1 // SPDX-License-Identifier: GPL-2.0
3 * Combined GPIO and pin controller support for Renesas RZ/A2 (R7S9210) SoC
5 * Copyright (C) 2018 Chris Brandt
9 * This pin controller/gpio combined driver supports Renesas devices of RZ/A2
13 #include <linux/bitops.h>
14 #include <linux/gpio/driver.h>
16 #include <linux/module.h>
17 #include <linux/of_device.h>
18 #include <linux/pinctrl/pinmux.h>
23 #define DRIVER_NAME "pinctrl-rza2"
25 #define RZA2_PINS_PER_PORT 8
26 #define RZA2_PIN_ID_TO_PORT(id) ((id) / RZA2_PINS_PER_PORT)
27 #define RZA2_PIN_ID_TO_PIN(id) ((id) % RZA2_PINS_PER_PORT)
30 * Use 16 lower bits [15:0] for pin identifier
31 * Use 16 higher bits [31:16] for pin mux function
33 #define MUX_PIN_ID_MASK GENMASK(15, 0)
34 #define MUX_FUNC_MASK GENMASK(31, 16)
35 #define MUX_FUNC_OFFS 16
36 #define MUX_FUNC(pinconf) ((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
38 static const char port_names
[] = "0123456789ABCDEFGHJKLM";
40 struct rza2_pinctrl_priv
{
44 struct pinctrl_pin_desc
*pins
;
45 struct pinctrl_desc desc
;
46 struct pinctrl_dev
*pctl
;
47 struct pinctrl_gpio_range gpio_range
;
51 #define RZA2_PDR(port) (0x0000 + (port) * 2) /* Direction 16-bit */
52 #define RZA2_PODR(port) (0x0040 + (port)) /* Output Data 8-bit */
53 #define RZA2_PIDR(port) (0x0060 + (port)) /* Input Data 8-bit */
54 #define RZA2_PMR(port) (0x0080 + (port)) /* Mode 8-bit */
55 #define RZA2_DSCR(port) (0x0140 + (port) * 2) /* Drive 16-bit */
56 #define RZA2_PFS(port, pin) (0x0200 + ((port) * 8) + (pin)) /* Fnct 8-bit */
58 #define RZA2_PWPR 0x02ff /* Write Protect 8-bit */
59 #define RZA2_PFENET 0x0820 /* Ethernet Pins 8-bit */
60 #define RZA2_PPOC 0x0900 /* Dedicated Pins 32-bit */
61 #define RZA2_PHMOMO 0x0980 /* Peripheral Pins 32-bit */
62 #define RZA2_PCKIO 0x09d0 /* CKIO Drive 8-bit */
64 #define RZA2_PDR_INPUT 0x02
65 #define RZA2_PDR_OUTPUT 0x03
66 #define RZA2_PDR_MASK 0x03
68 #define PWPR_B0WI BIT(7) /* Bit Write Disable */
69 #define PWPR_PFSWE BIT(6) /* PFS Register Write Enable */
70 #define PFS_ISEL BIT(6) /* Interrupt Select */
72 static void rza2_set_pin_function(void __iomem
*pfc_base
, u8 port
, u8 pin
,
79 /* Set pin to 'Non-use (Hi-z input protection)' */
80 reg16
= readw(pfc_base
+ RZA2_PDR(port
));
81 mask16
= RZA2_PDR_MASK
<< (pin
* 2);
83 writew(reg16
, pfc_base
+ RZA2_PDR(port
));
85 /* Temporarily switch to GPIO */
86 reg8
= readb(pfc_base
+ RZA2_PMR(port
));
88 writeb(reg8
, pfc_base
+ RZA2_PMR(port
));
90 /* PFS Register Write Protect : OFF */
91 writeb(0x00, pfc_base
+ RZA2_PWPR
); /* B0WI=0, PFSWE=0 */
92 writeb(PWPR_PFSWE
, pfc_base
+ RZA2_PWPR
); /* B0WI=0, PFSWE=1 */
94 /* Set Pin function (interrupt disabled, ISEL=0) */
95 writeb(func
, pfc_base
+ RZA2_PFS(port
, pin
));
97 /* PFS Register Write Protect : ON */
98 writeb(0x00, pfc_base
+ RZA2_PWPR
); /* B0WI=0, PFSWE=0 */
99 writeb(0x80, pfc_base
+ RZA2_PWPR
); /* B0WI=1, PFSWE=0 */
101 /* Port Mode : Peripheral module pin functions */
102 reg8
= readb(pfc_base
+ RZA2_PMR(port
));
104 writeb(reg8
, pfc_base
+ RZA2_PMR(port
));
107 static void rza2_pin_to_gpio(void __iomem
*pfc_base
, unsigned int offset
,
110 u8 port
= RZA2_PIN_ID_TO_PORT(offset
);
111 u8 pin
= RZA2_PIN_ID_TO_PIN(offset
);
115 reg16
= readw(pfc_base
+ RZA2_PDR(port
));
116 mask16
= RZA2_PDR_MASK
<< (pin
* 2);
120 reg16
|= RZA2_PDR_INPUT
<< (pin
* 2); /* pin as input */
122 reg16
|= RZA2_PDR_OUTPUT
<< (pin
* 2); /* pin as output */
124 writew(reg16
, pfc_base
+ RZA2_PDR(port
));
127 static int rza2_chip_get_direction(struct gpio_chip
*chip
, unsigned int offset
)
129 struct rza2_pinctrl_priv
*priv
= gpiochip_get_data(chip
);
130 u8 port
= RZA2_PIN_ID_TO_PORT(offset
);
131 u8 pin
= RZA2_PIN_ID_TO_PIN(offset
);
134 reg16
= readw(priv
->base
+ RZA2_PDR(port
));
135 reg16
= (reg16
>> (pin
* 2)) & RZA2_PDR_MASK
;
137 if (reg16
== RZA2_PDR_OUTPUT
)
138 return GPIO_LINE_DIRECTION_OUT
;
140 if (reg16
== RZA2_PDR_INPUT
)
141 return GPIO_LINE_DIRECTION_IN
;
144 * This GPIO controller has a default Hi-Z state that is not input or
145 * output, so force the pin to input now.
147 rza2_pin_to_gpio(priv
->base
, offset
, 1);
149 return GPIO_LINE_DIRECTION_IN
;
152 static int rza2_chip_direction_input(struct gpio_chip
*chip
,
155 struct rza2_pinctrl_priv
*priv
= gpiochip_get_data(chip
);
157 rza2_pin_to_gpio(priv
->base
, offset
, 1);
162 static int rza2_chip_get(struct gpio_chip
*chip
, unsigned int offset
)
164 struct rza2_pinctrl_priv
*priv
= gpiochip_get_data(chip
);
165 u8 port
= RZA2_PIN_ID_TO_PORT(offset
);
166 u8 pin
= RZA2_PIN_ID_TO_PIN(offset
);
168 return !!(readb(priv
->base
+ RZA2_PIDR(port
)) & BIT(pin
));
171 static void rza2_chip_set(struct gpio_chip
*chip
, unsigned int offset
,
174 struct rza2_pinctrl_priv
*priv
= gpiochip_get_data(chip
);
175 u8 port
= RZA2_PIN_ID_TO_PORT(offset
);
176 u8 pin
= RZA2_PIN_ID_TO_PIN(offset
);
179 new_value
= readb(priv
->base
+ RZA2_PODR(port
));
182 new_value
|= BIT(pin
);
184 new_value
&= ~BIT(pin
);
186 writeb(new_value
, priv
->base
+ RZA2_PODR(port
));
189 static int rza2_chip_direction_output(struct gpio_chip
*chip
,
190 unsigned int offset
, int val
)
192 struct rza2_pinctrl_priv
*priv
= gpiochip_get_data(chip
);
194 rza2_chip_set(chip
, offset
, val
);
195 rza2_pin_to_gpio(priv
->base
, offset
, 0);
200 static const char * const rza2_gpio_names
[] = {
201 "P0_0", "P0_1", "P0_2", "P0_3", "P0_4", "P0_5", "P0_6", "P0_7",
202 "P1_0", "P1_1", "P1_2", "P1_3", "P1_4", "P1_5", "P1_6", "P1_7",
203 "P2_0", "P2_1", "P2_2", "P2_3", "P2_4", "P2_5", "P2_6", "P2_7",
204 "P3_0", "P3_1", "P3_2", "P3_3", "P3_4", "P3_5", "P3_6", "P3_7",
205 "P4_0", "P4_1", "P4_2", "P4_3", "P4_4", "P4_5", "P4_6", "P4_7",
206 "P5_0", "P5_1", "P5_2", "P5_3", "P5_4", "P5_5", "P5_6", "P5_7",
207 "P6_0", "P6_1", "P6_2", "P6_3", "P6_4", "P6_5", "P6_6", "P6_7",
208 "P7_0", "P7_1", "P7_2", "P7_3", "P7_4", "P7_5", "P7_6", "P7_7",
209 "P8_0", "P8_1", "P8_2", "P8_3", "P8_4", "P8_5", "P8_6", "P8_7",
210 "P9_0", "P9_1", "P9_2", "P9_3", "P9_4", "P9_5", "P9_6", "P9_7",
211 "PA_0", "PA_1", "PA_2", "PA_3", "PA_4", "PA_5", "PA_6", "PA_7",
212 "PB_0", "PB_1", "PB_2", "PB_3", "PB_4", "PB_5", "PB_6", "PB_7",
213 "PC_0", "PC_1", "PC_2", "PC_3", "PC_4", "PC_5", "PC_6", "PC_7",
214 "PD_0", "PD_1", "PD_2", "PD_3", "PD_4", "PD_5", "PD_6", "PD_7",
215 "PE_0", "PE_1", "PE_2", "PE_3", "PE_4", "PE_5", "PE_6", "PE_7",
216 "PF_0", "PF_1", "PF_2", "PF_3", "PF_4", "PF_5", "PF_6", "PF_7",
217 "PG_0", "PG_1", "PG_2", "PG_3", "PG_4", "PG_5", "PG_6", "PG_7",
218 "PH_0", "PH_1", "PH_2", "PH_3", "PH_4", "PH_5", "PH_6", "PH_7",
219 /* port I does not exist */
220 "PJ_0", "PJ_1", "PJ_2", "PJ_3", "PJ_4", "PJ_5", "PJ_6", "PJ_7",
221 "PK_0", "PK_1", "PK_2", "PK_3", "PK_4", "PK_5", "PK_6", "PK_7",
222 "PL_0", "PL_1", "PL_2", "PL_3", "PL_4", "PL_5", "PL_6", "PL_7",
223 "PM_0", "PM_1", "PM_2", "PM_3", "PM_4", "PM_5", "PM_6", "PM_7",
226 static struct gpio_chip chip
= {
227 .names
= rza2_gpio_names
,
229 .get_direction
= rza2_chip_get_direction
,
230 .direction_input
= rza2_chip_direction_input
,
231 .direction_output
= rza2_chip_direction_output
,
232 .get
= rza2_chip_get
,
233 .set
= rza2_chip_set
,
236 static int rza2_gpio_register(struct rza2_pinctrl_priv
*priv
)
238 struct device_node
*np
= priv
->dev
->of_node
;
239 struct of_phandle_args of_args
;
242 chip
.label
= devm_kasprintf(priv
->dev
, GFP_KERNEL
, "%pOFn", np
);
244 chip
.parent
= priv
->dev
;
245 chip
.ngpio
= priv
->npins
;
247 ret
= of_parse_phandle_with_fixed_args(np
, "gpio-ranges", 3, 0,
250 dev_err(priv
->dev
, "Unable to parse gpio-ranges\n");
254 if ((of_args
.args
[0] != 0) ||
255 (of_args
.args
[1] != 0) ||
256 (of_args
.args
[2] != priv
->npins
)) {
257 dev_err(priv
->dev
, "gpio-ranges does not match selected SOC\n");
260 priv
->gpio_range
.id
= 0;
261 priv
->gpio_range
.pin_base
= priv
->gpio_range
.base
= 0;
262 priv
->gpio_range
.npins
= priv
->npins
;
263 priv
->gpio_range
.name
= chip
.label
;
264 priv
->gpio_range
.gc
= &chip
;
266 /* Register our gpio chip with gpiolib */
267 ret
= devm_gpiochip_add_data(priv
->dev
, &chip
, priv
);
271 /* Register pin range with pinctrl core */
272 pinctrl_add_gpio_range(priv
->pctl
, &priv
->gpio_range
);
274 dev_dbg(priv
->dev
, "Registered gpio controller\n");
279 static int rza2_pinctrl_register(struct rza2_pinctrl_priv
*priv
)
281 struct pinctrl_pin_desc
*pins
;
285 pins
= devm_kcalloc(priv
->dev
, priv
->npins
, sizeof(*pins
), GFP_KERNEL
);
290 priv
->desc
.pins
= pins
;
291 priv
->desc
.npins
= priv
->npins
;
293 for (i
= 0; i
< priv
->npins
; i
++) {
295 pins
[i
].name
= rza2_gpio_names
[i
];
298 ret
= devm_pinctrl_register_and_init(priv
->dev
, &priv
->desc
, priv
,
301 dev_err(priv
->dev
, "pinctrl registration failed\n");
305 ret
= pinctrl_enable(priv
->pctl
);
307 dev_err(priv
->dev
, "pinctrl enable failed\n");
311 ret
= rza2_gpio_register(priv
);
313 dev_err(priv
->dev
, "GPIO registration failed\n");
321 * For each DT node, create a single pin mapping. That pin mapping will only
322 * contain a single group of pins, and that group of pins will only have a
323 * single function that can be selected.
325 static int rza2_dt_node_to_map(struct pinctrl_dev
*pctldev
,
326 struct device_node
*np
,
327 struct pinctrl_map
**map
,
328 unsigned int *num_maps
)
330 struct rza2_pinctrl_priv
*priv
= pinctrl_dev_get_drvdata(pctldev
);
331 unsigned int *pins
, *psel_val
;
332 int i
, ret
, npins
, gsel
, fsel
;
333 struct property
*of_pins
;
336 /* Find out how many pins to map */
337 of_pins
= of_find_property(np
, "pinmux", NULL
);
339 dev_info(priv
->dev
, "Missing pinmux property\n");
342 npins
= of_pins
->length
/ sizeof(u32
);
344 pins
= devm_kcalloc(priv
->dev
, npins
, sizeof(*pins
), GFP_KERNEL
);
345 psel_val
= devm_kcalloc(priv
->dev
, npins
, sizeof(*psel_val
),
347 pin_fn
= devm_kzalloc(priv
->dev
, sizeof(*pin_fn
), GFP_KERNEL
);
348 if (!pins
|| !psel_val
|| !pin_fn
)
351 /* Collect pin locations and mux settings from DT properties */
352 for (i
= 0; i
< npins
; ++i
) {
355 ret
= of_property_read_u32_index(np
, "pinmux", i
, &value
);
358 pins
[i
] = value
& MUX_PIN_ID_MASK
;
359 psel_val
[i
] = MUX_FUNC(value
);
362 /* Register a single pin group listing all the pins we read from DT */
363 gsel
= pinctrl_generic_add_group(pctldev
, np
->name
, pins
, npins
, NULL
);
368 * Register a single group function where the 'data' is an array PSEL
369 * register values read from DT.
371 pin_fn
[0] = np
->name
;
372 fsel
= pinmux_generic_add_function(pctldev
, np
->name
, pin_fn
, 1,
379 dev_dbg(priv
->dev
, "Parsed %pOF with %d pins\n", np
, npins
);
381 /* Create map where to retrieve function and mux settings from */
383 *map
= kzalloc(sizeof(**map
), GFP_KERNEL
);
386 goto remove_function
;
389 (*map
)->type
= PIN_MAP_TYPE_MUX_GROUP
;
390 (*map
)->data
.mux
.group
= np
->name
;
391 (*map
)->data
.mux
.function
= np
->name
;
397 pinmux_generic_remove_function(pctldev
, fsel
);
400 pinctrl_generic_remove_group(pctldev
, gsel
);
402 dev_err(priv
->dev
, "Unable to parse DT node %s\n", np
->name
);
407 static void rza2_dt_free_map(struct pinctrl_dev
*pctldev
,
408 struct pinctrl_map
*map
, unsigned int num_maps
)
413 static const struct pinctrl_ops rza2_pinctrl_ops
= {
414 .get_groups_count
= pinctrl_generic_get_group_count
,
415 .get_group_name
= pinctrl_generic_get_group_name
,
416 .get_group_pins
= pinctrl_generic_get_group_pins
,
417 .dt_node_to_map
= rza2_dt_node_to_map
,
418 .dt_free_map
= rza2_dt_free_map
,
421 static int rza2_set_mux(struct pinctrl_dev
*pctldev
, unsigned int selector
,
424 struct rza2_pinctrl_priv
*priv
= pinctrl_dev_get_drvdata(pctldev
);
425 struct function_desc
*func
;
426 unsigned int i
, *psel_val
;
427 struct group_desc
*grp
;
429 grp
= pinctrl_generic_get_group(pctldev
, group
);
433 func
= pinmux_generic_get_function(pctldev
, selector
);
437 psel_val
= func
->data
;
439 for (i
= 0; i
< grp
->num_pins
; ++i
) {
440 dev_dbg(priv
->dev
, "Setting P%c_%d to PSEL=%d\n",
441 port_names
[RZA2_PIN_ID_TO_PORT(grp
->pins
[i
])],
442 RZA2_PIN_ID_TO_PIN(grp
->pins
[i
]),
444 rza2_set_pin_function(
446 RZA2_PIN_ID_TO_PORT(grp
->pins
[i
]),
447 RZA2_PIN_ID_TO_PIN(grp
->pins
[i
]),
454 static const struct pinmux_ops rza2_pinmux_ops
= {
455 .get_functions_count
= pinmux_generic_get_function_count
,
456 .get_function_name
= pinmux_generic_get_function_name
,
457 .get_function_groups
= pinmux_generic_get_function_groups
,
458 .set_mux
= rza2_set_mux
,
462 static int rza2_pinctrl_probe(struct platform_device
*pdev
)
464 struct rza2_pinctrl_priv
*priv
;
467 priv
= devm_kzalloc(&pdev
->dev
, sizeof(*priv
), GFP_KERNEL
);
471 priv
->dev
= &pdev
->dev
;
473 priv
->base
= devm_platform_ioremap_resource(pdev
, 0);
474 if (IS_ERR(priv
->base
))
475 return PTR_ERR(priv
->base
);
477 platform_set_drvdata(pdev
, priv
);
479 priv
->npins
= (int)(uintptr_t)of_device_get_match_data(&pdev
->dev
) *
482 priv
->desc
.name
= DRIVER_NAME
;
483 priv
->desc
.pctlops
= &rza2_pinctrl_ops
;
484 priv
->desc
.pmxops
= &rza2_pinmux_ops
;
485 priv
->desc
.owner
= THIS_MODULE
;
487 ret
= rza2_pinctrl_register(priv
);
491 dev_info(&pdev
->dev
, "Registered ports P0 - P%c\n",
492 port_names
[priv
->desc
.npins
/ RZA2_PINS_PER_PORT
- 1]);
497 static const struct of_device_id rza2_pinctrl_of_match
[] = {
498 { .compatible
= "renesas,r7s9210-pinctrl", .data
= (void *)22, },
502 static struct platform_driver rza2_pinctrl_driver
= {
505 .of_match_table
= rza2_pinctrl_of_match
,
507 .probe
= rza2_pinctrl_probe
,
510 static int __init
rza2_pinctrl_init(void)
512 return platform_driver_register(&rza2_pinctrl_driver
);
514 core_initcall(rza2_pinctrl_init
);
516 MODULE_AUTHOR("Chris Brandt <chris.brandt@renesas.com>");
517 MODULE_DESCRIPTION("Pin and gpio controller driver for RZ/A2 SoC");
518 MODULE_LICENSE("GPL v2");