drivers/net/wireless/marvell/libertas/if_spi.h

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  *      linux/drivers/net/wireless/libertas/if_spi.c
   4  *
   5  *      Driver for Marvell SPI WLAN cards.
   6  *
   7  *      Copyright 2008 Analog Devices Inc.
   8  *
   9  *      Authors:
  10  *      Andrey Yurovsky <andrey@cozybit.com>
  11  *      Colin McCabe <colin@cozybit.com>
  12  */
  13
  14 #ifndef _LBS_IF_SPI_H_
  15 #define _LBS_IF_SPI_H_
  16
  17 #define IPFIELD_ALIGN_OFFSET 2
  18 #define IF_SPI_CMD_BUF_SIZE 2400
  19
  20 /***************** Firmware *****************/
  21
  22 #define IF_SPI_FW_NAME_MAX 30
  23
  24 #define MAX_MAIN_FW_LOAD_CRC_ERR 10
  25
  26 /* Chunk size when loading the helper firmware */
  27 #define HELPER_FW_LOAD_CHUNK_SZ 64
  28
  29 /* Value to write to indicate end of helper firmware dnld */
  30 #define FIRMWARE_DNLD_OK 0x0000
  31
  32 /* Value to check once the main firmware is downloaded */
  33 #define SUCCESSFUL_FW_DOWNLOAD_MAGIC 0x88888888
  34
  35 /***************** SPI Interface Unit *****************/
  36 /* Masks used in SPI register read/write operations */
  37 #define IF_SPI_READ_OPERATION_MASK 0x0
  38 #define IF_SPI_WRITE_OPERATION_MASK 0x8000
  39
  40 /* SPI register offsets. 4-byte aligned. */
  41 #define IF_SPI_DEVICEID_CTRL_REG 0x00   /* DeviceID controller reg */
  42 #define IF_SPI_IO_READBASE_REG 0x04     /* Read I/O base reg */
  43 #define IF_SPI_IO_WRITEBASE_REG 0x08    /* Write I/O base reg */
  44 #define IF_SPI_IO_RDWRPORT_REG 0x0C     /* Read/Write I/O port reg */
  45
  46 #define IF_SPI_CMD_READBASE_REG 0x10    /* Read command base reg */
  47 #define IF_SPI_CMD_WRITEBASE_REG 0x14   /* Write command base reg */
  48 #define IF_SPI_CMD_RDWRPORT_REG 0x18    /* Read/Write command port reg */
  49
  50 #define IF_SPI_DATA_READBASE_REG 0x1C   /* Read data base reg */
  51 #define IF_SPI_DATA_WRITEBASE_REG 0x20  /* Write data base reg */
  52 #define IF_SPI_DATA_RDWRPORT_REG 0x24   /* Read/Write data port reg */
  53
  54 #define IF_SPI_SCRATCH_1_REG 0x28       /* Scratch reg 1 */
  55 #define IF_SPI_SCRATCH_2_REG 0x2C       /* Scratch reg 2 */
  56 #define IF_SPI_SCRATCH_3_REG 0x30       /* Scratch reg 3 */
  57 #define IF_SPI_SCRATCH_4_REG 0x34       /* Scratch reg 4 */
  58
  59 #define IF_SPI_TX_FRAME_SEQ_NUM_REG 0x38 /* Tx frame sequence number reg */
  60 #define IF_SPI_TX_FRAME_STATUS_REG 0x3C /* Tx frame status reg */
  61
  62 #define IF_SPI_HOST_INT_CTRL_REG 0x40   /* Host interrupt controller reg */
  63
  64 #define IF_SPI_CARD_INT_CAUSE_REG 0x44  /* Card interrupt cause reg */
  65 #define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */
  66 #define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */
  67 #define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */
  68
  69 #define IF_SPI_CARD_INT_RESET_SELECT_REG 0x54 /* Card interrupt reset select */
  70
  71 #define IF_SPI_HOST_INT_CAUSE_REG 0x58  /* Host interrupt cause reg */
  72 #define IF_SPI_HOST_INT_STATUS_REG 0x5C /* Host interrupt status reg */
  73 #define IF_SPI_HOST_INT_EVENT_MASK_REG 0x60 /* Host interrupt event mask */
  74 #define IF_SPI_HOST_INT_STATUS_MASK_REG 0x64 /* Host interrupt status mask */
  75 #define IF_SPI_HOST_INT_RESET_SELECT_REG 0x68 /* Host interrupt reset select */
  76
  77 #define IF_SPI_DELAY_READ_REG 0x6C      /* Delay read reg */
  78 #define IF_SPI_SPU_BUS_MODE_REG 0x70    /* SPU BUS mode reg */
  79
  80 /***************** IF_SPI_DEVICEID_CTRL_REG *****************/
  81 #define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dc) ((dc & 0xffff0000)>>16)
  82 #define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff)
  83
  84 /***************** IF_SPI_HOST_INT_CTRL_REG *****************/
  85 /* Host Interrupt Control bit : Wake up */
  86 #define IF_SPI_HICT_WAKE_UP                             (1<<0)
  87 /* Host Interrupt Control bit : WLAN ready */
  88 #define IF_SPI_HICT_WLAN_READY                          (1<<1)
  89 /*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY             (1<<2) */
  90 /*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY            (1<<3) */
  91 /*#define IF_SPI_HICT_IRQSRC_WLAN                       (1<<4) */
  92 /* Host Interrupt Control bit : Tx auto download */
  93 #define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO               (1<<5)
  94 /* Host Interrupt Control bit : Rx auto upload */
  95 #define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO                 (1<<6)
  96 /* Host Interrupt Control bit : Command auto download */
  97 #define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO              (1<<7)
  98 /* Host Interrupt Control bit : Command auto upload */
  99 #define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO                (1<<8)
 100
 101 /***************** IF_SPI_CARD_INT_CAUSE_REG *****************/
 102 /* Card Interrupt Case bit : Tx download over */
 103 #define IF_SPI_CIC_TX_DOWNLOAD_OVER                     (1<<0)
 104 /* Card Interrupt Case bit : Rx upload over */
 105 #define IF_SPI_CIC_RX_UPLOAD_OVER                       (1<<1)
 106 /* Card Interrupt Case bit : Command download over */
 107 #define IF_SPI_CIC_CMD_DOWNLOAD_OVER                    (1<<2)
 108 /* Card Interrupt Case bit : Host event */
 109 #define IF_SPI_CIC_HOST_EVENT                           (1<<3)
 110 /* Card Interrupt Case bit : Command upload over */
 111 #define IF_SPI_CIC_CMD_UPLOAD_OVER                      (1<<4)
 112 /* Card Interrupt Case bit : Power down */
 113 #define IF_SPI_CIC_POWER_DOWN                           (1<<5)
 114
 115 /***************** IF_SPI_CARD_INT_STATUS_REG *****************/
 116 #define IF_SPI_CIS_TX_DOWNLOAD_OVER                     (1<<0)
 117 #define IF_SPI_CIS_RX_UPLOAD_OVER                       (1<<1)
 118 #define IF_SPI_CIS_CMD_DOWNLOAD_OVER                    (1<<2)
 119 #define IF_SPI_CIS_HOST_EVENT                           (1<<3)
 120 #define IF_SPI_CIS_CMD_UPLOAD_OVER                      (1<<4)
 121 #define IF_SPI_CIS_POWER_DOWN                           (1<<5)
 122
 123 /***************** IF_SPI_HOST_INT_CAUSE_REG *****************/
 124 #define IF_SPI_HICU_TX_DOWNLOAD_RDY                     (1<<0)
 125 #define IF_SPI_HICU_RX_UPLOAD_RDY                       (1<<1)
 126 #define IF_SPI_HICU_CMD_DOWNLOAD_RDY                    (1<<2)
 127 #define IF_SPI_HICU_CARD_EVENT                          (1<<3)
 128 #define IF_SPI_HICU_CMD_UPLOAD_RDY                      (1<<4)
 129 #define IF_SPI_HICU_IO_WR_FIFO_OVERFLOW                 (1<<5)
 130 #define IF_SPI_HICU_IO_RD_FIFO_UNDERFLOW                (1<<6)
 131 #define IF_SPI_HICU_DATA_WR_FIFO_OVERFLOW               (1<<7)
 132 #define IF_SPI_HICU_DATA_RD_FIFO_UNDERFLOW              (1<<8)
 133 #define IF_SPI_HICU_CMD_WR_FIFO_OVERFLOW                (1<<9)
 134 #define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW               (1<<10)
 135
 136 /***************** IF_SPI_HOST_INT_STATUS_REG *****************/
 137 /* Host Interrupt Status bit : Tx download ready */
 138 #define IF_SPI_HIST_TX_DOWNLOAD_RDY                     (1<<0)
 139 /* Host Interrupt Status bit : Rx upload ready */
 140 #define IF_SPI_HIST_RX_UPLOAD_RDY                       (1<<1)
 141 /* Host Interrupt Status bit : Command download ready */
 142 #define IF_SPI_HIST_CMD_DOWNLOAD_RDY                    (1<<2)
 143 /* Host Interrupt Status bit : Card event */
 144 #define IF_SPI_HIST_CARD_EVENT                          (1<<3)
 145 /* Host Interrupt Status bit : Command upload ready */
 146 #define IF_SPI_HIST_CMD_UPLOAD_RDY                      (1<<4)
 147 /* Host Interrupt Status bit : I/O write FIFO overflow */
 148 #define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW                 (1<<5)
 149 /* Host Interrupt Status bit : I/O read FIFO underflow */
 150 #define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW                 (1<<6)
 151 /* Host Interrupt Status bit : Data write FIFO overflow */
 152 #define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW               (1<<7)
 153 /* Host Interrupt Status bit : Data read FIFO underflow */
 154 #define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW              (1<<8)
 155 /* Host Interrupt Status bit : Command write FIFO overflow */
 156 #define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW                (1<<9)
 157 /* Host Interrupt Status bit : Command read FIFO underflow */
 158 #define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW               (1<<10)
 159
 160 /***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/
 161 /* Host Interrupt Status Mask bit : Tx download ready */
 162 #define IF_SPI_HISM_TX_DOWNLOAD_RDY                     (1<<0)
 163 /* Host Interrupt Status Mask bit : Rx upload ready */
 164 #define IF_SPI_HISM_RX_UPLOAD_RDY                       (1<<1)
 165 /* Host Interrupt Status Mask bit : Command download ready */
 166 #define IF_SPI_HISM_CMD_DOWNLOAD_RDY                    (1<<2)
 167 /* Host Interrupt Status Mask bit : Card event */
 168 #define IF_SPI_HISM_CARDEVENT                           (1<<3)
 169 /* Host Interrupt Status Mask bit : Command upload ready */
 170 #define IF_SPI_HISM_CMD_UPLOAD_RDY                      (1<<4)
 171 /* Host Interrupt Status Mask bit : I/O write FIFO overflow */
 172 #define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW                 (1<<5)
 173 /* Host Interrupt Status Mask bit : I/O read FIFO underflow */
 174 #define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW                (1<<6)
 175 /* Host Interrupt Status Mask bit : Data write FIFO overflow */
 176 #define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW               (1<<7)
 177 /* Host Interrupt Status Mask bit : Data write FIFO underflow */
 178 #define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW              (1<<8)
 179 /* Host Interrupt Status Mask bit : Command write FIFO overflow */
 180 #define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW                (1<<9)
 181 /* Host Interrupt Status Mask bit : Command write FIFO underflow */
 182 #define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW               (1<<10)
 183
 184 /***************** IF_SPI_SPU_BUS_MODE_REG *****************/
 185 /* SCK edge on which the WLAN module outputs data on MISO */
 186 #define IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_FALLING 0x8
 187 #define IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING 0x0
 188
 189 /* In a SPU read operation, there is a delay between writing the SPU
 190  * register name and getting back data from the WLAN module.
 191  * This can be specified in terms of nanoseconds or in terms of dummy
 192  * clock cycles which the master must output before receiving a response. */
 193 #define IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK 0x4
 194 #define IF_SPI_BUS_MODE_DELAY_METHOD_TIMED 0x0
 195
 196 /* Some different modes of SPI operation */
 197 #define IF_SPI_BUS_MODE_8_BIT_ADDRESS_16_BIT_DATA 0x00
 198 #define IF_SPI_BUS_MODE_8_BIT_ADDRESS_32_BIT_DATA 0x01
 199 #define IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA 0x02
 200 #define IF_SPI_BUS_MODE_16_BIT_ADDRESS_32_BIT_DATA 0x03
 201
 202 #endif