gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / net / ethernet / intel / igb / e1000_mbx.h
blob178e60ec71d46ef8ac3434754909d106226d8871
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* Copyright(c) 2007 - 2018 Intel Corporation. */
4 #ifndef _E1000_MBX_H_
5 #define _E1000_MBX_H_
7 #include "e1000_hw.h"
9 #define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
10 #define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
11 #define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
12 #define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
13 #define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
15 #define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
16 #define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
17 #define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
18 #define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
20 #define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
22 /* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
23 * PF. The reverse is true if it is E1000_PF_*.
24 * Message ACK's are the value or'd with 0xF0000000
26 /* Messages below or'd with this are the ACK */
27 #define E1000_VT_MSGTYPE_ACK 0x80000000
28 /* Messages below or'd with this are the NACK */
29 #define E1000_VT_MSGTYPE_NACK 0x40000000
30 /* Indicates that VF is still clear to send requests */
31 #define E1000_VT_MSGTYPE_CTS 0x20000000
32 #define E1000_VT_MSGINFO_SHIFT 16
33 /* bits 23:16 are used for exra info for certain messages */
34 #define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
36 #define E1000_VF_RESET 0x01 /* VF requests reset */
37 #define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
38 /* VF requests to clear all unicast MAC filters */
39 #define E1000_VF_MAC_FILTER_CLR (0x01 << E1000_VT_MSGINFO_SHIFT)
40 /* VF requests to add unicast MAC filter */
41 #define E1000_VF_MAC_FILTER_ADD (0x02 << E1000_VT_MSGINFO_SHIFT)
42 #define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
43 #define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
44 #define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
45 #define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
46 #define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
48 #define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
50 s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id,
51 bool unlock);
52 s32 igb_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id);
53 s32 igb_check_for_msg(struct e1000_hw *hw, u16 mbx_id);
54 s32 igb_check_for_ack(struct e1000_hw *hw, u16 mbx_id);
55 s32 igb_check_for_rst(struct e1000_hw *hw, u16 mbx_id);
56 s32 igb_unlock_mbx(struct e1000_hw *hw, u16 mbx_id);
57 s32 igb_init_mbx_params_pf(struct e1000_hw *hw);
59 #endif /* _E1000_MBX_H_ */