1 // SPDX-License-Identifier: GPL-2.0-only
3 * at91 pinctrl driver based on at91 pinmux core
5 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10 #include <linux/init.h>
12 #include <linux/of_device.h>
13 #include <linux/of_address.h>
14 #include <linux/of_irq.h>
15 #include <linux/slab.h>
16 #include <linux/interrupt.h>
18 #include <linux/gpio/driver.h>
19 #include <linux/pinctrl/machine.h>
20 #include <linux/pinctrl/pinconf.h>
21 #include <linux/pinctrl/pinctrl.h>
22 #include <linux/pinctrl/pinmux.h>
23 /* Since we request GPIOs from ourself */
24 #include <linux/pinctrl/consumer.h>
26 #include "pinctrl-at91.h"
29 #define MAX_GPIO_BANKS 5
30 #define MAX_NB_GPIO_PER_BANK 32
32 struct at91_pinctrl_mux_ops
;
34 struct at91_gpio_chip
{
35 struct gpio_chip chip
;
36 struct pinctrl_gpio_range range
;
37 struct at91_gpio_chip
*next
; /* Bank sharing same clock */
38 int pioc_hwirq
; /* PIO bank interrupt identifier on AIC */
39 int pioc_virq
; /* PIO bank Linux virtual interrupt */
40 int pioc_idx
; /* PIO bank index */
41 void __iomem
*regbase
; /* PIO bank virtual address */
42 struct clk
*clock
; /* associated clock */
43 struct at91_pinctrl_mux_ops
*ops
; /* ops */
46 static struct at91_gpio_chip
*gpio_chips
[MAX_GPIO_BANKS
];
48 static int gpio_banks
;
50 #define PULL_UP (1 << 0)
51 #define MULTI_DRIVE (1 << 1)
52 #define DEGLITCH (1 << 2)
53 #define PULL_DOWN (1 << 3)
54 #define DIS_SCHMIT (1 << 4)
55 #define DRIVE_STRENGTH_SHIFT 5
56 #define DRIVE_STRENGTH_MASK 0x3
57 #define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT)
58 #define OUTPUT (1 << 7)
59 #define OUTPUT_VAL_SHIFT 8
60 #define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
61 #define SLEWRATE_SHIFT 9
62 #define SLEWRATE_MASK 0x1
63 #define SLEWRATE (SLEWRATE_MASK << SLEWRATE_SHIFT)
64 #define DEBOUNCE (1 << 16)
65 #define DEBOUNCE_VAL_SHIFT 17
66 #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
69 * These defines will translated the dt binding settings to our internal
70 * settings. They are not necessarily the same value as the register setting.
71 * The actual drive strength current of low, medium and high must be looked up
72 * from the corresponding device datasheet. This value is different for pins
73 * that are even in the same banks. It is also dependent on VCC.
74 * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
75 * strength when there is no dt config for it.
77 enum drive_strength_bit
{
78 DRIVE_STRENGTH_BIT_DEF
,
79 DRIVE_STRENGTH_BIT_LOW
,
80 DRIVE_STRENGTH_BIT_MED
,
81 DRIVE_STRENGTH_BIT_HI
,
84 #define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \
92 #define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT)
95 * struct at91_pmx_func - describes AT91 pinmux functions
96 * @name: the name of this specific function
97 * @groups: corresponding pin groups
98 * @ngroups: the number of groups
100 struct at91_pmx_func
{
108 AT91_MUX_PERIPH_A
= 1,
109 AT91_MUX_PERIPH_B
= 2,
110 AT91_MUX_PERIPH_C
= 3,
111 AT91_MUX_PERIPH_D
= 4,
115 * struct at91_pmx_pin - describes an At91 pin mux
116 * @bank: the bank of the pin
117 * @pin: the pin number in the @bank
118 * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function.
119 * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
121 struct at91_pmx_pin
{
129 * struct at91_pin_group - describes an At91 pin group
130 * @name: the name of this specific pin group
131 * @pins_conf: the mux mode for each pin in this group. The size of this
132 * array is the same as pins.
133 * @pins: an array of discrete physical pins used in this group, taken
134 * from the driver-local pin enumeration space
135 * @npins: the number of pins in this group array, i.e. the number of
136 * elements in .pins so we can iterate over that array
138 struct at91_pin_group
{
140 struct at91_pmx_pin
*pins_conf
;
146 * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
147 * on new IP with support for periph C and D the way to mux in
148 * periph A and B has changed
149 * So provide the right call back
150 * if not present means the IP does not support it
151 * @get_periph: return the periph mode configured
152 * @mux_A_periph: mux as periph A
153 * @mux_B_periph: mux as periph B
154 * @mux_C_periph: mux as periph C
155 * @mux_D_periph: mux as periph D
156 * @get_deglitch: get deglitch status
157 * @set_deglitch: enable/disable deglitch
158 * @get_debounce: get debounce status
159 * @set_debounce: enable/disable debounce
160 * @get_pulldown: get pulldown status
161 * @set_pulldown: enable/disable pulldown
162 * @get_schmitt_trig: get schmitt trigger status
163 * @disable_schmitt_trig: disable schmitt trigger
164 * @irq_type: return irq type
166 struct at91_pinctrl_mux_ops
{
167 enum at91_mux (*get_periph
)(void __iomem
*pio
, unsigned mask
);
168 void (*mux_A_periph
)(void __iomem
*pio
, unsigned mask
);
169 void (*mux_B_periph
)(void __iomem
*pio
, unsigned mask
);
170 void (*mux_C_periph
)(void __iomem
*pio
, unsigned mask
);
171 void (*mux_D_periph
)(void __iomem
*pio
, unsigned mask
);
172 bool (*get_deglitch
)(void __iomem
*pio
, unsigned pin
);
173 void (*set_deglitch
)(void __iomem
*pio
, unsigned mask
, bool is_on
);
174 bool (*get_debounce
)(void __iomem
*pio
, unsigned pin
, u32
*div
);
175 void (*set_debounce
)(void __iomem
*pio
, unsigned mask
, bool is_on
, u32 div
);
176 bool (*get_pulldown
)(void __iomem
*pio
, unsigned pin
);
177 void (*set_pulldown
)(void __iomem
*pio
, unsigned mask
, bool is_on
);
178 bool (*get_schmitt_trig
)(void __iomem
*pio
, unsigned pin
);
179 void (*disable_schmitt_trig
)(void __iomem
*pio
, unsigned mask
);
180 unsigned (*get_drivestrength
)(void __iomem
*pio
, unsigned pin
);
181 void (*set_drivestrength
)(void __iomem
*pio
, unsigned pin
,
183 unsigned (*get_slewrate
)(void __iomem
*pio
, unsigned pin
);
184 void (*set_slewrate
)(void __iomem
*pio
, unsigned pin
, u32 slewrate
);
186 int (*irq_type
)(struct irq_data
*d
, unsigned type
);
189 static int gpio_irq_type(struct irq_data
*d
, unsigned type
);
190 static int alt_gpio_irq_type(struct irq_data
*d
, unsigned type
);
192 struct at91_pinctrl
{
194 struct pinctrl_dev
*pctl
;
201 struct at91_pmx_func
*functions
;
204 struct at91_pin_group
*groups
;
207 struct at91_pinctrl_mux_ops
*ops
;
210 static inline const struct at91_pin_group
*at91_pinctrl_find_group_by_name(
211 const struct at91_pinctrl
*info
,
214 const struct at91_pin_group
*grp
= NULL
;
217 for (i
= 0; i
< info
->ngroups
; i
++) {
218 if (strcmp(info
->groups
[i
].name
, name
))
221 grp
= &info
->groups
[i
];
222 dev_dbg(info
->dev
, "%s: %d 0:%d\n", name
, grp
->npins
, grp
->pins
[0]);
229 static int at91_get_groups_count(struct pinctrl_dev
*pctldev
)
231 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
233 return info
->ngroups
;
236 static const char *at91_get_group_name(struct pinctrl_dev
*pctldev
,
239 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
241 return info
->groups
[selector
].name
;
244 static int at91_get_group_pins(struct pinctrl_dev
*pctldev
, unsigned selector
,
245 const unsigned **pins
,
248 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
250 if (selector
>= info
->ngroups
)
253 *pins
= info
->groups
[selector
].pins
;
254 *npins
= info
->groups
[selector
].npins
;
259 static void at91_pin_dbg_show(struct pinctrl_dev
*pctldev
, struct seq_file
*s
,
262 seq_printf(s
, "%s", dev_name(pctldev
->dev
));
265 static int at91_dt_node_to_map(struct pinctrl_dev
*pctldev
,
266 struct device_node
*np
,
267 struct pinctrl_map
**map
, unsigned *num_maps
)
269 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
270 const struct at91_pin_group
*grp
;
271 struct pinctrl_map
*new_map
;
272 struct device_node
*parent
;
277 * first find the group of this node and check if we need to create
278 * config maps for pins
280 grp
= at91_pinctrl_find_group_by_name(info
, np
->name
);
282 dev_err(info
->dev
, "unable to find group for node %pOFn\n",
287 map_num
+= grp
->npins
;
288 new_map
= devm_kcalloc(pctldev
->dev
, map_num
, sizeof(*new_map
),
297 parent
= of_get_parent(np
);
299 devm_kfree(pctldev
->dev
, new_map
);
302 new_map
[0].type
= PIN_MAP_TYPE_MUX_GROUP
;
303 new_map
[0].data
.mux
.function
= parent
->name
;
304 new_map
[0].data
.mux
.group
= np
->name
;
307 /* create config map */
309 for (i
= 0; i
< grp
->npins
; i
++) {
310 new_map
[i
].type
= PIN_MAP_TYPE_CONFIGS_PIN
;
311 new_map
[i
].data
.configs
.group_or_pin
=
312 pin_get_name(pctldev
, grp
->pins
[i
]);
313 new_map
[i
].data
.configs
.configs
= &grp
->pins_conf
[i
].conf
;
314 new_map
[i
].data
.configs
.num_configs
= 1;
317 dev_dbg(pctldev
->dev
, "maps: function %s group %s num %d\n",
318 (*map
)->data
.mux
.function
, (*map
)->data
.mux
.group
, map_num
);
323 static void at91_dt_free_map(struct pinctrl_dev
*pctldev
,
324 struct pinctrl_map
*map
, unsigned num_maps
)
328 static const struct pinctrl_ops at91_pctrl_ops
= {
329 .get_groups_count
= at91_get_groups_count
,
330 .get_group_name
= at91_get_group_name
,
331 .get_group_pins
= at91_get_group_pins
,
332 .pin_dbg_show
= at91_pin_dbg_show
,
333 .dt_node_to_map
= at91_dt_node_to_map
,
334 .dt_free_map
= at91_dt_free_map
,
337 static void __iomem
*pin_to_controller(struct at91_pinctrl
*info
,
340 if (!gpio_chips
[bank
])
343 return gpio_chips
[bank
]->regbase
;
346 static inline int pin_to_bank(unsigned pin
)
348 return pin
/= MAX_NB_GPIO_PER_BANK
;
351 static unsigned pin_to_mask(unsigned int pin
)
356 static unsigned two_bit_pin_value_shift_amount(unsigned int pin
)
358 /* return the shift value for a pin for "two bit" per pin registers,
359 * i.e. drive strength */
360 return 2*((pin
>= MAX_NB_GPIO_PER_BANK
/2)
361 ? pin
- MAX_NB_GPIO_PER_BANK
/2 : pin
);
364 static unsigned sama5d3_get_drive_register(unsigned int pin
)
366 /* drive strength is split between two registers
367 * with two bits per pin */
368 return (pin
>= MAX_NB_GPIO_PER_BANK
/2)
369 ? SAMA5D3_PIO_DRIVER2
: SAMA5D3_PIO_DRIVER1
;
372 static unsigned at91sam9x5_get_drive_register(unsigned int pin
)
374 /* drive strength is split between two registers
375 * with two bits per pin */
376 return (pin
>= MAX_NB_GPIO_PER_BANK
/2)
377 ? AT91SAM9X5_PIO_DRIVER2
: AT91SAM9X5_PIO_DRIVER1
;
380 static void at91_mux_disable_interrupt(void __iomem
*pio
, unsigned mask
)
382 writel_relaxed(mask
, pio
+ PIO_IDR
);
385 static unsigned at91_mux_get_pullup(void __iomem
*pio
, unsigned pin
)
387 return !((readl_relaxed(pio
+ PIO_PUSR
) >> pin
) & 0x1);
390 static void at91_mux_set_pullup(void __iomem
*pio
, unsigned mask
, bool on
)
393 writel_relaxed(mask
, pio
+ PIO_PPDDR
);
395 writel_relaxed(mask
, pio
+ (on
? PIO_PUER
: PIO_PUDR
));
398 static bool at91_mux_get_output(void __iomem
*pio
, unsigned int pin
, bool *val
)
400 *val
= (readl_relaxed(pio
+ PIO_ODSR
) >> pin
) & 0x1;
401 return (readl_relaxed(pio
+ PIO_OSR
) >> pin
) & 0x1;
404 static void at91_mux_set_output(void __iomem
*pio
, unsigned int mask
,
405 bool is_on
, bool val
)
407 writel_relaxed(mask
, pio
+ (val
? PIO_SODR
: PIO_CODR
));
408 writel_relaxed(mask
, pio
+ (is_on
? PIO_OER
: PIO_ODR
));
411 static unsigned at91_mux_get_multidrive(void __iomem
*pio
, unsigned pin
)
413 return (readl_relaxed(pio
+ PIO_MDSR
) >> pin
) & 0x1;
416 static void at91_mux_set_multidrive(void __iomem
*pio
, unsigned mask
, bool on
)
418 writel_relaxed(mask
, pio
+ (on
? PIO_MDER
: PIO_MDDR
));
421 static void at91_mux_set_A_periph(void __iomem
*pio
, unsigned mask
)
423 writel_relaxed(mask
, pio
+ PIO_ASR
);
426 static void at91_mux_set_B_periph(void __iomem
*pio
, unsigned mask
)
428 writel_relaxed(mask
, pio
+ PIO_BSR
);
431 static void at91_mux_pio3_set_A_periph(void __iomem
*pio
, unsigned mask
)
434 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR1
) & ~mask
,
436 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR2
) & ~mask
,
440 static void at91_mux_pio3_set_B_periph(void __iomem
*pio
, unsigned mask
)
442 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR1
) | mask
,
444 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR2
) & ~mask
,
448 static void at91_mux_pio3_set_C_periph(void __iomem
*pio
, unsigned mask
)
450 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR1
) & ~mask
, pio
+ PIO_ABCDSR1
);
451 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR2
) | mask
, pio
+ PIO_ABCDSR2
);
454 static void at91_mux_pio3_set_D_periph(void __iomem
*pio
, unsigned mask
)
456 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR1
) | mask
, pio
+ PIO_ABCDSR1
);
457 writel_relaxed(readl_relaxed(pio
+ PIO_ABCDSR2
) | mask
, pio
+ PIO_ABCDSR2
);
460 static enum at91_mux
at91_mux_pio3_get_periph(void __iomem
*pio
, unsigned mask
)
464 if (readl_relaxed(pio
+ PIO_PSR
) & mask
)
465 return AT91_MUX_GPIO
;
467 select
= !!(readl_relaxed(pio
+ PIO_ABCDSR1
) & mask
);
468 select
|= (!!(readl_relaxed(pio
+ PIO_ABCDSR2
) & mask
) << 1);
473 static enum at91_mux
at91_mux_get_periph(void __iomem
*pio
, unsigned mask
)
477 if (readl_relaxed(pio
+ PIO_PSR
) & mask
)
478 return AT91_MUX_GPIO
;
480 select
= readl_relaxed(pio
+ PIO_ABSR
) & mask
;
485 static bool at91_mux_get_deglitch(void __iomem
*pio
, unsigned pin
)
487 return (readl_relaxed(pio
+ PIO_IFSR
) >> pin
) & 0x1;
490 static void at91_mux_set_deglitch(void __iomem
*pio
, unsigned mask
, bool is_on
)
492 writel_relaxed(mask
, pio
+ (is_on
? PIO_IFER
: PIO_IFDR
));
495 static bool at91_mux_pio3_get_deglitch(void __iomem
*pio
, unsigned pin
)
497 if ((readl_relaxed(pio
+ PIO_IFSR
) >> pin
) & 0x1)
498 return !((readl_relaxed(pio
+ PIO_IFSCSR
) >> pin
) & 0x1);
503 static void at91_mux_pio3_set_deglitch(void __iomem
*pio
, unsigned mask
, bool is_on
)
506 writel_relaxed(mask
, pio
+ PIO_IFSCDR
);
507 at91_mux_set_deglitch(pio
, mask
, is_on
);
510 static bool at91_mux_pio3_get_debounce(void __iomem
*pio
, unsigned pin
, u32
*div
)
512 *div
= readl_relaxed(pio
+ PIO_SCDR
);
514 return ((readl_relaxed(pio
+ PIO_IFSR
) >> pin
) & 0x1) &&
515 ((readl_relaxed(pio
+ PIO_IFSCSR
) >> pin
) & 0x1);
518 static void at91_mux_pio3_set_debounce(void __iomem
*pio
, unsigned mask
,
522 writel_relaxed(mask
, pio
+ PIO_IFSCER
);
523 writel_relaxed(div
& PIO_SCDR_DIV
, pio
+ PIO_SCDR
);
524 writel_relaxed(mask
, pio
+ PIO_IFER
);
526 writel_relaxed(mask
, pio
+ PIO_IFSCDR
);
529 static bool at91_mux_pio3_get_pulldown(void __iomem
*pio
, unsigned pin
)
531 return !((readl_relaxed(pio
+ PIO_PPDSR
) >> pin
) & 0x1);
534 static void at91_mux_pio3_set_pulldown(void __iomem
*pio
, unsigned mask
, bool is_on
)
537 writel_relaxed(mask
, pio
+ PIO_PUDR
);
539 writel_relaxed(mask
, pio
+ (is_on
? PIO_PPDER
: PIO_PPDDR
));
542 static void at91_mux_pio3_disable_schmitt_trig(void __iomem
*pio
, unsigned mask
)
544 writel_relaxed(readl_relaxed(pio
+ PIO_SCHMITT
) | mask
, pio
+ PIO_SCHMITT
);
547 static bool at91_mux_pio3_get_schmitt_trig(void __iomem
*pio
, unsigned pin
)
549 return (readl_relaxed(pio
+ PIO_SCHMITT
) >> pin
) & 0x1;
552 static inline u32
read_drive_strength(void __iomem
*reg
, unsigned pin
)
554 unsigned tmp
= readl_relaxed(reg
);
556 tmp
= tmp
>> two_bit_pin_value_shift_amount(pin
);
558 return tmp
& DRIVE_STRENGTH_MASK
;
561 static unsigned at91_mux_sama5d3_get_drivestrength(void __iomem
*pio
,
564 unsigned tmp
= read_drive_strength(pio
+
565 sama5d3_get_drive_register(pin
), pin
);
567 /* SAMA5 strength is 1:1 with our defines,
568 * except 0 is equivalent to low per datasheet */
570 tmp
= DRIVE_STRENGTH_BIT_MSK(LOW
);
575 static unsigned at91_mux_sam9x5_get_drivestrength(void __iomem
*pio
,
578 unsigned tmp
= read_drive_strength(pio
+
579 at91sam9x5_get_drive_register(pin
), pin
);
581 /* strength is inverse in SAM9x5s hardware with the pinctrl defines
582 * hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */
583 tmp
= DRIVE_STRENGTH_BIT_MSK(HI
) - tmp
;
588 static unsigned at91_mux_sam9x60_get_drivestrength(void __iomem
*pio
,
591 unsigned tmp
= readl_relaxed(pio
+ SAM9X60_PIO_DRIVER1
);
594 return DRIVE_STRENGTH_BIT_HI
;
596 return DRIVE_STRENGTH_BIT_LOW
;
599 static unsigned at91_mux_sam9x60_get_slewrate(void __iomem
*pio
, unsigned pin
)
601 unsigned tmp
= readl_relaxed(pio
+ SAM9X60_PIO_SLEWR
);
603 if ((tmp
& BIT(pin
)))
604 return SLEWRATE_BIT_ENA
;
606 return SLEWRATE_BIT_DIS
;
609 static void set_drive_strength(void __iomem
*reg
, unsigned pin
, u32 strength
)
611 unsigned tmp
= readl_relaxed(reg
);
612 unsigned shift
= two_bit_pin_value_shift_amount(pin
);
614 tmp
&= ~(DRIVE_STRENGTH_MASK
<< shift
);
615 tmp
|= strength
<< shift
;
617 writel_relaxed(tmp
, reg
);
620 static void at91_mux_sama5d3_set_drivestrength(void __iomem
*pio
, unsigned pin
,
623 /* do nothing if setting is zero */
627 /* strength is 1 to 1 with setting for SAMA5 */
628 set_drive_strength(pio
+ sama5d3_get_drive_register(pin
), pin
, setting
);
631 static void at91_mux_sam9x5_set_drivestrength(void __iomem
*pio
, unsigned pin
,
634 /* do nothing if setting is zero */
638 /* strength is inverse on SAM9x5s with our defines
639 * 0 = hi, 1 = med, 2 = low, 3 = rsvd */
640 setting
= DRIVE_STRENGTH_BIT_MSK(HI
) - setting
;
642 set_drive_strength(pio
+ at91sam9x5_get_drive_register(pin
), pin
,
646 static void at91_mux_sam9x60_set_drivestrength(void __iomem
*pio
, unsigned pin
,
651 if (setting
<= DRIVE_STRENGTH_BIT_DEF
||
652 setting
== DRIVE_STRENGTH_BIT_MED
||
653 setting
> DRIVE_STRENGTH_BIT_HI
)
656 tmp
= readl_relaxed(pio
+ SAM9X60_PIO_DRIVER1
);
658 /* Strength is 0: low, 1: hi */
659 if (setting
== DRIVE_STRENGTH_BIT_LOW
)
664 writel_relaxed(tmp
, pio
+ SAM9X60_PIO_DRIVER1
);
667 static void at91_mux_sam9x60_set_slewrate(void __iomem
*pio
, unsigned pin
,
672 if (setting
< SLEWRATE_BIT_ENA
|| setting
> SLEWRATE_BIT_DIS
)
675 tmp
= readl_relaxed(pio
+ SAM9X60_PIO_SLEWR
);
677 if (setting
== SLEWRATE_BIT_DIS
)
682 writel_relaxed(tmp
, pio
+ SAM9X60_PIO_SLEWR
);
685 static struct at91_pinctrl_mux_ops at91rm9200_ops
= {
686 .get_periph
= at91_mux_get_periph
,
687 .mux_A_periph
= at91_mux_set_A_periph
,
688 .mux_B_periph
= at91_mux_set_B_periph
,
689 .get_deglitch
= at91_mux_get_deglitch
,
690 .set_deglitch
= at91_mux_set_deglitch
,
691 .irq_type
= gpio_irq_type
,
694 static struct at91_pinctrl_mux_ops at91sam9x5_ops
= {
695 .get_periph
= at91_mux_pio3_get_periph
,
696 .mux_A_periph
= at91_mux_pio3_set_A_periph
,
697 .mux_B_periph
= at91_mux_pio3_set_B_periph
,
698 .mux_C_periph
= at91_mux_pio3_set_C_periph
,
699 .mux_D_periph
= at91_mux_pio3_set_D_periph
,
700 .get_deglitch
= at91_mux_pio3_get_deglitch
,
701 .set_deglitch
= at91_mux_pio3_set_deglitch
,
702 .get_debounce
= at91_mux_pio3_get_debounce
,
703 .set_debounce
= at91_mux_pio3_set_debounce
,
704 .get_pulldown
= at91_mux_pio3_get_pulldown
,
705 .set_pulldown
= at91_mux_pio3_set_pulldown
,
706 .get_schmitt_trig
= at91_mux_pio3_get_schmitt_trig
,
707 .disable_schmitt_trig
= at91_mux_pio3_disable_schmitt_trig
,
708 .get_drivestrength
= at91_mux_sam9x5_get_drivestrength
,
709 .set_drivestrength
= at91_mux_sam9x5_set_drivestrength
,
710 .irq_type
= alt_gpio_irq_type
,
713 static const struct at91_pinctrl_mux_ops sam9x60_ops
= {
714 .get_periph
= at91_mux_pio3_get_periph
,
715 .mux_A_periph
= at91_mux_pio3_set_A_periph
,
716 .mux_B_periph
= at91_mux_pio3_set_B_periph
,
717 .mux_C_periph
= at91_mux_pio3_set_C_periph
,
718 .mux_D_periph
= at91_mux_pio3_set_D_periph
,
719 .get_deglitch
= at91_mux_pio3_get_deglitch
,
720 .set_deglitch
= at91_mux_pio3_set_deglitch
,
721 .get_debounce
= at91_mux_pio3_get_debounce
,
722 .set_debounce
= at91_mux_pio3_set_debounce
,
723 .get_pulldown
= at91_mux_pio3_get_pulldown
,
724 .set_pulldown
= at91_mux_pio3_set_pulldown
,
725 .get_schmitt_trig
= at91_mux_pio3_get_schmitt_trig
,
726 .disable_schmitt_trig
= at91_mux_pio3_disable_schmitt_trig
,
727 .get_drivestrength
= at91_mux_sam9x60_get_drivestrength
,
728 .set_drivestrength
= at91_mux_sam9x60_set_drivestrength
,
729 .get_slewrate
= at91_mux_sam9x60_get_slewrate
,
730 .set_slewrate
= at91_mux_sam9x60_set_slewrate
,
731 .irq_type
= alt_gpio_irq_type
,
735 static struct at91_pinctrl_mux_ops sama5d3_ops
= {
736 .get_periph
= at91_mux_pio3_get_periph
,
737 .mux_A_periph
= at91_mux_pio3_set_A_periph
,
738 .mux_B_periph
= at91_mux_pio3_set_B_periph
,
739 .mux_C_periph
= at91_mux_pio3_set_C_periph
,
740 .mux_D_periph
= at91_mux_pio3_set_D_periph
,
741 .get_deglitch
= at91_mux_pio3_get_deglitch
,
742 .set_deglitch
= at91_mux_pio3_set_deglitch
,
743 .get_debounce
= at91_mux_pio3_get_debounce
,
744 .set_debounce
= at91_mux_pio3_set_debounce
,
745 .get_pulldown
= at91_mux_pio3_get_pulldown
,
746 .set_pulldown
= at91_mux_pio3_set_pulldown
,
747 .get_schmitt_trig
= at91_mux_pio3_get_schmitt_trig
,
748 .disable_schmitt_trig
= at91_mux_pio3_disable_schmitt_trig
,
749 .get_drivestrength
= at91_mux_sama5d3_get_drivestrength
,
750 .set_drivestrength
= at91_mux_sama5d3_set_drivestrength
,
751 .irq_type
= alt_gpio_irq_type
,
754 static void at91_pin_dbg(const struct device
*dev
, const struct at91_pmx_pin
*pin
)
757 dev_dbg(dev
, "pio%c%d configured as periph%c with conf = 0x%lx\n",
758 pin
->bank
+ 'A', pin
->pin
, pin
->mux
- 1 + 'A', pin
->conf
);
760 dev_dbg(dev
, "pio%c%d configured as gpio with conf = 0x%lx\n",
761 pin
->bank
+ 'A', pin
->pin
, pin
->conf
);
765 static int pin_check_config(struct at91_pinctrl
*info
, const char *name
,
766 int index
, const struct at91_pmx_pin
*pin
)
770 /* check if it's a valid config */
771 if (pin
->bank
>= gpio_banks
) {
772 dev_err(info
->dev
, "%s: pin conf %d bank_id %d >= nbanks %d\n",
773 name
, index
, pin
->bank
, gpio_banks
);
777 if (!gpio_chips
[pin
->bank
]) {
778 dev_err(info
->dev
, "%s: pin conf %d bank_id %d not enabled\n",
779 name
, index
, pin
->bank
);
783 if (pin
->pin
>= MAX_NB_GPIO_PER_BANK
) {
784 dev_err(info
->dev
, "%s: pin conf %d pin_bank_id %d >= %d\n",
785 name
, index
, pin
->pin
, MAX_NB_GPIO_PER_BANK
);
794 if (mux
>= info
->nmux
) {
795 dev_err(info
->dev
, "%s: pin conf %d mux_id %d >= nmux %d\n",
796 name
, index
, mux
, info
->nmux
);
800 if (!(info
->mux_mask
[pin
->bank
* info
->nmux
+ mux
] & 1 << pin
->pin
)) {
801 dev_err(info
->dev
, "%s: pin conf %d mux_id %d not supported for pio%c%d\n",
802 name
, index
, mux
, pin
->bank
+ 'A', pin
->pin
);
809 static void at91_mux_gpio_disable(void __iomem
*pio
, unsigned mask
)
811 writel_relaxed(mask
, pio
+ PIO_PDR
);
814 static void at91_mux_gpio_enable(void __iomem
*pio
, unsigned mask
, bool input
)
816 writel_relaxed(mask
, pio
+ PIO_PER
);
817 writel_relaxed(mask
, pio
+ (input
? PIO_ODR
: PIO_OER
));
820 static int at91_pmx_set(struct pinctrl_dev
*pctldev
, unsigned selector
,
823 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
824 const struct at91_pmx_pin
*pins_conf
= info
->groups
[group
].pins_conf
;
825 const struct at91_pmx_pin
*pin
;
826 uint32_t npins
= info
->groups
[group
].npins
;
831 dev_dbg(info
->dev
, "enable function %s group %s\n",
832 info
->functions
[selector
].name
, info
->groups
[group
].name
);
834 /* first check that all the pins of the group are valid with a valid
836 for (i
= 0; i
< npins
; i
++) {
838 ret
= pin_check_config(info
, info
->groups
[group
].name
, i
, pin
);
843 for (i
= 0; i
< npins
; i
++) {
845 at91_pin_dbg(info
->dev
, pin
);
846 pio
= pin_to_controller(info
, pin
->bank
);
851 mask
= pin_to_mask(pin
->pin
);
852 at91_mux_disable_interrupt(pio
, mask
);
855 at91_mux_gpio_enable(pio
, mask
, 1);
857 case AT91_MUX_PERIPH_A
:
858 info
->ops
->mux_A_periph(pio
, mask
);
860 case AT91_MUX_PERIPH_B
:
861 info
->ops
->mux_B_periph(pio
, mask
);
863 case AT91_MUX_PERIPH_C
:
864 if (!info
->ops
->mux_C_periph
)
866 info
->ops
->mux_C_periph(pio
, mask
);
868 case AT91_MUX_PERIPH_D
:
869 if (!info
->ops
->mux_D_periph
)
871 info
->ops
->mux_D_periph(pio
, mask
);
875 at91_mux_gpio_disable(pio
, mask
);
881 static int at91_pmx_get_funcs_count(struct pinctrl_dev
*pctldev
)
883 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
885 return info
->nfunctions
;
888 static const char *at91_pmx_get_func_name(struct pinctrl_dev
*pctldev
,
891 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
893 return info
->functions
[selector
].name
;
896 static int at91_pmx_get_groups(struct pinctrl_dev
*pctldev
, unsigned selector
,
897 const char * const **groups
,
898 unsigned * const num_groups
)
900 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
902 *groups
= info
->functions
[selector
].groups
;
903 *num_groups
= info
->functions
[selector
].ngroups
;
908 static int at91_gpio_request_enable(struct pinctrl_dev
*pctldev
,
909 struct pinctrl_gpio_range
*range
,
912 struct at91_pinctrl
*npct
= pinctrl_dev_get_drvdata(pctldev
);
913 struct at91_gpio_chip
*at91_chip
;
914 struct gpio_chip
*chip
;
918 dev_err(npct
->dev
, "invalid range\n");
922 dev_err(npct
->dev
, "missing GPIO chip in range\n");
926 at91_chip
= gpiochip_get_data(chip
);
928 dev_dbg(npct
->dev
, "enable pin %u as GPIO\n", offset
);
930 mask
= 1 << (offset
- chip
->base
);
932 dev_dbg(npct
->dev
, "enable pin %u as PIO%c%d 0x%x\n",
933 offset
, 'A' + range
->id
, offset
- chip
->base
, mask
);
935 writel_relaxed(mask
, at91_chip
->regbase
+ PIO_PER
);
940 static void at91_gpio_disable_free(struct pinctrl_dev
*pctldev
,
941 struct pinctrl_gpio_range
*range
,
944 struct at91_pinctrl
*npct
= pinctrl_dev_get_drvdata(pctldev
);
946 dev_dbg(npct
->dev
, "disable pin %u as GPIO\n", offset
);
947 /* Set the pin to some default state, GPIO is usually default */
950 static const struct pinmux_ops at91_pmx_ops
= {
951 .get_functions_count
= at91_pmx_get_funcs_count
,
952 .get_function_name
= at91_pmx_get_func_name
,
953 .get_function_groups
= at91_pmx_get_groups
,
954 .set_mux
= at91_pmx_set
,
955 .gpio_request_enable
= at91_gpio_request_enable
,
956 .gpio_disable_free
= at91_gpio_disable_free
,
959 static int at91_pinconf_get(struct pinctrl_dev
*pctldev
,
960 unsigned pin_id
, unsigned long *config
)
962 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
969 dev_dbg(info
->dev
, "%s:%d, pin_id=%d", __func__
, __LINE__
, pin_id
);
970 pio
= pin_to_controller(info
, pin_to_bank(pin_id
));
975 pin
= pin_id
% MAX_NB_GPIO_PER_BANK
;
977 if (at91_mux_get_multidrive(pio
, pin
))
978 *config
|= MULTI_DRIVE
;
980 if (at91_mux_get_pullup(pio
, pin
))
983 if (info
->ops
->get_deglitch
&& info
->ops
->get_deglitch(pio
, pin
))
985 if (info
->ops
->get_debounce
&& info
->ops
->get_debounce(pio
, pin
, &div
))
986 *config
|= DEBOUNCE
| (div
<< DEBOUNCE_VAL_SHIFT
);
987 if (info
->ops
->get_pulldown
&& info
->ops
->get_pulldown(pio
, pin
))
988 *config
|= PULL_DOWN
;
989 if (info
->ops
->get_schmitt_trig
&& info
->ops
->get_schmitt_trig(pio
, pin
))
990 *config
|= DIS_SCHMIT
;
991 if (info
->ops
->get_drivestrength
)
992 *config
|= (info
->ops
->get_drivestrength(pio
, pin
)
993 << DRIVE_STRENGTH_SHIFT
);
994 if (info
->ops
->get_slewrate
)
995 *config
|= (info
->ops
->get_slewrate(pio
, pin
) << SLEWRATE_SHIFT
);
996 if (at91_mux_get_output(pio
, pin
, &out
))
997 *config
|= OUTPUT
| (out
<< OUTPUT_VAL_SHIFT
);
1002 static int at91_pinconf_set(struct pinctrl_dev
*pctldev
,
1003 unsigned pin_id
, unsigned long *configs
,
1004 unsigned num_configs
)
1006 struct at91_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
1010 unsigned long config
;
1013 for (i
= 0; i
< num_configs
; i
++) {
1014 config
= configs
[i
];
1017 "%s:%d, pin_id=%d, config=0x%lx",
1018 __func__
, __LINE__
, pin_id
, config
);
1019 pio
= pin_to_controller(info
, pin_to_bank(pin_id
));
1024 pin
= pin_id
% MAX_NB_GPIO_PER_BANK
;
1025 mask
= pin_to_mask(pin
);
1027 if (config
& PULL_UP
&& config
& PULL_DOWN
)
1030 at91_mux_set_output(pio
, mask
, config
& OUTPUT
,
1031 (config
& OUTPUT_VAL
) >> OUTPUT_VAL_SHIFT
);
1032 at91_mux_set_pullup(pio
, mask
, config
& PULL_UP
);
1033 at91_mux_set_multidrive(pio
, mask
, config
& MULTI_DRIVE
);
1034 if (info
->ops
->set_deglitch
)
1035 info
->ops
->set_deglitch(pio
, mask
, config
& DEGLITCH
);
1036 if (info
->ops
->set_debounce
)
1037 info
->ops
->set_debounce(pio
, mask
, config
& DEBOUNCE
,
1038 (config
& DEBOUNCE_VAL
) >> DEBOUNCE_VAL_SHIFT
);
1039 if (info
->ops
->set_pulldown
)
1040 info
->ops
->set_pulldown(pio
, mask
, config
& PULL_DOWN
);
1041 if (info
->ops
->disable_schmitt_trig
&& config
& DIS_SCHMIT
)
1042 info
->ops
->disable_schmitt_trig(pio
, mask
);
1043 if (info
->ops
->set_drivestrength
)
1044 info
->ops
->set_drivestrength(pio
, pin
,
1045 (config
& DRIVE_STRENGTH
)
1046 >> DRIVE_STRENGTH_SHIFT
);
1047 if (info
->ops
->set_slewrate
)
1048 info
->ops
->set_slewrate(pio
, pin
,
1049 (config
& SLEWRATE
) >> SLEWRATE_SHIFT
);
1051 } /* for each config */
1056 #define DBG_SHOW_FLAG(flag) do { \
1057 if (config & flag) { \
1060 seq_puts(s, #flag); \
1065 #define DBG_SHOW_FLAG_MASKED(mask, flag, name) do { \
1066 if ((config & mask) == flag) { \
1069 seq_puts(s, #name); \
1074 static void at91_pinconf_dbg_show(struct pinctrl_dev
*pctldev
,
1075 struct seq_file
*s
, unsigned pin_id
)
1077 unsigned long config
;
1078 int val
, num_conf
= 0;
1080 at91_pinconf_get(pctldev
, pin_id
, &config
);
1082 DBG_SHOW_FLAG(MULTI_DRIVE
);
1083 DBG_SHOW_FLAG(PULL_UP
);
1084 DBG_SHOW_FLAG(PULL_DOWN
);
1085 DBG_SHOW_FLAG(DIS_SCHMIT
);
1086 DBG_SHOW_FLAG(DEGLITCH
);
1087 DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH
, DRIVE_STRENGTH_BIT_MSK(LOW
),
1088 DRIVE_STRENGTH_LOW
);
1089 DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH
, DRIVE_STRENGTH_BIT_MSK(MED
),
1090 DRIVE_STRENGTH_MED
);
1091 DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH
, DRIVE_STRENGTH_BIT_MSK(HI
),
1093 DBG_SHOW_FLAG(SLEWRATE
);
1094 DBG_SHOW_FLAG(DEBOUNCE
);
1095 if (config
& DEBOUNCE
) {
1096 val
= config
>> DEBOUNCE_VAL_SHIFT
;
1097 seq_printf(s
, "(%d)", val
);
1103 static void at91_pinconf_group_dbg_show(struct pinctrl_dev
*pctldev
,
1104 struct seq_file
*s
, unsigned group
)
1108 static const struct pinconf_ops at91_pinconf_ops
= {
1109 .pin_config_get
= at91_pinconf_get
,
1110 .pin_config_set
= at91_pinconf_set
,
1111 .pin_config_dbg_show
= at91_pinconf_dbg_show
,
1112 .pin_config_group_dbg_show
= at91_pinconf_group_dbg_show
,
1115 static struct pinctrl_desc at91_pinctrl_desc
= {
1116 .pctlops
= &at91_pctrl_ops
,
1117 .pmxops
= &at91_pmx_ops
,
1118 .confops
= &at91_pinconf_ops
,
1119 .owner
= THIS_MODULE
,
1122 static const char *gpio_compat
= "atmel,at91rm9200-gpio";
1124 static void at91_pinctrl_child_count(struct at91_pinctrl
*info
,
1125 struct device_node
*np
)
1127 struct device_node
*child
;
1129 for_each_child_of_node(np
, child
) {
1130 if (of_device_is_compatible(child
, gpio_compat
)) {
1131 if (of_device_is_available(child
))
1132 info
->nactive_banks
++;
1135 info
->ngroups
+= of_get_child_count(child
);
1140 static int at91_pinctrl_mux_mask(struct at91_pinctrl
*info
,
1141 struct device_node
*np
)
1147 list
= of_get_property(np
, "atmel,mux-mask", &size
);
1149 dev_err(info
->dev
, "can not read the mux-mask of %d\n", size
);
1153 size
/= sizeof(*list
);
1154 if (!size
|| size
% gpio_banks
) {
1155 dev_err(info
->dev
, "wrong mux mask array should be by %d\n", gpio_banks
);
1158 info
->nmux
= size
/ gpio_banks
;
1160 info
->mux_mask
= devm_kcalloc(info
->dev
, size
, sizeof(u32
),
1162 if (!info
->mux_mask
)
1165 ret
= of_property_read_u32_array(np
, "atmel,mux-mask",
1166 info
->mux_mask
, size
);
1168 dev_err(info
->dev
, "can not read the mux-mask of %d\n", size
);
1172 static int at91_pinctrl_parse_groups(struct device_node
*np
,
1173 struct at91_pin_group
*grp
,
1174 struct at91_pinctrl
*info
, u32 index
)
1176 struct at91_pmx_pin
*pin
;
1181 dev_dbg(info
->dev
, "group(%d): %pOFn\n", index
, np
);
1183 /* Initialise group */
1184 grp
->name
= np
->name
;
1187 * the binding format is atmel,pins = <bank pin mux CONFIG ...>,
1188 * do sanity check and calculate pins number
1190 list
= of_get_property(np
, "atmel,pins", &size
);
1191 /* we do not check return since it's safe node passed down */
1192 size
/= sizeof(*list
);
1193 if (!size
|| size
% 4) {
1194 dev_err(info
->dev
, "wrong pins number or pins and configs should be by 4\n");
1198 grp
->npins
= size
/ 4;
1199 pin
= grp
->pins_conf
= devm_kcalloc(info
->dev
,
1201 sizeof(struct at91_pmx_pin
),
1203 grp
->pins
= devm_kcalloc(info
->dev
, grp
->npins
, sizeof(unsigned int),
1205 if (!grp
->pins_conf
|| !grp
->pins
)
1208 for (i
= 0, j
= 0; i
< size
; i
+= 4, j
++) {
1209 pin
->bank
= be32_to_cpu(*list
++);
1210 pin
->pin
= be32_to_cpu(*list
++);
1211 grp
->pins
[j
] = pin
->bank
* MAX_NB_GPIO_PER_BANK
+ pin
->pin
;
1212 pin
->mux
= be32_to_cpu(*list
++);
1213 pin
->conf
= be32_to_cpu(*list
++);
1215 at91_pin_dbg(info
->dev
, pin
);
1222 static int at91_pinctrl_parse_functions(struct device_node
*np
,
1223 struct at91_pinctrl
*info
, u32 index
)
1225 struct device_node
*child
;
1226 struct at91_pmx_func
*func
;
1227 struct at91_pin_group
*grp
;
1229 static u32 grp_index
;
1232 dev_dbg(info
->dev
, "parse function(%d): %pOFn\n", index
, np
);
1234 func
= &info
->functions
[index
];
1236 /* Initialise function */
1237 func
->name
= np
->name
;
1238 func
->ngroups
= of_get_child_count(np
);
1239 if (func
->ngroups
== 0) {
1240 dev_err(info
->dev
, "no groups defined\n");
1243 func
->groups
= devm_kcalloc(info
->dev
,
1244 func
->ngroups
, sizeof(char *), GFP_KERNEL
);
1248 for_each_child_of_node(np
, child
) {
1249 func
->groups
[i
] = child
->name
;
1250 grp
= &info
->groups
[grp_index
++];
1251 ret
= at91_pinctrl_parse_groups(child
, grp
, info
, i
++);
1261 static const struct of_device_id at91_pinctrl_of_match
[] = {
1262 { .compatible
= "atmel,sama5d3-pinctrl", .data
= &sama5d3_ops
},
1263 { .compatible
= "atmel,at91sam9x5-pinctrl", .data
= &at91sam9x5_ops
},
1264 { .compatible
= "atmel,at91rm9200-pinctrl", .data
= &at91rm9200_ops
},
1265 { .compatible
= "microchip,sam9x60-pinctrl", .data
= &sam9x60_ops
},
1269 static int at91_pinctrl_probe_dt(struct platform_device
*pdev
,
1270 struct at91_pinctrl
*info
)
1275 struct device_node
*np
= pdev
->dev
.of_node
;
1276 struct device_node
*child
;
1281 info
->dev
= &pdev
->dev
;
1282 info
->ops
= (struct at91_pinctrl_mux_ops
*)
1283 of_match_device(at91_pinctrl_of_match
, &pdev
->dev
)->data
;
1284 at91_pinctrl_child_count(info
, np
);
1286 if (gpio_banks
< 1) {
1287 dev_err(&pdev
->dev
, "you need to specify at least one gpio-controller\n");
1291 ret
= at91_pinctrl_mux_mask(info
, np
);
1295 dev_dbg(&pdev
->dev
, "nmux = %d\n", info
->nmux
);
1297 dev_dbg(&pdev
->dev
, "mux-mask\n");
1298 tmp
= info
->mux_mask
;
1299 for (i
= 0; i
< gpio_banks
; i
++) {
1300 for (j
= 0; j
< info
->nmux
; j
++, tmp
++) {
1301 dev_dbg(&pdev
->dev
, "%d:%d\t0x%x\n", i
, j
, tmp
[0]);
1305 dev_dbg(&pdev
->dev
, "nfunctions = %d\n", info
->nfunctions
);
1306 dev_dbg(&pdev
->dev
, "ngroups = %d\n", info
->ngroups
);
1307 info
->functions
= devm_kcalloc(&pdev
->dev
,
1309 sizeof(struct at91_pmx_func
),
1311 if (!info
->functions
)
1314 info
->groups
= devm_kcalloc(&pdev
->dev
,
1316 sizeof(struct at91_pin_group
),
1321 dev_dbg(&pdev
->dev
, "nbanks = %d\n", gpio_banks
);
1322 dev_dbg(&pdev
->dev
, "nfunctions = %d\n", info
->nfunctions
);
1323 dev_dbg(&pdev
->dev
, "ngroups = %d\n", info
->ngroups
);
1327 for_each_child_of_node(np
, child
) {
1328 if (of_device_is_compatible(child
, gpio_compat
))
1330 ret
= at91_pinctrl_parse_functions(child
, info
, i
++);
1332 dev_err(&pdev
->dev
, "failed to parse function\n");
1341 static int at91_pinctrl_probe(struct platform_device
*pdev
)
1343 struct at91_pinctrl
*info
;
1344 struct pinctrl_pin_desc
*pdesc
;
1345 int ret
, i
, j
, k
, ngpio_chips_enabled
= 0;
1347 info
= devm_kzalloc(&pdev
->dev
, sizeof(*info
), GFP_KERNEL
);
1351 ret
= at91_pinctrl_probe_dt(pdev
, info
);
1356 * We need all the GPIO drivers to probe FIRST, or we will not be able
1357 * to obtain references to the struct gpio_chip * for them, and we
1358 * need this to proceed.
1360 for (i
= 0; i
< gpio_banks
; i
++)
1362 ngpio_chips_enabled
++;
1364 if (ngpio_chips_enabled
< info
->nactive_banks
) {
1365 dev_warn(&pdev
->dev
,
1366 "All GPIO chips are not registered yet (%d/%d)\n",
1367 ngpio_chips_enabled
, info
->nactive_banks
);
1368 devm_kfree(&pdev
->dev
, info
);
1369 return -EPROBE_DEFER
;
1372 at91_pinctrl_desc
.name
= dev_name(&pdev
->dev
);
1373 at91_pinctrl_desc
.npins
= gpio_banks
* MAX_NB_GPIO_PER_BANK
;
1374 at91_pinctrl_desc
.pins
= pdesc
=
1375 devm_kcalloc(&pdev
->dev
,
1376 at91_pinctrl_desc
.npins
, sizeof(*pdesc
),
1379 if (!at91_pinctrl_desc
.pins
)
1382 for (i
= 0, k
= 0; i
< gpio_banks
; i
++) {
1383 for (j
= 0; j
< MAX_NB_GPIO_PER_BANK
; j
++, k
++) {
1385 pdesc
->name
= kasprintf(GFP_KERNEL
, "pio%c%d", i
+ 'A', j
);
1390 platform_set_drvdata(pdev
, info
);
1391 info
->pctl
= devm_pinctrl_register(&pdev
->dev
, &at91_pinctrl_desc
,
1394 if (IS_ERR(info
->pctl
)) {
1395 dev_err(&pdev
->dev
, "could not register AT91 pinctrl driver\n");
1396 return PTR_ERR(info
->pctl
);
1399 /* We will handle a range of GPIO pins */
1400 for (i
= 0; i
< gpio_banks
; i
++)
1402 pinctrl_add_gpio_range(info
->pctl
, &gpio_chips
[i
]->range
);
1404 dev_info(&pdev
->dev
, "initialized AT91 pinctrl driver\n");
1409 static int at91_gpio_get_direction(struct gpio_chip
*chip
, unsigned offset
)
1411 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1412 void __iomem
*pio
= at91_gpio
->regbase
;
1413 unsigned mask
= 1 << offset
;
1416 osr
= readl_relaxed(pio
+ PIO_OSR
);
1418 return GPIO_LINE_DIRECTION_OUT
;
1420 return GPIO_LINE_DIRECTION_IN
;
1423 static int at91_gpio_direction_input(struct gpio_chip
*chip
, unsigned offset
)
1425 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1426 void __iomem
*pio
= at91_gpio
->regbase
;
1427 unsigned mask
= 1 << offset
;
1429 writel_relaxed(mask
, pio
+ PIO_ODR
);
1433 static int at91_gpio_get(struct gpio_chip
*chip
, unsigned offset
)
1435 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1436 void __iomem
*pio
= at91_gpio
->regbase
;
1437 unsigned mask
= 1 << offset
;
1440 pdsr
= readl_relaxed(pio
+ PIO_PDSR
);
1441 return (pdsr
& mask
) != 0;
1444 static void at91_gpio_set(struct gpio_chip
*chip
, unsigned offset
,
1447 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1448 void __iomem
*pio
= at91_gpio
->regbase
;
1449 unsigned mask
= 1 << offset
;
1451 writel_relaxed(mask
, pio
+ (val
? PIO_SODR
: PIO_CODR
));
1454 static void at91_gpio_set_multiple(struct gpio_chip
*chip
,
1455 unsigned long *mask
, unsigned long *bits
)
1457 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1458 void __iomem
*pio
= at91_gpio
->regbase
;
1460 #define BITS_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1))
1461 /* Mask additionally to ngpio as not all GPIO controllers have 32 pins */
1462 uint32_t set_mask
= (*mask
& *bits
) & BITS_MASK(chip
->ngpio
);
1463 uint32_t clear_mask
= (*mask
& ~(*bits
)) & BITS_MASK(chip
->ngpio
);
1465 writel_relaxed(set_mask
, pio
+ PIO_SODR
);
1466 writel_relaxed(clear_mask
, pio
+ PIO_CODR
);
1469 static int at91_gpio_direction_output(struct gpio_chip
*chip
, unsigned offset
,
1472 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1473 void __iomem
*pio
= at91_gpio
->regbase
;
1474 unsigned mask
= 1 << offset
;
1476 writel_relaxed(mask
, pio
+ (val
? PIO_SODR
: PIO_CODR
));
1477 writel_relaxed(mask
, pio
+ PIO_OER
);
1482 #ifdef CONFIG_DEBUG_FS
1483 static void at91_gpio_dbg_show(struct seq_file
*s
, struct gpio_chip
*chip
)
1487 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(chip
);
1488 void __iomem
*pio
= at91_gpio
->regbase
;
1490 for (i
= 0; i
< chip
->ngpio
; i
++) {
1491 unsigned mask
= pin_to_mask(i
);
1492 const char *gpio_label
;
1494 gpio_label
= gpiochip_is_requested(chip
, i
);
1497 mode
= at91_gpio
->ops
->get_periph(pio
, mask
);
1498 seq_printf(s
, "[%s] GPIO%s%d: ",
1499 gpio_label
, chip
->label
, i
);
1500 if (mode
== AT91_MUX_GPIO
) {
1501 seq_printf(s
, "[gpio] ");
1502 seq_printf(s
, "%s ",
1503 readl_relaxed(pio
+ PIO_OSR
) & mask
?
1504 "output" : "input");
1505 seq_printf(s
, "%s\n",
1506 readl_relaxed(pio
+ PIO_PDSR
) & mask
?
1509 seq_printf(s
, "[periph %c]\n",
1515 #define at91_gpio_dbg_show NULL
1518 /* Several AIC controller irqs are dispatched through this GPIO handler.
1519 * To use any AT91_PIN_* as an externally triggered IRQ, first call
1520 * at91_set_gpio_input() then maybe enable its glitch filter.
1521 * Then just request_irq() with the pin ID; it works like any ARM IRQ
1523 * First implementation always triggers on rising and falling edges
1524 * whereas the newer PIO3 can be additionally configured to trigger on
1525 * level, edge with any polarity.
1527 * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
1528 * configuring them with at91_set_a_periph() or at91_set_b_periph().
1529 * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
1532 static void gpio_irq_mask(struct irq_data
*d
)
1534 struct at91_gpio_chip
*at91_gpio
= irq_data_get_irq_chip_data(d
);
1535 void __iomem
*pio
= at91_gpio
->regbase
;
1536 unsigned mask
= 1 << d
->hwirq
;
1539 writel_relaxed(mask
, pio
+ PIO_IDR
);
1542 static void gpio_irq_unmask(struct irq_data
*d
)
1544 struct at91_gpio_chip
*at91_gpio
= irq_data_get_irq_chip_data(d
);
1545 void __iomem
*pio
= at91_gpio
->regbase
;
1546 unsigned mask
= 1 << d
->hwirq
;
1549 writel_relaxed(mask
, pio
+ PIO_IER
);
1552 static int gpio_irq_type(struct irq_data
*d
, unsigned type
)
1556 case IRQ_TYPE_EDGE_BOTH
:
1563 /* Alternate irq type for PIO3 support */
1564 static int alt_gpio_irq_type(struct irq_data
*d
, unsigned type
)
1566 struct at91_gpio_chip
*at91_gpio
= irq_data_get_irq_chip_data(d
);
1567 void __iomem
*pio
= at91_gpio
->regbase
;
1568 unsigned mask
= 1 << d
->hwirq
;
1571 case IRQ_TYPE_EDGE_RISING
:
1572 irq_set_handler_locked(d
, handle_simple_irq
);
1573 writel_relaxed(mask
, pio
+ PIO_ESR
);
1574 writel_relaxed(mask
, pio
+ PIO_REHLSR
);
1576 case IRQ_TYPE_EDGE_FALLING
:
1577 irq_set_handler_locked(d
, handle_simple_irq
);
1578 writel_relaxed(mask
, pio
+ PIO_ESR
);
1579 writel_relaxed(mask
, pio
+ PIO_FELLSR
);
1581 case IRQ_TYPE_LEVEL_LOW
:
1582 irq_set_handler_locked(d
, handle_level_irq
);
1583 writel_relaxed(mask
, pio
+ PIO_LSR
);
1584 writel_relaxed(mask
, pio
+ PIO_FELLSR
);
1586 case IRQ_TYPE_LEVEL_HIGH
:
1587 irq_set_handler_locked(d
, handle_level_irq
);
1588 writel_relaxed(mask
, pio
+ PIO_LSR
);
1589 writel_relaxed(mask
, pio
+ PIO_REHLSR
);
1591 case IRQ_TYPE_EDGE_BOTH
:
1593 * disable additional interrupt modes:
1594 * fall back to default behavior
1596 irq_set_handler_locked(d
, handle_simple_irq
);
1597 writel_relaxed(mask
, pio
+ PIO_AIMDR
);
1601 pr_warn("AT91: No type for GPIO irq offset %d\n", d
->irq
);
1605 /* enable additional interrupt modes */
1606 writel_relaxed(mask
, pio
+ PIO_AIMER
);
1611 static void gpio_irq_ack(struct irq_data
*d
)
1613 /* the interrupt is already cleared before by reading ISR */
1618 static u32 wakeups
[MAX_GPIO_BANKS
];
1619 static u32 backups
[MAX_GPIO_BANKS
];
1621 static int gpio_irq_set_wake(struct irq_data
*d
, unsigned state
)
1623 struct at91_gpio_chip
*at91_gpio
= irq_data_get_irq_chip_data(d
);
1624 unsigned bank
= at91_gpio
->pioc_idx
;
1625 unsigned mask
= 1 << d
->hwirq
;
1627 if (unlikely(bank
>= MAX_GPIO_BANKS
))
1631 wakeups
[bank
] |= mask
;
1633 wakeups
[bank
] &= ~mask
;
1635 irq_set_irq_wake(at91_gpio
->pioc_virq
, state
);
1640 void at91_pinctrl_gpio_suspend(void)
1644 for (i
= 0; i
< gpio_banks
; i
++) {
1650 pio
= gpio_chips
[i
]->regbase
;
1652 backups
[i
] = readl_relaxed(pio
+ PIO_IMR
);
1653 writel_relaxed(backups
[i
], pio
+ PIO_IDR
);
1654 writel_relaxed(wakeups
[i
], pio
+ PIO_IER
);
1657 clk_disable_unprepare(gpio_chips
[i
]->clock
);
1659 printk(KERN_DEBUG
"GPIO-%c may wake for %08x\n",
1664 void at91_pinctrl_gpio_resume(void)
1668 for (i
= 0; i
< gpio_banks
; i
++) {
1674 pio
= gpio_chips
[i
]->regbase
;
1677 clk_prepare_enable(gpio_chips
[i
]->clock
);
1679 writel_relaxed(wakeups
[i
], pio
+ PIO_IDR
);
1680 writel_relaxed(backups
[i
], pio
+ PIO_IER
);
1685 #define gpio_irq_set_wake NULL
1686 #endif /* CONFIG_PM */
1688 static void gpio_irq_handler(struct irq_desc
*desc
)
1690 struct irq_chip
*chip
= irq_desc_get_chip(desc
);
1691 struct gpio_chip
*gpio_chip
= irq_desc_get_handler_data(desc
);
1692 struct at91_gpio_chip
*at91_gpio
= gpiochip_get_data(gpio_chip
);
1693 void __iomem
*pio
= at91_gpio
->regbase
;
1697 chained_irq_enter(chip
, desc
);
1699 /* Reading ISR acks pending (edge triggered) GPIO interrupts.
1700 * When there are none pending, we're finished unless we need
1701 * to process multiple banks (like ID_PIOCDE on sam9263).
1703 isr
= readl_relaxed(pio
+ PIO_ISR
) & readl_relaxed(pio
+ PIO_IMR
);
1705 if (!at91_gpio
->next
)
1707 at91_gpio
= at91_gpio
->next
;
1708 pio
= at91_gpio
->regbase
;
1709 gpio_chip
= &at91_gpio
->chip
;
1713 for_each_set_bit(n
, &isr
, BITS_PER_LONG
) {
1714 generic_handle_irq(irq_find_mapping(
1715 gpio_chip
->irq
.domain
, n
));
1718 chained_irq_exit(chip
, desc
);
1719 /* now it may re-trigger */
1722 static int at91_gpio_of_irq_setup(struct platform_device
*pdev
,
1723 struct at91_gpio_chip
*at91_gpio
)
1725 struct gpio_chip
*gpiochip_prev
= NULL
;
1726 struct at91_gpio_chip
*prev
= NULL
;
1727 struct irq_data
*d
= irq_get_irq_data(at91_gpio
->pioc_virq
);
1728 struct irq_chip
*gpio_irqchip
;
1729 struct gpio_irq_chip
*girq
;
1732 gpio_irqchip
= devm_kzalloc(&pdev
->dev
, sizeof(*gpio_irqchip
),
1737 at91_gpio
->pioc_hwirq
= irqd_to_hwirq(d
);
1739 gpio_irqchip
->name
= "GPIO";
1740 gpio_irqchip
->irq_ack
= gpio_irq_ack
;
1741 gpio_irqchip
->irq_disable
= gpio_irq_mask
;
1742 gpio_irqchip
->irq_mask
= gpio_irq_mask
;
1743 gpio_irqchip
->irq_unmask
= gpio_irq_unmask
;
1744 gpio_irqchip
->irq_set_wake
= gpio_irq_set_wake
,
1745 gpio_irqchip
->irq_set_type
= at91_gpio
->ops
->irq_type
;
1747 /* Disable irqs of this PIO controller */
1748 writel_relaxed(~0, at91_gpio
->regbase
+ PIO_IDR
);
1751 * Let the generic code handle this edge IRQ, the the chained
1752 * handler will perform the actual work of handling the parent
1755 girq
= &at91_gpio
->chip
.irq
;
1756 girq
->chip
= gpio_irqchip
;
1757 girq
->default_type
= IRQ_TYPE_NONE
;
1758 girq
->handler
= handle_edge_irq
;
1761 * The top level handler handles one bank of GPIOs, except
1762 * on some SoC it can handle up to three...
1763 * We only set up the handler for the first of the list.
1765 gpiochip_prev
= irq_get_handler_data(at91_gpio
->pioc_virq
);
1766 if (!gpiochip_prev
) {
1767 girq
->parent_handler
= gpio_irq_handler
;
1768 girq
->num_parents
= 1;
1769 girq
->parents
= devm_kcalloc(&pdev
->dev
, 1,
1770 sizeof(*girq
->parents
),
1774 girq
->parents
[0] = at91_gpio
->pioc_virq
;
1778 prev
= gpiochip_get_data(gpiochip_prev
);
1779 /* we can only have 2 banks before */
1780 for (i
= 0; i
< 2; i
++) {
1784 prev
->next
= at91_gpio
;
1792 /* This structure is replicated for each GPIO block allocated at probe time */
1793 static const struct gpio_chip at91_gpio_template
= {
1794 .request
= gpiochip_generic_request
,
1795 .free
= gpiochip_generic_free
,
1796 .get_direction
= at91_gpio_get_direction
,
1797 .direction_input
= at91_gpio_direction_input
,
1798 .get
= at91_gpio_get
,
1799 .direction_output
= at91_gpio_direction_output
,
1800 .set
= at91_gpio_set
,
1801 .set_multiple
= at91_gpio_set_multiple
,
1802 .dbg_show
= at91_gpio_dbg_show
,
1804 .ngpio
= MAX_NB_GPIO_PER_BANK
,
1807 static const struct of_device_id at91_gpio_of_match
[] = {
1808 { .compatible
= "atmel,at91sam9x5-gpio", .data
= &at91sam9x5_ops
, },
1809 { .compatible
= "atmel,at91rm9200-gpio", .data
= &at91rm9200_ops
},
1810 { .compatible
= "microchip,sam9x60-gpio", .data
= &sam9x60_ops
},
1814 static int at91_gpio_probe(struct platform_device
*pdev
)
1816 struct device_node
*np
= pdev
->dev
.of_node
;
1817 struct at91_gpio_chip
*at91_chip
= NULL
;
1818 struct gpio_chip
*chip
;
1819 struct pinctrl_gpio_range
*range
;
1822 int alias_idx
= of_alias_get_id(np
, "gpio");
1826 BUG_ON(alias_idx
>= ARRAY_SIZE(gpio_chips
));
1827 if (gpio_chips
[alias_idx
]) {
1832 irq
= platform_get_irq(pdev
, 0);
1838 at91_chip
= devm_kzalloc(&pdev
->dev
, sizeof(*at91_chip
), GFP_KERNEL
);
1844 at91_chip
->regbase
= devm_platform_ioremap_resource(pdev
, 0);
1845 if (IS_ERR(at91_chip
->regbase
)) {
1846 ret
= PTR_ERR(at91_chip
->regbase
);
1850 at91_chip
->ops
= (struct at91_pinctrl_mux_ops
*)
1851 of_match_device(at91_gpio_of_match
, &pdev
->dev
)->data
;
1852 at91_chip
->pioc_virq
= irq
;
1853 at91_chip
->pioc_idx
= alias_idx
;
1855 at91_chip
->clock
= devm_clk_get(&pdev
->dev
, NULL
);
1856 if (IS_ERR(at91_chip
->clock
)) {
1857 dev_err(&pdev
->dev
, "failed to get clock, ignoring.\n");
1858 ret
= PTR_ERR(at91_chip
->clock
);
1862 ret
= clk_prepare_enable(at91_chip
->clock
);
1864 dev_err(&pdev
->dev
, "failed to prepare and enable clock, ignoring.\n");
1865 goto clk_enable_err
;
1868 at91_chip
->chip
= at91_gpio_template
;
1870 chip
= &at91_chip
->chip
;
1872 chip
->label
= dev_name(&pdev
->dev
);
1873 chip
->parent
= &pdev
->dev
;
1874 chip
->owner
= THIS_MODULE
;
1875 chip
->base
= alias_idx
* MAX_NB_GPIO_PER_BANK
;
1877 if (!of_property_read_u32(np
, "#gpio-lines", &ngpio
)) {
1878 if (ngpio
>= MAX_NB_GPIO_PER_BANK
)
1879 pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
1880 alias_idx
, MAX_NB_GPIO_PER_BANK
, MAX_NB_GPIO_PER_BANK
);
1882 chip
->ngpio
= ngpio
;
1885 names
= devm_kcalloc(&pdev
->dev
, chip
->ngpio
, sizeof(char *),
1890 goto clk_enable_err
;
1893 for (i
= 0; i
< chip
->ngpio
; i
++)
1894 names
[i
] = kasprintf(GFP_KERNEL
, "pio%c%d", alias_idx
+ 'A', i
);
1896 chip
->names
= (const char *const *)names
;
1898 range
= &at91_chip
->range
;
1899 range
->name
= chip
->label
;
1900 range
->id
= alias_idx
;
1901 range
->pin_base
= range
->base
= range
->id
* MAX_NB_GPIO_PER_BANK
;
1903 range
->npins
= chip
->ngpio
;
1906 ret
= at91_gpio_of_irq_setup(pdev
, at91_chip
);
1908 goto gpiochip_add_err
;
1910 ret
= gpiochip_add_data(chip
, at91_chip
);
1912 goto gpiochip_add_err
;
1914 gpio_chips
[alias_idx
] = at91_chip
;
1915 gpio_banks
= max(gpio_banks
, alias_idx
+ 1);
1917 dev_info(&pdev
->dev
, "at address %p\n", at91_chip
->regbase
);
1923 clk_disable_unprepare(at91_chip
->clock
);
1925 dev_err(&pdev
->dev
, "Failure %i for GPIO %i\n", ret
, alias_idx
);
1930 static struct platform_driver at91_gpio_driver
= {
1932 .name
= "gpio-at91",
1933 .of_match_table
= at91_gpio_of_match
,
1935 .probe
= at91_gpio_probe
,
1938 static struct platform_driver at91_pinctrl_driver
= {
1940 .name
= "pinctrl-at91",
1941 .of_match_table
= at91_pinctrl_of_match
,
1943 .probe
= at91_pinctrl_probe
,
1946 static struct platform_driver
* const drivers
[] = {
1948 &at91_pinctrl_driver
,
1951 static int __init
at91_pinctrl_init(void)
1953 return platform_register_drivers(drivers
, ARRAY_SIZE(drivers
));
1955 arch_initcall(at91_pinctrl_init
);