gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / rtc / rtc-88pm80x.c
blob75779e8501a30a21ca481fd51d53f2f38abaef20
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Real Time Clock driver for Marvell 88PM80x PMIC
5 * Copyright (c) 2012 Marvell International Ltd.
6 * Wenzeng Chen<wzch@marvell.com>
7 * Qiao Zhou <zhouqiao@marvell.com>
8 */
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/slab.h>
13 #include <linux/regmap.h>
14 #include <linux/mfd/core.h>
15 #include <linux/mfd/88pm80x.h>
16 #include <linux/rtc.h>
18 #define PM800_RTC_COUNTER1 (0xD1)
19 #define PM800_RTC_COUNTER2 (0xD2)
20 #define PM800_RTC_COUNTER3 (0xD3)
21 #define PM800_RTC_COUNTER4 (0xD4)
22 #define PM800_RTC_EXPIRE1_1 (0xD5)
23 #define PM800_RTC_EXPIRE1_2 (0xD6)
24 #define PM800_RTC_EXPIRE1_3 (0xD7)
25 #define PM800_RTC_EXPIRE1_4 (0xD8)
26 #define PM800_RTC_TRIM1 (0xD9)
27 #define PM800_RTC_TRIM2 (0xDA)
28 #define PM800_RTC_TRIM3 (0xDB)
29 #define PM800_RTC_TRIM4 (0xDC)
30 #define PM800_RTC_EXPIRE2_1 (0xDD)
31 #define PM800_RTC_EXPIRE2_2 (0xDE)
32 #define PM800_RTC_EXPIRE2_3 (0xDF)
33 #define PM800_RTC_EXPIRE2_4 (0xE0)
35 #define PM800_POWER_DOWN_LOG1 (0xE5)
36 #define PM800_POWER_DOWN_LOG2 (0xE6)
38 struct pm80x_rtc_info {
39 struct pm80x_chip *chip;
40 struct regmap *map;
41 struct rtc_device *rtc_dev;
42 struct device *dev;
44 int irq;
47 static irqreturn_t rtc_update_handler(int irq, void *data)
49 struct pm80x_rtc_info *info = (struct pm80x_rtc_info *)data;
50 int mask;
52 mask = PM800_ALARM | PM800_ALARM_WAKEUP;
53 regmap_update_bits(info->map, PM800_RTC_CONTROL, mask | PM800_ALARM1_EN,
54 mask);
55 rtc_update_irq(info->rtc_dev, 1, RTC_AF);
56 return IRQ_HANDLED;
59 static int pm80x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
61 struct pm80x_rtc_info *info = dev_get_drvdata(dev);
63 if (enabled)
64 regmap_update_bits(info->map, PM800_RTC_CONTROL,
65 PM800_ALARM1_EN, PM800_ALARM1_EN);
66 else
67 regmap_update_bits(info->map, PM800_RTC_CONTROL,
68 PM800_ALARM1_EN, 0);
69 return 0;
73 * Calculate the next alarm time given the requested alarm time mask
74 * and the current time.
76 static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
77 struct rtc_time *alrm)
79 unsigned long next_time;
80 unsigned long now_time;
82 next->tm_year = now->tm_year;
83 next->tm_mon = now->tm_mon;
84 next->tm_mday = now->tm_mday;
85 next->tm_hour = alrm->tm_hour;
86 next->tm_min = alrm->tm_min;
87 next->tm_sec = alrm->tm_sec;
89 now_time = rtc_tm_to_time64(now);
90 next_time = rtc_tm_to_time64(next);
92 if (next_time < now_time) {
93 /* Advance one day */
94 next_time += 60 * 60 * 24;
95 rtc_time64_to_tm(next_time, next);
99 static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
101 struct pm80x_rtc_info *info = dev_get_drvdata(dev);
102 unsigned char buf[4];
103 unsigned long ticks, base, data;
104 regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
105 base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
106 (buf[1] << 8) | buf[0];
107 dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
109 /* load 32-bit read-only counter */
110 regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
111 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
112 (buf[1] << 8) | buf[0];
113 ticks = base + data;
114 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
115 base, data, ticks);
116 rtc_time64_to_tm(ticks, tm);
117 return 0;
120 static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
122 struct pm80x_rtc_info *info = dev_get_drvdata(dev);
123 unsigned char buf[4];
124 unsigned long ticks, base, data;
126 ticks = rtc_tm_to_time64(tm);
128 /* load 32-bit read-only counter */
129 regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
130 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
131 (buf[1] << 8) | buf[0];
132 base = ticks - data;
133 dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
134 base, data, ticks);
135 buf[0] = base & 0xFF;
136 buf[1] = (base >> 8) & 0xFF;
137 buf[2] = (base >> 16) & 0xFF;
138 buf[3] = (base >> 24) & 0xFF;
139 regmap_raw_write(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
141 return 0;
144 static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
146 struct pm80x_rtc_info *info = dev_get_drvdata(dev);
147 unsigned char buf[4];
148 unsigned long ticks, base, data;
149 int ret;
151 regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
152 base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
153 (buf[1] << 8) | buf[0];
154 dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
156 regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
157 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
158 (buf[1] << 8) | buf[0];
159 ticks = base + data;
160 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
161 base, data, ticks);
163 rtc_time64_to_tm(ticks, &alrm->time);
164 regmap_read(info->map, PM800_RTC_CONTROL, &ret);
165 alrm->enabled = (ret & PM800_ALARM1_EN) ? 1 : 0;
166 alrm->pending = (ret & (PM800_ALARM | PM800_ALARM_WAKEUP)) ? 1 : 0;
167 return 0;
170 static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
172 struct pm80x_rtc_info *info = dev_get_drvdata(dev);
173 struct rtc_time now_tm, alarm_tm;
174 unsigned long ticks, base, data;
175 unsigned char buf[4];
176 int mask;
178 regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0);
180 regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
181 base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
182 (buf[1] << 8) | buf[0];
183 dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
185 /* load 32-bit read-only counter */
186 regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
187 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
188 (buf[1] << 8) | buf[0];
189 ticks = base + data;
190 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
191 base, data, ticks);
193 rtc_time64_to_tm(ticks, &now_tm);
194 dev_dbg(info->dev, "%s, now time : %lu\n", __func__, ticks);
195 rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
196 /* get new ticks for alarm in 24 hours */
197 ticks = rtc_tm_to_time64(&alarm_tm);
198 dev_dbg(info->dev, "%s, alarm time: %lu\n", __func__, ticks);
199 data = ticks - base;
201 buf[0] = data & 0xff;
202 buf[1] = (data >> 8) & 0xff;
203 buf[2] = (data >> 16) & 0xff;
204 buf[3] = (data >> 24) & 0xff;
205 regmap_raw_write(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
206 if (alrm->enabled) {
207 mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN;
208 regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, mask);
209 } else {
210 mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN;
211 regmap_update_bits(info->map, PM800_RTC_CONTROL, mask,
212 PM800_ALARM | PM800_ALARM_WAKEUP);
214 return 0;
217 static const struct rtc_class_ops pm80x_rtc_ops = {
218 .read_time = pm80x_rtc_read_time,
219 .set_time = pm80x_rtc_set_time,
220 .read_alarm = pm80x_rtc_read_alarm,
221 .set_alarm = pm80x_rtc_set_alarm,
222 .alarm_irq_enable = pm80x_rtc_alarm_irq_enable,
225 #ifdef CONFIG_PM_SLEEP
226 static int pm80x_rtc_suspend(struct device *dev)
228 return pm80x_dev_suspend(dev);
231 static int pm80x_rtc_resume(struct device *dev)
233 return pm80x_dev_resume(dev);
235 #endif
237 static SIMPLE_DEV_PM_OPS(pm80x_rtc_pm_ops, pm80x_rtc_suspend, pm80x_rtc_resume);
239 static int pm80x_rtc_probe(struct platform_device *pdev)
241 struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
242 struct pm80x_rtc_pdata *pdata = dev_get_platdata(&pdev->dev);
243 struct pm80x_rtc_info *info;
244 struct device_node *node = pdev->dev.of_node;
245 int ret;
247 if (!pdata && !node) {
248 dev_err(&pdev->dev,
249 "pm80x-rtc requires platform data or of_node\n");
250 return -EINVAL;
253 if (!pdata) {
254 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
255 if (!pdata) {
256 dev_err(&pdev->dev, "failed to allocate memory\n");
257 return -ENOMEM;
261 info =
262 devm_kzalloc(&pdev->dev, sizeof(struct pm80x_rtc_info), GFP_KERNEL);
263 if (!info)
264 return -ENOMEM;
265 info->irq = platform_get_irq(pdev, 0);
266 if (info->irq < 0) {
267 ret = -EINVAL;
268 goto out;
271 info->chip = chip;
272 info->map = chip->regmap;
273 if (!info->map) {
274 dev_err(&pdev->dev, "no regmap!\n");
275 ret = -EINVAL;
276 goto out;
279 info->dev = &pdev->dev;
280 dev_set_drvdata(&pdev->dev, info);
282 info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
283 if (IS_ERR(info->rtc_dev))
284 return PTR_ERR(info->rtc_dev);
286 ret = pm80x_request_irq(chip, info->irq, rtc_update_handler,
287 IRQF_ONESHOT, "rtc", info);
288 if (ret < 0) {
289 dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
290 info->irq, ret);
291 goto out;
294 info->rtc_dev->ops = &pm80x_rtc_ops;
295 info->rtc_dev->range_max = U32_MAX;
297 ret = rtc_register_device(info->rtc_dev);
298 if (ret)
299 goto out_rtc;
302 * enable internal XO instead of internal 3.25MHz clock since it can
303 * free running in PMIC power-down state.
305 regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_RTC1_USE_XO,
306 PM800_RTC1_USE_XO);
308 /* remember whether this power up is caused by PMIC RTC or not */
309 info->rtc_dev->dev.platform_data = &pdata->rtc_wakeup;
311 device_init_wakeup(&pdev->dev, 1);
313 return 0;
314 out_rtc:
315 pm80x_free_irq(chip, info->irq, info);
316 out:
317 return ret;
320 static int pm80x_rtc_remove(struct platform_device *pdev)
322 struct pm80x_rtc_info *info = platform_get_drvdata(pdev);
323 pm80x_free_irq(info->chip, info->irq, info);
324 return 0;
327 static struct platform_driver pm80x_rtc_driver = {
328 .driver = {
329 .name = "88pm80x-rtc",
330 .pm = &pm80x_rtc_pm_ops,
332 .probe = pm80x_rtc_probe,
333 .remove = pm80x_rtc_remove,
336 module_platform_driver(pm80x_rtc_driver);
338 MODULE_LICENSE("GPL");
339 MODULE_DESCRIPTION("Marvell 88PM80x RTC driver");
340 MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
341 MODULE_ALIAS("platform:88pm80x-rtc");