2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
14 * and probably many L2 switches ...
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/fcntl.h>
38 #include <linux/interrupt.h>
39 #include <linux/ptrace.h>
40 #include <linux/ioport.h>
44 #include <linux/icmp.h>
45 #include <linux/icmpv6.h>
46 #include <linux/tcp.h>
47 #include <linux/udp.h>
48 #include <linux/slab.h>
49 #include <linux/string.h>
50 #include <linux/init.h>
51 #include <linux/timer.h>
52 #include <linux/socket.h>
53 #include <linux/ctype.h>
54 #include <linux/inet.h>
55 #include <linux/bitops.h>
58 #include <linux/uaccess.h>
59 #include <linux/errno.h>
60 #include <linux/netdevice.h>
61 #include <linux/inetdevice.h>
62 #include <linux/igmp.h>
63 #include <linux/etherdevice.h>
64 #include <linux/skbuff.h>
66 #include <linux/rtnetlink.h>
67 #include <linux/smp.h>
68 #include <linux/if_ether.h>
70 #include <linux/mii.h>
71 #include <linux/ethtool.h>
72 #include <linux/if_vlan.h>
73 #include <linux/if_bonding.h>
74 #include <linux/jiffies.h>
75 #include <linux/preempt.h>
76 #include <net/route.h>
77 #include <net/net_namespace.h>
78 #include <net/netns/generic.h>
79 #include <net/pkt_sched.h>
80 #include <linux/rculist.h>
81 #include <net/flow_dissector.h>
82 #include <net/bonding.h>
83 #include <net/bond_3ad.h>
84 #include <net/bond_alb.h>
86 #include "bonding_priv.h"
88 /*---------------------------- Module parameters ----------------------------*/
90 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
92 static int max_bonds
= BOND_DEFAULT_MAX_BONDS
;
93 static int tx_queues
= BOND_DEFAULT_TX_QUEUES
;
94 static int num_peer_notif
= 1;
98 static int use_carrier
= 1;
100 static char *primary
;
101 static char *primary_reselect
;
102 static char *lacp_rate
;
103 static int min_links
;
104 static char *ad_select
;
105 static char *xmit_hash_policy
;
106 static int arp_interval
;
107 static char *arp_ip_target
[BOND_MAX_ARP_TARGETS
];
108 static char *arp_validate
;
109 static char *arp_all_targets
;
110 static char *fail_over_mac
;
111 static int all_slaves_active
;
112 static struct bond_params bonding_defaults
;
113 static int resend_igmp
= BOND_DEFAULT_RESEND_IGMP
;
114 static int packets_per_slave
= 1;
115 static int lp_interval
= BOND_ALB_DEFAULT_LP_INTERVAL
;
117 module_param(max_bonds
, int, 0);
118 MODULE_PARM_DESC(max_bonds
, "Max number of bonded devices");
119 module_param(tx_queues
, int, 0);
120 MODULE_PARM_DESC(tx_queues
, "Max number of transmit queues (default = 16)");
121 module_param_named(num_grat_arp
, num_peer_notif
, int, 0644);
122 MODULE_PARM_DESC(num_grat_arp
, "Number of peer notifications to send on "
123 "failover event (alias of num_unsol_na)");
124 module_param_named(num_unsol_na
, num_peer_notif
, int, 0644);
125 MODULE_PARM_DESC(num_unsol_na
, "Number of peer notifications to send on "
126 "failover event (alias of num_grat_arp)");
127 module_param(miimon
, int, 0);
128 MODULE_PARM_DESC(miimon
, "Link check interval in milliseconds");
129 module_param(updelay
, int, 0);
130 MODULE_PARM_DESC(updelay
, "Delay before considering link up, in milliseconds");
131 module_param(downdelay
, int, 0);
132 MODULE_PARM_DESC(downdelay
, "Delay before considering link down, "
134 module_param(use_carrier
, int, 0);
135 MODULE_PARM_DESC(use_carrier
, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
136 "0 for off, 1 for on (default)");
137 module_param(mode
, charp
, 0);
138 MODULE_PARM_DESC(mode
, "Mode of operation; 0 for balance-rr, "
139 "1 for active-backup, 2 for balance-xor, "
140 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
141 "6 for balance-alb");
142 module_param(primary
, charp
, 0);
143 MODULE_PARM_DESC(primary
, "Primary network device to use");
144 module_param(primary_reselect
, charp
, 0);
145 MODULE_PARM_DESC(primary_reselect
, "Reselect primary slave "
147 "0 for always (default), "
148 "1 for only if speed of primary is "
150 "2 for only on active slave "
152 module_param(lacp_rate
, charp
, 0);
153 MODULE_PARM_DESC(lacp_rate
, "LACPDU tx rate to request from 802.3ad partner; "
154 "0 for slow, 1 for fast");
155 module_param(ad_select
, charp
, 0);
156 MODULE_PARM_DESC(ad_select
, "802.3ad aggregation selection logic; "
157 "0 for stable (default), 1 for bandwidth, "
159 module_param(min_links
, int, 0);
160 MODULE_PARM_DESC(min_links
, "Minimum number of available links before turning on carrier");
162 module_param(xmit_hash_policy
, charp
, 0);
163 MODULE_PARM_DESC(xmit_hash_policy
, "balance-alb, balance-tlb, balance-xor, 802.3ad hashing method; "
164 "0 for layer 2 (default), 1 for layer 3+4, "
165 "2 for layer 2+3, 3 for encap layer 2+3, "
166 "4 for encap layer 3+4");
167 module_param(arp_interval
, int, 0);
168 MODULE_PARM_DESC(arp_interval
, "arp interval in milliseconds");
169 module_param_array(arp_ip_target
, charp
, NULL
, 0);
170 MODULE_PARM_DESC(arp_ip_target
, "arp targets in n.n.n.n form");
171 module_param(arp_validate
, charp
, 0);
172 MODULE_PARM_DESC(arp_validate
, "validate src/dst of ARP probes; "
173 "0 for none (default), 1 for active, "
174 "2 for backup, 3 for all");
175 module_param(arp_all_targets
, charp
, 0);
176 MODULE_PARM_DESC(arp_all_targets
, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
177 module_param(fail_over_mac
, charp
, 0);
178 MODULE_PARM_DESC(fail_over_mac
, "For active-backup, do not set all slaves to "
179 "the same MAC; 0 for none (default), "
180 "1 for active, 2 for follow");
181 module_param(all_slaves_active
, int, 0);
182 MODULE_PARM_DESC(all_slaves_active
, "Keep all frames received on an interface "
183 "by setting active flag for all slaves; "
184 "0 for never (default), 1 for always.");
185 module_param(resend_igmp
, int, 0);
186 MODULE_PARM_DESC(resend_igmp
, "Number of IGMP membership reports to send on "
188 module_param(packets_per_slave
, int, 0);
189 MODULE_PARM_DESC(packets_per_slave
, "Packets to send per slave in balance-rr "
190 "mode; 0 for a random slave, 1 packet per "
191 "slave (default), >1 packets per slave.");
192 module_param(lp_interval
, uint
, 0);
193 MODULE_PARM_DESC(lp_interval
, "The number of seconds between instances where "
194 "the bonding driver sends learning packets to "
195 "each slaves peer switch. The default is 1.");
197 /*----------------------------- Global variables ----------------------------*/
199 #ifdef CONFIG_NET_POLL_CONTROLLER
200 atomic_t netpoll_block_tx
= ATOMIC_INIT(0);
203 unsigned int bond_net_id __read_mostly
;
205 static const struct flow_dissector_key flow_keys_bonding_keys
[] = {
207 .key_id
= FLOW_DISSECTOR_KEY_CONTROL
,
208 .offset
= offsetof(struct flow_keys
, control
),
211 .key_id
= FLOW_DISSECTOR_KEY_BASIC
,
212 .offset
= offsetof(struct flow_keys
, basic
),
215 .key_id
= FLOW_DISSECTOR_KEY_IPV4_ADDRS
,
216 .offset
= offsetof(struct flow_keys
, addrs
.v4addrs
),
219 .key_id
= FLOW_DISSECTOR_KEY_IPV6_ADDRS
,
220 .offset
= offsetof(struct flow_keys
, addrs
.v6addrs
),
223 .key_id
= FLOW_DISSECTOR_KEY_TIPC
,
224 .offset
= offsetof(struct flow_keys
, addrs
.tipckey
),
227 .key_id
= FLOW_DISSECTOR_KEY_PORTS
,
228 .offset
= offsetof(struct flow_keys
, ports
),
231 .key_id
= FLOW_DISSECTOR_KEY_ICMP
,
232 .offset
= offsetof(struct flow_keys
, icmp
),
235 .key_id
= FLOW_DISSECTOR_KEY_VLAN
,
236 .offset
= offsetof(struct flow_keys
, vlan
),
239 .key_id
= FLOW_DISSECTOR_KEY_FLOW_LABEL
,
240 .offset
= offsetof(struct flow_keys
, tags
),
243 .key_id
= FLOW_DISSECTOR_KEY_GRE_KEYID
,
244 .offset
= offsetof(struct flow_keys
, keyid
),
248 static struct flow_dissector flow_keys_bonding __read_mostly
;
250 /*-------------------------- Forward declarations ---------------------------*/
252 static int bond_init(struct net_device
*bond_dev
);
253 static void bond_uninit(struct net_device
*bond_dev
);
254 static void bond_get_stats(struct net_device
*bond_dev
,
255 struct rtnl_link_stats64
*stats
);
256 static void bond_slave_arr_handler(struct work_struct
*work
);
257 static bool bond_time_in_interval(struct bonding
*bond
, unsigned long last_act
,
259 static void bond_netdev_notify_work(struct work_struct
*work
);
261 /*---------------------------- General routines -----------------------------*/
263 const char *bond_mode_name(int mode
)
265 static const char *names
[] = {
266 [BOND_MODE_ROUNDROBIN
] = "load balancing (round-robin)",
267 [BOND_MODE_ACTIVEBACKUP
] = "fault-tolerance (active-backup)",
268 [BOND_MODE_XOR
] = "load balancing (xor)",
269 [BOND_MODE_BROADCAST
] = "fault-tolerance (broadcast)",
270 [BOND_MODE_8023AD
] = "IEEE 802.3ad Dynamic link aggregation",
271 [BOND_MODE_TLB
] = "transmit load balancing",
272 [BOND_MODE_ALB
] = "adaptive load balancing",
275 if (mode
< BOND_MODE_ROUNDROBIN
|| mode
> BOND_MODE_ALB
)
281 /*---------------------------------- VLAN -----------------------------------*/
284 * bond_dev_queue_xmit - Prepare skb for xmit.
286 * @bond: bond device that got this skb for tx.
287 * @skb: hw accel VLAN tagged skb to transmit
288 * @slave_dev: slave that is supposed to xmit this skbuff
290 void bond_dev_queue_xmit(struct bonding
*bond
, struct sk_buff
*skb
,
291 struct net_device
*slave_dev
)
293 skb
->dev
= slave_dev
;
295 BUILD_BUG_ON(sizeof(skb
->queue_mapping
) !=
296 sizeof(qdisc_skb_cb(skb
)->slave_dev_queue_mapping
));
297 skb_set_queue_mapping(skb
, qdisc_skb_cb(skb
)->slave_dev_queue_mapping
);
299 if (unlikely(netpoll_tx_running(bond
->dev
)))
300 bond_netpoll_send_skb(bond_get_slave_by_dev(bond
, slave_dev
), skb
);
305 /* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
306 * We don't protect the slave list iteration with a lock because:
307 * a. This operation is performed in IOCTL context,
308 * b. The operation is protected by the RTNL semaphore in the 8021q code,
309 * c. Holding a lock with BH disabled while directly calling a base driver
310 * entry point is generally a BAD idea.
312 * The design of synchronization/protection for this operation in the 8021q
313 * module is good for one or more VLAN devices over a single physical device
314 * and cannot be extended for a teaming solution like bonding, so there is a
315 * potential race condition here where a net device from the vlan group might
316 * be referenced (either by a base driver or the 8021q code) while it is being
317 * removed from the system. However, it turns out we're not making matters
318 * worse, and if it works for regular VLAN usage it will work here too.
322 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
323 * @bond_dev: bonding net device that got called
324 * @vid: vlan id being added
326 static int bond_vlan_rx_add_vid(struct net_device
*bond_dev
,
327 __be16 proto
, u16 vid
)
329 struct bonding
*bond
= netdev_priv(bond_dev
);
330 struct slave
*slave
, *rollback_slave
;
331 struct list_head
*iter
;
334 bond_for_each_slave(bond
, slave
, iter
) {
335 res
= vlan_vid_add(slave
->dev
, proto
, vid
);
343 /* unwind to the slave that failed */
344 bond_for_each_slave(bond
, rollback_slave
, iter
) {
345 if (rollback_slave
== slave
)
348 vlan_vid_del(rollback_slave
->dev
, proto
, vid
);
355 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
356 * @bond_dev: bonding net device that got called
357 * @vid: vlan id being removed
359 static int bond_vlan_rx_kill_vid(struct net_device
*bond_dev
,
360 __be16 proto
, u16 vid
)
362 struct bonding
*bond
= netdev_priv(bond_dev
);
363 struct list_head
*iter
;
366 bond_for_each_slave(bond
, slave
, iter
)
367 vlan_vid_del(slave
->dev
, proto
, vid
);
369 if (bond_is_lb(bond
))
370 bond_alb_clear_vlan(bond
, vid
);
375 /*------------------------------- Link status -------------------------------*/
377 /* Set the carrier state for the master according to the state of its
378 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
379 * do special 802.3ad magic.
381 * Returns zero if carrier state does not change, nonzero if it does.
383 int bond_set_carrier(struct bonding
*bond
)
385 struct list_head
*iter
;
388 if (!bond_has_slaves(bond
))
391 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
392 return bond_3ad_set_carrier(bond
);
394 bond_for_each_slave(bond
, slave
, iter
) {
395 if (slave
->link
== BOND_LINK_UP
) {
396 if (!netif_carrier_ok(bond
->dev
)) {
397 netif_carrier_on(bond
->dev
);
405 if (netif_carrier_ok(bond
->dev
)) {
406 netif_carrier_off(bond
->dev
);
412 /* Get link speed and duplex from the slave's base driver
413 * using ethtool. If for some reason the call fails or the
414 * values are invalid, set speed and duplex to -1,
415 * and return. Return 1 if speed or duplex settings are
416 * UNKNOWN; 0 otherwise.
418 static int bond_update_speed_duplex(struct slave
*slave
)
420 struct net_device
*slave_dev
= slave
->dev
;
421 struct ethtool_link_ksettings ecmd
;
424 slave
->speed
= SPEED_UNKNOWN
;
425 slave
->duplex
= DUPLEX_UNKNOWN
;
427 res
= __ethtool_get_link_ksettings(slave_dev
, &ecmd
);
430 if (ecmd
.base
.speed
== 0 || ecmd
.base
.speed
== ((__u32
)-1))
432 switch (ecmd
.base
.duplex
) {
440 slave
->speed
= ecmd
.base
.speed
;
441 slave
->duplex
= ecmd
.base
.duplex
;
446 const char *bond_slave_link_status(s8 link
)
462 /* if <dev> supports MII link status reporting, check its link status.
464 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
465 * depending upon the setting of the use_carrier parameter.
467 * Return either BMSR_LSTATUS, meaning that the link is up (or we
468 * can't tell and just pretend it is), or 0, meaning that the link is
471 * If reporting is non-zero, instead of faking link up, return -1 if
472 * both ETHTOOL and MII ioctls fail (meaning the device does not
473 * support them). If use_carrier is set, return whatever it says.
474 * It'd be nice if there was a good way to tell if a driver supports
475 * netif_carrier, but there really isn't.
477 static int bond_check_dev_link(struct bonding
*bond
,
478 struct net_device
*slave_dev
, int reporting
)
480 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
481 int (*ioctl
)(struct net_device
*, struct ifreq
*, int);
483 struct mii_ioctl_data
*mii
;
485 if (!reporting
&& !netif_running(slave_dev
))
488 if (bond
->params
.use_carrier
)
489 return netif_carrier_ok(slave_dev
) ? BMSR_LSTATUS
: 0;
491 /* Try to get link status using Ethtool first. */
492 if (slave_dev
->ethtool_ops
->get_link
)
493 return slave_dev
->ethtool_ops
->get_link(slave_dev
) ?
496 /* Ethtool can't be used, fallback to MII ioctls. */
497 ioctl
= slave_ops
->ndo_do_ioctl
;
499 /* TODO: set pointer to correct ioctl on a per team member
500 * bases to make this more efficient. that is, once
501 * we determine the correct ioctl, we will always
502 * call it and not the others for that team
506 /* We cannot assume that SIOCGMIIPHY will also read a
507 * register; not all network drivers (e.g., e100)
511 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
512 strncpy(ifr
.ifr_name
, slave_dev
->name
, IFNAMSIZ
);
514 if (ioctl(slave_dev
, &ifr
, SIOCGMIIPHY
) == 0) {
515 mii
->reg_num
= MII_BMSR
;
516 if (ioctl(slave_dev
, &ifr
, SIOCGMIIREG
) == 0)
517 return mii
->val_out
& BMSR_LSTATUS
;
521 /* If reporting, report that either there's no dev->do_ioctl,
522 * or both SIOCGMIIREG and get_link failed (meaning that we
523 * cannot report link status). If not reporting, pretend
526 return reporting
? -1 : BMSR_LSTATUS
;
529 /*----------------------------- Multicast list ------------------------------*/
531 /* Push the promiscuity flag down to appropriate slaves */
532 static int bond_set_promiscuity(struct bonding
*bond
, int inc
)
534 struct list_head
*iter
;
537 if (bond_uses_primary(bond
)) {
538 struct slave
*curr_active
= rtnl_dereference(bond
->curr_active_slave
);
541 err
= dev_set_promiscuity(curr_active
->dev
, inc
);
545 bond_for_each_slave(bond
, slave
, iter
) {
546 err
= dev_set_promiscuity(slave
->dev
, inc
);
554 /* Push the allmulti flag down to all slaves */
555 static int bond_set_allmulti(struct bonding
*bond
, int inc
)
557 struct list_head
*iter
;
560 if (bond_uses_primary(bond
)) {
561 struct slave
*curr_active
= rtnl_dereference(bond
->curr_active_slave
);
564 err
= dev_set_allmulti(curr_active
->dev
, inc
);
568 bond_for_each_slave(bond
, slave
, iter
) {
569 err
= dev_set_allmulti(slave
->dev
, inc
);
577 /* Retrieve the list of registered multicast addresses for the bonding
578 * device and retransmit an IGMP JOIN request to the current active
581 static void bond_resend_igmp_join_requests_delayed(struct work_struct
*work
)
583 struct bonding
*bond
= container_of(work
, struct bonding
,
586 if (!rtnl_trylock()) {
587 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, 1);
590 call_netdevice_notifiers(NETDEV_RESEND_IGMP
, bond
->dev
);
592 if (bond
->igmp_retrans
> 1) {
593 bond
->igmp_retrans
--;
594 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, HZ
/5);
599 /* Flush bond's hardware addresses from slave */
600 static void bond_hw_addr_flush(struct net_device
*bond_dev
,
601 struct net_device
*slave_dev
)
603 struct bonding
*bond
= netdev_priv(bond_dev
);
605 dev_uc_unsync(slave_dev
, bond_dev
);
606 dev_mc_unsync(slave_dev
, bond_dev
);
608 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
609 /* del lacpdu mc addr from mc list */
610 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
612 dev_mc_del(slave_dev
, lacpdu_multicast
);
616 /*--------------------------- Active slave change ---------------------------*/
618 /* Update the hardware address list and promisc/allmulti for the new and
619 * old active slaves (if any). Modes that are not using primary keep all
620 * slaves up date at all times; only the modes that use primary need to call
621 * this function to swap these settings during a failover.
623 static void bond_hw_addr_swap(struct bonding
*bond
, struct slave
*new_active
,
624 struct slave
*old_active
)
627 if (bond
->dev
->flags
& IFF_PROMISC
)
628 dev_set_promiscuity(old_active
->dev
, -1);
630 if (bond
->dev
->flags
& IFF_ALLMULTI
)
631 dev_set_allmulti(old_active
->dev
, -1);
633 bond_hw_addr_flush(bond
->dev
, old_active
->dev
);
637 /* FIXME: Signal errors upstream. */
638 if (bond
->dev
->flags
& IFF_PROMISC
)
639 dev_set_promiscuity(new_active
->dev
, 1);
641 if (bond
->dev
->flags
& IFF_ALLMULTI
)
642 dev_set_allmulti(new_active
->dev
, 1);
644 netif_addr_lock_bh(bond
->dev
);
645 dev_uc_sync(new_active
->dev
, bond
->dev
);
646 dev_mc_sync(new_active
->dev
, bond
->dev
);
647 netif_addr_unlock_bh(bond
->dev
);
652 * bond_set_dev_addr - clone slave's address to bond
653 * @bond_dev: bond net device
654 * @slave_dev: slave net device
656 * Should be called with RTNL held.
658 static int bond_set_dev_addr(struct net_device
*bond_dev
,
659 struct net_device
*slave_dev
)
663 slave_dbg(bond_dev
, slave_dev
, "bond_dev=%p slave_dev=%p slave_dev->addr_len=%d\n",
664 bond_dev
, slave_dev
, slave_dev
->addr_len
);
665 err
= dev_pre_changeaddr_notify(bond_dev
, slave_dev
->dev_addr
, NULL
);
669 memcpy(bond_dev
->dev_addr
, slave_dev
->dev_addr
, slave_dev
->addr_len
);
670 bond_dev
->addr_assign_type
= NET_ADDR_STOLEN
;
671 call_netdevice_notifiers(NETDEV_CHANGEADDR
, bond_dev
);
675 static struct slave
*bond_get_old_active(struct bonding
*bond
,
676 struct slave
*new_active
)
679 struct list_head
*iter
;
681 bond_for_each_slave(bond
, slave
, iter
) {
682 if (slave
== new_active
)
685 if (ether_addr_equal(bond
->dev
->dev_addr
, slave
->dev
->dev_addr
))
692 /* bond_do_fail_over_mac
694 * Perform special MAC address swapping for fail_over_mac settings
698 static void bond_do_fail_over_mac(struct bonding
*bond
,
699 struct slave
*new_active
,
700 struct slave
*old_active
)
702 u8 tmp_mac
[MAX_ADDR_LEN
];
703 struct sockaddr_storage ss
;
706 switch (bond
->params
.fail_over_mac
) {
707 case BOND_FOM_ACTIVE
:
709 rv
= bond_set_dev_addr(bond
->dev
, new_active
->dev
);
711 slave_err(bond
->dev
, new_active
->dev
, "Error %d setting bond MAC from slave\n",
715 case BOND_FOM_FOLLOW
:
716 /* if new_active && old_active, swap them
717 * if just old_active, do nothing (going to no active slave)
718 * if just new_active, set new_active to bond's MAC
724 old_active
= bond_get_old_active(bond
, new_active
);
727 bond_hw_addr_copy(tmp_mac
, new_active
->dev
->dev_addr
,
728 new_active
->dev
->addr_len
);
729 bond_hw_addr_copy(ss
.__data
,
730 old_active
->dev
->dev_addr
,
731 old_active
->dev
->addr_len
);
732 ss
.ss_family
= new_active
->dev
->type
;
734 bond_hw_addr_copy(ss
.__data
, bond
->dev
->dev_addr
,
735 bond
->dev
->addr_len
);
736 ss
.ss_family
= bond
->dev
->type
;
739 rv
= dev_set_mac_address(new_active
->dev
,
740 (struct sockaddr
*)&ss
, NULL
);
742 slave_err(bond
->dev
, new_active
->dev
, "Error %d setting MAC of new active slave\n",
750 bond_hw_addr_copy(ss
.__data
, tmp_mac
,
751 new_active
->dev
->addr_len
);
752 ss
.ss_family
= old_active
->dev
->type
;
754 rv
= dev_set_mac_address(old_active
->dev
,
755 (struct sockaddr
*)&ss
, NULL
);
757 slave_err(bond
->dev
, old_active
->dev
, "Error %d setting MAC of old active slave\n",
762 netdev_err(bond
->dev
, "bond_do_fail_over_mac impossible: bad policy %d\n",
763 bond
->params
.fail_over_mac
);
769 static struct slave
*bond_choose_primary_or_current(struct bonding
*bond
)
771 struct slave
*prim
= rtnl_dereference(bond
->primary_slave
);
772 struct slave
*curr
= rtnl_dereference(bond
->curr_active_slave
);
774 if (!prim
|| prim
->link
!= BOND_LINK_UP
) {
775 if (!curr
|| curr
->link
!= BOND_LINK_UP
)
780 if (bond
->force_primary
) {
781 bond
->force_primary
= false;
785 if (!curr
|| curr
->link
!= BOND_LINK_UP
)
788 /* At this point, prim and curr are both up */
789 switch (bond
->params
.primary_reselect
) {
790 case BOND_PRI_RESELECT_ALWAYS
:
792 case BOND_PRI_RESELECT_BETTER
:
793 if (prim
->speed
< curr
->speed
)
795 if (prim
->speed
== curr
->speed
&& prim
->duplex
<= curr
->duplex
)
798 case BOND_PRI_RESELECT_FAILURE
:
801 netdev_err(bond
->dev
, "impossible primary_reselect %d\n",
802 bond
->params
.primary_reselect
);
808 * bond_find_best_slave - select the best available slave to be the active one
809 * @bond: our bonding struct
811 static struct slave
*bond_find_best_slave(struct bonding
*bond
)
813 struct slave
*slave
, *bestslave
= NULL
;
814 struct list_head
*iter
;
815 int mintime
= bond
->params
.updelay
;
817 slave
= bond_choose_primary_or_current(bond
);
821 bond_for_each_slave(bond
, slave
, iter
) {
822 if (slave
->link
== BOND_LINK_UP
)
824 if (slave
->link
== BOND_LINK_BACK
&& bond_slave_is_up(slave
) &&
825 slave
->delay
< mintime
) {
826 mintime
= slave
->delay
;
834 static bool bond_should_notify_peers(struct bonding
*bond
)
839 slave
= rcu_dereference(bond
->curr_active_slave
);
842 netdev_dbg(bond
->dev
, "bond_should_notify_peers: slave %s\n",
843 slave
? slave
->dev
->name
: "NULL");
845 if (!slave
|| !bond
->send_peer_notif
||
846 bond
->send_peer_notif
%
847 max(1, bond
->params
.peer_notif_delay
) != 0 ||
848 !netif_carrier_ok(bond
->dev
) ||
849 test_bit(__LINK_STATE_LINKWATCH_PENDING
, &slave
->dev
->state
))
856 * change_active_interface - change the active slave into the specified one
857 * @bond: our bonding struct
858 * @new: the new slave to make the active one
860 * Set the new slave to the bond's settings and unset them on the old
862 * Setting include flags, mc-list, promiscuity, allmulti, etc.
864 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
865 * because it is apparently the best available slave we have, even though its
866 * updelay hasn't timed out yet.
868 * Caller must hold RTNL.
870 void bond_change_active_slave(struct bonding
*bond
, struct slave
*new_active
)
872 struct slave
*old_active
;
876 old_active
= rtnl_dereference(bond
->curr_active_slave
);
878 if (old_active
== new_active
)
882 new_active
->last_link_up
= jiffies
;
884 if (new_active
->link
== BOND_LINK_BACK
) {
885 if (bond_uses_primary(bond
)) {
886 slave_info(bond
->dev
, new_active
->dev
, "making interface the new active one %d ms earlier\n",
887 (bond
->params
.updelay
- new_active
->delay
) * bond
->params
.miimon
);
890 new_active
->delay
= 0;
891 bond_set_slave_link_state(new_active
, BOND_LINK_UP
,
892 BOND_SLAVE_NOTIFY_NOW
);
894 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
895 bond_3ad_handle_link_change(new_active
, BOND_LINK_UP
);
897 if (bond_is_lb(bond
))
898 bond_alb_handle_link_change(bond
, new_active
, BOND_LINK_UP
);
900 if (bond_uses_primary(bond
)) {
901 slave_info(bond
->dev
, new_active
->dev
, "making interface the new active one\n");
906 if (bond_uses_primary(bond
))
907 bond_hw_addr_swap(bond
, new_active
, old_active
);
909 if (bond_is_lb(bond
)) {
910 bond_alb_handle_active_change(bond
, new_active
);
912 bond_set_slave_inactive_flags(old_active
,
913 BOND_SLAVE_NOTIFY_NOW
);
915 bond_set_slave_active_flags(new_active
,
916 BOND_SLAVE_NOTIFY_NOW
);
918 rcu_assign_pointer(bond
->curr_active_slave
, new_active
);
921 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
) {
923 bond_set_slave_inactive_flags(old_active
,
924 BOND_SLAVE_NOTIFY_NOW
);
927 bool should_notify_peers
= false;
929 bond_set_slave_active_flags(new_active
,
930 BOND_SLAVE_NOTIFY_NOW
);
932 if (bond
->params
.fail_over_mac
)
933 bond_do_fail_over_mac(bond
, new_active
,
936 if (netif_running(bond
->dev
)) {
937 bond
->send_peer_notif
=
938 bond
->params
.num_peer_notif
*
939 max(1, bond
->params
.peer_notif_delay
);
940 should_notify_peers
=
941 bond_should_notify_peers(bond
);
944 call_netdevice_notifiers(NETDEV_BONDING_FAILOVER
, bond
->dev
);
945 if (should_notify_peers
) {
946 bond
->send_peer_notif
--;
947 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
,
953 /* resend IGMP joins since active slave has changed or
954 * all were sent on curr_active_slave.
955 * resend only if bond is brought up with the affected
956 * bonding modes and the retransmission is enabled
958 if (netif_running(bond
->dev
) && (bond
->params
.resend_igmp
> 0) &&
959 ((bond_uses_primary(bond
) && new_active
) ||
960 BOND_MODE(bond
) == BOND_MODE_ROUNDROBIN
)) {
961 bond
->igmp_retrans
= bond
->params
.resend_igmp
;
962 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, 1);
967 * bond_select_active_slave - select a new active slave, if needed
968 * @bond: our bonding struct
970 * This functions should be called when one of the following occurs:
971 * - The old curr_active_slave has been released or lost its link.
972 * - The primary_slave has got its link back.
973 * - A slave has got its link back and there's no old curr_active_slave.
975 * Caller must hold RTNL.
977 void bond_select_active_slave(struct bonding
*bond
)
979 struct slave
*best_slave
;
984 best_slave
= bond_find_best_slave(bond
);
985 if (best_slave
!= rtnl_dereference(bond
->curr_active_slave
)) {
986 bond_change_active_slave(bond
, best_slave
);
987 rv
= bond_set_carrier(bond
);
991 if (netif_carrier_ok(bond
->dev
))
992 netdev_info(bond
->dev
, "active interface up!\n");
994 netdev_info(bond
->dev
, "now running without any active interface!\n");
998 #ifdef CONFIG_NET_POLL_CONTROLLER
999 static inline int slave_enable_netpoll(struct slave
*slave
)
1004 np
= kzalloc(sizeof(*np
), GFP_KERNEL
);
1009 err
= __netpoll_setup(np
, slave
->dev
);
1018 static inline void slave_disable_netpoll(struct slave
*slave
)
1020 struct netpoll
*np
= slave
->np
;
1030 static void bond_poll_controller(struct net_device
*bond_dev
)
1032 struct bonding
*bond
= netdev_priv(bond_dev
);
1033 struct slave
*slave
= NULL
;
1034 struct list_head
*iter
;
1035 struct ad_info ad_info
;
1037 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1038 if (bond_3ad_get_active_agg_info(bond
, &ad_info
))
1041 bond_for_each_slave_rcu(bond
, slave
, iter
) {
1042 if (!bond_slave_is_up(slave
))
1045 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1046 struct aggregator
*agg
=
1047 SLAVE_AD_INFO(slave
)->port
.aggregator
;
1050 agg
->aggregator_identifier
!= ad_info
.aggregator_id
)
1054 netpoll_poll_dev(slave
->dev
);
1058 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1060 struct bonding
*bond
= netdev_priv(bond_dev
);
1061 struct list_head
*iter
;
1062 struct slave
*slave
;
1064 bond_for_each_slave(bond
, slave
, iter
)
1065 if (bond_slave_is_up(slave
))
1066 slave_disable_netpoll(slave
);
1069 static int bond_netpoll_setup(struct net_device
*dev
, struct netpoll_info
*ni
)
1071 struct bonding
*bond
= netdev_priv(dev
);
1072 struct list_head
*iter
;
1073 struct slave
*slave
;
1076 bond_for_each_slave(bond
, slave
, iter
) {
1077 err
= slave_enable_netpoll(slave
);
1079 bond_netpoll_cleanup(dev
);
1086 static inline int slave_enable_netpoll(struct slave
*slave
)
1090 static inline void slave_disable_netpoll(struct slave
*slave
)
1093 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1098 /*---------------------------------- IOCTL ----------------------------------*/
1100 static netdev_features_t
bond_fix_features(struct net_device
*dev
,
1101 netdev_features_t features
)
1103 struct bonding
*bond
= netdev_priv(dev
);
1104 struct list_head
*iter
;
1105 netdev_features_t mask
;
1106 struct slave
*slave
;
1110 features
&= ~NETIF_F_ONE_FOR_ALL
;
1111 features
|= NETIF_F_ALL_FOR_ALL
;
1113 bond_for_each_slave(bond
, slave
, iter
) {
1114 features
= netdev_increment_features(features
,
1115 slave
->dev
->features
,
1118 features
= netdev_add_tso_features(features
, mask
);
1123 #define BOND_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1124 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
1125 NETIF_F_HIGHDMA | NETIF_F_LRO)
1127 #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1128 NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
1130 #define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1133 static void bond_compute_features(struct bonding
*bond
)
1135 unsigned int dst_release_flag
= IFF_XMIT_DST_RELEASE
|
1136 IFF_XMIT_DST_RELEASE_PERM
;
1137 netdev_features_t vlan_features
= BOND_VLAN_FEATURES
;
1138 netdev_features_t enc_features
= BOND_ENC_FEATURES
;
1139 netdev_features_t mpls_features
= BOND_MPLS_FEATURES
;
1140 struct net_device
*bond_dev
= bond
->dev
;
1141 struct list_head
*iter
;
1142 struct slave
*slave
;
1143 unsigned short max_hard_header_len
= ETH_HLEN
;
1144 unsigned int gso_max_size
= GSO_MAX_SIZE
;
1145 u16 gso_max_segs
= GSO_MAX_SEGS
;
1147 if (!bond_has_slaves(bond
))
1149 vlan_features
&= NETIF_F_ALL_FOR_ALL
;
1150 mpls_features
&= NETIF_F_ALL_FOR_ALL
;
1152 bond_for_each_slave(bond
, slave
, iter
) {
1153 vlan_features
= netdev_increment_features(vlan_features
,
1154 slave
->dev
->vlan_features
, BOND_VLAN_FEATURES
);
1156 enc_features
= netdev_increment_features(enc_features
,
1157 slave
->dev
->hw_enc_features
,
1160 mpls_features
= netdev_increment_features(mpls_features
,
1161 slave
->dev
->mpls_features
,
1162 BOND_MPLS_FEATURES
);
1164 dst_release_flag
&= slave
->dev
->priv_flags
;
1165 if (slave
->dev
->hard_header_len
> max_hard_header_len
)
1166 max_hard_header_len
= slave
->dev
->hard_header_len
;
1168 gso_max_size
= min(gso_max_size
, slave
->dev
->gso_max_size
);
1169 gso_max_segs
= min(gso_max_segs
, slave
->dev
->gso_max_segs
);
1171 bond_dev
->hard_header_len
= max_hard_header_len
;
1174 bond_dev
->vlan_features
= vlan_features
;
1175 bond_dev
->hw_enc_features
= enc_features
| NETIF_F_GSO_ENCAP_ALL
|
1176 NETIF_F_HW_VLAN_CTAG_TX
|
1177 NETIF_F_HW_VLAN_STAG_TX
|
1179 bond_dev
->mpls_features
= mpls_features
;
1180 bond_dev
->gso_max_segs
= gso_max_segs
;
1181 netif_set_gso_max_size(bond_dev
, gso_max_size
);
1183 bond_dev
->priv_flags
&= ~IFF_XMIT_DST_RELEASE
;
1184 if ((bond_dev
->priv_flags
& IFF_XMIT_DST_RELEASE_PERM
) &&
1185 dst_release_flag
== (IFF_XMIT_DST_RELEASE
| IFF_XMIT_DST_RELEASE_PERM
))
1186 bond_dev
->priv_flags
|= IFF_XMIT_DST_RELEASE
;
1188 netdev_change_features(bond_dev
);
1191 static void bond_setup_by_slave(struct net_device
*bond_dev
,
1192 struct net_device
*slave_dev
)
1194 bond_dev
->header_ops
= slave_dev
->header_ops
;
1196 bond_dev
->type
= slave_dev
->type
;
1197 bond_dev
->hard_header_len
= slave_dev
->hard_header_len
;
1198 bond_dev
->addr_len
= slave_dev
->addr_len
;
1200 memcpy(bond_dev
->broadcast
, slave_dev
->broadcast
,
1201 slave_dev
->addr_len
);
1204 /* On bonding slaves other than the currently active slave, suppress
1205 * duplicates except for alb non-mcast/bcast.
1207 static bool bond_should_deliver_exact_match(struct sk_buff
*skb
,
1208 struct slave
*slave
,
1209 struct bonding
*bond
)
1211 if (bond_is_slave_inactive(slave
)) {
1212 if (BOND_MODE(bond
) == BOND_MODE_ALB
&&
1213 skb
->pkt_type
!= PACKET_BROADCAST
&&
1214 skb
->pkt_type
!= PACKET_MULTICAST
)
1221 static rx_handler_result_t
bond_handle_frame(struct sk_buff
**pskb
)
1223 struct sk_buff
*skb
= *pskb
;
1224 struct slave
*slave
;
1225 struct bonding
*bond
;
1226 int (*recv_probe
)(const struct sk_buff
*, struct bonding
*,
1228 int ret
= RX_HANDLER_ANOTHER
;
1230 skb
= skb_share_check(skb
, GFP_ATOMIC
);
1232 return RX_HANDLER_CONSUMED
;
1236 slave
= bond_slave_get_rcu(skb
->dev
);
1239 recv_probe
= READ_ONCE(bond
->recv_probe
);
1241 ret
= recv_probe(skb
, bond
, slave
);
1242 if (ret
== RX_HANDLER_CONSUMED
) {
1249 * For packets determined by bond_should_deliver_exact_match() call to
1250 * be suppressed we want to make an exception for link-local packets.
1251 * This is necessary for e.g. LLDP daemons to be able to monitor
1252 * inactive slave links without being forced to bind to them
1255 * At the same time, packets that are passed to the bonding master
1256 * (including link-local ones) can have their originating interface
1257 * determined via PACKET_ORIGDEV socket option.
1259 if (bond_should_deliver_exact_match(skb
, slave
, bond
)) {
1260 if (is_link_local_ether_addr(eth_hdr(skb
)->h_dest
))
1261 return RX_HANDLER_PASS
;
1262 return RX_HANDLER_EXACT
;
1265 skb
->dev
= bond
->dev
;
1267 if (BOND_MODE(bond
) == BOND_MODE_ALB
&&
1268 netif_is_bridge_port(bond
->dev
) &&
1269 skb
->pkt_type
== PACKET_HOST
) {
1271 if (unlikely(skb_cow_head(skb
,
1272 skb
->data
- skb_mac_header(skb
)))) {
1274 return RX_HANDLER_CONSUMED
;
1276 bond_hw_addr_copy(eth_hdr(skb
)->h_dest
, bond
->dev
->dev_addr
,
1277 bond
->dev
->addr_len
);
1283 static enum netdev_lag_tx_type
bond_lag_tx_type(struct bonding
*bond
)
1285 switch (BOND_MODE(bond
)) {
1286 case BOND_MODE_ROUNDROBIN
:
1287 return NETDEV_LAG_TX_TYPE_ROUNDROBIN
;
1288 case BOND_MODE_ACTIVEBACKUP
:
1289 return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP
;
1290 case BOND_MODE_BROADCAST
:
1291 return NETDEV_LAG_TX_TYPE_BROADCAST
;
1293 case BOND_MODE_8023AD
:
1294 return NETDEV_LAG_TX_TYPE_HASH
;
1296 return NETDEV_LAG_TX_TYPE_UNKNOWN
;
1300 static enum netdev_lag_hash
bond_lag_hash_type(struct bonding
*bond
,
1301 enum netdev_lag_tx_type type
)
1303 if (type
!= NETDEV_LAG_TX_TYPE_HASH
)
1304 return NETDEV_LAG_HASH_NONE
;
1306 switch (bond
->params
.xmit_policy
) {
1307 case BOND_XMIT_POLICY_LAYER2
:
1308 return NETDEV_LAG_HASH_L2
;
1309 case BOND_XMIT_POLICY_LAYER34
:
1310 return NETDEV_LAG_HASH_L34
;
1311 case BOND_XMIT_POLICY_LAYER23
:
1312 return NETDEV_LAG_HASH_L23
;
1313 case BOND_XMIT_POLICY_ENCAP23
:
1314 return NETDEV_LAG_HASH_E23
;
1315 case BOND_XMIT_POLICY_ENCAP34
:
1316 return NETDEV_LAG_HASH_E34
;
1318 return NETDEV_LAG_HASH_UNKNOWN
;
1322 static int bond_master_upper_dev_link(struct bonding
*bond
, struct slave
*slave
,
1323 struct netlink_ext_ack
*extack
)
1325 struct netdev_lag_upper_info lag_upper_info
;
1326 enum netdev_lag_tx_type type
;
1328 type
= bond_lag_tx_type(bond
);
1329 lag_upper_info
.tx_type
= type
;
1330 lag_upper_info
.hash_type
= bond_lag_hash_type(bond
, type
);
1332 return netdev_master_upper_dev_link(slave
->dev
, bond
->dev
, slave
,
1333 &lag_upper_info
, extack
);
1336 static void bond_upper_dev_unlink(struct bonding
*bond
, struct slave
*slave
)
1338 netdev_upper_dev_unlink(slave
->dev
, bond
->dev
);
1339 slave
->dev
->flags
&= ~IFF_SLAVE
;
1342 static struct slave
*bond_alloc_slave(struct bonding
*bond
)
1344 struct slave
*slave
= NULL
;
1346 slave
= kzalloc(sizeof(*slave
), GFP_KERNEL
);
1350 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1351 SLAVE_AD_INFO(slave
) = kzalloc(sizeof(struct ad_slave_info
),
1353 if (!SLAVE_AD_INFO(slave
)) {
1358 INIT_DELAYED_WORK(&slave
->notify_work
, bond_netdev_notify_work
);
1363 static void bond_free_slave(struct slave
*slave
)
1365 struct bonding
*bond
= bond_get_bond_by_slave(slave
);
1367 cancel_delayed_work_sync(&slave
->notify_work
);
1368 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1369 kfree(SLAVE_AD_INFO(slave
));
1374 static void bond_fill_ifbond(struct bonding
*bond
, struct ifbond
*info
)
1376 info
->bond_mode
= BOND_MODE(bond
);
1377 info
->miimon
= bond
->params
.miimon
;
1378 info
->num_slaves
= bond
->slave_cnt
;
1381 static void bond_fill_ifslave(struct slave
*slave
, struct ifslave
*info
)
1383 strcpy(info
->slave_name
, slave
->dev
->name
);
1384 info
->link
= slave
->link
;
1385 info
->state
= bond_slave_state(slave
);
1386 info
->link_failure_count
= slave
->link_failure_count
;
1389 static void bond_netdev_notify_work(struct work_struct
*_work
)
1391 struct slave
*slave
= container_of(_work
, struct slave
,
1394 if (rtnl_trylock()) {
1395 struct netdev_bonding_info binfo
;
1397 bond_fill_ifslave(slave
, &binfo
.slave
);
1398 bond_fill_ifbond(slave
->bond
, &binfo
.master
);
1399 netdev_bonding_info_change(slave
->dev
, &binfo
);
1402 queue_delayed_work(slave
->bond
->wq
, &slave
->notify_work
, 1);
1406 void bond_queue_slave_event(struct slave
*slave
)
1408 queue_delayed_work(slave
->bond
->wq
, &slave
->notify_work
, 0);
1411 void bond_lower_state_changed(struct slave
*slave
)
1413 struct netdev_lag_lower_state_info info
;
1415 info
.link_up
= slave
->link
== BOND_LINK_UP
||
1416 slave
->link
== BOND_LINK_FAIL
;
1417 info
.tx_enabled
= bond_is_active_slave(slave
);
1418 netdev_lower_state_changed(slave
->dev
, &info
);
1421 /* enslave device <slave> to bond device <master> */
1422 int bond_enslave(struct net_device
*bond_dev
, struct net_device
*slave_dev
,
1423 struct netlink_ext_ack
*extack
)
1425 struct bonding
*bond
= netdev_priv(bond_dev
);
1426 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
1427 struct slave
*new_slave
= NULL
, *prev_slave
;
1428 struct sockaddr_storage ss
;
1432 if (!bond
->params
.use_carrier
&&
1433 slave_dev
->ethtool_ops
->get_link
== NULL
&&
1434 slave_ops
->ndo_do_ioctl
== NULL
) {
1435 slave_warn(bond_dev
, slave_dev
, "no link monitoring support\n");
1438 /* already in-use? */
1439 if (netdev_is_rx_handler_busy(slave_dev
)) {
1440 NL_SET_ERR_MSG(extack
, "Device is in use and cannot be enslaved");
1441 slave_err(bond_dev
, slave_dev
,
1442 "Error: Device is in use and cannot be enslaved\n");
1446 if (bond_dev
== slave_dev
) {
1447 NL_SET_ERR_MSG(extack
, "Cannot enslave bond to itself.");
1448 netdev_err(bond_dev
, "cannot enslave bond to itself.\n");
1452 /* vlan challenged mutual exclusion */
1453 /* no need to lock since we're protected by rtnl_lock */
1454 if (slave_dev
->features
& NETIF_F_VLAN_CHALLENGED
) {
1455 slave_dbg(bond_dev
, slave_dev
, "is NETIF_F_VLAN_CHALLENGED\n");
1456 if (vlan_uses_dev(bond_dev
)) {
1457 NL_SET_ERR_MSG(extack
, "Can not enslave VLAN challenged device to VLAN enabled bond");
1458 slave_err(bond_dev
, slave_dev
, "Error: cannot enslave VLAN challenged slave on VLAN enabled bond\n");
1461 slave_warn(bond_dev
, slave_dev
, "enslaved VLAN challenged slave. Adding VLANs will be blocked as long as it is part of bond.\n");
1464 slave_dbg(bond_dev
, slave_dev
, "is !NETIF_F_VLAN_CHALLENGED\n");
1467 /* Old ifenslave binaries are no longer supported. These can
1468 * be identified with moderate accuracy by the state of the slave:
1469 * the current ifenslave will set the interface down prior to
1470 * enslaving it; the old ifenslave will not.
1472 if (slave_dev
->flags
& IFF_UP
) {
1473 NL_SET_ERR_MSG(extack
, "Device can not be enslaved while up");
1474 slave_err(bond_dev
, slave_dev
, "slave is up - this may be due to an out of date ifenslave\n");
1478 /* set bonding device ether type by slave - bonding netdevices are
1479 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1480 * there is a need to override some of the type dependent attribs/funcs.
1482 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1483 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1485 if (!bond_has_slaves(bond
)) {
1486 if (bond_dev
->type
!= slave_dev
->type
) {
1487 slave_dbg(bond_dev
, slave_dev
, "change device type from %d to %d\n",
1488 bond_dev
->type
, slave_dev
->type
);
1490 res
= call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE
,
1492 res
= notifier_to_errno(res
);
1494 slave_err(bond_dev
, slave_dev
, "refused to change device type\n");
1498 /* Flush unicast and multicast addresses */
1499 dev_uc_flush(bond_dev
);
1500 dev_mc_flush(bond_dev
);
1502 if (slave_dev
->type
!= ARPHRD_ETHER
)
1503 bond_setup_by_slave(bond_dev
, slave_dev
);
1505 ether_setup(bond_dev
);
1506 bond_dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1509 call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE
,
1512 } else if (bond_dev
->type
!= slave_dev
->type
) {
1513 NL_SET_ERR_MSG(extack
, "Device type is different from other slaves");
1514 slave_err(bond_dev
, slave_dev
, "ether type (%d) is different from other slaves (%d), can not enslave it\n",
1515 slave_dev
->type
, bond_dev
->type
);
1519 if (slave_dev
->type
== ARPHRD_INFINIBAND
&&
1520 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1521 NL_SET_ERR_MSG(extack
, "Only active-backup mode is supported for infiniband slaves");
1522 slave_warn(bond_dev
, slave_dev
, "Type (%d) supports only active-backup mode\n",
1525 goto err_undo_flags
;
1528 if (!slave_ops
->ndo_set_mac_address
||
1529 slave_dev
->type
== ARPHRD_INFINIBAND
) {
1530 slave_warn(bond_dev
, slave_dev
, "The slave device specified does not support setting the MAC address\n");
1531 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
&&
1532 bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
) {
1533 if (!bond_has_slaves(bond
)) {
1534 bond
->params
.fail_over_mac
= BOND_FOM_ACTIVE
;
1535 slave_warn(bond_dev
, slave_dev
, "Setting fail_over_mac to active for active-backup mode\n");
1537 NL_SET_ERR_MSG(extack
, "Slave device does not support setting the MAC address, but fail_over_mac is not set to active");
1538 slave_err(bond_dev
, slave_dev
, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n");
1540 goto err_undo_flags
;
1545 call_netdevice_notifiers(NETDEV_JOIN
, slave_dev
);
1547 /* If this is the first slave, then we need to set the master's hardware
1548 * address to be the same as the slave's.
1550 if (!bond_has_slaves(bond
) &&
1551 bond
->dev
->addr_assign_type
== NET_ADDR_RANDOM
) {
1552 res
= bond_set_dev_addr(bond
->dev
, slave_dev
);
1554 goto err_undo_flags
;
1557 new_slave
= bond_alloc_slave(bond
);
1560 goto err_undo_flags
;
1563 new_slave
->bond
= bond
;
1564 new_slave
->dev
= slave_dev
;
1565 /* Set the new_slave's queue_id to be zero. Queue ID mapping
1566 * is set via sysfs or module option if desired.
1568 new_slave
->queue_id
= 0;
1570 /* Save slave's original mtu and then set it to match the bond */
1571 new_slave
->original_mtu
= slave_dev
->mtu
;
1572 res
= dev_set_mtu(slave_dev
, bond
->dev
->mtu
);
1574 slave_err(bond_dev
, slave_dev
, "Error %d calling dev_set_mtu\n", res
);
1578 /* Save slave's original ("permanent") mac address for modes
1579 * that need it, and for restoring it upon release, and then
1580 * set it to the master's address
1582 bond_hw_addr_copy(new_slave
->perm_hwaddr
, slave_dev
->dev_addr
,
1583 slave_dev
->addr_len
);
1585 if (!bond
->params
.fail_over_mac
||
1586 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1587 /* Set slave to master's mac address. The application already
1588 * set the master's mac address to that of the first slave
1590 memcpy(ss
.__data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
1591 ss
.ss_family
= slave_dev
->type
;
1592 res
= dev_set_mac_address(slave_dev
, (struct sockaddr
*)&ss
,
1595 slave_err(bond_dev
, slave_dev
, "Error %d calling set_mac_address\n", res
);
1596 goto err_restore_mtu
;
1600 /* set slave flag before open to prevent IPv6 addrconf */
1601 slave_dev
->flags
|= IFF_SLAVE
;
1603 /* open the slave since the application closed it */
1604 res
= dev_open(slave_dev
, extack
);
1606 slave_err(bond_dev
, slave_dev
, "Opening slave failed\n");
1607 goto err_restore_mac
;
1610 slave_dev
->priv_flags
|= IFF_BONDING
;
1611 /* initialize slave stats */
1612 dev_get_stats(new_slave
->dev
, &new_slave
->slave_stats
);
1614 if (bond_is_lb(bond
)) {
1615 /* bond_alb_init_slave() must be called before all other stages since
1616 * it might fail and we do not want to have to undo everything
1618 res
= bond_alb_init_slave(bond
, new_slave
);
1623 res
= vlan_vids_add_by_dev(slave_dev
, bond_dev
);
1625 slave_err(bond_dev
, slave_dev
, "Couldn't add bond vlan ids\n");
1629 prev_slave
= bond_last_slave(bond
);
1631 new_slave
->delay
= 0;
1632 new_slave
->link_failure_count
= 0;
1634 if (bond_update_speed_duplex(new_slave
) &&
1635 bond_needs_speed_duplex(bond
))
1636 new_slave
->link
= BOND_LINK_DOWN
;
1638 new_slave
->last_rx
= jiffies
-
1639 (msecs_to_jiffies(bond
->params
.arp_interval
) + 1);
1640 for (i
= 0; i
< BOND_MAX_ARP_TARGETS
; i
++)
1641 new_slave
->target_last_arp_rx
[i
] = new_slave
->last_rx
;
1643 if (bond
->params
.miimon
&& !bond
->params
.use_carrier
) {
1644 link_reporting
= bond_check_dev_link(bond
, slave_dev
, 1);
1646 if ((link_reporting
== -1) && !bond
->params
.arp_interval
) {
1647 /* miimon is set but a bonded network driver
1648 * does not support ETHTOOL/MII and
1649 * arp_interval is not set. Note: if
1650 * use_carrier is enabled, we will never go
1651 * here (because netif_carrier is always
1652 * supported); thus, we don't need to change
1653 * the messages for netif_carrier.
1655 slave_warn(bond_dev
, slave_dev
, "MII and ETHTOOL support not available for slave, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n");
1656 } else if (link_reporting
== -1) {
1657 /* unable get link status using mii/ethtool */
1658 slave_warn(bond_dev
, slave_dev
, "can't get link status from slave; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n");
1662 /* check for initial state */
1663 new_slave
->link
= BOND_LINK_NOCHANGE
;
1664 if (bond
->params
.miimon
) {
1665 if (bond_check_dev_link(bond
, slave_dev
, 0) == BMSR_LSTATUS
) {
1666 if (bond
->params
.updelay
) {
1667 bond_set_slave_link_state(new_slave
,
1669 BOND_SLAVE_NOTIFY_NOW
);
1670 new_slave
->delay
= bond
->params
.updelay
;
1672 bond_set_slave_link_state(new_slave
,
1674 BOND_SLAVE_NOTIFY_NOW
);
1677 bond_set_slave_link_state(new_slave
, BOND_LINK_DOWN
,
1678 BOND_SLAVE_NOTIFY_NOW
);
1680 } else if (bond
->params
.arp_interval
) {
1681 bond_set_slave_link_state(new_slave
,
1682 (netif_carrier_ok(slave_dev
) ?
1683 BOND_LINK_UP
: BOND_LINK_DOWN
),
1684 BOND_SLAVE_NOTIFY_NOW
);
1686 bond_set_slave_link_state(new_slave
, BOND_LINK_UP
,
1687 BOND_SLAVE_NOTIFY_NOW
);
1690 if (new_slave
->link
!= BOND_LINK_DOWN
)
1691 new_slave
->last_link_up
= jiffies
;
1692 slave_dbg(bond_dev
, slave_dev
, "Initial state of slave is BOND_LINK_%s\n",
1693 new_slave
->link
== BOND_LINK_DOWN
? "DOWN" :
1694 (new_slave
->link
== BOND_LINK_UP
? "UP" : "BACK"));
1696 if (bond_uses_primary(bond
) && bond
->params
.primary
[0]) {
1697 /* if there is a primary slave, remember it */
1698 if (strcmp(bond
->params
.primary
, new_slave
->dev
->name
) == 0) {
1699 rcu_assign_pointer(bond
->primary_slave
, new_slave
);
1700 bond
->force_primary
= true;
1704 switch (BOND_MODE(bond
)) {
1705 case BOND_MODE_ACTIVEBACKUP
:
1706 bond_set_slave_inactive_flags(new_slave
,
1707 BOND_SLAVE_NOTIFY_NOW
);
1709 case BOND_MODE_8023AD
:
1710 /* in 802.3ad mode, the internal mechanism
1711 * will activate the slaves in the selected
1714 bond_set_slave_inactive_flags(new_slave
, BOND_SLAVE_NOTIFY_NOW
);
1715 /* if this is the first slave */
1717 SLAVE_AD_INFO(new_slave
)->id
= 1;
1718 /* Initialize AD with the number of times that the AD timer is called in 1 second
1719 * can be called only after the mac address of the bond is set
1721 bond_3ad_initialize(bond
, 1000/AD_TIMER_INTERVAL
);
1723 SLAVE_AD_INFO(new_slave
)->id
=
1724 SLAVE_AD_INFO(prev_slave
)->id
+ 1;
1727 bond_3ad_bind_slave(new_slave
);
1731 bond_set_active_slave(new_slave
);
1732 bond_set_slave_inactive_flags(new_slave
, BOND_SLAVE_NOTIFY_NOW
);
1735 slave_dbg(bond_dev
, slave_dev
, "This slave is always active in trunk mode\n");
1737 /* always active in trunk mode */
1738 bond_set_active_slave(new_slave
);
1740 /* In trunking mode there is little meaning to curr_active_slave
1741 * anyway (it holds no special properties of the bond device),
1742 * so we can change it without calling change_active_interface()
1744 if (!rcu_access_pointer(bond
->curr_active_slave
) &&
1745 new_slave
->link
== BOND_LINK_UP
)
1746 rcu_assign_pointer(bond
->curr_active_slave
, new_slave
);
1749 } /* switch(bond_mode) */
1751 #ifdef CONFIG_NET_POLL_CONTROLLER
1752 if (bond
->dev
->npinfo
) {
1753 if (slave_enable_netpoll(new_slave
)) {
1754 slave_info(bond_dev
, slave_dev
, "master_dev is using netpoll, but new slave device does not support netpoll\n");
1761 if (!(bond_dev
->features
& NETIF_F_LRO
))
1762 dev_disable_lro(slave_dev
);
1764 res
= netdev_rx_handler_register(slave_dev
, bond_handle_frame
,
1767 slave_dbg(bond_dev
, slave_dev
, "Error %d calling netdev_rx_handler_register\n", res
);
1771 res
= bond_master_upper_dev_link(bond
, new_slave
, extack
);
1773 slave_dbg(bond_dev
, slave_dev
, "Error %d calling bond_master_upper_dev_link\n", res
);
1774 goto err_unregister
;
1777 res
= bond_sysfs_slave_add(new_slave
);
1779 slave_dbg(bond_dev
, slave_dev
, "Error %d calling bond_sysfs_slave_add\n", res
);
1780 goto err_upper_unlink
;
1783 /* If the mode uses primary, then the following is handled by
1784 * bond_change_active_slave().
1786 if (!bond_uses_primary(bond
)) {
1787 /* set promiscuity level to new slave */
1788 if (bond_dev
->flags
& IFF_PROMISC
) {
1789 res
= dev_set_promiscuity(slave_dev
, 1);
1794 /* set allmulti level to new slave */
1795 if (bond_dev
->flags
& IFF_ALLMULTI
) {
1796 res
= dev_set_allmulti(slave_dev
, 1);
1798 if (bond_dev
->flags
& IFF_PROMISC
)
1799 dev_set_promiscuity(slave_dev
, -1);
1804 netif_addr_lock_bh(bond_dev
);
1805 dev_mc_sync_multiple(slave_dev
, bond_dev
);
1806 dev_uc_sync_multiple(slave_dev
, bond_dev
);
1807 netif_addr_unlock_bh(bond_dev
);
1809 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1810 /* add lacpdu mc addr to mc list */
1811 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
1813 dev_mc_add(slave_dev
, lacpdu_multicast
);
1818 bond_compute_features(bond
);
1819 bond_set_carrier(bond
);
1821 if (bond_uses_primary(bond
)) {
1823 bond_select_active_slave(bond
);
1824 unblock_netpoll_tx();
1827 if (bond_mode_can_use_xmit_hash(bond
))
1828 bond_update_slave_arr(bond
, NULL
);
1831 slave_info(bond_dev
, slave_dev
, "Enslaving as %s interface with %s link\n",
1832 bond_is_active_slave(new_slave
) ? "an active" : "a backup",
1833 new_slave
->link
!= BOND_LINK_DOWN
? "an up" : "a down");
1835 /* enslave is successful */
1836 bond_queue_slave_event(new_slave
);
1839 /* Undo stages on error */
1841 bond_sysfs_slave_del(new_slave
);
1844 bond_upper_dev_unlink(bond
, new_slave
);
1847 netdev_rx_handler_unregister(slave_dev
);
1850 vlan_vids_del_by_dev(slave_dev
, bond_dev
);
1851 if (rcu_access_pointer(bond
->primary_slave
) == new_slave
)
1852 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
1853 if (rcu_access_pointer(bond
->curr_active_slave
) == new_slave
) {
1855 bond_change_active_slave(bond
, NULL
);
1856 bond_select_active_slave(bond
);
1857 unblock_netpoll_tx();
1859 /* either primary_slave or curr_active_slave might've changed */
1861 slave_disable_netpoll(new_slave
);
1864 if (!netif_is_bond_master(slave_dev
))
1865 slave_dev
->priv_flags
&= ~IFF_BONDING
;
1866 dev_close(slave_dev
);
1869 slave_dev
->flags
&= ~IFF_SLAVE
;
1870 if (!bond
->params
.fail_over_mac
||
1871 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1872 /* XXX TODO - fom follow mode needs to change master's
1873 * MAC if this slave's MAC is in use by the bond, or at
1874 * least print a warning.
1876 bond_hw_addr_copy(ss
.__data
, new_slave
->perm_hwaddr
,
1877 new_slave
->dev
->addr_len
);
1878 ss
.ss_family
= slave_dev
->type
;
1879 dev_set_mac_address(slave_dev
, (struct sockaddr
*)&ss
, NULL
);
1883 dev_set_mtu(slave_dev
, new_slave
->original_mtu
);
1886 bond_free_slave(new_slave
);
1889 /* Enslave of first slave has failed and we need to fix master's mac */
1890 if (!bond_has_slaves(bond
)) {
1891 if (ether_addr_equal_64bits(bond_dev
->dev_addr
,
1892 slave_dev
->dev_addr
))
1893 eth_hw_addr_random(bond_dev
);
1894 if (bond_dev
->type
!= ARPHRD_ETHER
) {
1895 dev_close(bond_dev
);
1896 ether_setup(bond_dev
);
1897 bond_dev
->flags
|= IFF_MASTER
;
1898 bond_dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1905 /* Try to release the slave device <slave> from the bond device <master>
1906 * It is legal to access curr_active_slave without a lock because all the function
1907 * is RTNL-locked. If "all" is true it means that the function is being called
1908 * while destroying a bond interface and all slaves are being released.
1910 * The rules for slave state should be:
1911 * for Active/Backup:
1912 * Active stays on all backups go down
1913 * for Bonded connections:
1914 * The first up interface should be left on and all others downed.
1916 static int __bond_release_one(struct net_device
*bond_dev
,
1917 struct net_device
*slave_dev
,
1918 bool all
, bool unregister
)
1920 struct bonding
*bond
= netdev_priv(bond_dev
);
1921 struct slave
*slave
, *oldcurrent
;
1922 struct sockaddr_storage ss
;
1923 int old_flags
= bond_dev
->flags
;
1924 netdev_features_t old_features
= bond_dev
->features
;
1926 /* slave is not a slave or master is not master of this slave */
1927 if (!(slave_dev
->flags
& IFF_SLAVE
) ||
1928 !netdev_has_upper_dev(slave_dev
, bond_dev
)) {
1929 slave_dbg(bond_dev
, slave_dev
, "cannot release slave\n");
1935 slave
= bond_get_slave_by_dev(bond
, slave_dev
);
1937 /* not a slave of this bond */
1938 slave_info(bond_dev
, slave_dev
, "interface not enslaved\n");
1939 unblock_netpoll_tx();
1943 bond_set_slave_inactive_flags(slave
, BOND_SLAVE_NOTIFY_NOW
);
1945 bond_sysfs_slave_del(slave
);
1947 /* recompute stats just before removing the slave */
1948 bond_get_stats(bond
->dev
, &bond
->bond_stats
);
1950 bond_upper_dev_unlink(bond
, slave
);
1951 /* unregister rx_handler early so bond_handle_frame wouldn't be called
1952 * for this slave anymore.
1954 netdev_rx_handler_unregister(slave_dev
);
1956 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1957 bond_3ad_unbind_slave(slave
);
1959 if (bond_mode_can_use_xmit_hash(bond
))
1960 bond_update_slave_arr(bond
, slave
);
1962 slave_info(bond_dev
, slave_dev
, "Releasing %s interface\n",
1963 bond_is_active_slave(slave
) ? "active" : "backup");
1965 oldcurrent
= rcu_access_pointer(bond
->curr_active_slave
);
1967 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
1969 if (!all
&& (!bond
->params
.fail_over_mac
||
1970 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
)) {
1971 if (ether_addr_equal_64bits(bond_dev
->dev_addr
, slave
->perm_hwaddr
) &&
1972 bond_has_slaves(bond
))
1973 slave_warn(bond_dev
, slave_dev
, "the permanent HWaddr of slave - %pM - is still in use by bond - set the HWaddr of slave to a different address to avoid conflicts\n",
1974 slave
->perm_hwaddr
);
1977 if (rtnl_dereference(bond
->primary_slave
) == slave
)
1978 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
1980 if (oldcurrent
== slave
)
1981 bond_change_active_slave(bond
, NULL
);
1983 if (bond_is_lb(bond
)) {
1984 /* Must be called only after the slave has been
1985 * detached from the list and the curr_active_slave
1986 * has been cleared (if our_slave == old_current),
1987 * but before a new active slave is selected.
1989 bond_alb_deinit_slave(bond
, slave
);
1993 RCU_INIT_POINTER(bond
->curr_active_slave
, NULL
);
1994 } else if (oldcurrent
== slave
) {
1995 /* Note that we hold RTNL over this sequence, so there
1996 * is no concern that another slave add/remove event
1999 bond_select_active_slave(bond
);
2002 if (!bond_has_slaves(bond
)) {
2003 bond_set_carrier(bond
);
2004 eth_hw_addr_random(bond_dev
);
2007 unblock_netpoll_tx();
2011 if (!bond_has_slaves(bond
)) {
2012 call_netdevice_notifiers(NETDEV_CHANGEADDR
, bond
->dev
);
2013 call_netdevice_notifiers(NETDEV_RELEASE
, bond
->dev
);
2016 bond_compute_features(bond
);
2017 if (!(bond_dev
->features
& NETIF_F_VLAN_CHALLENGED
) &&
2018 (old_features
& NETIF_F_VLAN_CHALLENGED
))
2019 slave_info(bond_dev
, slave_dev
, "last VLAN challenged slave left bond - VLAN blocking is removed\n");
2021 vlan_vids_del_by_dev(slave_dev
, bond_dev
);
2023 /* If the mode uses primary, then this case was handled above by
2024 * bond_change_active_slave(..., NULL)
2026 if (!bond_uses_primary(bond
)) {
2027 /* unset promiscuity level from slave
2028 * NOTE: The NETDEV_CHANGEADDR call above may change the value
2029 * of the IFF_PROMISC flag in the bond_dev, but we need the
2030 * value of that flag before that change, as that was the value
2031 * when this slave was attached, so we cache at the start of the
2032 * function and use it here. Same goes for ALLMULTI below
2034 if (old_flags
& IFF_PROMISC
)
2035 dev_set_promiscuity(slave_dev
, -1);
2037 /* unset allmulti level from slave */
2038 if (old_flags
& IFF_ALLMULTI
)
2039 dev_set_allmulti(slave_dev
, -1);
2041 bond_hw_addr_flush(bond_dev
, slave_dev
);
2044 slave_disable_netpoll(slave
);
2046 /* close slave before restoring its mac address */
2047 dev_close(slave_dev
);
2049 if (bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
||
2050 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
2051 /* restore original ("permanent") mac address */
2052 bond_hw_addr_copy(ss
.__data
, slave
->perm_hwaddr
,
2053 slave
->dev
->addr_len
);
2054 ss
.ss_family
= slave_dev
->type
;
2055 dev_set_mac_address(slave_dev
, (struct sockaddr
*)&ss
, NULL
);
2059 __dev_set_mtu(slave_dev
, slave
->original_mtu
);
2061 dev_set_mtu(slave_dev
, slave
->original_mtu
);
2063 if (!netif_is_bond_master(slave_dev
))
2064 slave_dev
->priv_flags
&= ~IFF_BONDING
;
2066 bond_free_slave(slave
);
2071 /* A wrapper used because of ndo_del_link */
2072 int bond_release(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
2074 return __bond_release_one(bond_dev
, slave_dev
, false, false);
2077 /* First release a slave and then destroy the bond if no more slaves are left.
2078 * Must be under rtnl_lock when this function is called.
2080 static int bond_release_and_destroy(struct net_device
*bond_dev
,
2081 struct net_device
*slave_dev
)
2083 struct bonding
*bond
= netdev_priv(bond_dev
);
2086 ret
= __bond_release_one(bond_dev
, slave_dev
, false, true);
2087 if (ret
== 0 && !bond_has_slaves(bond
)) {
2088 bond_dev
->priv_flags
|= IFF_DISABLE_NETPOLL
;
2089 netdev_info(bond_dev
, "Destroying bond\n");
2090 bond_remove_proc_entry(bond
);
2091 unregister_netdevice(bond_dev
);
2096 static void bond_info_query(struct net_device
*bond_dev
, struct ifbond
*info
)
2098 struct bonding
*bond
= netdev_priv(bond_dev
);
2099 bond_fill_ifbond(bond
, info
);
2102 static int bond_slave_info_query(struct net_device
*bond_dev
, struct ifslave
*info
)
2104 struct bonding
*bond
= netdev_priv(bond_dev
);
2105 struct list_head
*iter
;
2106 int i
= 0, res
= -ENODEV
;
2107 struct slave
*slave
;
2109 bond_for_each_slave(bond
, slave
, iter
) {
2110 if (i
++ == (int)info
->slave_id
) {
2112 bond_fill_ifslave(slave
, info
);
2120 /*-------------------------------- Monitoring -------------------------------*/
2122 /* called with rcu_read_lock() */
2123 static int bond_miimon_inspect(struct bonding
*bond
)
2125 int link_state
, commit
= 0;
2126 struct list_head
*iter
;
2127 struct slave
*slave
;
2128 bool ignore_updelay
;
2130 ignore_updelay
= !rcu_dereference(bond
->curr_active_slave
);
2132 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2133 bond_propose_link_state(slave
, BOND_LINK_NOCHANGE
);
2135 link_state
= bond_check_dev_link(bond
, slave
->dev
, 0);
2137 switch (slave
->link
) {
2142 bond_propose_link_state(slave
, BOND_LINK_FAIL
);
2144 slave
->delay
= bond
->params
.downdelay
;
2146 slave_info(bond
->dev
, slave
->dev
, "link status down for %sinterface, disabling it in %d ms\n",
2148 BOND_MODE_ACTIVEBACKUP
) ?
2149 (bond_is_active_slave(slave
) ?
2150 "active " : "backup ") : "",
2151 bond
->params
.downdelay
* bond
->params
.miimon
);
2154 case BOND_LINK_FAIL
:
2156 /* recovered before downdelay expired */
2157 bond_propose_link_state(slave
, BOND_LINK_UP
);
2158 slave
->last_link_up
= jiffies
;
2159 slave_info(bond
->dev
, slave
->dev
, "link status up again after %d ms\n",
2160 (bond
->params
.downdelay
- slave
->delay
) *
2161 bond
->params
.miimon
);
2166 if (slave
->delay
<= 0) {
2167 bond_propose_link_state(slave
, BOND_LINK_DOWN
);
2175 case BOND_LINK_DOWN
:
2179 bond_propose_link_state(slave
, BOND_LINK_BACK
);
2181 slave
->delay
= bond
->params
.updelay
;
2184 slave_info(bond
->dev
, slave
->dev
, "link status up, enabling it in %d ms\n",
2185 ignore_updelay
? 0 :
2186 bond
->params
.updelay
*
2187 bond
->params
.miimon
);
2190 case BOND_LINK_BACK
:
2192 bond_propose_link_state(slave
, BOND_LINK_DOWN
);
2193 slave_info(bond
->dev
, slave
->dev
, "link status down again after %d ms\n",
2194 (bond
->params
.updelay
- slave
->delay
) *
2195 bond
->params
.miimon
);
2203 if (slave
->delay
<= 0) {
2204 bond_propose_link_state(slave
, BOND_LINK_UP
);
2206 ignore_updelay
= false;
2218 static void bond_miimon_link_change(struct bonding
*bond
,
2219 struct slave
*slave
,
2222 switch (BOND_MODE(bond
)) {
2223 case BOND_MODE_8023AD
:
2224 bond_3ad_handle_link_change(slave
, link
);
2228 bond_alb_handle_link_change(bond
, slave
, link
);
2231 bond_update_slave_arr(bond
, NULL
);
2236 static void bond_miimon_commit(struct bonding
*bond
)
2238 struct list_head
*iter
;
2239 struct slave
*slave
, *primary
;
2241 bond_for_each_slave(bond
, slave
, iter
) {
2242 switch (slave
->link_new_state
) {
2243 case BOND_LINK_NOCHANGE
:
2244 /* For 802.3ad mode, check current slave speed and
2245 * duplex again in case its port was disabled after
2246 * invalid speed/duplex reporting but recovered before
2247 * link monitoring could make a decision on the actual
2250 if (BOND_MODE(bond
) == BOND_MODE_8023AD
&&
2251 slave
->link
== BOND_LINK_UP
)
2252 bond_3ad_adapter_speed_duplex_changed(slave
);
2256 if (bond_update_speed_duplex(slave
) &&
2257 bond_needs_speed_duplex(bond
)) {
2258 slave
->link
= BOND_LINK_DOWN
;
2259 if (net_ratelimit())
2260 slave_warn(bond
->dev
, slave
->dev
,
2261 "failed to get link speed/duplex\n");
2264 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2265 BOND_SLAVE_NOTIFY_NOW
);
2266 slave
->last_link_up
= jiffies
;
2268 primary
= rtnl_dereference(bond
->primary_slave
);
2269 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
2270 /* prevent it from being the active one */
2271 bond_set_backup_slave(slave
);
2272 } else if (BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
2273 /* make it immediately active */
2274 bond_set_active_slave(slave
);
2277 slave_info(bond
->dev
, slave
->dev
, "link status definitely up, %u Mbps %s duplex\n",
2278 slave
->speed
== SPEED_UNKNOWN
? 0 : slave
->speed
,
2279 slave
->duplex
? "full" : "half");
2281 bond_miimon_link_change(bond
, slave
, BOND_LINK_UP
);
2283 if (!bond
->curr_active_slave
|| slave
== primary
)
2288 case BOND_LINK_DOWN
:
2289 if (slave
->link_failure_count
< UINT_MAX
)
2290 slave
->link_failure_count
++;
2292 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2293 BOND_SLAVE_NOTIFY_NOW
);
2295 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
||
2296 BOND_MODE(bond
) == BOND_MODE_8023AD
)
2297 bond_set_slave_inactive_flags(slave
,
2298 BOND_SLAVE_NOTIFY_NOW
);
2300 slave_info(bond
->dev
, slave
->dev
, "link status definitely down, disabling slave\n");
2302 bond_miimon_link_change(bond
, slave
, BOND_LINK_DOWN
);
2304 if (slave
== rcu_access_pointer(bond
->curr_active_slave
))
2310 slave_err(bond
->dev
, slave
->dev
, "invalid new link %d on slave\n",
2311 slave
->link_new_state
);
2312 bond_propose_link_state(slave
, BOND_LINK_NOCHANGE
);
2319 bond_select_active_slave(bond
);
2320 unblock_netpoll_tx();
2323 bond_set_carrier(bond
);
2328 * Really a wrapper that splits the mii monitor into two phases: an
2329 * inspection, then (if inspection indicates something needs to be done)
2330 * an acquisition of appropriate locks followed by a commit phase to
2331 * implement whatever link state changes are indicated.
2333 static void bond_mii_monitor(struct work_struct
*work
)
2335 struct bonding
*bond
= container_of(work
, struct bonding
,
2337 bool should_notify_peers
= false;
2339 unsigned long delay
;
2340 struct slave
*slave
;
2341 struct list_head
*iter
;
2343 delay
= msecs_to_jiffies(bond
->params
.miimon
);
2345 if (!bond_has_slaves(bond
))
2349 should_notify_peers
= bond_should_notify_peers(bond
);
2350 commit
= !!bond_miimon_inspect(bond
);
2351 if (bond
->send_peer_notif
) {
2353 if (rtnl_trylock()) {
2354 bond
->send_peer_notif
--;
2362 /* Race avoidance with bond_close cancel of workqueue */
2363 if (!rtnl_trylock()) {
2365 should_notify_peers
= false;
2369 bond_for_each_slave(bond
, slave
, iter
) {
2370 bond_commit_link_state(slave
, BOND_SLAVE_NOTIFY_LATER
);
2372 bond_miimon_commit(bond
);
2374 rtnl_unlock(); /* might sleep, hold no other locks */
2378 if (bond
->params
.miimon
)
2379 queue_delayed_work(bond
->wq
, &bond
->mii_work
, delay
);
2381 if (should_notify_peers
) {
2382 if (!rtnl_trylock())
2384 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
, bond
->dev
);
2389 static int bond_upper_dev_walk(struct net_device
*upper
, void *data
)
2391 __be32 ip
= *((__be32
*)data
);
2393 return ip
== bond_confirm_addr(upper
, 0, ip
);
2396 static bool bond_has_this_ip(struct bonding
*bond
, __be32 ip
)
2400 if (ip
== bond_confirm_addr(bond
->dev
, 0, ip
))
2404 if (netdev_walk_all_upper_dev_rcu(bond
->dev
, bond_upper_dev_walk
, &ip
))
2411 /* We go to the (large) trouble of VLAN tagging ARP frames because
2412 * switches in VLAN mode (especially if ports are configured as
2413 * "native" to a VLAN) might not pass non-tagged frames.
2415 static void bond_arp_send(struct slave
*slave
, int arp_op
, __be32 dest_ip
,
2416 __be32 src_ip
, struct bond_vlan_tag
*tags
)
2418 struct sk_buff
*skb
;
2419 struct bond_vlan_tag
*outer_tag
= tags
;
2420 struct net_device
*slave_dev
= slave
->dev
;
2421 struct net_device
*bond_dev
= slave
->bond
->dev
;
2423 slave_dbg(bond_dev
, slave_dev
, "arp %d on slave: dst %pI4 src %pI4\n",
2424 arp_op
, &dest_ip
, &src_ip
);
2426 skb
= arp_create(arp_op
, ETH_P_ARP
, dest_ip
, slave_dev
, src_ip
,
2427 NULL
, slave_dev
->dev_addr
, NULL
);
2430 net_err_ratelimited("ARP packet allocation failed\n");
2434 if (!tags
|| tags
->vlan_proto
== VLAN_N_VID
)
2439 /* Go through all the tags backwards and add them to the packet */
2440 while (tags
->vlan_proto
!= VLAN_N_VID
) {
2441 if (!tags
->vlan_id
) {
2446 slave_dbg(bond_dev
, slave_dev
, "inner tag: proto %X vid %X\n",
2447 ntohs(outer_tag
->vlan_proto
), tags
->vlan_id
);
2448 skb
= vlan_insert_tag_set_proto(skb
, tags
->vlan_proto
,
2451 net_err_ratelimited("failed to insert inner VLAN tag\n");
2457 /* Set the outer tag */
2458 if (outer_tag
->vlan_id
) {
2459 slave_dbg(bond_dev
, slave_dev
, "outer tag: proto %X vid %X\n",
2460 ntohs(outer_tag
->vlan_proto
), outer_tag
->vlan_id
);
2461 __vlan_hwaccel_put_tag(skb
, outer_tag
->vlan_proto
,
2462 outer_tag
->vlan_id
);
2469 /* Validate the device path between the @start_dev and the @end_dev.
2470 * The path is valid if the @end_dev is reachable through device
2472 * When the path is validated, collect any vlan information in the
2475 struct bond_vlan_tag
*bond_verify_device_path(struct net_device
*start_dev
,
2476 struct net_device
*end_dev
,
2479 struct bond_vlan_tag
*tags
;
2480 struct net_device
*upper
;
2481 struct list_head
*iter
;
2483 if (start_dev
== end_dev
) {
2484 tags
= kcalloc(level
+ 1, sizeof(*tags
), GFP_ATOMIC
);
2486 return ERR_PTR(-ENOMEM
);
2487 tags
[level
].vlan_proto
= VLAN_N_VID
;
2491 netdev_for_each_upper_dev_rcu(start_dev
, upper
, iter
) {
2492 tags
= bond_verify_device_path(upper
, end_dev
, level
+ 1);
2493 if (IS_ERR_OR_NULL(tags
)) {
2498 if (is_vlan_dev(upper
)) {
2499 tags
[level
].vlan_proto
= vlan_dev_vlan_proto(upper
);
2500 tags
[level
].vlan_id
= vlan_dev_vlan_id(upper
);
2509 static void bond_arp_send_all(struct bonding
*bond
, struct slave
*slave
)
2512 struct bond_vlan_tag
*tags
;
2513 __be32
*targets
= bond
->params
.arp_targets
, addr
;
2516 for (i
= 0; i
< BOND_MAX_ARP_TARGETS
&& targets
[i
]; i
++) {
2517 slave_dbg(bond
->dev
, slave
->dev
, "%s: target %pI4\n",
2518 __func__
, &targets
[i
]);
2521 /* Find out through which dev should the packet go */
2522 rt
= ip_route_output(dev_net(bond
->dev
), targets
[i
], 0,
2525 /* there's no route to target - try to send arp
2526 * probe to generate any traffic (arp_validate=0)
2528 if (bond
->params
.arp_validate
)
2529 net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
2532 bond_arp_send(slave
, ARPOP_REQUEST
, targets
[i
],
2537 /* bond device itself */
2538 if (rt
->dst
.dev
== bond
->dev
)
2542 tags
= bond_verify_device_path(bond
->dev
, rt
->dst
.dev
, 0);
2545 if (!IS_ERR_OR_NULL(tags
))
2548 /* Not our device - skip */
2549 slave_dbg(bond
->dev
, slave
->dev
, "no path to arp_ip_target %pI4 via rt.dev %s\n",
2550 &targets
[i
], rt
->dst
.dev
? rt
->dst
.dev
->name
: "NULL");
2556 addr
= bond_confirm_addr(rt
->dst
.dev
, targets
[i
], 0);
2558 bond_arp_send(slave
, ARPOP_REQUEST
, targets
[i
], addr
, tags
);
2563 static void bond_validate_arp(struct bonding
*bond
, struct slave
*slave
, __be32 sip
, __be32 tip
)
2567 if (!sip
|| !bond_has_this_ip(bond
, tip
)) {
2568 slave_dbg(bond
->dev
, slave
->dev
, "%s: sip %pI4 tip %pI4 not found\n",
2569 __func__
, &sip
, &tip
);
2573 i
= bond_get_targets_ip(bond
->params
.arp_targets
, sip
);
2575 slave_dbg(bond
->dev
, slave
->dev
, "%s: sip %pI4 not found in targets\n",
2579 slave
->last_rx
= jiffies
;
2580 slave
->target_last_arp_rx
[i
] = jiffies
;
2583 int bond_arp_rcv(const struct sk_buff
*skb
, struct bonding
*bond
,
2584 struct slave
*slave
)
2586 struct arphdr
*arp
= (struct arphdr
*)skb
->data
;
2587 struct slave
*curr_active_slave
, *curr_arp_slave
;
2588 unsigned char *arp_ptr
;
2590 int is_arp
= skb
->protocol
== __cpu_to_be16(ETH_P_ARP
);
2593 if (!slave_do_arp_validate(bond
, slave
)) {
2594 if ((slave_do_arp_validate_only(bond
) && is_arp
) ||
2595 !slave_do_arp_validate_only(bond
))
2596 slave
->last_rx
= jiffies
;
2597 return RX_HANDLER_ANOTHER
;
2598 } else if (!is_arp
) {
2599 return RX_HANDLER_ANOTHER
;
2602 alen
= arp_hdr_len(bond
->dev
);
2604 slave_dbg(bond
->dev
, slave
->dev
, "%s: skb->dev %s\n",
2605 __func__
, skb
->dev
->name
);
2607 if (alen
> skb_headlen(skb
)) {
2608 arp
= kmalloc(alen
, GFP_ATOMIC
);
2611 if (skb_copy_bits(skb
, 0, arp
, alen
) < 0)
2615 if (arp
->ar_hln
!= bond
->dev
->addr_len
||
2616 skb
->pkt_type
== PACKET_OTHERHOST
||
2617 skb
->pkt_type
== PACKET_LOOPBACK
||
2618 arp
->ar_hrd
!= htons(ARPHRD_ETHER
) ||
2619 arp
->ar_pro
!= htons(ETH_P_IP
) ||
2623 arp_ptr
= (unsigned char *)(arp
+ 1);
2624 arp_ptr
+= bond
->dev
->addr_len
;
2625 memcpy(&sip
, arp_ptr
, 4);
2626 arp_ptr
+= 4 + bond
->dev
->addr_len
;
2627 memcpy(&tip
, arp_ptr
, 4);
2629 slave_dbg(bond
->dev
, slave
->dev
, "%s: %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2630 __func__
, slave
->dev
->name
, bond_slave_state(slave
),
2631 bond
->params
.arp_validate
, slave_do_arp_validate(bond
, slave
),
2634 curr_active_slave
= rcu_dereference(bond
->curr_active_slave
);
2635 curr_arp_slave
= rcu_dereference(bond
->current_arp_slave
);
2637 /* We 'trust' the received ARP enough to validate it if:
2639 * (a) the slave receiving the ARP is active (which includes the
2640 * current ARP slave, if any), or
2642 * (b) the receiving slave isn't active, but there is a currently
2643 * active slave and it received valid arp reply(s) after it became
2644 * the currently active slave, or
2646 * (c) there is an ARP slave that sent an ARP during the prior ARP
2647 * interval, and we receive an ARP reply on any slave. We accept
2648 * these because switch FDB update delays may deliver the ARP
2649 * reply to a slave other than the sender of the ARP request.
2651 * Note: for (b), backup slaves are receiving the broadcast ARP
2652 * request, not a reply. This request passes from the sending
2653 * slave through the L2 switch(es) to the receiving slave. Since
2654 * this is checking the request, sip/tip are swapped for
2657 * This is done to avoid endless looping when we can't reach the
2658 * arp_ip_target and fool ourselves with our own arp requests.
2660 if (bond_is_active_slave(slave
))
2661 bond_validate_arp(bond
, slave
, sip
, tip
);
2662 else if (curr_active_slave
&&
2663 time_after(slave_last_rx(bond
, curr_active_slave
),
2664 curr_active_slave
->last_link_up
))
2665 bond_validate_arp(bond
, slave
, tip
, sip
);
2666 else if (curr_arp_slave
&& (arp
->ar_op
== htons(ARPOP_REPLY
)) &&
2667 bond_time_in_interval(bond
,
2668 dev_trans_start(curr_arp_slave
->dev
), 1))
2669 bond_validate_arp(bond
, slave
, sip
, tip
);
2672 if (arp
!= (struct arphdr
*)skb
->data
)
2674 return RX_HANDLER_ANOTHER
;
2677 /* function to verify if we're in the arp_interval timeslice, returns true if
2678 * (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval +
2679 * arp_interval/2) . the arp_interval/2 is needed for really fast networks.
2681 static bool bond_time_in_interval(struct bonding
*bond
, unsigned long last_act
,
2684 int delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
2686 return time_in_range(jiffies
,
2687 last_act
- delta_in_ticks
,
2688 last_act
+ mod
* delta_in_ticks
+ delta_in_ticks
/2);
2691 /* This function is called regularly to monitor each slave's link
2692 * ensuring that traffic is being sent and received when arp monitoring
2693 * is used in load-balancing mode. if the adapter has been dormant, then an
2694 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2695 * arp monitoring in active backup mode.
2697 static void bond_loadbalance_arp_mon(struct bonding
*bond
)
2699 struct slave
*slave
, *oldcurrent
;
2700 struct list_head
*iter
;
2701 int do_failover
= 0, slave_state_changed
= 0;
2703 if (!bond_has_slaves(bond
))
2708 oldcurrent
= rcu_dereference(bond
->curr_active_slave
);
2709 /* see if any of the previous devices are up now (i.e. they have
2710 * xmt and rcv traffic). the curr_active_slave does not come into
2711 * the picture unless it is null. also, slave->last_link_up is not
2712 * needed here because we send an arp on each slave and give a slave
2713 * as long as it needs to get the tx/rx within the delta.
2714 * TODO: what about up/down delay in arp mode? it wasn't here before
2717 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2718 unsigned long trans_start
= dev_trans_start(slave
->dev
);
2720 bond_propose_link_state(slave
, BOND_LINK_NOCHANGE
);
2722 if (slave
->link
!= BOND_LINK_UP
) {
2723 if (bond_time_in_interval(bond
, trans_start
, 1) &&
2724 bond_time_in_interval(bond
, slave
->last_rx
, 1)) {
2726 bond_propose_link_state(slave
, BOND_LINK_UP
);
2727 slave_state_changed
= 1;
2729 /* primary_slave has no meaning in round-robin
2730 * mode. the window of a slave being up and
2731 * curr_active_slave being null after enslaving
2735 slave_info(bond
->dev
, slave
->dev
, "link status definitely up\n");
2738 slave_info(bond
->dev
, slave
->dev
, "interface is now up\n");
2742 /* slave->link == BOND_LINK_UP */
2744 /* not all switches will respond to an arp request
2745 * when the source ip is 0, so don't take the link down
2746 * if we don't know our ip yet
2748 if (!bond_time_in_interval(bond
, trans_start
, 2) ||
2749 !bond_time_in_interval(bond
, slave
->last_rx
, 2)) {
2751 bond_propose_link_state(slave
, BOND_LINK_DOWN
);
2752 slave_state_changed
= 1;
2754 if (slave
->link_failure_count
< UINT_MAX
)
2755 slave
->link_failure_count
++;
2757 slave_info(bond
->dev
, slave
->dev
, "interface is now down\n");
2759 if (slave
== oldcurrent
)
2764 /* note: if switch is in round-robin mode, all links
2765 * must tx arp to ensure all links rx an arp - otherwise
2766 * links may oscillate or not come up at all; if switch is
2767 * in something like xor mode, there is nothing we can
2768 * do - all replies will be rx'ed on same link causing slaves
2769 * to be unstable during low/no traffic periods
2771 if (bond_slave_is_up(slave
))
2772 bond_arp_send_all(bond
, slave
);
2777 if (do_failover
|| slave_state_changed
) {
2778 if (!rtnl_trylock())
2781 bond_for_each_slave(bond
, slave
, iter
) {
2782 if (slave
->link_new_state
!= BOND_LINK_NOCHANGE
)
2783 slave
->link
= slave
->link_new_state
;
2786 if (slave_state_changed
) {
2787 bond_slave_state_change(bond
);
2788 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2789 bond_update_slave_arr(bond
, NULL
);
2793 bond_select_active_slave(bond
);
2794 unblock_netpoll_tx();
2800 if (bond
->params
.arp_interval
)
2801 queue_delayed_work(bond
->wq
, &bond
->arp_work
,
2802 msecs_to_jiffies(bond
->params
.arp_interval
));
2805 /* Called to inspect slaves for active-backup mode ARP monitor link state
2806 * changes. Sets proposed link state in slaves to specify what action
2807 * should take place for the slave. Returns 0 if no changes are found, >0
2808 * if changes to link states must be committed.
2810 * Called with rcu_read_lock held.
2812 static int bond_ab_arp_inspect(struct bonding
*bond
)
2814 unsigned long trans_start
, last_rx
;
2815 struct list_head
*iter
;
2816 struct slave
*slave
;
2819 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2820 bond_propose_link_state(slave
, BOND_LINK_NOCHANGE
);
2821 last_rx
= slave_last_rx(bond
, slave
);
2823 if (slave
->link
!= BOND_LINK_UP
) {
2824 if (bond_time_in_interval(bond
, last_rx
, 1)) {
2825 bond_propose_link_state(slave
, BOND_LINK_UP
);
2831 /* Give slaves 2*delta after being enslaved or made
2832 * active. This avoids bouncing, as the last receive
2833 * times need a full ARP monitor cycle to be updated.
2835 if (bond_time_in_interval(bond
, slave
->last_link_up
, 2))
2838 /* Backup slave is down if:
2839 * - No current_arp_slave AND
2840 * - more than 3*delta since last receive AND
2841 * - the bond has an IP address
2843 * Note: a non-null current_arp_slave indicates
2844 * the curr_active_slave went down and we are
2845 * searching for a new one; under this condition
2846 * we only take the curr_active_slave down - this
2847 * gives each slave a chance to tx/rx traffic
2848 * before being taken out
2850 if (!bond_is_active_slave(slave
) &&
2851 !rcu_access_pointer(bond
->current_arp_slave
) &&
2852 !bond_time_in_interval(bond
, last_rx
, 3)) {
2853 bond_propose_link_state(slave
, BOND_LINK_DOWN
);
2857 /* Active slave is down if:
2858 * - more than 2*delta since transmitting OR
2859 * - (more than 2*delta since receive AND
2860 * the bond has an IP address)
2862 trans_start
= dev_trans_start(slave
->dev
);
2863 if (bond_is_active_slave(slave
) &&
2864 (!bond_time_in_interval(bond
, trans_start
, 2) ||
2865 !bond_time_in_interval(bond
, last_rx
, 2))) {
2866 bond_propose_link_state(slave
, BOND_LINK_DOWN
);
2874 /* Called to commit link state changes noted by inspection step of
2875 * active-backup mode ARP monitor.
2877 * Called with RTNL hold.
2879 static void bond_ab_arp_commit(struct bonding
*bond
)
2881 unsigned long trans_start
;
2882 struct list_head
*iter
;
2883 struct slave
*slave
;
2885 bond_for_each_slave(bond
, slave
, iter
) {
2886 switch (slave
->link_new_state
) {
2887 case BOND_LINK_NOCHANGE
:
2891 trans_start
= dev_trans_start(slave
->dev
);
2892 if (rtnl_dereference(bond
->curr_active_slave
) != slave
||
2893 (!rtnl_dereference(bond
->curr_active_slave
) &&
2894 bond_time_in_interval(bond
, trans_start
, 1))) {
2895 struct slave
*current_arp_slave
;
2897 current_arp_slave
= rtnl_dereference(bond
->current_arp_slave
);
2898 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2899 BOND_SLAVE_NOTIFY_NOW
);
2900 if (current_arp_slave
) {
2901 bond_set_slave_inactive_flags(
2903 BOND_SLAVE_NOTIFY_NOW
);
2904 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
2907 slave_info(bond
->dev
, slave
->dev
, "link status definitely up\n");
2909 if (!rtnl_dereference(bond
->curr_active_slave
) ||
2910 slave
== rtnl_dereference(bond
->primary_slave
))
2917 case BOND_LINK_DOWN
:
2918 if (slave
->link_failure_count
< UINT_MAX
)
2919 slave
->link_failure_count
++;
2921 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2922 BOND_SLAVE_NOTIFY_NOW
);
2923 bond_set_slave_inactive_flags(slave
,
2924 BOND_SLAVE_NOTIFY_NOW
);
2926 slave_info(bond
->dev
, slave
->dev
, "link status definitely down, disabling slave\n");
2928 if (slave
== rtnl_dereference(bond
->curr_active_slave
)) {
2929 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
2936 slave_err(bond
->dev
, slave
->dev
,
2937 "impossible: link_new_state %d on slave\n",
2938 slave
->link_new_state
);
2944 bond_select_active_slave(bond
);
2945 unblock_netpoll_tx();
2948 bond_set_carrier(bond
);
2951 /* Send ARP probes for active-backup mode ARP monitor.
2953 * Called with rcu_read_lock held.
2955 static bool bond_ab_arp_probe(struct bonding
*bond
)
2957 struct slave
*slave
, *before
= NULL
, *new_slave
= NULL
,
2958 *curr_arp_slave
= rcu_dereference(bond
->current_arp_slave
),
2959 *curr_active_slave
= rcu_dereference(bond
->curr_active_slave
);
2960 struct list_head
*iter
;
2962 bool should_notify_rtnl
= BOND_SLAVE_NOTIFY_LATER
;
2964 if (curr_arp_slave
&& curr_active_slave
)
2965 netdev_info(bond
->dev
, "PROBE: c_arp %s && cas %s BAD\n",
2966 curr_arp_slave
->dev
->name
,
2967 curr_active_slave
->dev
->name
);
2969 if (curr_active_slave
) {
2970 bond_arp_send_all(bond
, curr_active_slave
);
2971 return should_notify_rtnl
;
2974 /* if we don't have a curr_active_slave, search for the next available
2975 * backup slave from the current_arp_slave and make it the candidate
2976 * for becoming the curr_active_slave
2979 if (!curr_arp_slave
) {
2980 curr_arp_slave
= bond_first_slave_rcu(bond
);
2981 if (!curr_arp_slave
)
2982 return should_notify_rtnl
;
2985 bond_set_slave_inactive_flags(curr_arp_slave
, BOND_SLAVE_NOTIFY_LATER
);
2987 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2988 if (!found
&& !before
&& bond_slave_is_up(slave
))
2991 if (found
&& !new_slave
&& bond_slave_is_up(slave
))
2993 /* if the link state is up at this point, we
2994 * mark it down - this can happen if we have
2995 * simultaneous link failures and
2996 * reselect_active_interface doesn't make this
2997 * one the current slave so it is still marked
2998 * up when it is actually down
3000 if (!bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
) {
3001 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
3002 BOND_SLAVE_NOTIFY_LATER
);
3003 if (slave
->link_failure_count
< UINT_MAX
)
3004 slave
->link_failure_count
++;
3006 bond_set_slave_inactive_flags(slave
,
3007 BOND_SLAVE_NOTIFY_LATER
);
3009 slave_info(bond
->dev
, slave
->dev
, "backup interface is now down\n");
3011 if (slave
== curr_arp_slave
)
3015 if (!new_slave
&& before
)
3021 bond_set_slave_link_state(new_slave
, BOND_LINK_BACK
,
3022 BOND_SLAVE_NOTIFY_LATER
);
3023 bond_set_slave_active_flags(new_slave
, BOND_SLAVE_NOTIFY_LATER
);
3024 bond_arp_send_all(bond
, new_slave
);
3025 new_slave
->last_link_up
= jiffies
;
3026 rcu_assign_pointer(bond
->current_arp_slave
, new_slave
);
3029 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3030 if (slave
->should_notify
|| slave
->should_notify_link
) {
3031 should_notify_rtnl
= BOND_SLAVE_NOTIFY_NOW
;
3035 return should_notify_rtnl
;
3038 static void bond_activebackup_arp_mon(struct bonding
*bond
)
3040 bool should_notify_peers
= false;
3041 bool should_notify_rtnl
= false;
3044 delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
3046 if (!bond_has_slaves(bond
))
3051 should_notify_peers
= bond_should_notify_peers(bond
);
3053 if (bond_ab_arp_inspect(bond
)) {
3056 /* Race avoidance with bond_close flush of workqueue */
3057 if (!rtnl_trylock()) {
3059 should_notify_peers
= false;
3063 bond_ab_arp_commit(bond
);
3069 should_notify_rtnl
= bond_ab_arp_probe(bond
);
3073 if (bond
->params
.arp_interval
)
3074 queue_delayed_work(bond
->wq
, &bond
->arp_work
, delta_in_ticks
);
3076 if (should_notify_peers
|| should_notify_rtnl
) {
3077 if (!rtnl_trylock())
3080 if (should_notify_peers
)
3081 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
,
3083 if (should_notify_rtnl
) {
3084 bond_slave_state_notify(bond
);
3085 bond_slave_link_notify(bond
);
3092 static void bond_arp_monitor(struct work_struct
*work
)
3094 struct bonding
*bond
= container_of(work
, struct bonding
,
3097 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
)
3098 bond_activebackup_arp_mon(bond
);
3100 bond_loadbalance_arp_mon(bond
);
3103 /*-------------------------- netdev event handling --------------------------*/
3105 /* Change device name */
3106 static int bond_event_changename(struct bonding
*bond
)
3108 bond_remove_proc_entry(bond
);
3109 bond_create_proc_entry(bond
);
3111 bond_debug_reregister(bond
);
3116 static int bond_master_netdev_event(unsigned long event
,
3117 struct net_device
*bond_dev
)
3119 struct bonding
*event_bond
= netdev_priv(bond_dev
);
3121 netdev_dbg(bond_dev
, "%s called\n", __func__
);
3124 case NETDEV_CHANGENAME
:
3125 return bond_event_changename(event_bond
);
3126 case NETDEV_UNREGISTER
:
3127 bond_remove_proc_entry(event_bond
);
3129 case NETDEV_REGISTER
:
3130 bond_create_proc_entry(event_bond
);
3139 static int bond_slave_netdev_event(unsigned long event
,
3140 struct net_device
*slave_dev
)
3142 struct slave
*slave
= bond_slave_get_rtnl(slave_dev
), *primary
;
3143 struct bonding
*bond
;
3144 struct net_device
*bond_dev
;
3146 /* A netdev event can be generated while enslaving a device
3147 * before netdev_rx_handler_register is called in which case
3148 * slave will be NULL
3151 netdev_dbg(slave_dev
, "%s called on NULL slave\n", __func__
);
3155 bond_dev
= slave
->bond
->dev
;
3157 primary
= rtnl_dereference(bond
->primary_slave
);
3159 slave_dbg(bond_dev
, slave_dev
, "%s called\n", __func__
);
3162 case NETDEV_UNREGISTER
:
3163 if (bond_dev
->type
!= ARPHRD_ETHER
)
3164 bond_release_and_destroy(bond_dev
, slave_dev
);
3166 __bond_release_one(bond_dev
, slave_dev
, false, true);
3170 /* For 802.3ad mode only:
3171 * Getting invalid Speed/Duplex values here will put slave
3172 * in weird state. Mark it as link-fail if the link was
3173 * previously up or link-down if it hasn't yet come up, and
3174 * let link-monitoring (miimon) set it right when correct
3175 * speeds/duplex are available.
3177 if (bond_update_speed_duplex(slave
) &&
3178 BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3179 if (slave
->last_link_up
)
3180 slave
->link
= BOND_LINK_FAIL
;
3182 slave
->link
= BOND_LINK_DOWN
;
3185 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
3186 bond_3ad_adapter_speed_duplex_changed(slave
);
3189 /* Refresh slave-array if applicable!
3190 * If the setup does not use miimon or arpmon (mode-specific!),
3191 * then these events will not cause the slave-array to be
3192 * refreshed. This will cause xmit to use a slave that is not
3193 * usable. Avoid such situation by refeshing the array at these
3194 * events. If these (miimon/arpmon) parameters are configured
3195 * then array gets refreshed twice and that should be fine!
3197 if (bond_mode_can_use_xmit_hash(bond
))
3198 bond_update_slave_arr(bond
, NULL
);
3200 case NETDEV_CHANGEMTU
:
3201 /* TODO: Should slaves be allowed to
3202 * independently alter their MTU? For
3203 * an active-backup bond, slaves need
3204 * not be the same type of device, so
3205 * MTUs may vary. For other modes,
3206 * slaves arguably should have the
3207 * same MTUs. To do this, we'd need to
3208 * take over the slave's change_mtu
3209 * function for the duration of their
3213 case NETDEV_CHANGENAME
:
3214 /* we don't care if we don't have primary set */
3215 if (!bond_uses_primary(bond
) ||
3216 !bond
->params
.primary
[0])
3219 if (slave
== primary
) {
3220 /* slave's name changed - he's no longer primary */
3221 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
3222 } else if (!strcmp(slave_dev
->name
, bond
->params
.primary
)) {
3223 /* we have a new primary slave */
3224 rcu_assign_pointer(bond
->primary_slave
, slave
);
3225 } else { /* we didn't change primary - exit */
3229 netdev_info(bond
->dev
, "Primary slave changed to %s, reselecting active slave\n",
3230 primary
? slave_dev
->name
: "none");
3233 bond_select_active_slave(bond
);
3234 unblock_netpoll_tx();
3236 case NETDEV_FEAT_CHANGE
:
3237 bond_compute_features(bond
);
3239 case NETDEV_RESEND_IGMP
:
3240 /* Propagate to master device */
3241 call_netdevice_notifiers(event
, slave
->bond
->dev
);
3250 /* bond_netdev_event: handle netdev notifier chain events.
3252 * This function receives events for the netdev chain. The caller (an
3253 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3254 * locks for us to safely manipulate the slave devices (RTNL lock,
3257 static int bond_netdev_event(struct notifier_block
*this,
3258 unsigned long event
, void *ptr
)
3260 struct net_device
*event_dev
= netdev_notifier_info_to_dev(ptr
);
3262 netdev_dbg(event_dev
, "%s received %s\n",
3263 __func__
, netdev_cmd_to_name(event
));
3265 if (!(event_dev
->priv_flags
& IFF_BONDING
))
3268 if (event_dev
->flags
& IFF_MASTER
) {
3271 ret
= bond_master_netdev_event(event
, event_dev
);
3272 if (ret
!= NOTIFY_DONE
)
3276 if (event_dev
->flags
& IFF_SLAVE
)
3277 return bond_slave_netdev_event(event
, event_dev
);
3282 static struct notifier_block bond_netdev_notifier
= {
3283 .notifier_call
= bond_netdev_event
,
3286 /*---------------------------- Hashing Policies -----------------------------*/
3288 /* L2 hash helper */
3289 static inline u32
bond_eth_hash(struct sk_buff
*skb
)
3291 struct ethhdr
*ep
, hdr_tmp
;
3293 ep
= skb_header_pointer(skb
, 0, sizeof(hdr_tmp
), &hdr_tmp
);
3295 return ep
->h_dest
[5] ^ ep
->h_source
[5] ^ ep
->h_proto
;
3299 static bool bond_flow_ip(struct sk_buff
*skb
, struct flow_keys
*fk
,
3300 int *noff
, int *proto
, bool l34
)
3302 const struct ipv6hdr
*iph6
;
3303 const struct iphdr
*iph
;
3305 if (skb
->protocol
== htons(ETH_P_IP
)) {
3306 if (unlikely(!pskb_may_pull(skb
, *noff
+ sizeof(*iph
))))
3308 iph
= (const struct iphdr
*)(skb
->data
+ *noff
);
3309 iph_to_flow_copy_v4addrs(fk
, iph
);
3310 *noff
+= iph
->ihl
<< 2;
3311 if (!ip_is_fragment(iph
))
3312 *proto
= iph
->protocol
;
3313 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
3314 if (unlikely(!pskb_may_pull(skb
, *noff
+ sizeof(*iph6
))))
3316 iph6
= (const struct ipv6hdr
*)(skb
->data
+ *noff
);
3317 iph_to_flow_copy_v6addrs(fk
, iph6
);
3318 *noff
+= sizeof(*iph6
);
3319 *proto
= iph6
->nexthdr
;
3324 if (l34
&& *proto
>= 0)
3325 fk
->ports
.ports
= skb_flow_get_ports(skb
, *noff
, *proto
);
3330 /* Extract the appropriate headers based on bond's xmit policy */
3331 static bool bond_flow_dissect(struct bonding
*bond
, struct sk_buff
*skb
,
3332 struct flow_keys
*fk
)
3334 bool l34
= bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER34
;
3335 int noff
, proto
= -1;
3337 if (bond
->params
.xmit_policy
> BOND_XMIT_POLICY_LAYER23
) {
3338 memset(fk
, 0, sizeof(*fk
));
3339 return __skb_flow_dissect(NULL
, skb
, &flow_keys_bonding
,
3340 fk
, NULL
, 0, 0, 0, 0);
3343 fk
->ports
.ports
= 0;
3344 memset(&fk
->icmp
, 0, sizeof(fk
->icmp
));
3345 noff
= skb_network_offset(skb
);
3346 if (!bond_flow_ip(skb
, fk
, &noff
, &proto
, l34
))
3349 /* ICMP error packets contains at least 8 bytes of the header
3350 * of the packet which generated the error. Use this information
3351 * to correlate ICMP error packets within the same flow which
3352 * generated the error.
3354 if (proto
== IPPROTO_ICMP
|| proto
== IPPROTO_ICMPV6
) {
3355 skb_flow_get_icmp_tci(skb
, &fk
->icmp
, skb
->data
,
3356 skb_transport_offset(skb
),
3358 if (proto
== IPPROTO_ICMP
) {
3359 if (!icmp_is_err(fk
->icmp
.type
))
3362 noff
+= sizeof(struct icmphdr
);
3363 } else if (proto
== IPPROTO_ICMPV6
) {
3364 if (!icmpv6_is_err(fk
->icmp
.type
))
3367 noff
+= sizeof(struct icmp6hdr
);
3369 return bond_flow_ip(skb
, fk
, &noff
, &proto
, l34
);
3376 * bond_xmit_hash - generate a hash value based on the xmit policy
3377 * @bond: bonding device
3378 * @skb: buffer to use for headers
3380 * This function will extract the necessary headers from the skb buffer and use
3381 * them to generate a hash based on the xmit_policy set in the bonding device
3383 u32
bond_xmit_hash(struct bonding
*bond
, struct sk_buff
*skb
)
3385 struct flow_keys flow
;
3388 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_ENCAP34
&&
3392 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER2
||
3393 !bond_flow_dissect(bond
, skb
, &flow
))
3394 return bond_eth_hash(skb
);
3396 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER23
||
3397 bond
->params
.xmit_policy
== BOND_XMIT_POLICY_ENCAP23
) {
3398 hash
= bond_eth_hash(skb
);
3401 memcpy(&hash
, &flow
.icmp
, sizeof(hash
));
3403 memcpy(&hash
, &flow
.ports
.ports
, sizeof(hash
));
3405 hash
^= (__force u32
)flow_get_u32_dst(&flow
) ^
3406 (__force u32
)flow_get_u32_src(&flow
);
3407 hash
^= (hash
>> 16);
3408 hash
^= (hash
>> 8);
3413 /*-------------------------- Device entry points ----------------------------*/
3415 void bond_work_init_all(struct bonding
*bond
)
3417 INIT_DELAYED_WORK(&bond
->mcast_work
,
3418 bond_resend_igmp_join_requests_delayed
);
3419 INIT_DELAYED_WORK(&bond
->alb_work
, bond_alb_monitor
);
3420 INIT_DELAYED_WORK(&bond
->mii_work
, bond_mii_monitor
);
3421 INIT_DELAYED_WORK(&bond
->arp_work
, bond_arp_monitor
);
3422 INIT_DELAYED_WORK(&bond
->ad_work
, bond_3ad_state_machine_handler
);
3423 INIT_DELAYED_WORK(&bond
->slave_arr_work
, bond_slave_arr_handler
);
3426 static void bond_work_cancel_all(struct bonding
*bond
)
3428 cancel_delayed_work_sync(&bond
->mii_work
);
3429 cancel_delayed_work_sync(&bond
->arp_work
);
3430 cancel_delayed_work_sync(&bond
->alb_work
);
3431 cancel_delayed_work_sync(&bond
->ad_work
);
3432 cancel_delayed_work_sync(&bond
->mcast_work
);
3433 cancel_delayed_work_sync(&bond
->slave_arr_work
);
3436 static int bond_open(struct net_device
*bond_dev
)
3438 struct bonding
*bond
= netdev_priv(bond_dev
);
3439 struct list_head
*iter
;
3440 struct slave
*slave
;
3442 /* reset slave->backup and slave->inactive */
3443 if (bond_has_slaves(bond
)) {
3444 bond_for_each_slave(bond
, slave
, iter
) {
3445 if (bond_uses_primary(bond
) &&
3446 slave
!= rcu_access_pointer(bond
->curr_active_slave
)) {
3447 bond_set_slave_inactive_flags(slave
,
3448 BOND_SLAVE_NOTIFY_NOW
);
3449 } else if (BOND_MODE(bond
) != BOND_MODE_8023AD
) {
3450 bond_set_slave_active_flags(slave
,
3451 BOND_SLAVE_NOTIFY_NOW
);
3456 if (bond_is_lb(bond
)) {
3457 /* bond_alb_initialize must be called before the timer
3460 if (bond_alb_initialize(bond
, (BOND_MODE(bond
) == BOND_MODE_ALB
)))
3462 if (bond
->params
.tlb_dynamic_lb
|| BOND_MODE(bond
) == BOND_MODE_ALB
)
3463 queue_delayed_work(bond
->wq
, &bond
->alb_work
, 0);
3466 if (bond
->params
.miimon
) /* link check interval, in milliseconds. */
3467 queue_delayed_work(bond
->wq
, &bond
->mii_work
, 0);
3469 if (bond
->params
.arp_interval
) { /* arp interval, in milliseconds. */
3470 queue_delayed_work(bond
->wq
, &bond
->arp_work
, 0);
3471 bond
->recv_probe
= bond_arp_rcv
;
3474 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3475 queue_delayed_work(bond
->wq
, &bond
->ad_work
, 0);
3476 /* register to receive LACPDUs */
3477 bond
->recv_probe
= bond_3ad_lacpdu_recv
;
3478 bond_3ad_initiate_agg_selection(bond
, 1);
3481 if (bond_mode_can_use_xmit_hash(bond
))
3482 bond_update_slave_arr(bond
, NULL
);
3487 static int bond_close(struct net_device
*bond_dev
)
3489 struct bonding
*bond
= netdev_priv(bond_dev
);
3491 bond_work_cancel_all(bond
);
3492 bond
->send_peer_notif
= 0;
3493 if (bond_is_lb(bond
))
3494 bond_alb_deinitialize(bond
);
3495 bond
->recv_probe
= NULL
;
3500 /* fold stats, assuming all rtnl_link_stats64 fields are u64, but
3501 * that some drivers can provide 32bit values only.
3503 static void bond_fold_stats(struct rtnl_link_stats64
*_res
,
3504 const struct rtnl_link_stats64
*_new
,
3505 const struct rtnl_link_stats64
*_old
)
3507 const u64
*new = (const u64
*)_new
;
3508 const u64
*old
= (const u64
*)_old
;
3509 u64
*res
= (u64
*)_res
;
3512 for (i
= 0; i
< sizeof(*_res
) / sizeof(u64
); i
++) {
3515 s64 delta
= nv
- ov
;
3517 /* detects if this particular field is 32bit only */
3518 if (((nv
| ov
) >> 32) == 0)
3519 delta
= (s64
)(s32
)((u32
)nv
- (u32
)ov
);
3521 /* filter anomalies, some drivers reset their stats
3522 * at down/up events.
3529 #ifdef CONFIG_LOCKDEP
3530 static int bond_get_lowest_level_rcu(struct net_device
*dev
)
3532 struct net_device
*ldev
, *next
, *now
, *dev_stack
[MAX_NEST_DEV
+ 1];
3533 struct list_head
*niter
, *iter
, *iter_stack
[MAX_NEST_DEV
+ 1];
3534 int cur
= 0, max
= 0;
3537 iter
= &dev
->adj_list
.lower
;
3542 ldev
= netdev_next_lower_dev_rcu(now
, &iter
);
3547 niter
= &ldev
->adj_list
.lower
;
3548 dev_stack
[cur
] = now
;
3549 iter_stack
[cur
++] = iter
;
3558 next
= dev_stack
[--cur
];
3559 niter
= iter_stack
[cur
];
3570 static void bond_get_stats(struct net_device
*bond_dev
,
3571 struct rtnl_link_stats64
*stats
)
3573 struct bonding
*bond
= netdev_priv(bond_dev
);
3574 struct rtnl_link_stats64 temp
;
3575 struct list_head
*iter
;
3576 struct slave
*slave
;
3581 #ifdef CONFIG_LOCKDEP
3582 nest_level
= bond_get_lowest_level_rcu(bond_dev
);
3585 spin_lock_nested(&bond
->stats_lock
, nest_level
);
3586 memcpy(stats
, &bond
->bond_stats
, sizeof(*stats
));
3588 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3589 const struct rtnl_link_stats64
*new =
3590 dev_get_stats(slave
->dev
, &temp
);
3592 bond_fold_stats(stats
, new, &slave
->slave_stats
);
3594 /* save off the slave stats for the next run */
3595 memcpy(&slave
->slave_stats
, new, sizeof(*new));
3598 memcpy(&bond
->bond_stats
, stats
, sizeof(*stats
));
3599 spin_unlock(&bond
->stats_lock
);
3603 static int bond_do_ioctl(struct net_device
*bond_dev
, struct ifreq
*ifr
, int cmd
)
3605 struct bonding
*bond
= netdev_priv(bond_dev
);
3606 struct net_device
*slave_dev
= NULL
;
3607 struct ifbond k_binfo
;
3608 struct ifbond __user
*u_binfo
= NULL
;
3609 struct ifslave k_sinfo
;
3610 struct ifslave __user
*u_sinfo
= NULL
;
3611 struct mii_ioctl_data
*mii
= NULL
;
3612 struct bond_opt_value newval
;
3616 netdev_dbg(bond_dev
, "bond_ioctl: cmd=%d\n", cmd
);
3627 /* We do this again just in case we were called by SIOCGMIIREG
3628 * instead of SIOCGMIIPHY.
3634 if (mii
->reg_num
== 1) {
3636 if (netif_carrier_ok(bond
->dev
))
3637 mii
->val_out
= BMSR_LSTATUS
;
3641 case BOND_INFO_QUERY_OLD
:
3642 case SIOCBONDINFOQUERY
:
3643 u_binfo
= (struct ifbond __user
*)ifr
->ifr_data
;
3645 if (copy_from_user(&k_binfo
, u_binfo
, sizeof(ifbond
)))
3648 bond_info_query(bond_dev
, &k_binfo
);
3649 if (copy_to_user(u_binfo
, &k_binfo
, sizeof(ifbond
)))
3653 case BOND_SLAVE_INFO_QUERY_OLD
:
3654 case SIOCBONDSLAVEINFOQUERY
:
3655 u_sinfo
= (struct ifslave __user
*)ifr
->ifr_data
;
3657 if (copy_from_user(&k_sinfo
, u_sinfo
, sizeof(ifslave
)))
3660 res
= bond_slave_info_query(bond_dev
, &k_sinfo
);
3662 copy_to_user(u_sinfo
, &k_sinfo
, sizeof(ifslave
)))
3670 net
= dev_net(bond_dev
);
3672 if (!ns_capable(net
->user_ns
, CAP_NET_ADMIN
))
3675 slave_dev
= __dev_get_by_name(net
, ifr
->ifr_slave
);
3677 slave_dbg(bond_dev
, slave_dev
, "slave_dev=%p:\n", slave_dev
);
3683 case BOND_ENSLAVE_OLD
:
3684 case SIOCBONDENSLAVE
:
3685 res
= bond_enslave(bond_dev
, slave_dev
, NULL
);
3687 case BOND_RELEASE_OLD
:
3688 case SIOCBONDRELEASE
:
3689 res
= bond_release(bond_dev
, slave_dev
);
3691 netdev_update_lockdep_key(slave_dev
);
3693 case BOND_SETHWADDR_OLD
:
3694 case SIOCBONDSETHWADDR
:
3695 res
= bond_set_dev_addr(bond_dev
, slave_dev
);
3697 case BOND_CHANGE_ACTIVE_OLD
:
3698 case SIOCBONDCHANGEACTIVE
:
3699 bond_opt_initstr(&newval
, slave_dev
->name
);
3700 res
= __bond_opt_set_notify(bond
, BOND_OPT_ACTIVE_SLAVE
,
3710 static void bond_change_rx_flags(struct net_device
*bond_dev
, int change
)
3712 struct bonding
*bond
= netdev_priv(bond_dev
);
3714 if (change
& IFF_PROMISC
)
3715 bond_set_promiscuity(bond
,
3716 bond_dev
->flags
& IFF_PROMISC
? 1 : -1);
3718 if (change
& IFF_ALLMULTI
)
3719 bond_set_allmulti(bond
,
3720 bond_dev
->flags
& IFF_ALLMULTI
? 1 : -1);
3723 static void bond_set_rx_mode(struct net_device
*bond_dev
)
3725 struct bonding
*bond
= netdev_priv(bond_dev
);
3726 struct list_head
*iter
;
3727 struct slave
*slave
;
3730 if (bond_uses_primary(bond
)) {
3731 slave
= rcu_dereference(bond
->curr_active_slave
);
3733 dev_uc_sync(slave
->dev
, bond_dev
);
3734 dev_mc_sync(slave
->dev
, bond_dev
);
3737 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3738 dev_uc_sync_multiple(slave
->dev
, bond_dev
);
3739 dev_mc_sync_multiple(slave
->dev
, bond_dev
);
3745 static int bond_neigh_init(struct neighbour
*n
)
3747 struct bonding
*bond
= netdev_priv(n
->dev
);
3748 const struct net_device_ops
*slave_ops
;
3749 struct neigh_parms parms
;
3750 struct slave
*slave
;
3754 slave
= bond_first_slave_rcu(bond
);
3757 slave_ops
= slave
->dev
->netdev_ops
;
3758 if (!slave_ops
->ndo_neigh_setup
)
3761 /* TODO: find another way [1] to implement this.
3762 * Passing a zeroed structure is fragile,
3763 * but at least we do not pass garbage.
3765 * [1] One way would be that ndo_neigh_setup() never touch
3766 * struct neigh_parms, but propagate the new neigh_setup()
3767 * back to ___neigh_create() / neigh_parms_alloc()
3769 memset(&parms
, 0, sizeof(parms
));
3770 ret
= slave_ops
->ndo_neigh_setup(slave
->dev
, &parms
);
3775 if (parms
.neigh_setup
)
3776 ret
= parms
.neigh_setup(n
);
3782 /* The bonding ndo_neigh_setup is called at init time beofre any
3783 * slave exists. So we must declare proxy setup function which will
3784 * be used at run time to resolve the actual slave neigh param setup.
3786 * It's also called by master devices (such as vlans) to setup their
3787 * underlying devices. In that case - do nothing, we're already set up from
3790 static int bond_neigh_setup(struct net_device
*dev
,
3791 struct neigh_parms
*parms
)
3793 /* modify only our neigh_parms */
3794 if (parms
->dev
== dev
)
3795 parms
->neigh_setup
= bond_neigh_init
;
3800 /* Change the MTU of all of a master's slaves to match the master */
3801 static int bond_change_mtu(struct net_device
*bond_dev
, int new_mtu
)
3803 struct bonding
*bond
= netdev_priv(bond_dev
);
3804 struct slave
*slave
, *rollback_slave
;
3805 struct list_head
*iter
;
3808 netdev_dbg(bond_dev
, "bond=%p, new_mtu=%d\n", bond
, new_mtu
);
3810 bond_for_each_slave(bond
, slave
, iter
) {
3811 slave_dbg(bond_dev
, slave
->dev
, "s %p c_m %p\n",
3812 slave
, slave
->dev
->netdev_ops
->ndo_change_mtu
);
3814 res
= dev_set_mtu(slave
->dev
, new_mtu
);
3817 /* If we failed to set the slave's mtu to the new value
3818 * we must abort the operation even in ACTIVE_BACKUP
3819 * mode, because if we allow the backup slaves to have
3820 * different mtu values than the active slave we'll
3821 * need to change their mtu when doing a failover. That
3822 * means changing their mtu from timer context, which
3823 * is probably not a good idea.
3825 slave_dbg(bond_dev
, slave
->dev
, "err %d setting mtu to %d\n",
3831 bond_dev
->mtu
= new_mtu
;
3836 /* unwind from head to the slave that failed */
3837 bond_for_each_slave(bond
, rollback_slave
, iter
) {
3840 if (rollback_slave
== slave
)
3843 tmp_res
= dev_set_mtu(rollback_slave
->dev
, bond_dev
->mtu
);
3845 slave_dbg(bond_dev
, rollback_slave
->dev
, "unwind err %d\n",
3852 /* Change HW address
3854 * Note that many devices must be down to change the HW address, and
3855 * downing the master releases all slaves. We can make bonds full of
3856 * bonding devices to test this, however.
3858 static int bond_set_mac_address(struct net_device
*bond_dev
, void *addr
)
3860 struct bonding
*bond
= netdev_priv(bond_dev
);
3861 struct slave
*slave
, *rollback_slave
;
3862 struct sockaddr_storage
*ss
= addr
, tmp_ss
;
3863 struct list_head
*iter
;
3866 if (BOND_MODE(bond
) == BOND_MODE_ALB
)
3867 return bond_alb_set_mac_address(bond_dev
, addr
);
3870 netdev_dbg(bond_dev
, "%s: bond=%p\n", __func__
, bond
);
3872 /* If fail_over_mac is enabled, do nothing and return success.
3873 * Returning an error causes ifenslave to fail.
3875 if (bond
->params
.fail_over_mac
&&
3876 BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
)
3879 if (!is_valid_ether_addr(ss
->__data
))
3880 return -EADDRNOTAVAIL
;
3882 bond_for_each_slave(bond
, slave
, iter
) {
3883 slave_dbg(bond_dev
, slave
->dev
, "%s: slave=%p\n",
3885 res
= dev_set_mac_address(slave
->dev
, addr
, NULL
);
3887 /* TODO: consider downing the slave
3889 * User should expect communications
3890 * breakage anyway until ARP finish
3893 slave_dbg(bond_dev
, slave
->dev
, "%s: err %d\n",
3900 memcpy(bond_dev
->dev_addr
, ss
->__data
, bond_dev
->addr_len
);
3904 memcpy(tmp_ss
.__data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
3905 tmp_ss
.ss_family
= bond_dev
->type
;
3907 /* unwind from head to the slave that failed */
3908 bond_for_each_slave(bond
, rollback_slave
, iter
) {
3911 if (rollback_slave
== slave
)
3914 tmp_res
= dev_set_mac_address(rollback_slave
->dev
,
3915 (struct sockaddr
*)&tmp_ss
, NULL
);
3917 slave_dbg(bond_dev
, rollback_slave
->dev
, "%s: unwind err %d\n",
3926 * bond_xmit_slave_id - transmit skb through slave with slave_id
3927 * @bond: bonding device that is transmitting
3928 * @skb: buffer to transmit
3929 * @slave_id: slave id up to slave_cnt-1 through which to transmit
3931 * This function tries to transmit through slave with slave_id but in case
3932 * it fails, it tries to find the first available slave for transmission.
3933 * The skb is consumed in all cases, thus the function is void.
3935 static void bond_xmit_slave_id(struct bonding
*bond
, struct sk_buff
*skb
, int slave_id
)
3937 struct list_head
*iter
;
3938 struct slave
*slave
;
3941 /* Here we start from the slave with slave_id */
3942 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3944 if (bond_slave_can_tx(slave
)) {
3945 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3951 /* Here we start from the first slave up to slave_id */
3953 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3956 if (bond_slave_can_tx(slave
)) {
3957 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3961 /* no slave that can tx has been found */
3962 bond_tx_drop(bond
->dev
, skb
);
3966 * bond_rr_gen_slave_id - generate slave id based on packets_per_slave
3967 * @bond: bonding device to use
3969 * Based on the value of the bonding device's packets_per_slave parameter
3970 * this function generates a slave id, which is usually used as the next
3971 * slave to transmit through.
3973 static u32
bond_rr_gen_slave_id(struct bonding
*bond
)
3976 struct reciprocal_value reciprocal_packets_per_slave
;
3977 int packets_per_slave
= bond
->params
.packets_per_slave
;
3979 switch (packets_per_slave
) {
3981 slave_id
= prandom_u32();
3984 slave_id
= bond
->rr_tx_counter
;
3987 reciprocal_packets_per_slave
=
3988 bond
->params
.reciprocal_packets_per_slave
;
3989 slave_id
= reciprocal_divide(bond
->rr_tx_counter
,
3990 reciprocal_packets_per_slave
);
3993 bond
->rr_tx_counter
++;
3998 static netdev_tx_t
bond_xmit_roundrobin(struct sk_buff
*skb
,
3999 struct net_device
*bond_dev
)
4001 struct bonding
*bond
= netdev_priv(bond_dev
);
4002 struct slave
*slave
;
4006 /* Start with the curr_active_slave that joined the bond as the
4007 * default for sending IGMP traffic. For failover purposes one
4008 * needs to maintain some consistency for the interface that will
4009 * send the join/membership reports. The curr_active_slave found
4010 * will send all of this type of traffic.
4012 if (skb
->protocol
== htons(ETH_P_IP
)) {
4013 int noff
= skb_network_offset(skb
);
4016 if (unlikely(!pskb_may_pull(skb
, noff
+ sizeof(*iph
))))
4020 if (iph
->protocol
== IPPROTO_IGMP
) {
4021 slave
= rcu_dereference(bond
->curr_active_slave
);
4023 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4025 bond_xmit_slave_id(bond
, skb
, 0);
4026 return NETDEV_TX_OK
;
4031 slave_cnt
= READ_ONCE(bond
->slave_cnt
);
4032 if (likely(slave_cnt
)) {
4033 slave_id
= bond_rr_gen_slave_id(bond
);
4034 bond_xmit_slave_id(bond
, skb
, slave_id
% slave_cnt
);
4036 bond_tx_drop(bond_dev
, skb
);
4038 return NETDEV_TX_OK
;
4041 /* In active-backup mode, we know that bond->curr_active_slave is always valid if
4042 * the bond has a usable interface.
4044 static netdev_tx_t
bond_xmit_activebackup(struct sk_buff
*skb
,
4045 struct net_device
*bond_dev
)
4047 struct bonding
*bond
= netdev_priv(bond_dev
);
4048 struct slave
*slave
;
4050 slave
= rcu_dereference(bond
->curr_active_slave
);
4052 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4054 bond_tx_drop(bond_dev
, skb
);
4056 return NETDEV_TX_OK
;
4059 /* Use this to update slave_array when (a) it's not appropriate to update
4060 * slave_array right away (note that update_slave_array() may sleep)
4061 * and / or (b) RTNL is not held.
4063 void bond_slave_arr_work_rearm(struct bonding
*bond
, unsigned long delay
)
4065 queue_delayed_work(bond
->wq
, &bond
->slave_arr_work
, delay
);
4068 /* Slave array work handler. Holds only RTNL */
4069 static void bond_slave_arr_handler(struct work_struct
*work
)
4071 struct bonding
*bond
= container_of(work
, struct bonding
,
4072 slave_arr_work
.work
);
4075 if (!rtnl_trylock())
4078 ret
= bond_update_slave_arr(bond
, NULL
);
4081 pr_warn_ratelimited("Failed to update slave array from WT\n");
4087 bond_slave_arr_work_rearm(bond
, 1);
4090 /* Build the usable slaves array in control path for modes that use xmit-hash
4091 * to determine the slave interface -
4092 * (a) BOND_MODE_8023AD
4094 * (c) (BOND_MODE_TLB || BOND_MODE_ALB) && tlb_dynamic_lb == 0
4096 * The caller is expected to hold RTNL only and NO other lock!
4098 int bond_update_slave_arr(struct bonding
*bond
, struct slave
*skipslave
)
4100 struct slave
*slave
;
4101 struct list_head
*iter
;
4102 struct bond_up_slave
*new_arr
, *old_arr
;
4106 #ifdef CONFIG_LOCKDEP
4107 WARN_ON(lockdep_is_held(&bond
->mode_lock
));
4110 new_arr
= kzalloc(offsetof(struct bond_up_slave
, arr
[bond
->slave_cnt
]),
4114 pr_err("Failed to build slave-array.\n");
4117 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
4118 struct ad_info ad_info
;
4120 if (bond_3ad_get_active_agg_info(bond
, &ad_info
)) {
4121 pr_debug("bond_3ad_get_active_agg_info failed\n");
4122 kfree_rcu(new_arr
, rcu
);
4123 /* No active aggragator means it's not safe to use
4124 * the previous array.
4126 old_arr
= rtnl_dereference(bond
->slave_arr
);
4128 RCU_INIT_POINTER(bond
->slave_arr
, NULL
);
4129 kfree_rcu(old_arr
, rcu
);
4133 agg_id
= ad_info
.aggregator_id
;
4135 bond_for_each_slave(bond
, slave
, iter
) {
4136 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
4137 struct aggregator
*agg
;
4139 agg
= SLAVE_AD_INFO(slave
)->port
.aggregator
;
4140 if (!agg
|| agg
->aggregator_identifier
!= agg_id
)
4143 if (!bond_slave_can_tx(slave
))
4145 if (skipslave
== slave
)
4148 slave_dbg(bond
->dev
, slave
->dev
, "Adding slave to tx hash array[%d]\n",
4151 new_arr
->arr
[new_arr
->count
++] = slave
;
4154 old_arr
= rtnl_dereference(bond
->slave_arr
);
4155 rcu_assign_pointer(bond
->slave_arr
, new_arr
);
4157 kfree_rcu(old_arr
, rcu
);
4159 if (ret
!= 0 && skipslave
) {
4162 /* Rare situation where caller has asked to skip a specific
4163 * slave but allocation failed (most likely!). BTW this is
4164 * only possible when the call is initiated from
4165 * __bond_release_one(). In this situation; overwrite the
4166 * skipslave entry in the array with the last entry from the
4167 * array to avoid a situation where the xmit path may choose
4168 * this to-be-skipped slave to send a packet out.
4170 old_arr
= rtnl_dereference(bond
->slave_arr
);
4171 for (idx
= 0; old_arr
!= NULL
&& idx
< old_arr
->count
; idx
++) {
4172 if (skipslave
== old_arr
->arr
[idx
]) {
4174 old_arr
->arr
[old_arr
->count
-1];
4183 /* Use this Xmit function for 3AD as well as XOR modes. The current
4184 * usable slave array is formed in the control path. The xmit function
4185 * just calculates hash and sends the packet out.
4187 static netdev_tx_t
bond_3ad_xor_xmit(struct sk_buff
*skb
,
4188 struct net_device
*dev
)
4190 struct bonding
*bond
= netdev_priv(dev
);
4191 struct slave
*slave
;
4192 struct bond_up_slave
*slaves
;
4195 slaves
= rcu_dereference(bond
->slave_arr
);
4196 count
= slaves
? READ_ONCE(slaves
->count
) : 0;
4197 if (likely(count
)) {
4198 slave
= slaves
->arr
[bond_xmit_hash(bond
, skb
) % count
];
4199 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4201 bond_tx_drop(dev
, skb
);
4204 return NETDEV_TX_OK
;
4207 /* in broadcast mode, we send everything to all usable interfaces. */
4208 static netdev_tx_t
bond_xmit_broadcast(struct sk_buff
*skb
,
4209 struct net_device
*bond_dev
)
4211 struct bonding
*bond
= netdev_priv(bond_dev
);
4212 struct slave
*slave
= NULL
;
4213 struct list_head
*iter
;
4215 bond_for_each_slave_rcu(bond
, slave
, iter
) {
4216 if (bond_is_last_slave(bond
, slave
))
4218 if (bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
) {
4219 struct sk_buff
*skb2
= skb_clone(skb
, GFP_ATOMIC
);
4222 net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
4223 bond_dev
->name
, __func__
);
4226 bond_dev_queue_xmit(bond
, skb2
, slave
->dev
);
4229 if (slave
&& bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
)
4230 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4232 bond_tx_drop(bond_dev
, skb
);
4234 return NETDEV_TX_OK
;
4237 /*------------------------- Device initialization ---------------------------*/
4239 /* Lookup the slave that corresponds to a qid */
4240 static inline int bond_slave_override(struct bonding
*bond
,
4241 struct sk_buff
*skb
)
4243 struct slave
*slave
= NULL
;
4244 struct list_head
*iter
;
4246 if (!skb_rx_queue_recorded(skb
))
4249 /* Find out if any slaves have the same mapping as this skb. */
4250 bond_for_each_slave_rcu(bond
, slave
, iter
) {
4251 if (slave
->queue_id
== skb_get_queue_mapping(skb
)) {
4252 if (bond_slave_is_up(slave
) &&
4253 slave
->link
== BOND_LINK_UP
) {
4254 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4257 /* If the slave isn't UP, use default transmit policy. */
4266 static u16
bond_select_queue(struct net_device
*dev
, struct sk_buff
*skb
,
4267 struct net_device
*sb_dev
)
4269 /* This helper function exists to help dev_pick_tx get the correct
4270 * destination queue. Using a helper function skips a call to
4271 * skb_tx_hash and will put the skbs in the queue we expect on their
4272 * way down to the bonding driver.
4274 u16 txq
= skb_rx_queue_recorded(skb
) ? skb_get_rx_queue(skb
) : 0;
4276 /* Save the original txq to restore before passing to the driver */
4277 qdisc_skb_cb(skb
)->slave_dev_queue_mapping
= skb_get_queue_mapping(skb
);
4279 if (unlikely(txq
>= dev
->real_num_tx_queues
)) {
4281 txq
-= dev
->real_num_tx_queues
;
4282 } while (txq
>= dev
->real_num_tx_queues
);
4287 static netdev_tx_t
__bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4289 struct bonding
*bond
= netdev_priv(dev
);
4291 if (bond_should_override_tx_queue(bond
) &&
4292 !bond_slave_override(bond
, skb
))
4293 return NETDEV_TX_OK
;
4295 switch (BOND_MODE(bond
)) {
4296 case BOND_MODE_ROUNDROBIN
:
4297 return bond_xmit_roundrobin(skb
, dev
);
4298 case BOND_MODE_ACTIVEBACKUP
:
4299 return bond_xmit_activebackup(skb
, dev
);
4300 case BOND_MODE_8023AD
:
4302 return bond_3ad_xor_xmit(skb
, dev
);
4303 case BOND_MODE_BROADCAST
:
4304 return bond_xmit_broadcast(skb
, dev
);
4306 return bond_alb_xmit(skb
, dev
);
4308 return bond_tlb_xmit(skb
, dev
);
4310 /* Should never happen, mode already checked */
4311 netdev_err(dev
, "Unknown bonding mode %d\n", BOND_MODE(bond
));
4313 bond_tx_drop(dev
, skb
);
4314 return NETDEV_TX_OK
;
4318 static netdev_tx_t
bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4320 struct bonding
*bond
= netdev_priv(dev
);
4321 netdev_tx_t ret
= NETDEV_TX_OK
;
4323 /* If we risk deadlock from transmitting this in the
4324 * netpoll path, tell netpoll to queue the frame for later tx
4326 if (unlikely(is_netpoll_tx_blocked(dev
)))
4327 return NETDEV_TX_BUSY
;
4330 if (bond_has_slaves(bond
))
4331 ret
= __bond_start_xmit(skb
, dev
);
4333 bond_tx_drop(dev
, skb
);
4339 static int bond_ethtool_get_link_ksettings(struct net_device
*bond_dev
,
4340 struct ethtool_link_ksettings
*cmd
)
4342 struct bonding
*bond
= netdev_priv(bond_dev
);
4343 unsigned long speed
= 0;
4344 struct list_head
*iter
;
4345 struct slave
*slave
;
4347 cmd
->base
.duplex
= DUPLEX_UNKNOWN
;
4348 cmd
->base
.port
= PORT_OTHER
;
4350 /* Since bond_slave_can_tx returns false for all inactive or down slaves, we
4351 * do not need to check mode. Though link speed might not represent
4352 * the true receive or transmit bandwidth (not all modes are symmetric)
4353 * this is an accurate maximum.
4355 bond_for_each_slave(bond
, slave
, iter
) {
4356 if (bond_slave_can_tx(slave
)) {
4357 if (slave
->speed
!= SPEED_UNKNOWN
)
4358 speed
+= slave
->speed
;
4359 if (cmd
->base
.duplex
== DUPLEX_UNKNOWN
&&
4360 slave
->duplex
!= DUPLEX_UNKNOWN
)
4361 cmd
->base
.duplex
= slave
->duplex
;
4364 cmd
->base
.speed
= speed
? : SPEED_UNKNOWN
;
4369 static void bond_ethtool_get_drvinfo(struct net_device
*bond_dev
,
4370 struct ethtool_drvinfo
*drvinfo
)
4372 strlcpy(drvinfo
->driver
, DRV_NAME
, sizeof(drvinfo
->driver
));
4373 snprintf(drvinfo
->fw_version
, sizeof(drvinfo
->fw_version
), "%d",
4377 static const struct ethtool_ops bond_ethtool_ops
= {
4378 .get_drvinfo
= bond_ethtool_get_drvinfo
,
4379 .get_link
= ethtool_op_get_link
,
4380 .get_link_ksettings
= bond_ethtool_get_link_ksettings
,
4383 static const struct net_device_ops bond_netdev_ops
= {
4384 .ndo_init
= bond_init
,
4385 .ndo_uninit
= bond_uninit
,
4386 .ndo_open
= bond_open
,
4387 .ndo_stop
= bond_close
,
4388 .ndo_start_xmit
= bond_start_xmit
,
4389 .ndo_select_queue
= bond_select_queue
,
4390 .ndo_get_stats64
= bond_get_stats
,
4391 .ndo_do_ioctl
= bond_do_ioctl
,
4392 .ndo_change_rx_flags
= bond_change_rx_flags
,
4393 .ndo_set_rx_mode
= bond_set_rx_mode
,
4394 .ndo_change_mtu
= bond_change_mtu
,
4395 .ndo_set_mac_address
= bond_set_mac_address
,
4396 .ndo_neigh_setup
= bond_neigh_setup
,
4397 .ndo_vlan_rx_add_vid
= bond_vlan_rx_add_vid
,
4398 .ndo_vlan_rx_kill_vid
= bond_vlan_rx_kill_vid
,
4399 #ifdef CONFIG_NET_POLL_CONTROLLER
4400 .ndo_netpoll_setup
= bond_netpoll_setup
,
4401 .ndo_netpoll_cleanup
= bond_netpoll_cleanup
,
4402 .ndo_poll_controller
= bond_poll_controller
,
4404 .ndo_add_slave
= bond_enslave
,
4405 .ndo_del_slave
= bond_release
,
4406 .ndo_fix_features
= bond_fix_features
,
4407 .ndo_features_check
= passthru_features_check
,
4410 static const struct device_type bond_type
= {
4414 static void bond_destructor(struct net_device
*bond_dev
)
4416 struct bonding
*bond
= netdev_priv(bond_dev
);
4418 destroy_workqueue(bond
->wq
);
4421 void bond_setup(struct net_device
*bond_dev
)
4423 struct bonding
*bond
= netdev_priv(bond_dev
);
4425 spin_lock_init(&bond
->mode_lock
);
4426 bond
->params
= bonding_defaults
;
4428 /* Initialize pointers */
4429 bond
->dev
= bond_dev
;
4431 /* Initialize the device entry points */
4432 ether_setup(bond_dev
);
4433 bond_dev
->max_mtu
= ETH_MAX_MTU
;
4434 bond_dev
->netdev_ops
= &bond_netdev_ops
;
4435 bond_dev
->ethtool_ops
= &bond_ethtool_ops
;
4437 bond_dev
->needs_free_netdev
= true;
4438 bond_dev
->priv_destructor
= bond_destructor
;
4440 SET_NETDEV_DEVTYPE(bond_dev
, &bond_type
);
4442 /* Initialize the device options */
4443 bond_dev
->flags
|= IFF_MASTER
;
4444 bond_dev
->priv_flags
|= IFF_BONDING
| IFF_UNICAST_FLT
| IFF_NO_QUEUE
;
4445 bond_dev
->priv_flags
&= ~(IFF_XMIT_DST_RELEASE
| IFF_TX_SKB_SHARING
);
4447 /* don't acquire bond device's netif_tx_lock when transmitting */
4448 bond_dev
->features
|= NETIF_F_LLTX
;
4450 /* By default, we declare the bond to be fully
4451 * VLAN hardware accelerated capable. Special
4452 * care is taken in the various xmit functions
4453 * when there are slaves that are not hw accel
4457 /* Don't allow bond devices to change network namespaces. */
4458 bond_dev
->features
|= NETIF_F_NETNS_LOCAL
;
4460 bond_dev
->hw_features
= BOND_VLAN_FEATURES
|
4461 NETIF_F_HW_VLAN_CTAG_RX
|
4462 NETIF_F_HW_VLAN_CTAG_FILTER
;
4464 bond_dev
->hw_features
|= NETIF_F_GSO_ENCAP_ALL
| NETIF_F_GSO_UDP_L4
;
4465 bond_dev
->features
|= bond_dev
->hw_features
;
4466 bond_dev
->features
|= NETIF_F_HW_VLAN_CTAG_TX
| NETIF_F_HW_VLAN_STAG_TX
;
4469 /* Destroy a bonding device.
4470 * Must be under rtnl_lock when this function is called.
4472 static void bond_uninit(struct net_device
*bond_dev
)
4474 struct bonding
*bond
= netdev_priv(bond_dev
);
4475 struct list_head
*iter
;
4476 struct slave
*slave
;
4477 struct bond_up_slave
*arr
;
4479 bond_netpoll_cleanup(bond_dev
);
4481 /* Release the bonded slaves */
4482 bond_for_each_slave(bond
, slave
, iter
)
4483 __bond_release_one(bond_dev
, slave
->dev
, true, true);
4484 netdev_info(bond_dev
, "Released all slaves\n");
4486 arr
= rtnl_dereference(bond
->slave_arr
);
4488 RCU_INIT_POINTER(bond
->slave_arr
, NULL
);
4489 kfree_rcu(arr
, rcu
);
4492 list_del(&bond
->bond_list
);
4494 lockdep_unregister_key(&bond
->stats_lock_key
);
4495 bond_debug_unregister(bond
);
4498 /*------------------------- Module initialization ---------------------------*/
4500 static int bond_check_params(struct bond_params
*params
)
4502 int arp_validate_value
, fail_over_mac_value
, primary_reselect_value
, i
;
4503 struct bond_opt_value newval
;
4504 const struct bond_opt_value
*valptr
;
4505 int arp_all_targets_value
= 0;
4506 u16 ad_actor_sys_prio
= 0;
4507 u16 ad_user_port_key
= 0;
4508 __be32 arp_target
[BOND_MAX_ARP_TARGETS
] = { 0 };
4510 int bond_mode
= BOND_MODE_ROUNDROBIN
;
4511 int xmit_hashtype
= BOND_XMIT_POLICY_LAYER2
;
4515 /* Convert string parameters. */
4517 bond_opt_initstr(&newval
, mode
);
4518 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_MODE
), &newval
);
4520 pr_err("Error: Invalid bonding mode \"%s\"\n", mode
);
4523 bond_mode
= valptr
->value
;
4526 if (xmit_hash_policy
) {
4527 if (bond_mode
== BOND_MODE_ROUNDROBIN
||
4528 bond_mode
== BOND_MODE_ACTIVEBACKUP
||
4529 bond_mode
== BOND_MODE_BROADCAST
) {
4530 pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
4531 bond_mode_name(bond_mode
));
4533 bond_opt_initstr(&newval
, xmit_hash_policy
);
4534 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH
),
4537 pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
4541 xmit_hashtype
= valptr
->value
;
4546 if (bond_mode
!= BOND_MODE_8023AD
) {
4547 pr_info("lacp_rate param is irrelevant in mode %s\n",
4548 bond_mode_name(bond_mode
));
4550 bond_opt_initstr(&newval
, lacp_rate
);
4551 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE
),
4554 pr_err("Error: Invalid lacp rate \"%s\"\n",
4558 lacp_fast
= valptr
->value
;
4563 bond_opt_initstr(&newval
, ad_select
);
4564 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT
),
4567 pr_err("Error: Invalid ad_select \"%s\"\n", ad_select
);
4570 params
->ad_select
= valptr
->value
;
4571 if (bond_mode
!= BOND_MODE_8023AD
)
4572 pr_warn("ad_select param only affects 802.3ad mode\n");
4574 params
->ad_select
= BOND_AD_STABLE
;
4577 if (max_bonds
< 0) {
4578 pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4579 max_bonds
, 0, INT_MAX
, BOND_DEFAULT_MAX_BONDS
);
4580 max_bonds
= BOND_DEFAULT_MAX_BONDS
;
4584 pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4590 pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4595 if (downdelay
< 0) {
4596 pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4597 downdelay
, INT_MAX
);
4601 if ((use_carrier
!= 0) && (use_carrier
!= 1)) {
4602 pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
4607 if (num_peer_notif
< 0 || num_peer_notif
> 255) {
4608 pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
4613 /* reset values for 802.3ad/TLB/ALB */
4614 if (!bond_mode_uses_arp(bond_mode
)) {
4616 pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
4617 pr_warn("Forcing miimon to 100msec\n");
4618 miimon
= BOND_DEFAULT_MIIMON
;
4622 if (tx_queues
< 1 || tx_queues
> 255) {
4623 pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
4624 tx_queues
, BOND_DEFAULT_TX_QUEUES
);
4625 tx_queues
= BOND_DEFAULT_TX_QUEUES
;
4628 if ((all_slaves_active
!= 0) && (all_slaves_active
!= 1)) {
4629 pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
4631 all_slaves_active
= 0;
4634 if (resend_igmp
< 0 || resend_igmp
> 255) {
4635 pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
4636 resend_igmp
, BOND_DEFAULT_RESEND_IGMP
);
4637 resend_igmp
= BOND_DEFAULT_RESEND_IGMP
;
4640 bond_opt_initval(&newval
, packets_per_slave
);
4641 if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE
), &newval
)) {
4642 pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n",
4643 packets_per_slave
, USHRT_MAX
);
4644 packets_per_slave
= 1;
4647 if (bond_mode
== BOND_MODE_ALB
) {
4648 pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
4653 if (updelay
|| downdelay
) {
4654 /* just warn the user the up/down delay will have
4655 * no effect since miimon is zero...
4657 pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
4658 updelay
, downdelay
);
4661 /* don't allow arp monitoring */
4663 pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
4664 miimon
, arp_interval
);
4668 if ((updelay
% miimon
) != 0) {
4669 pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
4670 updelay
, miimon
, (updelay
/ miimon
) * miimon
);
4675 if ((downdelay
% miimon
) != 0) {
4676 pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
4678 (downdelay
/ miimon
) * miimon
);
4681 downdelay
/= miimon
;
4684 if (arp_interval
< 0) {
4685 pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4686 arp_interval
, INT_MAX
);
4690 for (arp_ip_count
= 0, i
= 0;
4691 (arp_ip_count
< BOND_MAX_ARP_TARGETS
) && arp_ip_target
[i
]; i
++) {
4694 /* not a complete check, but good enough to catch mistakes */
4695 if (!in4_pton(arp_ip_target
[i
], -1, (u8
*)&ip
, -1, NULL
) ||
4696 !bond_is_ip_target_ok(ip
)) {
4697 pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
4701 if (bond_get_targets_ip(arp_target
, ip
) == -1)
4702 arp_target
[arp_ip_count
++] = ip
;
4704 pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
4709 if (arp_interval
&& !arp_ip_count
) {
4710 /* don't allow arping if no arp_ip_target given... */
4711 pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
4717 if (!arp_interval
) {
4718 pr_err("arp_validate requires arp_interval\n");
4722 bond_opt_initstr(&newval
, arp_validate
);
4723 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE
),
4726 pr_err("Error: invalid arp_validate \"%s\"\n",
4730 arp_validate_value
= valptr
->value
;
4732 arp_validate_value
= 0;
4735 if (arp_all_targets
) {
4736 bond_opt_initstr(&newval
, arp_all_targets
);
4737 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS
),
4740 pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
4742 arp_all_targets_value
= 0;
4744 arp_all_targets_value
= valptr
->value
;
4749 pr_info("MII link monitoring set to %d ms\n", miimon
);
4750 } else if (arp_interval
) {
4751 valptr
= bond_opt_get_val(BOND_OPT_ARP_VALIDATE
,
4752 arp_validate_value
);
4753 pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
4754 arp_interval
, valptr
->string
, arp_ip_count
);
4756 for (i
= 0; i
< arp_ip_count
; i
++)
4757 pr_cont(" %s", arp_ip_target
[i
]);
4761 } else if (max_bonds
) {
4762 /* miimon and arp_interval not set, we need one so things
4763 * work as expected, see bonding.txt for details
4765 pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
4768 if (primary
&& !bond_mode_uses_primary(bond_mode
)) {
4769 /* currently, using a primary only makes sense
4770 * in active backup, TLB or ALB modes
4772 pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
4773 primary
, bond_mode_name(bond_mode
));
4777 if (primary
&& primary_reselect
) {
4778 bond_opt_initstr(&newval
, primary_reselect
);
4779 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT
),
4782 pr_err("Error: Invalid primary_reselect \"%s\"\n",
4786 primary_reselect_value
= valptr
->value
;
4788 primary_reselect_value
= BOND_PRI_RESELECT_ALWAYS
;
4791 if (fail_over_mac
) {
4792 bond_opt_initstr(&newval
, fail_over_mac
);
4793 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC
),
4796 pr_err("Error: invalid fail_over_mac \"%s\"\n",
4800 fail_over_mac_value
= valptr
->value
;
4801 if (bond_mode
!= BOND_MODE_ACTIVEBACKUP
)
4802 pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
4804 fail_over_mac_value
= BOND_FOM_NONE
;
4807 bond_opt_initstr(&newval
, "default");
4808 valptr
= bond_opt_parse(
4809 bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO
),
4812 pr_err("Error: No ad_actor_sys_prio default value");
4815 ad_actor_sys_prio
= valptr
->value
;
4817 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY
),
4820 pr_err("Error: No ad_user_port_key default value");
4823 ad_user_port_key
= valptr
->value
;
4825 bond_opt_initstr(&newval
, "default");
4826 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB
), &newval
);
4828 pr_err("Error: No tlb_dynamic_lb default value");
4831 tlb_dynamic_lb
= valptr
->value
;
4833 if (lp_interval
== 0) {
4834 pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
4835 INT_MAX
, BOND_ALB_DEFAULT_LP_INTERVAL
);
4836 lp_interval
= BOND_ALB_DEFAULT_LP_INTERVAL
;
4839 /* fill params struct with the proper values */
4840 params
->mode
= bond_mode
;
4841 params
->xmit_policy
= xmit_hashtype
;
4842 params
->miimon
= miimon
;
4843 params
->num_peer_notif
= num_peer_notif
;
4844 params
->arp_interval
= arp_interval
;
4845 params
->arp_validate
= arp_validate_value
;
4846 params
->arp_all_targets
= arp_all_targets_value
;
4847 params
->updelay
= updelay
;
4848 params
->downdelay
= downdelay
;
4849 params
->peer_notif_delay
= 0;
4850 params
->use_carrier
= use_carrier
;
4851 params
->lacp_fast
= lacp_fast
;
4852 params
->primary
[0] = 0;
4853 params
->primary_reselect
= primary_reselect_value
;
4854 params
->fail_over_mac
= fail_over_mac_value
;
4855 params
->tx_queues
= tx_queues
;
4856 params
->all_slaves_active
= all_slaves_active
;
4857 params
->resend_igmp
= resend_igmp
;
4858 params
->min_links
= min_links
;
4859 params
->lp_interval
= lp_interval
;
4860 params
->packets_per_slave
= packets_per_slave
;
4861 params
->tlb_dynamic_lb
= tlb_dynamic_lb
;
4862 params
->ad_actor_sys_prio
= ad_actor_sys_prio
;
4863 eth_zero_addr(params
->ad_actor_system
);
4864 params
->ad_user_port_key
= ad_user_port_key
;
4865 if (packets_per_slave
> 0) {
4866 params
->reciprocal_packets_per_slave
=
4867 reciprocal_value(packets_per_slave
);
4869 /* reciprocal_packets_per_slave is unused if
4870 * packets_per_slave is 0 or 1, just initialize it
4872 params
->reciprocal_packets_per_slave
=
4873 (struct reciprocal_value
) { 0 };
4877 strncpy(params
->primary
, primary
, IFNAMSIZ
);
4878 params
->primary
[IFNAMSIZ
- 1] = 0;
4881 memcpy(params
->arp_targets
, arp_target
, sizeof(arp_target
));
4886 /* Called from registration process */
4887 static int bond_init(struct net_device
*bond_dev
)
4889 struct bonding
*bond
= netdev_priv(bond_dev
);
4890 struct bond_net
*bn
= net_generic(dev_net(bond_dev
), bond_net_id
);
4892 netdev_dbg(bond_dev
, "Begin bond_init\n");
4894 bond
->wq
= alloc_ordered_workqueue(bond_dev
->name
, WQ_MEM_RECLAIM
);
4898 spin_lock_init(&bond
->stats_lock
);
4899 lockdep_register_key(&bond
->stats_lock_key
);
4900 lockdep_set_class(&bond
->stats_lock
, &bond
->stats_lock_key
);
4902 list_add_tail(&bond
->bond_list
, &bn
->dev_list
);
4904 bond_prepare_sysfs_group(bond
);
4906 bond_debug_register(bond
);
4908 /* Ensure valid dev_addr */
4909 if (is_zero_ether_addr(bond_dev
->dev_addr
) &&
4910 bond_dev
->addr_assign_type
== NET_ADDR_PERM
)
4911 eth_hw_addr_random(bond_dev
);
4916 unsigned int bond_get_num_tx_queues(void)
4921 /* Create a new bond based on the specified name and bonding parameters.
4922 * If name is NULL, obtain a suitable "bond%d" name for us.
4923 * Caller must NOT hold rtnl_lock; we need to release it here before we
4924 * set up our sysfs entries.
4926 int bond_create(struct net
*net
, const char *name
)
4928 struct net_device
*bond_dev
;
4929 struct bonding
*bond
;
4930 struct alb_bond_info
*bond_info
;
4935 bond_dev
= alloc_netdev_mq(sizeof(struct bonding
),
4936 name
? name
: "bond%d", NET_NAME_UNKNOWN
,
4937 bond_setup
, tx_queues
);
4939 pr_err("%s: eek! can't alloc netdev!\n", name
);
4945 * Initialize rx_hashtbl_used_head to RLB_NULL_INDEX.
4946 * It is set to 0 by default which is wrong.
4948 bond
= netdev_priv(bond_dev
);
4949 bond_info
= &(BOND_ALB_INFO(bond
));
4950 bond_info
->rx_hashtbl_used_head
= RLB_NULL_INDEX
;
4952 dev_net_set(bond_dev
, net
);
4953 bond_dev
->rtnl_link_ops
= &bond_link_ops
;
4955 res
= register_netdevice(bond_dev
);
4957 netif_carrier_off(bond_dev
);
4959 bond_work_init_all(bond
);
4963 free_netdev(bond_dev
);
4967 static int __net_init
bond_net_init(struct net
*net
)
4969 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
4972 INIT_LIST_HEAD(&bn
->dev_list
);
4974 bond_create_proc_dir(bn
);
4975 bond_create_sysfs(bn
);
4980 static void __net_exit
bond_net_exit(struct net
*net
)
4982 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
4983 struct bonding
*bond
, *tmp_bond
;
4986 bond_destroy_sysfs(bn
);
4988 /* Kill off any bonds created after unregistering bond rtnl ops */
4990 list_for_each_entry_safe(bond
, tmp_bond
, &bn
->dev_list
, bond_list
)
4991 unregister_netdevice_queue(bond
->dev
, &list
);
4992 unregister_netdevice_many(&list
);
4995 bond_destroy_proc_dir(bn
);
4998 static struct pernet_operations bond_net_ops
= {
4999 .init
= bond_net_init
,
5000 .exit
= bond_net_exit
,
5002 .size
= sizeof(struct bond_net
),
5005 static int __init
bonding_init(void)
5010 res
= bond_check_params(&bonding_defaults
);
5014 res
= register_pernet_subsys(&bond_net_ops
);
5018 res
= bond_netlink_init();
5022 bond_create_debugfs();
5024 for (i
= 0; i
< max_bonds
; i
++) {
5025 res
= bond_create(&init_net
, NULL
);
5030 skb_flow_dissector_init(&flow_keys_bonding
,
5031 flow_keys_bonding_keys
,
5032 ARRAY_SIZE(flow_keys_bonding_keys
));
5034 register_netdevice_notifier(&bond_netdev_notifier
);
5038 bond_destroy_debugfs();
5039 bond_netlink_fini();
5041 unregister_pernet_subsys(&bond_net_ops
);
5046 static void __exit
bonding_exit(void)
5048 unregister_netdevice_notifier(&bond_netdev_notifier
);
5050 bond_destroy_debugfs();
5052 bond_netlink_fini();
5053 unregister_pernet_subsys(&bond_net_ops
);
5055 #ifdef CONFIG_NET_POLL_CONTROLLER
5056 /* Make sure we don't have an imbalance on our netpoll blocking */
5057 WARN_ON(atomic_read(&netpoll_block_tx
));
5061 module_init(bonding_init
);
5062 module_exit(bonding_exit
);
5063 MODULE_LICENSE("GPL");
5064 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
5065 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");