gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / misc / hpilo.h
blob1aa433a7f66c188df98e4d64cccaaf58c047e6c4
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * linux/drivers/char/hpilo.h
5 * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
6 * David Altobelli <david.altobelli@hp.com>
7 */
8 #ifndef __HPILO_H
9 #define __HPILO_H
11 #define ILO_NAME "hpilo"
13 /* max number of open channel control blocks per device, hw limited to 32 */
14 #define MAX_CCB 24
15 /* min number of open channel control blocks per device, hw limited to 32 */
16 #define MIN_CCB 8
17 /* max number of supported devices */
18 #define MAX_ILO_DEV 1
19 /* max number of files */
20 #define MAX_OPEN (MAX_CCB * MAX_ILO_DEV)
21 /* total wait time in usec */
22 #define MAX_WAIT_TIME 10000
23 /* per spin wait time in usec */
24 #define WAIT_TIME 10
25 /* spin counter for open/close delay */
26 #define MAX_WAIT (MAX_WAIT_TIME / WAIT_TIME)
29 * Per device, used to track global memory allocations.
31 struct ilo_hwinfo {
32 /* mmio registers on device */
33 char __iomem *mmio_vaddr;
35 /* doorbell registers on device */
36 char __iomem *db_vaddr;
38 /* shared memory on device used for channel control blocks */
39 char __iomem *ram_vaddr;
41 /* files corresponding to this device */
42 struct ccb_data *ccb_alloc[MAX_CCB];
44 struct pci_dev *ilo_dev;
47 * open_lock serializes ccb_cnt during open and close
48 * [ irq disabled ]
49 * -> alloc_lock used when adding/removing/searching ccb_alloc,
50 * which represents all ccbs open on the device
51 * --> fifo_lock controls access to fifo queues shared with hw
53 * Locks must be taken in this order, but open_lock and alloc_lock
54 * are optional, they do not need to be held in order to take a
55 * lower level lock.
57 spinlock_t open_lock;
58 spinlock_t alloc_lock;
59 spinlock_t fifo_lock;
61 struct cdev cdev;
64 /* offset from mmio_vaddr for enabling doorbell interrupts */
65 #define DB_IRQ 0xB2
66 /* offset from mmio_vaddr for outbound communications */
67 #define DB_OUT 0xD4
68 /* DB_OUT reset bit */
69 #define DB_RESET 26
72 * Channel control block. Used to manage hardware queues.
73 * The format must match hw's version. The hw ccb is 128 bytes,
74 * but the context area shouldn't be touched by the driver.
76 #define ILOSW_CCB_SZ 64
77 #define ILOHW_CCB_SZ 128
78 struct ccb {
79 union {
80 char *send_fifobar;
81 u64 send_fifobar_pa;
82 } ccb_u1;
83 union {
84 char *send_desc;
85 u64 send_desc_pa;
86 } ccb_u2;
87 u64 send_ctrl;
89 union {
90 char *recv_fifobar;
91 u64 recv_fifobar_pa;
92 } ccb_u3;
93 union {
94 char *recv_desc;
95 u64 recv_desc_pa;
96 } ccb_u4;
97 u64 recv_ctrl;
99 union {
100 char __iomem *db_base;
101 u64 padding5;
102 } ccb_u5;
104 u64 channel;
106 /* unused context area (64 bytes) */
109 /* ccb queue parameters */
110 #define SENDQ 1
111 #define RECVQ 2
112 #define NR_QENTRY 4
113 #define L2_QENTRY_SZ 12
115 /* ccb ctrl bitfields */
116 #define CTRL_BITPOS_L2SZ 0
117 #define CTRL_BITPOS_FIFOINDEXMASK 4
118 #define CTRL_BITPOS_DESCLIMIT 18
119 #define CTRL_BITPOS_A 30
120 #define CTRL_BITPOS_G 31
122 /* ccb doorbell macros */
123 #define L2_DB_SIZE 14
124 #define ONE_DB_SIZE (1 << L2_DB_SIZE)
127 * Per fd structure used to track the ccb allocated to that dev file.
129 struct ccb_data {
130 /* software version of ccb, using virtual addrs */
131 struct ccb driver_ccb;
133 /* hardware version of ccb, using physical addrs */
134 struct ccb ilo_ccb;
136 /* hardware ccb is written to this shared mapped device memory */
137 struct ccb __iomem *mapped_ccb;
139 /* dma'able memory used for send/recv queues */
140 void *dma_va;
141 dma_addr_t dma_pa;
142 size_t dma_size;
144 /* pointer to hardware device info */
145 struct ilo_hwinfo *ilo_hw;
147 /* queue for this ccb to wait for recv data */
148 wait_queue_head_t ccb_waitq;
150 /* usage count, to allow for shared ccb's */
151 int ccb_cnt;
153 /* open wanted exclusive access to this ccb */
154 int ccb_excl;
158 * FIFO queue structure, shared with hw.
160 #define ILO_START_ALIGN 4096
161 #define ILO_CACHE_SZ 128
162 struct fifo {
163 u64 nrents; /* user requested number of fifo entries */
164 u64 imask; /* mask to extract valid fifo index */
165 u64 merge; /* O/C bits to merge in during enqueue operation */
166 u64 reset; /* set to non-zero when the target device resets */
167 u8 pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)];
169 u64 head;
170 u8 pad_1[ILO_CACHE_SZ - (sizeof(u64))];
172 u64 tail;
173 u8 pad_2[ILO_CACHE_SZ - (sizeof(u64))];
175 u64 fifobar[1];
178 /* convert between struct fifo, and the fifobar, which is saved in the ccb */
179 #define FIFOHANDLESIZE (sizeof(struct fifo) - sizeof(u64))
180 #define FIFOBARTOHANDLE(_fifo) \
181 ((struct fifo *)(((char *)(_fifo)) - FIFOHANDLESIZE))
183 /* the number of qwords to consume from the entry descriptor */
184 #define ENTRY_BITPOS_QWORDS 0
185 /* descriptor index number (within a specified queue) */
186 #define ENTRY_BITPOS_DESCRIPTOR 10
187 /* state bit, fifo entry consumed by consumer */
188 #define ENTRY_BITPOS_C 22
189 /* state bit, fifo entry is occupied */
190 #define ENTRY_BITPOS_O 23
192 #define ENTRY_BITS_QWORDS 10
193 #define ENTRY_BITS_DESCRIPTOR 12
194 #define ENTRY_BITS_C 1
195 #define ENTRY_BITS_O 1
196 #define ENTRY_BITS_TOTAL \
197 (ENTRY_BITS_C + ENTRY_BITS_O + \
198 ENTRY_BITS_QWORDS + ENTRY_BITS_DESCRIPTOR)
200 /* extract various entry fields */
201 #define ENTRY_MASK ((1 << ENTRY_BITS_TOTAL) - 1)
202 #define ENTRY_MASK_C (((1 << ENTRY_BITS_C) - 1) << ENTRY_BITPOS_C)
203 #define ENTRY_MASK_O (((1 << ENTRY_BITS_O) - 1) << ENTRY_BITPOS_O)
204 #define ENTRY_MASK_QWORDS \
205 (((1 << ENTRY_BITS_QWORDS) - 1) << ENTRY_BITPOS_QWORDS)
206 #define ENTRY_MASK_DESCRIPTOR \
207 (((1 << ENTRY_BITS_DESCRIPTOR) - 1) << ENTRY_BITPOS_DESCRIPTOR)
209 #define ENTRY_MASK_NOSTATE (ENTRY_MASK >> (ENTRY_BITS_C + ENTRY_BITS_O))
211 #endif /* __HPILO_H */