gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / net / ethernet / moxa / moxart_ether.h
blobbf4c3029cd0cbe7b0ec1b9bf1b31ff70a27a0086
1 /* MOXA ART Ethernet (RTL8201CP) driver.
3 * Copyright (C) 2013 Jonas Jensen
5 * Jonas Jensen <jonas.jensen@gmail.com>
7 * Based on code from
8 * Moxa Technology Co., Ltd. <www.moxa.com>
10 * This file is licensed under the terms of the GNU General Public
11 * License version 2. This program is licensed "as is" without any
12 * warranty of any kind, whether express or implied.
15 #ifndef _MOXART_ETHERNET_H
16 #define _MOXART_ETHERNET_H
18 #define TX_REG_OFFSET_DESC0 0
19 #define TX_REG_OFFSET_DESC1 4
20 #define TX_REG_OFFSET_DESC2 8
21 #define TX_REG_DESC_SIZE 16
23 #define RX_REG_OFFSET_DESC0 0
24 #define RX_REG_OFFSET_DESC1 4
25 #define RX_REG_OFFSET_DESC2 8
26 #define RX_REG_DESC_SIZE 16
28 #define TX_DESC0_PKT_LATE_COL 0x1 /* abort, late collision */
29 #define TX_DESC0_RX_PKT_EXS_COL 0x2 /* abort, >16 collisions */
30 #define TX_DESC0_DMA_OWN 0x80000000 /* owned by controller */
31 #define TX_DESC1_BUF_SIZE_MASK 0x7ff
32 #define TX_DESC1_LTS 0x8000000 /* last TX packet */
33 #define TX_DESC1_FTS 0x10000000 /* first TX packet */
34 #define TX_DESC1_FIFO_COMPLETE 0x20000000
35 #define TX_DESC1_INTR_COMPLETE 0x40000000
36 #define TX_DESC1_END 0x80000000
37 #define TX_DESC2_ADDRESS_PHYS 0
38 #define TX_DESC2_ADDRESS_VIRT 4
40 #define RX_DESC0_FRAME_LEN 0
41 #define RX_DESC0_FRAME_LEN_MASK 0x7FF
42 #define RX_DESC0_MULTICAST 0x10000
43 #define RX_DESC0_BROADCAST 0x20000
44 #define RX_DESC0_ERR 0x40000
45 #define RX_DESC0_CRC_ERR 0x80000
46 #define RX_DESC0_FTL 0x100000
47 #define RX_DESC0_RUNT 0x200000 /* packet less than 64 bytes */
48 #define RX_DESC0_ODD_NB 0x400000 /* receive odd nibbles */
49 #define RX_DESC0_LRS 0x10000000 /* last receive segment */
50 #define RX_DESC0_FRS 0x20000000 /* first receive segment */
51 #define RX_DESC0_DMA_OWN 0x80000000
52 #define RX_DESC1_BUF_SIZE_MASK 0x7FF
53 #define RX_DESC1_END 0x80000000
54 #define RX_DESC2_ADDRESS_PHYS 0
55 #define RX_DESC2_ADDRESS_VIRT 4
57 #define TX_DESC_NUM 64
58 #define TX_DESC_NUM_MASK (TX_DESC_NUM - 1)
59 #define TX_NEXT(N) (((N) + 1) & (TX_DESC_NUM_MASK))
60 #define TX_BUF_SIZE 1600
61 #define TX_BUF_SIZE_MAX (TX_DESC1_BUF_SIZE_MASK + 1)
62 #define TX_WAKE_THRESHOLD 16
64 #define RX_DESC_NUM 64
65 #define RX_DESC_NUM_MASK (RX_DESC_NUM - 1)
66 #define RX_NEXT(N) (((N) + 1) & (RX_DESC_NUM_MASK))
67 #define RX_BUF_SIZE 1600
68 #define RX_BUF_SIZE_MAX (RX_DESC1_BUF_SIZE_MASK + 1)
70 #define REG_INTERRUPT_STATUS 0
71 #define REG_INTERRUPT_MASK 4
72 #define REG_MAC_MS_ADDRESS 8
73 #define REG_MAC_LS_ADDRESS 12
74 #define REG_MCAST_HASH_TABLE0 16
75 #define REG_MCAST_HASH_TABLE1 20
76 #define REG_TX_POLL_DEMAND 24
77 #define REG_RX_POLL_DEMAND 28
78 #define REG_TXR_BASE_ADDRESS 32
79 #define REG_RXR_BASE_ADDRESS 36
80 #define REG_INT_TIMER_CTRL 40
81 #define REG_APOLL_TIMER_CTRL 44
82 #define REG_DMA_BLEN_CTRL 48
83 #define REG_RESERVED1 52
84 #define REG_MAC_CTRL 136
85 #define REG_MAC_STATUS 140
86 #define REG_PHY_CTRL 144
87 #define REG_PHY_WRITE_DATA 148
88 #define REG_FLOW_CTRL 152
89 #define REG_BACK_PRESSURE 156
90 #define REG_RESERVED2 160
91 #define REG_TEST_SEED 196
92 #define REG_DMA_FIFO_STATE 200
93 #define REG_TEST_MODE 204
94 #define REG_RESERVED3 208
95 #define REG_TX_COL_COUNTER 212
96 #define REG_RPF_AEP_COUNTER 216
97 #define REG_XM_PG_COUNTER 220
98 #define REG_RUNT_TLC_COUNTER 224
99 #define REG_CRC_FTL_COUNTER 228
100 #define REG_RLC_RCC_COUNTER 232
101 #define REG_BROC_COUNTER 236
102 #define REG_MULCA_COUNTER 240
103 #define REG_RP_COUNTER 244
104 #define REG_XP_COUNTER 248
106 #define REG_PHY_CTRL_OFFSET 0x0
107 #define REG_PHY_STATUS 0x1
108 #define REG_PHY_ID1 0x2
109 #define REG_PHY_ID2 0x3
110 #define REG_PHY_ANA 0x4
111 #define REG_PHY_ANLPAR 0x5
112 #define REG_PHY_ANE 0x6
113 #define REG_PHY_ECTRL1 0x10
114 #define REG_PHY_QPDS 0x11
115 #define REG_PHY_10BOP 0x12
116 #define REG_PHY_ECTRL2 0x13
117 #define REG_PHY_FTMAC100_WRITE 0x8000000
118 #define REG_PHY_FTMAC100_READ 0x4000000
120 /* REG_INTERRUPT_STATUS */
121 #define RPKT_FINISH BIT(0) /* DMA data received */
122 #define NORXBUF BIT(1) /* receive buffer unavailable */
123 #define XPKT_FINISH BIT(2) /* DMA moved data to TX FIFO */
124 #define NOTXBUF BIT(3) /* transmit buffer unavailable */
125 #define XPKT_OK_INT_STS BIT(4) /* transmit to ethernet success */
126 #define XPKT_LOST_INT_STS BIT(5) /* transmit ethernet lost (collision) */
127 #define RPKT_SAV BIT(6) /* FIFO receive success */
128 #define RPKT_LOST_INT_STS BIT(7) /* FIFO full, receive failed */
129 #define AHB_ERR BIT(8) /* AHB error */
130 #define PHYSTS_CHG BIT(9) /* PHY link status change */
132 /* REG_INTERRUPT_MASK */
133 #define RPKT_FINISH_M BIT(0)
134 #define NORXBUF_M BIT(1)
135 #define XPKT_FINISH_M BIT(2)
136 #define NOTXBUF_M BIT(3)
137 #define XPKT_OK_M BIT(4)
138 #define XPKT_LOST_M BIT(5)
139 #define RPKT_SAV_M BIT(6)
140 #define RPKT_LOST_M BIT(7)
141 #define AHB_ERR_M BIT(8)
142 #define PHYSTS_CHG_M BIT(9)
144 /* REG_MAC_MS_ADDRESS */
145 #define MAC_MADR_MASK 0xffff /* 2 MSB MAC address */
147 /* REG_INT_TIMER_CTRL */
148 #define TXINT_TIME_SEL BIT(15) /* TX cycle time period */
149 #define TXINT_THR_MASK 0x7000
150 #define TXINT_CNT_MASK 0xf00
151 #define RXINT_TIME_SEL BIT(7) /* RX cycle time period */
152 #define RXINT_THR_MASK 0x70
153 #define RXINT_CNT_MASK 0xF
155 /* REG_APOLL_TIMER_CTRL */
156 #define TXPOLL_TIME_SEL BIT(12) /* TX poll time period */
157 #define TXPOLL_CNT_MASK 0xf00
158 #define TXPOLL_CNT_SHIFT_BIT 8
159 #define RXPOLL_TIME_SEL BIT(4) /* RX poll time period */
160 #define RXPOLL_CNT_MASK 0xF
161 #define RXPOLL_CNT_SHIFT_BIT 0
163 /* REG_DMA_BLEN_CTRL */
164 #define RX_THR_EN BIT(9) /* RX FIFO threshold arbitration */
165 #define RXFIFO_HTHR_MASK 0x1c0
166 #define RXFIFO_LTHR_MASK 0x38
167 #define INCR16_EN BIT(2) /* AHB bus INCR16 burst command */
168 #define INCR8_EN BIT(1) /* AHB bus INCR8 burst command */
169 #define INCR4_EN BIT(0) /* AHB bus INCR4 burst command */
171 /* REG_MAC_CTRL */
172 #define RX_BROADPKT BIT(17) /* receive broadcast packets */
173 #define RX_MULTIPKT BIT(16) /* receive all multicast packets */
174 #define FULLDUP BIT(15) /* full duplex */
175 #define CRC_APD BIT(14) /* append CRC to transmitted packet */
176 #define RCV_ALL BIT(12) /* ignore incoming packet destination */
177 #define RX_FTL BIT(11) /* accept packets larger than 1518 B */
178 #define RX_RUNT BIT(10) /* accept packets smaller than 64 B */
179 #define HT_MULTI_EN BIT(9) /* accept on hash and mcast pass */
180 #define RCV_EN BIT(8) /* receiver enable */
181 #define ENRX_IN_HALFTX BIT(6) /* enable receive in half duplex mode */
182 #define XMT_EN BIT(5) /* transmit enable */
183 #define CRC_DIS BIT(4) /* disable CRC check when receiving */
184 #define LOOP_EN BIT(3) /* internal loop-back */
185 #define SW_RST BIT(2) /* software reset, last 64 AHB clocks */
186 #define RDMA_EN BIT(1) /* enable receive DMA chan */
187 #define XDMA_EN BIT(0) /* enable transmit DMA chan */
189 /* REG_MAC_STATUS */
190 #define COL_EXCEED BIT(11) /* more than 16 collisions */
191 #define LATE_COL BIT(10) /* transmit late collision detected */
192 #define XPKT_LOST BIT(9) /* transmit to ethernet lost */
193 #define XPKT_OK BIT(8) /* transmit to ethernet success */
194 #define RUNT_MAC_STS BIT(7) /* receive runt detected */
195 #define FTL_MAC_STS BIT(6) /* receive frame too long detected */
196 #define CRC_ERR_MAC_STS BIT(5)
197 #define RPKT_LOST BIT(4) /* RX FIFO full, receive failed */
198 #define RPKT_SAVE BIT(3) /* RX FIFO receive success */
199 #define COL BIT(2) /* collision, incoming packet dropped */
200 #define MCPU_BROADCAST BIT(1)
201 #define MCPU_MULTICAST BIT(0)
203 /* REG_PHY_CTRL */
204 #define MIIWR BIT(27) /* init write sequence (auto cleared)*/
205 #define MIIRD BIT(26)
206 #define REGAD_MASK 0x3e00000
207 #define PHYAD_MASK 0x1f0000
208 #define MIIRDATA_MASK 0xffff
210 /* REG_PHY_WRITE_DATA */
211 #define MIIWDATA_MASK 0xffff
213 /* REG_FLOW_CTRL */
214 #define PAUSE_TIME_MASK 0xffff0000
215 #define FC_HIGH_MASK 0xf000
216 #define FC_LOW_MASK 0xf00
217 #define RX_PAUSE BIT(4) /* receive pause frame */
218 #define TX_PAUSED BIT(3) /* transmit pause due to receive */
219 #define FCTHR_EN BIT(2) /* enable threshold mode. */
220 #define TX_PAUSE BIT(1) /* transmit pause frame */
221 #define FC_EN BIT(0) /* flow control mode enable */
223 /* REG_BACK_PRESSURE */
224 #define BACKP_LOW_MASK 0xf00
225 #define BACKP_JAM_LEN_MASK 0xf0
226 #define BACKP_MODE BIT(1) /* address mode */
227 #define BACKP_ENABLE BIT(0)
229 /* REG_TEST_SEED */
230 #define TEST_SEED_MASK 0x3fff
232 /* REG_DMA_FIFO_STATE */
233 #define TX_DMA_REQUEST BIT(31)
234 #define RX_DMA_REQUEST BIT(30)
235 #define TX_DMA_GRANT BIT(29)
236 #define RX_DMA_GRANT BIT(28)
237 #define TX_FIFO_EMPTY BIT(27)
238 #define RX_FIFO_EMPTY BIT(26)
239 #define TX_DMA2_SM_MASK 0x7000
240 #define TX_DMA1_SM_MASK 0xf00
241 #define RX_DMA2_SM_MASK 0x70
242 #define RX_DMA1_SM_MASK 0xF
244 /* REG_TEST_MODE */
245 #define SINGLE_PKT BIT(26) /* single packet mode */
246 #define PTIMER_TEST BIT(25) /* automatic polling timer test mode */
247 #define ITIMER_TEST BIT(24) /* interrupt timer test mode */
248 #define TEST_SEED_SELECT BIT(22)
249 #define SEED_SELECT BIT(21)
250 #define TEST_MODE BIT(20)
251 #define TEST_TIME_MASK 0xffc00
252 #define TEST_EXCEL_MASK 0x3e0
254 /* REG_TX_COL_COUNTER */
255 #define TX_MCOL_MASK 0xffff0000
256 #define TX_MCOL_SHIFT_BIT 16
257 #define TX_SCOL_MASK 0xffff
258 #define TX_SCOL_SHIFT_BIT 0
260 /* REG_RPF_AEP_COUNTER */
261 #define RPF_MASK 0xffff0000
262 #define RPF_SHIFT_BIT 16
263 #define AEP_MASK 0xffff
264 #define AEP_SHIFT_BIT 0
266 /* REG_XM_PG_COUNTER */
267 #define XM_MASK 0xffff0000
268 #define XM_SHIFT_BIT 16
269 #define PG_MASK 0xffff
270 #define PG_SHIFT_BIT 0
272 /* REG_RUNT_TLC_COUNTER */
273 #define RUNT_CNT_MASK 0xffff0000
274 #define RUNT_CNT_SHIFT_BIT 16
275 #define TLCC_MASK 0xffff
276 #define TLCC_SHIFT_BIT 0
278 /* REG_CRC_FTL_COUNTER */
279 #define CRCER_CNT_MASK 0xffff0000
280 #define CRCER_CNT_SHIFT_BIT 16
281 #define FTL_CNT_MASK 0xffff
282 #define FTL_CNT_SHIFT_BIT 0
284 /* REG_RLC_RCC_COUNTER */
285 #define RLC_MASK 0xffff0000
286 #define RLC_SHIFT_BIT 16
287 #define RCC_MASK 0xffff
288 #define RCC_SHIFT_BIT 0
290 /* REG_PHY_STATUS */
291 #define AN_COMPLETE 0x20
292 #define LINK_STATUS 0x4
294 struct moxart_mac_priv_t {
295 struct platform_device *pdev;
296 void __iomem *base;
297 unsigned int reg_maccr;
298 unsigned int reg_imr;
299 struct napi_struct napi;
300 struct net_device *ndev;
302 dma_addr_t rx_base;
303 dma_addr_t rx_mapping[RX_DESC_NUM];
304 void *rx_desc_base;
305 unsigned char *rx_buf_base;
306 unsigned char *rx_buf[RX_DESC_NUM];
307 unsigned int rx_head;
308 unsigned int rx_buf_size;
310 dma_addr_t tx_base;
311 dma_addr_t tx_mapping[TX_DESC_NUM];
312 void *tx_desc_base;
313 unsigned char *tx_buf_base;
314 unsigned char *tx_buf[RX_DESC_NUM];
315 unsigned int tx_head;
316 unsigned int tx_buf_size;
318 spinlock_t txlock;
319 unsigned int tx_len[TX_DESC_NUM];
320 struct sk_buff *tx_skb[TX_DESC_NUM];
321 unsigned int tx_tail;
324 #if TX_BUF_SIZE >= TX_BUF_SIZE_MAX
325 #error MOXA ART Ethernet device driver TX buffer is too large!
326 #endif
327 #if RX_BUF_SIZE >= RX_BUF_SIZE_MAX
328 #error MOXA ART Ethernet device driver RX buffer is too large!
329 #endif
331 #endif