gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / nfc / st21nfca / se.c
blob6586378cacb05ed6b80bcc8c9c350010f7e88905
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
4 */
6 #include <net/nfc/hci.h>
8 #include "st21nfca.h"
10 #define ST21NFCA_EVT_UICC_ACTIVATE 0x10
11 #define ST21NFCA_EVT_UICC_DEACTIVATE 0x13
12 #define ST21NFCA_EVT_SE_HARD_RESET 0x20
13 #define ST21NFCA_EVT_SE_SOFT_RESET 0x11
14 #define ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER 0x21
15 #define ST21NFCA_EVT_SE_ACTIVATE 0x22
16 #define ST21NFCA_EVT_SE_DEACTIVATE 0x23
18 #define ST21NFCA_EVT_TRANSMIT_DATA 0x10
19 #define ST21NFCA_EVT_WTX_REQUEST 0x11
21 #define ST21NFCA_EVT_CONNECTIVITY 0x10
22 #define ST21NFCA_EVT_TRANSACTION 0x12
24 #define ST21NFCA_SE_TO_HOT_PLUG 1000
25 /* Connectivity pipe only */
26 #define ST21NFCA_SE_COUNT_PIPE_UICC 0x01
27 /* Connectivity + APDU Reader pipe */
28 #define ST21NFCA_SE_COUNT_PIPE_EMBEDDED 0x02
30 #define ST21NFCA_SE_MODE_OFF 0x00
31 #define ST21NFCA_SE_MODE_ON 0x01
33 #define ST21NFCA_PARAM_ATR 0x01
34 #define ST21NFCA_ATR_DEFAULT_BWI 0x04
37 * WT = 2^BWI/10[s], convert into msecs and add a secure
38 * room by increasing by 2 this timeout
40 #define ST21NFCA_BWI_TO_TIMEOUT(x) ((1 << x) * 200)
41 #define ST21NFCA_ATR_GET_Y_FROM_TD(x) (x >> 4)
43 /* If TA is present bit 0 is set */
44 #define ST21NFCA_ATR_TA_PRESENT(x) (x & 0x01)
45 /* If TB is present bit 1 is set */
46 #define ST21NFCA_ATR_TB_PRESENT(x) (x & 0x02)
48 static u8 st21nfca_se_get_bwi(struct nfc_hci_dev *hdev)
50 int i;
51 u8 td;
52 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
54 /* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
55 for (i = 1; i < ST21NFCA_ESE_MAX_LENGTH; i++) {
56 td = ST21NFCA_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
57 if (ST21NFCA_ATR_TA_PRESENT(td))
58 i++;
59 if (ST21NFCA_ATR_TB_PRESENT(td)) {
60 i++;
61 return info->se_info.atr[i] >> 4;
64 return ST21NFCA_ATR_DEFAULT_BWI;
67 static void st21nfca_se_get_atr(struct nfc_hci_dev *hdev)
69 int r;
70 struct sk_buff *skb;
71 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
73 r = nfc_hci_get_param(hdev, ST21NFCA_APDU_READER_GATE,
74 ST21NFCA_PARAM_ATR, &skb);
75 if (r < 0)
76 return;
78 if (skb->len <= ST21NFCA_ESE_MAX_LENGTH) {
79 memcpy(info->se_info.atr, skb->data, skb->len);
80 info->se_info.wt_timeout =
81 ST21NFCA_BWI_TO_TIMEOUT(st21nfca_se_get_bwi(hdev));
83 kfree_skb(skb);
86 static int st21nfca_hci_control_se(struct nfc_hci_dev *hdev, u32 se_idx,
87 u8 state)
89 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
90 int r, i;
91 struct sk_buff *sk_host_list;
92 u8 se_event, host_id;
94 switch (se_idx) {
95 case NFC_HCI_UICC_HOST_ID:
96 se_event = (state == ST21NFCA_SE_MODE_ON ?
97 ST21NFCA_EVT_UICC_ACTIVATE :
98 ST21NFCA_EVT_UICC_DEACTIVATE);
100 info->se_info.count_pipes = 0;
101 info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_UICC;
102 break;
103 case ST21NFCA_ESE_HOST_ID:
104 se_event = (state == ST21NFCA_SE_MODE_ON ?
105 ST21NFCA_EVT_SE_ACTIVATE :
106 ST21NFCA_EVT_SE_DEACTIVATE);
108 info->se_info.count_pipes = 0;
109 info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_EMBEDDED;
110 break;
111 default:
112 return -EINVAL;
116 * Wait for an EVT_HOT_PLUG in order to
117 * retrieve a relevant host list.
119 reinit_completion(&info->se_info.req_completion);
120 r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, se_event,
121 NULL, 0);
122 if (r < 0)
123 return r;
125 mod_timer(&info->se_info.se_active_timer, jiffies +
126 msecs_to_jiffies(ST21NFCA_SE_TO_HOT_PLUG));
127 info->se_info.se_active = true;
129 /* Ignore return value and check in any case the host_list */
130 wait_for_completion_interruptible(&info->se_info.req_completion);
132 r = nfc_hci_get_param(hdev, NFC_HCI_ADMIN_GATE,
133 NFC_HCI_ADMIN_HOST_LIST,
134 &sk_host_list);
135 if (r < 0)
136 return r;
138 for (i = 0; i < sk_host_list->len &&
139 sk_host_list->data[i] != se_idx; i++)
141 host_id = sk_host_list->data[i];
142 kfree_skb(sk_host_list);
144 if (state == ST21NFCA_SE_MODE_ON && host_id == se_idx)
145 return se_idx;
146 else if (state == ST21NFCA_SE_MODE_OFF && host_id != se_idx)
147 return se_idx;
149 return -1;
152 int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev)
154 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
155 int se_count = 0;
157 if (test_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks))
158 return 0;
160 if (info->se_status->is_uicc_present) {
161 nfc_add_se(hdev->ndev, NFC_HCI_UICC_HOST_ID, NFC_SE_UICC);
162 se_count++;
165 if (info->se_status->is_ese_present) {
166 nfc_add_se(hdev->ndev, ST21NFCA_ESE_HOST_ID, NFC_SE_EMBEDDED);
167 se_count++;
170 return !se_count;
172 EXPORT_SYMBOL(st21nfca_hci_discover_se);
174 int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx)
176 int r;
179 * According to upper layer, se_idx == NFC_SE_UICC when
180 * info->se_status->is_uicc_enable is true should never happen.
181 * Same for eSE.
183 r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_ON);
184 if (r == ST21NFCA_ESE_HOST_ID) {
185 st21nfca_se_get_atr(hdev);
186 r = nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE,
187 ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0);
188 if (r < 0)
189 return r;
190 } else if (r < 0) {
192 * The activation tentative failed, the secure element
193 * is not connected. Remove from the list.
195 nfc_remove_se(hdev->ndev, se_idx);
196 return r;
199 return 0;
201 EXPORT_SYMBOL(st21nfca_hci_enable_se);
203 int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx)
205 int r;
208 * According to upper layer, se_idx == NFC_SE_UICC when
209 * info->se_status->is_uicc_enable is true should never happen
210 * Same for eSE.
212 r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_OFF);
213 if (r < 0)
214 return r;
216 return 0;
218 EXPORT_SYMBOL(st21nfca_hci_disable_se);
220 int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx,
221 u8 *apdu, size_t apdu_length,
222 se_io_cb_t cb, void *cb_context)
224 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
226 pr_debug("se_io %x\n", se_idx);
228 switch (se_idx) {
229 case ST21NFCA_ESE_HOST_ID:
230 info->se_info.cb = cb;
231 info->se_info.cb_context = cb_context;
232 mod_timer(&info->se_info.bwi_timer, jiffies +
233 msecs_to_jiffies(info->se_info.wt_timeout));
234 info->se_info.bwi_active = true;
235 return nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE,
236 ST21NFCA_EVT_TRANSMIT_DATA,
237 apdu, apdu_length);
238 default:
239 return -ENODEV;
242 EXPORT_SYMBOL(st21nfca_hci_se_io);
244 static void st21nfca_se_wt_timeout(struct timer_list *t)
247 * No answer from the secure element
248 * within the defined timeout.
249 * Let's send a reset request as recovery procedure.
250 * According to the situation, we first try to send a software reset
251 * to the secure element. If the next command is still not
252 * answering in time, we send to the CLF a secure element hardware
253 * reset request.
255 /* hardware reset managed through VCC_UICC_OUT power supply */
256 u8 param = 0x01;
257 struct st21nfca_hci_info *info = from_timer(info, t,
258 se_info.bwi_timer);
260 pr_debug("\n");
262 info->se_info.bwi_active = false;
264 if (!info->se_info.xch_error) {
265 info->se_info.xch_error = true;
266 nfc_hci_send_event(info->hdev, ST21NFCA_APDU_READER_GATE,
267 ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0);
268 } else {
269 info->se_info.xch_error = false;
270 nfc_hci_send_event(info->hdev, ST21NFCA_DEVICE_MGNT_GATE,
271 ST21NFCA_EVT_SE_HARD_RESET, &param, 1);
273 info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
276 static void st21nfca_se_activation_timeout(struct timer_list *t)
278 struct st21nfca_hci_info *info = from_timer(info, t,
279 se_info.se_active_timer);
281 pr_debug("\n");
283 info->se_info.se_active = false;
285 complete(&info->se_info.req_completion);
289 * Returns:
290 * <= 0: driver handled the event, skb consumed
291 * 1: driver does not handle the event, please do standard processing
293 int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host,
294 u8 event, struct sk_buff *skb)
296 int r = 0;
297 struct device *dev = &hdev->ndev->dev;
298 struct nfc_evt_transaction *transaction;
300 pr_debug("connectivity gate event: %x\n", event);
302 switch (event) {
303 case ST21NFCA_EVT_CONNECTIVITY:
304 r = nfc_se_connectivity(hdev->ndev, host);
305 break;
306 case ST21NFCA_EVT_TRANSACTION:
308 * According to specification etsi 102 622
309 * 11.2.2.4 EVT_TRANSACTION Table 52
310 * Description Tag Length
311 * AID 81 5 to 16
312 * PARAMETERS 82 0 to 255
314 if (skb->len < NFC_MIN_AID_LENGTH + 2 &&
315 skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
316 return -EPROTO;
318 transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev,
319 skb->len - 2, GFP_KERNEL);
320 if (!transaction)
321 return -ENOMEM;
323 transaction->aid_len = skb->data[1];
324 memcpy(transaction->aid, &skb->data[2],
325 transaction->aid_len);
327 /* Check next byte is PARAMETERS tag (82) */
328 if (skb->data[transaction->aid_len + 2] !=
329 NFC_EVT_TRANSACTION_PARAMS_TAG)
330 return -EPROTO;
332 transaction->params_len = skb->data[transaction->aid_len + 3];
333 memcpy(transaction->params, skb->data +
334 transaction->aid_len + 4, transaction->params_len);
336 r = nfc_se_transaction(hdev->ndev, host, transaction);
337 break;
338 default:
339 nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n");
340 return 1;
342 kfree_skb(skb);
343 return r;
345 EXPORT_SYMBOL(st21nfca_connectivity_event_received);
347 int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev,
348 u8 event, struct sk_buff *skb)
350 int r = 0;
351 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
353 pr_debug("apdu reader gate event: %x\n", event);
355 switch (event) {
356 case ST21NFCA_EVT_TRANSMIT_DATA:
357 del_timer_sync(&info->se_info.bwi_timer);
358 info->se_info.bwi_active = false;
359 r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE,
360 ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0);
361 if (r < 0)
362 goto exit;
364 info->se_info.cb(info->se_info.cb_context,
365 skb->data, skb->len, 0);
366 break;
367 case ST21NFCA_EVT_WTX_REQUEST:
368 mod_timer(&info->se_info.bwi_timer, jiffies +
369 msecs_to_jiffies(info->se_info.wt_timeout));
370 break;
371 default:
372 nfc_err(&hdev->ndev->dev, "Unexpected event on apdu reader gate\n");
373 return 1;
376 exit:
377 kfree_skb(skb);
378 return r;
380 EXPORT_SYMBOL(st21nfca_apdu_reader_event_received);
382 void st21nfca_se_init(struct nfc_hci_dev *hdev)
384 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
386 init_completion(&info->se_info.req_completion);
387 /* initialize timers */
388 timer_setup(&info->se_info.bwi_timer, st21nfca_se_wt_timeout, 0);
389 info->se_info.bwi_active = false;
391 timer_setup(&info->se_info.se_active_timer,
392 st21nfca_se_activation_timeout, 0);
393 info->se_info.se_active = false;
395 info->se_info.count_pipes = 0;
396 info->se_info.expected_pipes = 0;
398 info->se_info.xch_error = false;
400 info->se_info.wt_timeout =
401 ST21NFCA_BWI_TO_TIMEOUT(ST21NFCA_ATR_DEFAULT_BWI);
403 EXPORT_SYMBOL(st21nfca_se_init);
405 void st21nfca_se_deinit(struct nfc_hci_dev *hdev)
407 struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
409 if (info->se_info.bwi_active)
410 del_timer_sync(&info->se_info.bwi_timer);
411 if (info->se_info.se_active)
412 del_timer_sync(&info->se_info.se_active_timer);
414 info->se_info.bwi_active = false;
415 info->se_info.se_active = false;
417 EXPORT_SYMBOL(st21nfca_se_deinit);