
 465
 466 static void __exit omap_usbtll_drvexit(void)
 467 {
 468         platform_driver_unregister(&usbtll_omap_driver);
 469 }
 470 module_exit(omap_usbtll_drvexit);