2 * QLogic iSCSI HBA Driver
3 * Copyright (c) 2003-2013 QLogic Corporation
5 * See LICENSE.qla4xxx for copyright and licensing details.
8 #include <linux/ctype.h>
12 #include "ql4_inline.h"
13 #include "ql4_version.h"
15 void qla4xxx_queue_mbox_cmd(struct scsi_qla_host
*ha
, uint32_t *mbx_cmd
,
20 /* Load all mailbox registers, except mailbox 0. */
21 for (i
= 1; i
< in_count
; i
++)
22 writel(mbx_cmd
[i
], &ha
->reg
->mailbox
[i
]);
25 writel(mbx_cmd
[0], &ha
->reg
->mailbox
[0]);
26 readl(&ha
->reg
->mailbox
[0]);
27 writel(set_rmask(CSR_INTR_RISC
), &ha
->reg
->ctrl_status
);
28 readl(&ha
->reg
->ctrl_status
);
31 void qla4xxx_process_mbox_intr(struct scsi_qla_host
*ha
, int out_count
)
35 intr_status
= readl(&ha
->reg
->ctrl_status
);
36 if (intr_status
& INTR_PENDING
) {
38 * Service the interrupt.
39 * The ISR will save the mailbox status registers
40 * to a temporary storage location in the adapter structure.
42 ha
->mbox_status_count
= out_count
;
43 ha
->isp_ops
->interrupt_service_routine(ha
, intr_status
);
48 * qla4xxx_is_intr_poll_mode – Are we allowed to poll for interrupts?
49 * @ha: Pointer to host adapter structure.
50 * @ret: 1=polling mode, 0=non-polling mode
52 static int qla4xxx_is_intr_poll_mode(struct scsi_qla_host
*ha
)
56 if (is_qla8032(ha
) || is_qla8042(ha
)) {
57 if (test_bit(AF_IRQ_ATTACHED
, &ha
->flags
) &&
58 test_bit(AF_83XX_MBOX_INTR_ON
, &ha
->flags
))
61 if (test_bit(AF_IRQ_ATTACHED
, &ha
->flags
) &&
62 test_bit(AF_INTERRUPTS_ON
, &ha
->flags
) &&
63 test_bit(AF_ONLINE
, &ha
->flags
) &&
64 !test_bit(AF_HA_REMOVAL
, &ha
->flags
))
72 * qla4xxx_mailbox_command - issues mailbox commands
73 * @ha: Pointer to host adapter structure.
74 * @inCount: number of mailbox registers to load.
75 * @outCount: number of mailbox registers to return.
76 * @mbx_cmd: data pointer for mailbox in registers.
77 * @mbx_sts: data pointer for mailbox out registers.
79 * This routine issue mailbox commands and waits for completion.
80 * If outCount is 0, this routine completes successfully WITHOUT waiting
81 * for the mailbox command to complete.
83 int qla4xxx_mailbox_command(struct scsi_qla_host
*ha
, uint8_t inCount
,
84 uint8_t outCount
, uint32_t *mbx_cmd
,
87 int status
= QLA_ERROR
;
90 unsigned long flags
= 0;
93 /* Make sure that pointers are valid */
94 if (!mbx_cmd
|| !mbx_sts
) {
95 DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
96 "pointer\n", ha
->host_no
, __func__
));
100 if (is_qla40XX(ha
)) {
101 if (test_bit(AF_HA_REMOVAL
, &ha
->flags
)) {
102 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "scsi%ld: %s: "
103 "prematurely completing mbx cmd as "
104 "adapter removal detected\n",
105 ha
->host_no
, __func__
));
110 if ((is_aer_supported(ha
)) &&
111 (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE
, &ha
->flags
))) {
112 DEBUG2(printk(KERN_WARNING
"scsi%ld: %s: Perm failure on EEH, "
113 "timeout MBX Exiting.\n", ha
->host_no
, __func__
));
117 /* Mailbox code active */
118 wait_count
= MBOX_TOV
* 100;
120 while (wait_count
--) {
121 mutex_lock(&ha
->mbox_sem
);
122 if (!test_bit(AF_MBOX_COMMAND
, &ha
->flags
)) {
123 set_bit(AF_MBOX_COMMAND
, &ha
->flags
);
124 mutex_unlock(&ha
->mbox_sem
);
127 mutex_unlock(&ha
->mbox_sem
);
129 DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
130 ha
->host_no
, __func__
));
136 if (is_qla80XX(ha
)) {
137 if (test_bit(AF_FW_RECOVERY
, &ha
->flags
)) {
138 DEBUG2(ql4_printk(KERN_WARNING
, ha
,
139 "scsi%ld: %s: prematurely completing mbx cmd as firmware recovery detected\n",
140 ha
->host_no
, __func__
));
143 /* Do not send any mbx cmd if h/w is in failed state*/
144 ha
->isp_ops
->idc_lock(ha
);
145 dev_state
= qla4_8xxx_rd_direct(ha
, QLA8XXX_CRB_DEV_STATE
);
146 ha
->isp_ops
->idc_unlock(ha
);
147 if (dev_state
== QLA8XXX_DEV_FAILED
) {
148 ql4_printk(KERN_WARNING
, ha
,
149 "scsi%ld: %s: H/W is in failed state, do not send any mailbox commands\n",
150 ha
->host_no
, __func__
);
155 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
157 ha
->mbox_status_count
= outCount
;
158 for (i
= 0; i
< outCount
; i
++)
159 ha
->mbox_status
[i
] = 0;
161 /* Queue the mailbox command to the firmware */
162 ha
->isp_ops
->queue_mailbox_command(ha
, mbx_cmd
, inCount
);
164 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
166 /* Wait for completion */
169 * If we don't want status, don't wait for the mailbox command to
170 * complete. For example, MBOX_CMD_RESET_FW doesn't return status,
171 * you must poll the inbound Interrupt Mask for completion.
174 status
= QLA_SUCCESS
;
179 * Wait for completion: Poll or completion queue
181 if (qla4xxx_is_intr_poll_mode(ha
)) {
182 /* Poll for command to complete */
183 wait_count
= jiffies
+ MBOX_TOV
* HZ
;
184 while (test_bit(AF_MBOX_COMMAND_DONE
, &ha
->flags
) == 0) {
185 if (time_after_eq(jiffies
, wait_count
))
188 * Service the interrupt.
189 * The ISR will save the mailbox status registers
190 * to a temporary storage location in the adapter
193 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
194 ha
->isp_ops
->process_mailbox_interrupt(ha
, outCount
);
195 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
199 /* Do not poll for completion. Use completion queue */
200 set_bit(AF_MBOX_COMMAND_NOPOLL
, &ha
->flags
);
201 wait_for_completion_timeout(&ha
->mbx_intr_comp
, MBOX_TOV
* HZ
);
202 clear_bit(AF_MBOX_COMMAND_NOPOLL
, &ha
->flags
);
205 /* Check for mailbox timeout. */
206 if (!test_bit(AF_MBOX_COMMAND_DONE
, &ha
->flags
)) {
207 if (is_qla80XX(ha
) &&
208 test_bit(AF_FW_RECOVERY
, &ha
->flags
)) {
209 DEBUG2(ql4_printk(KERN_INFO
, ha
,
210 "scsi%ld: %s: prematurely completing mbx cmd as "
211 "firmware recovery detected\n",
212 ha
->host_no
, __func__
));
215 ql4_printk(KERN_WARNING
, ha
, "scsi%ld: Mailbox Cmd 0x%08X timed out, Scheduling Adapter Reset\n",
216 ha
->host_no
, mbx_cmd
[0]);
217 ha
->mailbox_timeout_count
++;
219 set_bit(DPC_RESET_HA
, &ha
->dpc_flags
);
220 if (is_qla8022(ha
)) {
221 ql4_printk(KERN_INFO
, ha
,
222 "disabling pause transmit on port 0 & 1.\n");
223 qla4_82xx_wr_32(ha
, QLA82XX_CRB_NIU
+ 0x98,
224 CRB_NIU_XG_PAUSE_CTL_P0
|
225 CRB_NIU_XG_PAUSE_CTL_P1
);
226 } else if (is_qla8032(ha
) || is_qla8042(ha
)) {
227 ql4_printk(KERN_INFO
, ha
, " %s: disabling pause transmit on port 0 & 1.\n",
229 qla4_83xx_disable_pause(ha
);
235 * Copy the mailbox out registers to the caller's mailbox in/out
238 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
239 for (i
= 0; i
< outCount
; i
++)
240 mbx_sts
[i
] = ha
->mbox_status
[i
];
242 /* Set return status and error flags (if applicable). */
243 switch (ha
->mbox_status
[0]) {
244 case MBOX_STS_COMMAND_COMPLETE
:
245 status
= QLA_SUCCESS
;
248 case MBOX_STS_INTERMEDIATE_COMPLETION
:
249 status
= QLA_SUCCESS
;
253 ql4_printk(KERN_WARNING
, ha
, "scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
254 ha
->host_no
, __func__
, mbx_cmd
[0]);
255 ha
->mailbox_timeout_count
++;
259 ql4_printk(KERN_WARNING
, ha
, "scsi%ld: %s: FAILED, MBOX CMD = %08X, MBOX STS = %08X %08X %08X %08X %08X %08X %08X %08X\n",
260 ha
->host_no
, __func__
, mbx_cmd
[0], mbx_sts
[0],
261 mbx_sts
[1], mbx_sts
[2], mbx_sts
[3], mbx_sts
[4],
262 mbx_sts
[5], mbx_sts
[6], mbx_sts
[7]);
265 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
268 mutex_lock(&ha
->mbox_sem
);
269 clear_bit(AF_MBOX_COMMAND
, &ha
->flags
);
270 mutex_unlock(&ha
->mbox_sem
);
271 clear_bit(AF_MBOX_COMMAND_DONE
, &ha
->flags
);
277 * qla4xxx_get_minidump_template - Get the firmware template
278 * @ha: Pointer to host adapter structure.
279 * @phys_addr: dma address for template
281 * Obtain the minidump template from firmware during initialization
282 * as it may not be available when minidump is desired.
284 int qla4xxx_get_minidump_template(struct scsi_qla_host
*ha
,
285 dma_addr_t phys_addr
)
287 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
288 uint32_t mbox_sts
[MBOX_REG_COUNT
];
291 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
292 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
294 mbox_cmd
[0] = MBOX_CMD_MINIDUMP
;
295 mbox_cmd
[1] = MINIDUMP_GET_TMPLT_SUBCOMMAND
;
296 mbox_cmd
[2] = LSDW(phys_addr
);
297 mbox_cmd
[3] = MSDW(phys_addr
);
298 mbox_cmd
[4] = ha
->fw_dump_tmplt_size
;
301 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 2, &mbox_cmd
[0],
303 if (status
!= QLA_SUCCESS
) {
304 DEBUG2(ql4_printk(KERN_INFO
, ha
,
305 "scsi%ld: %s: Cmd = %08X, mbx[0] = 0x%04x, mbx[1] = 0x%04x\n",
306 ha
->host_no
, __func__
, mbox_cmd
[0],
307 mbox_sts
[0], mbox_sts
[1]));
313 * qla4xxx_req_template_size - Get minidump template size from firmware.
314 * @ha: Pointer to host adapter structure.
316 int qla4xxx_req_template_size(struct scsi_qla_host
*ha
)
318 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
319 uint32_t mbox_sts
[MBOX_REG_COUNT
];
322 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
323 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
325 mbox_cmd
[0] = MBOX_CMD_MINIDUMP
;
326 mbox_cmd
[1] = MINIDUMP_GET_SIZE_SUBCOMMAND
;
328 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 8, &mbox_cmd
[0],
330 if (status
== QLA_SUCCESS
) {
331 ha
->fw_dump_tmplt_size
= mbox_sts
[1];
332 DEBUG2(ql4_printk(KERN_INFO
, ha
,
333 "%s: sts[0]=0x%04x, template size=0x%04x, size_cm_02=0x%04x, size_cm_04=0x%04x, size_cm_08=0x%04x, size_cm_10=0x%04x, size_cm_FF=0x%04x, version=0x%04x\n",
334 __func__
, mbox_sts
[0], mbox_sts
[1],
335 mbox_sts
[2], mbox_sts
[3], mbox_sts
[4],
336 mbox_sts
[5], mbox_sts
[6], mbox_sts
[7]));
337 if (ha
->fw_dump_tmplt_size
== 0)
340 ql4_printk(KERN_WARNING
, ha
,
341 "%s: Error sts[0]=0x%04x, mbx[1]=0x%04x\n",
342 __func__
, mbox_sts
[0], mbox_sts
[1]);
349 void qla4xxx_mailbox_premature_completion(struct scsi_qla_host
*ha
)
351 set_bit(AF_FW_RECOVERY
, &ha
->flags
);
352 ql4_printk(KERN_INFO
, ha
, "scsi%ld: %s: set FW RECOVERY!\n",
353 ha
->host_no
, __func__
);
355 if (test_bit(AF_MBOX_COMMAND
, &ha
->flags
)) {
356 if (test_bit(AF_MBOX_COMMAND_NOPOLL
, &ha
->flags
)) {
357 complete(&ha
->mbx_intr_comp
);
358 ql4_printk(KERN_INFO
, ha
, "scsi%ld: %s: Due to fw "
359 "recovery, doing premature completion of "
360 "mbx cmd\n", ha
->host_no
, __func__
);
363 set_bit(AF_MBOX_COMMAND_DONE
, &ha
->flags
);
364 ql4_printk(KERN_INFO
, ha
, "scsi%ld: %s: Due to fw "
365 "recovery, doing premature completion of "
366 "polling mbx cmd\n", ha
->host_no
, __func__
);
372 qla4xxx_set_ifcb(struct scsi_qla_host
*ha
, uint32_t *mbox_cmd
,
373 uint32_t *mbox_sts
, dma_addr_t init_fw_cb_dma
)
375 memset(mbox_cmd
, 0, sizeof(mbox_cmd
[0]) * MBOX_REG_COUNT
);
376 memset(mbox_sts
, 0, sizeof(mbox_sts
[0]) * MBOX_REG_COUNT
);
379 qla4_82xx_wr_32(ha
, ha
->nx_db_wr_ptr
, 0);
381 mbox_cmd
[0] = MBOX_CMD_INITIALIZE_FIRMWARE
;
383 mbox_cmd
[2] = LSDW(init_fw_cb_dma
);
384 mbox_cmd
[3] = MSDW(init_fw_cb_dma
);
385 mbox_cmd
[4] = sizeof(struct addr_ctrl_blk
);
387 if (qla4xxx_mailbox_command(ha
, 6, 6, mbox_cmd
, mbox_sts
) !=
389 DEBUG2(printk(KERN_WARNING
"scsi%ld: %s: "
390 "MBOX_CMD_INITIALIZE_FIRMWARE"
391 " failed w/ status %04X\n",
392 ha
->host_no
, __func__
, mbox_sts
[0]));
399 qla4xxx_get_ifcb(struct scsi_qla_host
*ha
, uint32_t *mbox_cmd
,
400 uint32_t *mbox_sts
, dma_addr_t init_fw_cb_dma
)
402 memset(mbox_cmd
, 0, sizeof(mbox_cmd
[0]) * MBOX_REG_COUNT
);
403 memset(mbox_sts
, 0, sizeof(mbox_sts
[0]) * MBOX_REG_COUNT
);
404 mbox_cmd
[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK
;
405 mbox_cmd
[2] = LSDW(init_fw_cb_dma
);
406 mbox_cmd
[3] = MSDW(init_fw_cb_dma
);
407 mbox_cmd
[4] = sizeof(struct addr_ctrl_blk
);
409 if (qla4xxx_mailbox_command(ha
, 5, 5, mbox_cmd
, mbox_sts
) !=
411 DEBUG2(printk(KERN_WARNING
"scsi%ld: %s: "
412 "MBOX_CMD_GET_INIT_FW_CTRL_BLOCK"
413 " failed w/ status %04X\n",
414 ha
->host_no
, __func__
, mbox_sts
[0]));
420 uint8_t qla4xxx_set_ipaddr_state(uint8_t fw_ipaddr_state
)
422 uint8_t ipaddr_state
;
424 switch (fw_ipaddr_state
) {
425 case IP_ADDRSTATE_UNCONFIGURED
:
426 ipaddr_state
= ISCSI_IPDDRESS_STATE_UNCONFIGURED
;
428 case IP_ADDRSTATE_INVALID
:
429 ipaddr_state
= ISCSI_IPDDRESS_STATE_INVALID
;
431 case IP_ADDRSTATE_ACQUIRING
:
432 ipaddr_state
= ISCSI_IPDDRESS_STATE_ACQUIRING
;
434 case IP_ADDRSTATE_TENTATIVE
:
435 ipaddr_state
= ISCSI_IPDDRESS_STATE_TENTATIVE
;
437 case IP_ADDRSTATE_DEPRICATED
:
438 ipaddr_state
= ISCSI_IPDDRESS_STATE_DEPRECATED
;
440 case IP_ADDRSTATE_PREFERRED
:
441 ipaddr_state
= ISCSI_IPDDRESS_STATE_VALID
;
443 case IP_ADDRSTATE_DISABLING
:
444 ipaddr_state
= ISCSI_IPDDRESS_STATE_DISABLING
;
447 ipaddr_state
= ISCSI_IPDDRESS_STATE_UNCONFIGURED
;
453 qla4xxx_update_local_ip(struct scsi_qla_host
*ha
,
454 struct addr_ctrl_blk
*init_fw_cb
)
456 ha
->ip_config
.tcp_options
= le16_to_cpu(init_fw_cb
->ipv4_tcp_opts
);
457 ha
->ip_config
.ipv4_options
= le16_to_cpu(init_fw_cb
->ipv4_ip_opts
);
458 ha
->ip_config
.ipv4_addr_state
=
459 qla4xxx_set_ipaddr_state(init_fw_cb
->ipv4_addr_state
);
460 ha
->ip_config
.eth_mtu_size
=
461 le16_to_cpu(init_fw_cb
->eth_mtu_size
);
462 ha
->ip_config
.ipv4_port
= le16_to_cpu(init_fw_cb
->ipv4_port
);
464 if (ha
->acb_version
== ACB_SUPPORTED
) {
465 ha
->ip_config
.ipv6_options
= le16_to_cpu(init_fw_cb
->ipv6_opts
);
466 ha
->ip_config
.ipv6_addl_options
=
467 le16_to_cpu(init_fw_cb
->ipv6_addtl_opts
);
468 ha
->ip_config
.ipv6_tcp_options
=
469 le16_to_cpu(init_fw_cb
->ipv6_tcp_opts
);
472 /* Save IPv4 Address Info */
473 memcpy(ha
->ip_config
.ip_address
, init_fw_cb
->ipv4_addr
,
474 min(sizeof(ha
->ip_config
.ip_address
),
475 sizeof(init_fw_cb
->ipv4_addr
)));
476 memcpy(ha
->ip_config
.subnet_mask
, init_fw_cb
->ipv4_subnet
,
477 min(sizeof(ha
->ip_config
.subnet_mask
),
478 sizeof(init_fw_cb
->ipv4_subnet
)));
479 memcpy(ha
->ip_config
.gateway
, init_fw_cb
->ipv4_gw_addr
,
480 min(sizeof(ha
->ip_config
.gateway
),
481 sizeof(init_fw_cb
->ipv4_gw_addr
)));
483 ha
->ip_config
.ipv4_vlan_tag
= be16_to_cpu(init_fw_cb
->ipv4_vlan_tag
);
484 ha
->ip_config
.control
= init_fw_cb
->control
;
485 ha
->ip_config
.tcp_wsf
= init_fw_cb
->ipv4_tcp_wsf
;
486 ha
->ip_config
.ipv4_tos
= init_fw_cb
->ipv4_tos
;
487 ha
->ip_config
.ipv4_cache_id
= init_fw_cb
->ipv4_cacheid
;
488 ha
->ip_config
.ipv4_alt_cid_len
= init_fw_cb
->ipv4_dhcp_alt_cid_len
;
489 memcpy(ha
->ip_config
.ipv4_alt_cid
, init_fw_cb
->ipv4_dhcp_alt_cid
,
490 min(sizeof(ha
->ip_config
.ipv4_alt_cid
),
491 sizeof(init_fw_cb
->ipv4_dhcp_alt_cid
)));
492 ha
->ip_config
.ipv4_vid_len
= init_fw_cb
->ipv4_dhcp_vid_len
;
493 memcpy(ha
->ip_config
.ipv4_vid
, init_fw_cb
->ipv4_dhcp_vid
,
494 min(sizeof(ha
->ip_config
.ipv4_vid
),
495 sizeof(init_fw_cb
->ipv4_dhcp_vid
)));
496 ha
->ip_config
.ipv4_ttl
= init_fw_cb
->ipv4_ttl
;
497 ha
->ip_config
.def_timeout
= le16_to_cpu(init_fw_cb
->def_timeout
);
498 ha
->ip_config
.abort_timer
= init_fw_cb
->abort_timer
;
499 ha
->ip_config
.iscsi_options
= le16_to_cpu(init_fw_cb
->iscsi_opts
);
500 ha
->ip_config
.iscsi_max_pdu_size
=
501 le16_to_cpu(init_fw_cb
->iscsi_max_pdu_size
);
502 ha
->ip_config
.iscsi_first_burst_len
=
503 le16_to_cpu(init_fw_cb
->iscsi_fburst_len
);
504 ha
->ip_config
.iscsi_max_outstnd_r2t
=
505 le16_to_cpu(init_fw_cb
->iscsi_max_outstnd_r2t
);
506 ha
->ip_config
.iscsi_max_burst_len
=
507 le16_to_cpu(init_fw_cb
->iscsi_max_burst_len
);
508 memcpy(ha
->ip_config
.iscsi_name
, init_fw_cb
->iscsi_name
,
509 min(sizeof(ha
->ip_config
.iscsi_name
),
510 sizeof(init_fw_cb
->iscsi_name
)));
512 if (is_ipv6_enabled(ha
)) {
513 /* Save IPv6 Address */
514 ha
->ip_config
.ipv6_link_local_state
=
515 qla4xxx_set_ipaddr_state(init_fw_cb
->ipv6_lnk_lcl_addr_state
);
516 ha
->ip_config
.ipv6_addr0_state
=
517 qla4xxx_set_ipaddr_state(init_fw_cb
->ipv6_addr0_state
);
518 ha
->ip_config
.ipv6_addr1_state
=
519 qla4xxx_set_ipaddr_state(init_fw_cb
->ipv6_addr1_state
);
521 switch (le16_to_cpu(init_fw_cb
->ipv6_dflt_rtr_state
)) {
522 case IPV6_RTRSTATE_UNKNOWN
:
523 ha
->ip_config
.ipv6_default_router_state
=
524 ISCSI_ROUTER_STATE_UNKNOWN
;
526 case IPV6_RTRSTATE_MANUAL
:
527 ha
->ip_config
.ipv6_default_router_state
=
528 ISCSI_ROUTER_STATE_MANUAL
;
530 case IPV6_RTRSTATE_ADVERTISED
:
531 ha
->ip_config
.ipv6_default_router_state
=
532 ISCSI_ROUTER_STATE_ADVERTISED
;
534 case IPV6_RTRSTATE_STALE
:
535 ha
->ip_config
.ipv6_default_router_state
=
536 ISCSI_ROUTER_STATE_STALE
;
539 ha
->ip_config
.ipv6_default_router_state
=
540 ISCSI_ROUTER_STATE_UNKNOWN
;
543 ha
->ip_config
.ipv6_link_local_addr
.in6_u
.u6_addr8
[0] = 0xFE;
544 ha
->ip_config
.ipv6_link_local_addr
.in6_u
.u6_addr8
[1] = 0x80;
546 memcpy(&ha
->ip_config
.ipv6_link_local_addr
.in6_u
.u6_addr8
[8],
547 init_fw_cb
->ipv6_if_id
,
548 min(sizeof(ha
->ip_config
.ipv6_link_local_addr
)/2,
549 sizeof(init_fw_cb
->ipv6_if_id
)));
550 memcpy(&ha
->ip_config
.ipv6_addr0
, init_fw_cb
->ipv6_addr0
,
551 min(sizeof(ha
->ip_config
.ipv6_addr0
),
552 sizeof(init_fw_cb
->ipv6_addr0
)));
553 memcpy(&ha
->ip_config
.ipv6_addr1
, init_fw_cb
->ipv6_addr1
,
554 min(sizeof(ha
->ip_config
.ipv6_addr1
),
555 sizeof(init_fw_cb
->ipv6_addr1
)));
556 memcpy(&ha
->ip_config
.ipv6_default_router_addr
,
557 init_fw_cb
->ipv6_dflt_rtr_addr
,
558 min(sizeof(ha
->ip_config
.ipv6_default_router_addr
),
559 sizeof(init_fw_cb
->ipv6_dflt_rtr_addr
)));
560 ha
->ip_config
.ipv6_vlan_tag
=
561 be16_to_cpu(init_fw_cb
->ipv6_vlan_tag
);
562 ha
->ip_config
.ipv6_port
= le16_to_cpu(init_fw_cb
->ipv6_port
);
563 ha
->ip_config
.ipv6_cache_id
= init_fw_cb
->ipv6_cache_id
;
564 ha
->ip_config
.ipv6_flow_lbl
=
565 le16_to_cpu(init_fw_cb
->ipv6_flow_lbl
);
566 ha
->ip_config
.ipv6_traffic_class
=
567 init_fw_cb
->ipv6_traffic_class
;
568 ha
->ip_config
.ipv6_hop_limit
= init_fw_cb
->ipv6_hop_limit
;
569 ha
->ip_config
.ipv6_nd_reach_time
=
570 le32_to_cpu(init_fw_cb
->ipv6_nd_reach_time
);
571 ha
->ip_config
.ipv6_nd_rexmit_timer
=
572 le32_to_cpu(init_fw_cb
->ipv6_nd_rexmit_timer
);
573 ha
->ip_config
.ipv6_nd_stale_timeout
=
574 le32_to_cpu(init_fw_cb
->ipv6_nd_stale_timeout
);
575 ha
->ip_config
.ipv6_dup_addr_detect_count
=
576 init_fw_cb
->ipv6_dup_addr_detect_count
;
577 ha
->ip_config
.ipv6_gw_advrt_mtu
=
578 le32_to_cpu(init_fw_cb
->ipv6_gw_advrt_mtu
);
579 ha
->ip_config
.ipv6_tcp_wsf
= init_fw_cb
->ipv6_tcp_wsf
;
584 qla4xxx_update_local_ifcb(struct scsi_qla_host
*ha
,
587 struct addr_ctrl_blk
*init_fw_cb
,
588 dma_addr_t init_fw_cb_dma
)
590 if (qla4xxx_get_ifcb(ha
, mbox_cmd
, mbox_sts
, init_fw_cb_dma
)
592 DEBUG2(printk(KERN_WARNING
593 "scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
594 ha
->host_no
, __func__
));
598 DEBUG2(qla4xxx_dump_buffer(init_fw_cb
, sizeof(struct addr_ctrl_blk
)));
600 /* Save some info in adapter structure. */
601 ha
->acb_version
= init_fw_cb
->acb_version
;
602 ha
->firmware_options
= le16_to_cpu(init_fw_cb
->fw_options
);
603 ha
->heartbeat_interval
= init_fw_cb
->hb_interval
;
604 memcpy(ha
->name_string
, init_fw_cb
->iscsi_name
,
605 min(sizeof(ha
->name_string
),
606 sizeof(init_fw_cb
->iscsi_name
)));
607 ha
->def_timeout
= le16_to_cpu(init_fw_cb
->def_timeout
);
608 /*memcpy(ha->alias, init_fw_cb->Alias,
609 min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
611 qla4xxx_update_local_ip(ha
, init_fw_cb
);
617 * qla4xxx_initialize_fw_cb - initializes firmware control block.
618 * @ha: Pointer to host adapter structure.
620 int qla4xxx_initialize_fw_cb(struct scsi_qla_host
* ha
)
622 struct addr_ctrl_blk
*init_fw_cb
;
623 dma_addr_t init_fw_cb_dma
;
624 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
625 uint32_t mbox_sts
[MBOX_REG_COUNT
];
626 int status
= QLA_ERROR
;
628 init_fw_cb
= dma_alloc_coherent(&ha
->pdev
->dev
,
629 sizeof(struct addr_ctrl_blk
),
630 &init_fw_cb_dma
, GFP_KERNEL
);
631 if (init_fw_cb
== NULL
) {
632 DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
633 ha
->host_no
, __func__
));
634 goto exit_init_fw_cb_no_free
;
637 /* Get Initialize Firmware Control Block. */
638 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
639 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
641 if (qla4xxx_get_ifcb(ha
, &mbox_cmd
[0], &mbox_sts
[0], init_fw_cb_dma
) !=
643 goto exit_init_fw_cb
;
646 /* Fill in the request and response queue information. */
647 init_fw_cb
->rqq_consumer_idx
= cpu_to_le16(ha
->request_out
);
648 init_fw_cb
->compq_producer_idx
= cpu_to_le16(ha
->response_in
);
649 init_fw_cb
->rqq_len
= __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH
);
650 init_fw_cb
->compq_len
= __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH
);
651 init_fw_cb
->rqq_addr_lo
= cpu_to_le32(LSDW(ha
->request_dma
));
652 init_fw_cb
->rqq_addr_hi
= cpu_to_le32(MSDW(ha
->request_dma
));
653 init_fw_cb
->compq_addr_lo
= cpu_to_le32(LSDW(ha
->response_dma
));
654 init_fw_cb
->compq_addr_hi
= cpu_to_le32(MSDW(ha
->response_dma
));
655 init_fw_cb
->shdwreg_addr_lo
= cpu_to_le32(LSDW(ha
->shadow_regs_dma
));
656 init_fw_cb
->shdwreg_addr_hi
= cpu_to_le32(MSDW(ha
->shadow_regs_dma
));
658 /* Set up required options. */
659 init_fw_cb
->fw_options
|=
660 __constant_cpu_to_le16(FWOPT_SESSION_MODE
|
661 FWOPT_INITIATOR_MODE
);
664 init_fw_cb
->fw_options
|=
665 __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB
);
667 init_fw_cb
->fw_options
&= __constant_cpu_to_le16(~FWOPT_TARGET_MODE
);
669 init_fw_cb
->add_fw_options
= 0;
670 init_fw_cb
->add_fw_options
|=
671 __constant_cpu_to_le16(ADFWOPT_SERIALIZE_TASK_MGMT
);
672 init_fw_cb
->add_fw_options
|=
673 __constant_cpu_to_le16(ADFWOPT_AUTOCONN_DISABLE
);
675 if (qla4xxx_set_ifcb(ha
, &mbox_cmd
[0], &mbox_sts
[0], init_fw_cb_dma
)
677 DEBUG2(printk(KERN_WARNING
678 "scsi%ld: %s: Failed to set init_fw_ctrl_blk\n",
679 ha
->host_no
, __func__
));
680 goto exit_init_fw_cb
;
683 if (qla4xxx_update_local_ifcb(ha
, &mbox_cmd
[0], &mbox_sts
[0],
684 init_fw_cb
, init_fw_cb_dma
) != QLA_SUCCESS
) {
685 DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n",
686 ha
->host_no
, __func__
));
687 goto exit_init_fw_cb
;
689 status
= QLA_SUCCESS
;
692 dma_free_coherent(&ha
->pdev
->dev
, sizeof(struct addr_ctrl_blk
),
693 init_fw_cb
, init_fw_cb_dma
);
694 exit_init_fw_cb_no_free
:
699 * qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP
700 * @ha: Pointer to host adapter structure.
702 int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host
* ha
)
704 struct addr_ctrl_blk
*init_fw_cb
;
705 dma_addr_t init_fw_cb_dma
;
706 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
707 uint32_t mbox_sts
[MBOX_REG_COUNT
];
709 init_fw_cb
= dma_alloc_coherent(&ha
->pdev
->dev
,
710 sizeof(struct addr_ctrl_blk
),
711 &init_fw_cb_dma
, GFP_KERNEL
);
712 if (init_fw_cb
== NULL
) {
713 printk("scsi%ld: %s: Unable to alloc init_cb\n", ha
->host_no
,
718 /* Get Initialize Firmware Control Block. */
719 if (qla4xxx_get_ifcb(ha
, &mbox_cmd
[0], &mbox_sts
[0], init_fw_cb_dma
) !=
721 DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
722 ha
->host_no
, __func__
));
723 dma_free_coherent(&ha
->pdev
->dev
,
724 sizeof(struct addr_ctrl_blk
),
725 init_fw_cb
, init_fw_cb_dma
);
729 /* Save IP Address. */
730 qla4xxx_update_local_ip(ha
, init_fw_cb
);
731 dma_free_coherent(&ha
->pdev
->dev
, sizeof(struct addr_ctrl_blk
),
732 init_fw_cb
, init_fw_cb_dma
);
738 * qla4xxx_get_firmware_state - gets firmware state of HBA
739 * @ha: Pointer to host adapter structure.
741 int qla4xxx_get_firmware_state(struct scsi_qla_host
* ha
)
743 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
744 uint32_t mbox_sts
[MBOX_REG_COUNT
];
746 /* Get firmware version */
747 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
748 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
750 mbox_cmd
[0] = MBOX_CMD_GET_FW_STATE
;
752 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 4, &mbox_cmd
[0], &mbox_sts
[0]) !=
754 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
755 "status %04X\n", ha
->host_no
, __func__
,
759 ha
->firmware_state
= mbox_sts
[1];
760 ha
->board_id
= mbox_sts
[2];
761 ha
->addl_fw_state
= mbox_sts
[3];
762 DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
763 ha
->host_no
, __func__
, ha
->firmware_state
);)
769 * qla4xxx_get_firmware_status - retrieves firmware status
770 * @ha: Pointer to host adapter structure.
772 int qla4xxx_get_firmware_status(struct scsi_qla_host
* ha
)
774 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
775 uint32_t mbox_sts
[MBOX_REG_COUNT
];
777 /* Get firmware version */
778 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
779 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
781 mbox_cmd
[0] = MBOX_CMD_GET_FW_STATUS
;
783 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 3, &mbox_cmd
[0], &mbox_sts
[0]) !=
785 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
786 "status %04X\n", ha
->host_no
, __func__
,
791 /* High-water mark of IOCBs */
792 ha
->iocb_hiwat
= mbox_sts
[2];
793 DEBUG2(ql4_printk(KERN_INFO
, ha
,
794 "%s: firmware IOCBs available = %d\n", __func__
,
797 if (ha
->iocb_hiwat
> IOCB_HIWAT_CUSHION
)
798 ha
->iocb_hiwat
-= IOCB_HIWAT_CUSHION
;
800 /* Ideally, we should not enter this code, as the # of firmware
801 * IOCBs is hard-coded in the firmware. We set a default
802 * iocb_hiwat here just in case */
803 if (ha
->iocb_hiwat
== 0) {
804 ha
->iocb_hiwat
= REQUEST_QUEUE_DEPTH
/ 4;
805 DEBUG2(ql4_printk(KERN_WARNING
, ha
,
806 "%s: Setting IOCB's to = %d\n", __func__
,
814 * qla4xxx_get_fwddb_entry - retrieves firmware ddb entry
815 * @ha: Pointer to host adapter structure.
816 * @fw_ddb_index: Firmware's device database index
817 * @fw_ddb_entry: Pointer to firmware's device database entry structure
818 * @num_valid_ddb_entries: Pointer to number of valid ddb entries
819 * @next_ddb_index: Pointer to next valid device database index
820 * @fw_ddb_device_state: Pointer to device state
822 int qla4xxx_get_fwddb_entry(struct scsi_qla_host
*ha
,
823 uint16_t fw_ddb_index
,
824 struct dev_db_entry
*fw_ddb_entry
,
825 dma_addr_t fw_ddb_entry_dma
,
826 uint32_t *num_valid_ddb_entries
,
827 uint32_t *next_ddb_index
,
828 uint32_t *fw_ddb_device_state
,
829 uint32_t *conn_err_detail
,
830 uint16_t *tcp_source_port_num
,
831 uint16_t *connection_id
)
833 int status
= QLA_ERROR
;
835 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
836 uint32_t mbox_sts
[MBOX_REG_COUNT
];
838 /* Make sure the device index is valid */
839 if (fw_ddb_index
>= MAX_DDB_ENTRIES
) {
840 DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n",
841 ha
->host_no
, __func__
, fw_ddb_index
));
844 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
845 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
847 memset(fw_ddb_entry
, 0, sizeof(struct dev_db_entry
));
849 mbox_cmd
[0] = MBOX_CMD_GET_DATABASE_ENTRY
;
850 mbox_cmd
[1] = (uint32_t) fw_ddb_index
;
851 mbox_cmd
[2] = LSDW(fw_ddb_entry_dma
);
852 mbox_cmd
[3] = MSDW(fw_ddb_entry_dma
);
853 mbox_cmd
[4] = sizeof(struct dev_db_entry
);
855 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 7, &mbox_cmd
[0], &mbox_sts
[0]) ==
857 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
858 " with status 0x%04X\n", ha
->host_no
, __func__
,
862 if (fw_ddb_index
!= mbox_sts
[1]) {
863 DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n",
864 ha
->host_no
, __func__
, fw_ddb_index
,
869 options
= le16_to_cpu(fw_ddb_entry
->options
);
870 if (options
& DDB_OPT_IPV6_DEVICE
) {
871 ql4_printk(KERN_INFO
, ha
, "%s: DDB[%d] MB0 %04x Tot %d "
872 "Next %d State %04x ConnErr %08x %pI6 "
873 ":%04d \"%s\"\n", __func__
, fw_ddb_index
,
874 mbox_sts
[0], mbox_sts
[2], mbox_sts
[3],
875 mbox_sts
[4], mbox_sts
[5],
876 fw_ddb_entry
->ip_addr
,
877 le16_to_cpu(fw_ddb_entry
->port
),
878 fw_ddb_entry
->iscsi_name
);
880 ql4_printk(KERN_INFO
, ha
, "%s: DDB[%d] MB0 %04x Tot %d "
881 "Next %d State %04x ConnErr %08x %pI4 "
882 ":%04d \"%s\"\n", __func__
, fw_ddb_index
,
883 mbox_sts
[0], mbox_sts
[2], mbox_sts
[3],
884 mbox_sts
[4], mbox_sts
[5],
885 fw_ddb_entry
->ip_addr
,
886 le16_to_cpu(fw_ddb_entry
->port
),
887 fw_ddb_entry
->iscsi_name
);
890 if (num_valid_ddb_entries
)
891 *num_valid_ddb_entries
= mbox_sts
[2];
893 *next_ddb_index
= mbox_sts
[3];
894 if (fw_ddb_device_state
)
895 *fw_ddb_device_state
= mbox_sts
[4];
898 * RA: This mailbox has been changed to pass connection error and
899 * details. Its true for ISP4010 as per Version E - Not sure when it
900 * was changed. Get the time2wait from the fw_dd_entry field :
901 * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
905 *conn_err_detail
= mbox_sts
[5];
906 if (tcp_source_port_num
)
907 *tcp_source_port_num
= (uint16_t) (mbox_sts
[6] >> 16);
909 *connection_id
= (uint16_t) mbox_sts
[6] & 0x00FF;
910 status
= QLA_SUCCESS
;
916 int qla4xxx_conn_open(struct scsi_qla_host
*ha
, uint16_t fw_ddb_index
)
918 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
919 uint32_t mbox_sts
[MBOX_REG_COUNT
];
922 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
923 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
925 mbox_cmd
[0] = MBOX_CMD_CONN_OPEN
;
926 mbox_cmd
[1] = fw_ddb_index
;
928 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 2, &mbox_cmd
[0],
930 DEBUG2(ql4_printk(KERN_INFO
, ha
,
931 "%s: status = %d mbx0 = 0x%x mbx1 = 0x%x\n",
932 __func__
, status
, mbox_sts
[0], mbox_sts
[1]));
937 * qla4xxx_set_fwddb_entry - sets a ddb entry.
938 * @ha: Pointer to host adapter structure.
939 * @fw_ddb_index: Firmware's device database index
940 * @fw_ddb_entry_dma: dma address of ddb entry
941 * @mbx_sts: mailbox 0 to be returned or NULL
943 * This routine initializes or updates the adapter's device database
944 * entry for the specified device.
946 int qla4xxx_set_ddb_entry(struct scsi_qla_host
* ha
, uint16_t fw_ddb_index
,
947 dma_addr_t fw_ddb_entry_dma
, uint32_t *mbx_sts
)
949 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
950 uint32_t mbox_sts
[MBOX_REG_COUNT
];
953 /* Do not wait for completion. The firmware will send us an
954 * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
956 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
957 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
959 mbox_cmd
[0] = MBOX_CMD_SET_DATABASE_ENTRY
;
960 mbox_cmd
[1] = (uint32_t) fw_ddb_index
;
961 mbox_cmd
[2] = LSDW(fw_ddb_entry_dma
);
962 mbox_cmd
[3] = MSDW(fw_ddb_entry_dma
);
963 mbox_cmd
[4] = sizeof(struct dev_db_entry
);
965 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 5, &mbox_cmd
[0],
968 *mbx_sts
= mbox_sts
[0];
969 DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n",
970 ha
->host_no
, __func__
, status
, mbox_sts
[0], mbox_sts
[4]);)
975 int qla4xxx_session_logout_ddb(struct scsi_qla_host
*ha
,
976 struct ddb_entry
*ddb_entry
, int options
)
979 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
980 uint32_t mbox_sts
[MBOX_REG_COUNT
];
982 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
983 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
985 mbox_cmd
[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT
;
986 mbox_cmd
[1] = ddb_entry
->fw_ddb_index
;
987 mbox_cmd
[3] = options
;
989 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 2, &mbox_cmd
[0],
991 if (status
!= QLA_SUCCESS
) {
992 DEBUG2(ql4_printk(KERN_INFO
, ha
,
993 "%s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT "
994 "failed sts %04X %04X", __func__
,
995 mbox_sts
[0], mbox_sts
[1]));
996 if ((mbox_sts
[0] == MBOX_STS_COMMAND_ERROR
) &&
997 (mbox_sts
[1] == DDB_NOT_LOGGED_IN
)) {
998 set_bit(DDB_CONN_CLOSE_FAILURE
, &ddb_entry
->flags
);
1006 * qla4xxx_get_crash_record - retrieves crash record.
1007 * @ha: Pointer to host adapter structure.
1009 * This routine retrieves a crash record from the QLA4010 after an 8002h aen.
1011 void qla4xxx_get_crash_record(struct scsi_qla_host
* ha
)
1013 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1014 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1015 struct crash_record
*crash_record
= NULL
;
1016 dma_addr_t crash_record_dma
= 0;
1017 uint32_t crash_record_size
= 0;
1019 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1020 memset(&mbox_sts
, 0, sizeof(mbox_cmd
));
1022 /* Get size of crash record. */
1023 mbox_cmd
[0] = MBOX_CMD_GET_CRASH_RECORD
;
1025 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 5, &mbox_cmd
[0], &mbox_sts
[0]) !=
1027 DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
1028 ha
->host_no
, __func__
));
1029 goto exit_get_crash_record
;
1031 crash_record_size
= mbox_sts
[4];
1032 if (crash_record_size
== 0) {
1033 DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
1034 ha
->host_no
, __func__
));
1035 goto exit_get_crash_record
;
1038 /* Alloc Memory for Crash Record. */
1039 crash_record
= dma_alloc_coherent(&ha
->pdev
->dev
, crash_record_size
,
1040 &crash_record_dma
, GFP_KERNEL
);
1041 if (crash_record
== NULL
)
1042 goto exit_get_crash_record
;
1044 /* Get Crash Record. */
1045 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1046 memset(&mbox_sts
, 0, sizeof(mbox_cmd
));
1048 mbox_cmd
[0] = MBOX_CMD_GET_CRASH_RECORD
;
1049 mbox_cmd
[2] = LSDW(crash_record_dma
);
1050 mbox_cmd
[3] = MSDW(crash_record_dma
);
1051 mbox_cmd
[4] = crash_record_size
;
1053 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 5, &mbox_cmd
[0], &mbox_sts
[0]) !=
1055 goto exit_get_crash_record
;
1057 /* Dump Crash Record. */
1059 exit_get_crash_record
:
1061 dma_free_coherent(&ha
->pdev
->dev
, crash_record_size
,
1062 crash_record
, crash_record_dma
);
1066 * qla4xxx_get_conn_event_log - retrieves connection event log
1067 * @ha: Pointer to host adapter structure.
1069 void qla4xxx_get_conn_event_log(struct scsi_qla_host
* ha
)
1071 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1072 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1073 struct conn_event_log_entry
*event_log
= NULL
;
1074 dma_addr_t event_log_dma
= 0;
1075 uint32_t event_log_size
= 0;
1076 uint32_t num_valid_entries
;
1077 uint32_t oldest_entry
= 0;
1078 uint32_t max_event_log_entries
;
1081 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1082 memset(&mbox_sts
, 0, sizeof(mbox_cmd
));
1084 /* Get size of crash record. */
1085 mbox_cmd
[0] = MBOX_CMD_GET_CONN_EVENT_LOG
;
1087 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 5, &mbox_cmd
[0], &mbox_sts
[0]) !=
1089 goto exit_get_event_log
;
1091 event_log_size
= mbox_sts
[4];
1092 if (event_log_size
== 0)
1093 goto exit_get_event_log
;
1095 /* Alloc Memory for Crash Record. */
1096 event_log
= dma_alloc_coherent(&ha
->pdev
->dev
, event_log_size
,
1097 &event_log_dma
, GFP_KERNEL
);
1098 if (event_log
== NULL
)
1099 goto exit_get_event_log
;
1101 /* Get Crash Record. */
1102 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1103 memset(&mbox_sts
, 0, sizeof(mbox_cmd
));
1105 mbox_cmd
[0] = MBOX_CMD_GET_CONN_EVENT_LOG
;
1106 mbox_cmd
[2] = LSDW(event_log_dma
);
1107 mbox_cmd
[3] = MSDW(event_log_dma
);
1109 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 5, &mbox_cmd
[0], &mbox_sts
[0]) !=
1111 DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
1112 "log!\n", ha
->host_no
, __func__
));
1113 goto exit_get_event_log
;
1116 /* Dump Event Log. */
1117 num_valid_entries
= mbox_sts
[1];
1119 max_event_log_entries
= event_log_size
/
1120 sizeof(struct conn_event_log_entry
);
1122 if (num_valid_entries
> max_event_log_entries
)
1123 oldest_entry
= num_valid_entries
% max_event_log_entries
;
1125 DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
1126 ha
->host_no
, num_valid_entries
));
1128 if (ql4xextended_error_logging
== 3) {
1129 if (oldest_entry
== 0) {
1130 /* Circular Buffer has not wrapped around */
1131 for (i
=0; i
< num_valid_entries
; i
++) {
1132 qla4xxx_dump_buffer((uint8_t *)event_log
+
1133 (i
*sizeof(*event_log
)),
1134 sizeof(*event_log
));
1138 /* Circular Buffer has wrapped around -
1139 * display accordingly*/
1140 for (i
=oldest_entry
; i
< max_event_log_entries
; i
++) {
1141 qla4xxx_dump_buffer((uint8_t *)event_log
+
1142 (i
*sizeof(*event_log
)),
1143 sizeof(*event_log
));
1145 for (i
=0; i
< oldest_entry
; i
++) {
1146 qla4xxx_dump_buffer((uint8_t *)event_log
+
1147 (i
*sizeof(*event_log
)),
1148 sizeof(*event_log
));
1155 dma_free_coherent(&ha
->pdev
->dev
, event_log_size
, event_log
,
1160 * qla4xxx_abort_task - issues Abort Task
1161 * @ha: Pointer to host adapter structure.
1162 * @srb: Pointer to srb entry
1164 * This routine performs a LUN RESET on the specified target/lun.
1165 * The caller must ensure that the ddb_entry and lun_entry pointers
1166 * are valid before calling this routine.
1168 int qla4xxx_abort_task(struct scsi_qla_host
*ha
, struct srb
*srb
)
1170 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1171 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1172 struct scsi_cmnd
*cmd
= srb
->cmd
;
1173 int status
= QLA_SUCCESS
;
1174 unsigned long flags
= 0;
1178 * Send abort task command to ISP, so that the ISP will return
1179 * request with ABORT status
1181 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1182 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1184 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
1185 index
= (unsigned long)(unsigned char *)cmd
->host_scribble
;
1186 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
1188 /* Firmware already posted completion on response queue */
1189 if (index
== MAX_SRBS
)
1192 mbox_cmd
[0] = MBOX_CMD_ABORT_TASK
;
1193 mbox_cmd
[1] = srb
->ddb
->fw_ddb_index
;
1194 mbox_cmd
[2] = index
;
1195 /* Immediate Command Enable */
1198 qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 5, &mbox_cmd
[0],
1200 if (mbox_sts
[0] != MBOX_STS_COMMAND_COMPLETE
) {
1203 DEBUG2(printk(KERN_WARNING
"scsi%ld:%d:%llu: abort task FAILED: "
1204 "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n",
1205 ha
->host_no
, cmd
->device
->id
, cmd
->device
->lun
, mbox_sts
[0],
1206 mbox_sts
[1], mbox_sts
[2], mbox_sts
[3], mbox_sts
[4]));
1213 * qla4xxx_reset_lun - issues LUN Reset
1214 * @ha: Pointer to host adapter structure.
1215 * @ddb_entry: Pointer to device database entry
1218 * This routine performs a LUN RESET on the specified target/lun.
1219 * The caller must ensure that the ddb_entry and lun_entry pointers
1220 * are valid before calling this routine.
1222 int qla4xxx_reset_lun(struct scsi_qla_host
* ha
, struct ddb_entry
* ddb_entry
,
1225 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1226 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1227 uint32_t scsi_lun
[2];
1228 int status
= QLA_SUCCESS
;
1230 DEBUG2(printk("scsi%ld:%d:%llu: lun reset issued\n", ha
->host_no
,
1231 ddb_entry
->fw_ddb_index
, lun
));
1234 * Send lun reset command to ISP, so that the ISP will return all
1235 * outstanding requests with RESET status
1237 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1238 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1239 int_to_scsilun(lun
, (struct scsi_lun
*) scsi_lun
);
1241 mbox_cmd
[0] = MBOX_CMD_LUN_RESET
;
1242 mbox_cmd
[1] = ddb_entry
->fw_ddb_index
;
1243 /* FW expects LUN bytes 0-3 in Incoming Mailbox 2
1244 * (LUN byte 0 is LSByte, byte 3 is MSByte) */
1245 mbox_cmd
[2] = cpu_to_le32(scsi_lun
[0]);
1246 /* FW expects LUN bytes 4-7 in Incoming Mailbox 3
1247 * (LUN byte 4 is LSByte, byte 7 is MSByte) */
1248 mbox_cmd
[3] = cpu_to_le32(scsi_lun
[1]);
1249 mbox_cmd
[5] = 0x01; /* Immediate Command Enable */
1251 qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 1, &mbox_cmd
[0], &mbox_sts
[0]);
1252 if (mbox_sts
[0] != MBOX_STS_COMMAND_COMPLETE
&&
1253 mbox_sts
[0] != MBOX_STS_COMMAND_ERROR
)
1260 * qla4xxx_reset_target - issues target Reset
1261 * @ha: Pointer to host adapter structure.
1262 * @db_entry: Pointer to device database entry
1263 * @un_entry: Pointer to lun entry structure
1265 * This routine performs a TARGET RESET on the specified target.
1266 * The caller must ensure that the ddb_entry pointers
1267 * are valid before calling this routine.
1269 int qla4xxx_reset_target(struct scsi_qla_host
*ha
,
1270 struct ddb_entry
*ddb_entry
)
1272 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1273 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1274 int status
= QLA_SUCCESS
;
1276 DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha
->host_no
,
1277 ddb_entry
->fw_ddb_index
));
1280 * Send target reset command to ISP, so that the ISP will return all
1281 * outstanding requests with RESET status
1283 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1284 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1286 mbox_cmd
[0] = MBOX_CMD_TARGET_WARM_RESET
;
1287 mbox_cmd
[1] = ddb_entry
->fw_ddb_index
;
1288 mbox_cmd
[5] = 0x01; /* Immediate Command Enable */
1290 qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 1, &mbox_cmd
[0],
1292 if (mbox_sts
[0] != MBOX_STS_COMMAND_COMPLETE
&&
1293 mbox_sts
[0] != MBOX_STS_COMMAND_ERROR
)
1299 int qla4xxx_get_flash(struct scsi_qla_host
* ha
, dma_addr_t dma_addr
,
1300 uint32_t offset
, uint32_t len
)
1302 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1303 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1305 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1306 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1308 mbox_cmd
[0] = MBOX_CMD_READ_FLASH
;
1309 mbox_cmd
[1] = LSDW(dma_addr
);
1310 mbox_cmd
[2] = MSDW(dma_addr
);
1311 mbox_cmd
[3] = offset
;
1314 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 2, &mbox_cmd
[0], &mbox_sts
[0]) !=
1316 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
1317 "status %04X %04X, offset %08x, len %08x\n", ha
->host_no
,
1318 __func__
, mbox_sts
[0], mbox_sts
[1], offset
, len
));
1325 * qla4xxx_about_firmware - gets FW, iscsi draft and boot loader version
1326 * @ha: Pointer to host adapter structure.
1328 * Retrieves the FW version, iSCSI draft version & bootloader version of HBA.
1329 * Mailboxes 2 & 3 may hold an address for data. Make sure that we write 0 to
1330 * those mailboxes, if unused.
1332 int qla4xxx_about_firmware(struct scsi_qla_host
*ha
)
1334 struct about_fw_info
*about_fw
= NULL
;
1335 dma_addr_t about_fw_dma
;
1336 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1337 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1338 int status
= QLA_ERROR
;
1340 about_fw
= dma_alloc_coherent(&ha
->pdev
->dev
,
1341 sizeof(struct about_fw_info
),
1342 &about_fw_dma
, GFP_KERNEL
);
1344 DEBUG2(ql4_printk(KERN_ERR
, ha
, "%s: Unable to alloc memory "
1345 "for about_fw\n", __func__
));
1349 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1350 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1352 mbox_cmd
[0] = MBOX_CMD_ABOUT_FW
;
1353 mbox_cmd
[2] = LSDW(about_fw_dma
);
1354 mbox_cmd
[3] = MSDW(about_fw_dma
);
1355 mbox_cmd
[4] = sizeof(struct about_fw_info
);
1357 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, MBOX_REG_COUNT
,
1358 &mbox_cmd
[0], &mbox_sts
[0]);
1359 if (status
!= QLA_SUCCESS
) {
1360 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: MBOX_CMD_ABOUT_FW "
1361 "failed w/ status %04X\n", __func__
,
1366 /* Save version information. */
1367 ha
->fw_info
.fw_major
= le16_to_cpu(about_fw
->fw_major
);
1368 ha
->fw_info
.fw_minor
= le16_to_cpu(about_fw
->fw_minor
);
1369 ha
->fw_info
.fw_patch
= le16_to_cpu(about_fw
->fw_patch
);
1370 ha
->fw_info
.fw_build
= le16_to_cpu(about_fw
->fw_build
);
1371 memcpy(ha
->fw_info
.fw_build_date
, about_fw
->fw_build_date
,
1372 sizeof(about_fw
->fw_build_date
));
1373 memcpy(ha
->fw_info
.fw_build_time
, about_fw
->fw_build_time
,
1374 sizeof(about_fw
->fw_build_time
));
1375 strcpy((char *)ha
->fw_info
.fw_build_user
,
1376 skip_spaces((char *)about_fw
->fw_build_user
));
1377 ha
->fw_info
.fw_load_source
= le16_to_cpu(about_fw
->fw_load_source
);
1378 ha
->fw_info
.iscsi_major
= le16_to_cpu(about_fw
->iscsi_major
);
1379 ha
->fw_info
.iscsi_minor
= le16_to_cpu(about_fw
->iscsi_minor
);
1380 ha
->fw_info
.bootload_major
= le16_to_cpu(about_fw
->bootload_major
);
1381 ha
->fw_info
.bootload_minor
= le16_to_cpu(about_fw
->bootload_minor
);
1382 ha
->fw_info
.bootload_patch
= le16_to_cpu(about_fw
->bootload_patch
);
1383 ha
->fw_info
.bootload_build
= le16_to_cpu(about_fw
->bootload_build
);
1384 strcpy((char *)ha
->fw_info
.extended_timestamp
,
1385 skip_spaces((char *)about_fw
->extended_timestamp
));
1387 ha
->fw_uptime_secs
= le32_to_cpu(mbox_sts
[5]);
1388 ha
->fw_uptime_msecs
= le32_to_cpu(mbox_sts
[6]);
1389 status
= QLA_SUCCESS
;
1392 dma_free_coherent(&ha
->pdev
->dev
, sizeof(struct about_fw_info
),
1393 about_fw
, about_fw_dma
);
1397 int qla4xxx_get_default_ddb(struct scsi_qla_host
*ha
, uint32_t options
,
1398 dma_addr_t dma_addr
)
1400 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1401 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1403 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1404 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1406 mbox_cmd
[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS
;
1407 mbox_cmd
[1] = options
;
1408 mbox_cmd
[2] = LSDW(dma_addr
);
1409 mbox_cmd
[3] = MSDW(dma_addr
);
1411 if (qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 1, &mbox_cmd
[0], &mbox_sts
[0]) !=
1413 DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
1414 ha
->host_no
, __func__
, mbox_sts
[0]));
1420 int qla4xxx_req_ddb_entry(struct scsi_qla_host
*ha
, uint32_t ddb_index
,
1424 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1425 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1427 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1428 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1430 mbox_cmd
[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY
;
1431 mbox_cmd
[1] = ddb_index
;
1433 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 1, &mbox_cmd
[0],
1435 if (status
!= QLA_SUCCESS
) {
1436 DEBUG2(ql4_printk(KERN_ERR
, ha
, "%s: failed status %04X\n",
1437 __func__
, mbox_sts
[0]));
1440 *mbx_sts
= mbox_sts
[0];
1444 int qla4xxx_clear_ddb_entry(struct scsi_qla_host
*ha
, uint32_t ddb_index
)
1447 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1448 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1450 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1451 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1453 mbox_cmd
[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY
;
1454 mbox_cmd
[1] = ddb_index
;
1456 status
= qla4xxx_mailbox_command(ha
, 2, 1, &mbox_cmd
[0],
1458 if (status
!= QLA_SUCCESS
) {
1459 DEBUG2(ql4_printk(KERN_ERR
, ha
, "%s: failed status %04X\n",
1460 __func__
, mbox_sts
[0]));
1466 int qla4xxx_set_flash(struct scsi_qla_host
*ha
, dma_addr_t dma_addr
,
1467 uint32_t offset
, uint32_t length
, uint32_t options
)
1469 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1470 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1471 int status
= QLA_SUCCESS
;
1473 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1474 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1476 mbox_cmd
[0] = MBOX_CMD_WRITE_FLASH
;
1477 mbox_cmd
[1] = LSDW(dma_addr
);
1478 mbox_cmd
[2] = MSDW(dma_addr
);
1479 mbox_cmd
[3] = offset
;
1480 mbox_cmd
[4] = length
;
1481 mbox_cmd
[5] = options
;
1483 status
= qla4xxx_mailbox_command(ha
, 6, 2, &mbox_cmd
[0], &mbox_sts
[0]);
1484 if (status
!= QLA_SUCCESS
) {
1485 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: MBOX_CMD_WRITE_FLASH "
1486 "failed w/ status %04X, mbx1 %04X\n",
1487 __func__
, mbox_sts
[0], mbox_sts
[1]));
1492 int qla4xxx_bootdb_by_index(struct scsi_qla_host
*ha
,
1493 struct dev_db_entry
*fw_ddb_entry
,
1494 dma_addr_t fw_ddb_entry_dma
, uint16_t ddb_index
)
1496 uint32_t dev_db_start_offset
= FLASH_OFFSET_DB_INFO
;
1497 uint32_t dev_db_end_offset
;
1498 int status
= QLA_ERROR
;
1500 memset(fw_ddb_entry
, 0, sizeof(*fw_ddb_entry
));
1502 dev_db_start_offset
+= (ddb_index
* sizeof(*fw_ddb_entry
));
1503 dev_db_end_offset
= FLASH_OFFSET_DB_END
;
1505 if (dev_db_start_offset
> dev_db_end_offset
) {
1506 DEBUG2(ql4_printk(KERN_ERR
, ha
,
1507 "%s:Invalid DDB index %d", __func__
,
1509 goto exit_bootdb_failed
;
1512 if (qla4xxx_get_flash(ha
, fw_ddb_entry_dma
, dev_db_start_offset
,
1513 sizeof(*fw_ddb_entry
)) != QLA_SUCCESS
) {
1514 ql4_printk(KERN_ERR
, ha
, "scsi%ld: %s: Get Flash"
1515 "failed\n", ha
->host_no
, __func__
);
1516 goto exit_bootdb_failed
;
1519 if (fw_ddb_entry
->cookie
== DDB_VALID_COOKIE
)
1520 status
= QLA_SUCCESS
;
1526 int qla4xxx_flashdb_by_index(struct scsi_qla_host
*ha
,
1527 struct dev_db_entry
*fw_ddb_entry
,
1528 dma_addr_t fw_ddb_entry_dma
, uint16_t ddb_index
)
1530 uint32_t dev_db_start_offset
;
1531 uint32_t dev_db_end_offset
;
1532 int status
= QLA_ERROR
;
1534 memset(fw_ddb_entry
, 0, sizeof(*fw_ddb_entry
));
1536 if (is_qla40XX(ha
)) {
1537 dev_db_start_offset
= FLASH_OFFSET_DB_INFO
;
1538 dev_db_end_offset
= FLASH_OFFSET_DB_END
;
1540 dev_db_start_offset
= FLASH_RAW_ACCESS_ADDR
+
1541 (ha
->hw
.flt_region_ddb
<< 2);
1542 /* flt_ddb_size is DDB table size for both ports
1543 * so divide it by 2 to calculate the offset for second port
1545 if (ha
->port_num
== 1)
1546 dev_db_start_offset
+= (ha
->hw
.flt_ddb_size
/ 2);
1548 dev_db_end_offset
= dev_db_start_offset
+
1549 (ha
->hw
.flt_ddb_size
/ 2);
1552 dev_db_start_offset
+= (ddb_index
* sizeof(*fw_ddb_entry
));
1554 if (dev_db_start_offset
> dev_db_end_offset
) {
1555 DEBUG2(ql4_printk(KERN_ERR
, ha
,
1556 "%s:Invalid DDB index %d", __func__
,
1558 goto exit_fdb_failed
;
1561 if (qla4xxx_get_flash(ha
, fw_ddb_entry_dma
, dev_db_start_offset
,
1562 sizeof(*fw_ddb_entry
)) != QLA_SUCCESS
) {
1563 ql4_printk(KERN_ERR
, ha
, "scsi%ld: %s: Get Flash failed\n",
1564 ha
->host_no
, __func__
);
1565 goto exit_fdb_failed
;
1568 if (fw_ddb_entry
->cookie
== DDB_VALID_COOKIE
)
1569 status
= QLA_SUCCESS
;
1575 int qla4xxx_get_chap(struct scsi_qla_host
*ha
, char *username
, char *password
,
1579 int rval
= QLA_ERROR
;
1580 uint32_t offset
= 0, chap_size
;
1581 struct ql4_chap_table
*chap_table
;
1582 dma_addr_t chap_dma
;
1584 chap_table
= dma_pool_zalloc(ha
->chap_dma_pool
, GFP_KERNEL
, &chap_dma
);
1585 if (chap_table
== NULL
)
1588 chap_size
= sizeof(struct ql4_chap_table
);
1591 offset
= FLASH_CHAP_OFFSET
| (idx
* chap_size
);
1593 offset
= FLASH_RAW_ACCESS_ADDR
+ (ha
->hw
.flt_region_chap
<< 2);
1594 /* flt_chap_size is CHAP table size for both ports
1595 * so divide it by 2 to calculate the offset for second port
1597 if (ha
->port_num
== 1)
1598 offset
+= (ha
->hw
.flt_chap_size
/ 2);
1599 offset
+= (idx
* chap_size
);
1602 rval
= qla4xxx_get_flash(ha
, chap_dma
, offset
, chap_size
);
1603 if (rval
!= QLA_SUCCESS
) {
1608 DEBUG2(ql4_printk(KERN_INFO
, ha
, "Chap Cookie: x%x\n",
1609 __le16_to_cpu(chap_table
->cookie
)));
1611 if (__le16_to_cpu(chap_table
->cookie
) != CHAP_VALID_COOKIE
) {
1612 ql4_printk(KERN_ERR
, ha
, "No valid chap entry found\n");
1616 strlcpy(password
, chap_table
->secret
, QL4_CHAP_MAX_SECRET_LEN
);
1617 strlcpy(username
, chap_table
->name
, QL4_CHAP_MAX_NAME_LEN
);
1618 chap_table
->cookie
= __constant_cpu_to_le16(CHAP_VALID_COOKIE
);
1621 dma_pool_free(ha
->chap_dma_pool
, chap_table
, chap_dma
);
1626 * qla4xxx_set_chap - Make a chap entry at the given index
1627 * @ha: pointer to adapter structure
1628 * @username: CHAP username to set
1629 * @password: CHAP password to set
1630 * @idx: CHAP index at which to make the entry
1631 * @bidi: type of chap entry (chap_in or chap_out)
1633 * Create chap entry at the given index with the information provided.
1635 * Note: Caller should acquire the chap lock before getting here.
1637 int qla4xxx_set_chap(struct scsi_qla_host
*ha
, char *username
, char *password
,
1638 uint16_t idx
, int bidi
)
1641 int rval
= QLA_ERROR
;
1642 uint32_t offset
= 0;
1643 struct ql4_chap_table
*chap_table
;
1644 uint32_t chap_size
= 0;
1645 dma_addr_t chap_dma
;
1647 chap_table
= dma_pool_zalloc(ha
->chap_dma_pool
, GFP_KERNEL
, &chap_dma
);
1648 if (chap_table
== NULL
) {
1654 chap_table
->flags
|= BIT_6
; /* peer */
1656 chap_table
->flags
|= BIT_7
; /* local */
1657 chap_table
->secret_len
= strlen(password
);
1658 strncpy(chap_table
->secret
, password
, MAX_CHAP_SECRET_LEN
- 1);
1659 strncpy(chap_table
->name
, username
, MAX_CHAP_NAME_LEN
- 1);
1660 chap_table
->cookie
= __constant_cpu_to_le16(CHAP_VALID_COOKIE
);
1662 if (is_qla40XX(ha
)) {
1663 chap_size
= MAX_CHAP_ENTRIES_40XX
* sizeof(*chap_table
);
1664 offset
= FLASH_CHAP_OFFSET
;
1665 } else { /* Single region contains CHAP info for both ports which is
1666 * divided into half for each port.
1668 chap_size
= ha
->hw
.flt_chap_size
/ 2;
1669 offset
= FLASH_RAW_ACCESS_ADDR
+ (ha
->hw
.flt_region_chap
<< 2);
1670 if (ha
->port_num
== 1)
1671 offset
+= chap_size
;
1674 offset
+= (idx
* sizeof(struct ql4_chap_table
));
1675 rval
= qla4xxx_set_flash(ha
, chap_dma
, offset
,
1676 sizeof(struct ql4_chap_table
),
1677 FLASH_OPT_RMW_COMMIT
);
1679 if (rval
== QLA_SUCCESS
&& ha
->chap_list
) {
1680 /* Update ha chap_list cache */
1681 memcpy((struct ql4_chap_table
*)ha
->chap_list
+ idx
,
1682 chap_table
, sizeof(struct ql4_chap_table
));
1684 dma_pool_free(ha
->chap_dma_pool
, chap_table
, chap_dma
);
1685 if (rval
!= QLA_SUCCESS
)
1693 int qla4xxx_get_uni_chap_at_index(struct scsi_qla_host
*ha
, char *username
,
1694 char *password
, uint16_t chap_index
)
1696 int rval
= QLA_ERROR
;
1697 struct ql4_chap_table
*chap_table
= NULL
;
1698 int max_chap_entries
;
1700 if (!ha
->chap_list
) {
1701 ql4_printk(KERN_ERR
, ha
, "Do not have CHAP table cache\n");
1706 if (!username
|| !password
) {
1707 ql4_printk(KERN_ERR
, ha
, "No memory for username & secret\n");
1713 max_chap_entries
= (ha
->hw
.flt_chap_size
/ 2) /
1714 sizeof(struct ql4_chap_table
);
1716 max_chap_entries
= MAX_CHAP_ENTRIES_40XX
;
1718 if (chap_index
> max_chap_entries
) {
1719 ql4_printk(KERN_ERR
, ha
, "Invalid Chap index\n");
1724 mutex_lock(&ha
->chap_sem
);
1725 chap_table
= (struct ql4_chap_table
*)ha
->chap_list
+ chap_index
;
1726 if (chap_table
->cookie
!= __constant_cpu_to_le16(CHAP_VALID_COOKIE
)) {
1728 goto exit_unlock_uni_chap
;
1731 if (!(chap_table
->flags
& BIT_7
)) {
1732 ql4_printk(KERN_ERR
, ha
, "Unidirectional entry not set\n");
1734 goto exit_unlock_uni_chap
;
1737 strlcpy(password
, chap_table
->secret
, MAX_CHAP_SECRET_LEN
);
1738 strlcpy(username
, chap_table
->name
, MAX_CHAP_NAME_LEN
);
1742 exit_unlock_uni_chap
:
1743 mutex_unlock(&ha
->chap_sem
);
1749 * qla4xxx_get_chap_index - Get chap index given username and secret
1750 * @ha: pointer to adapter structure
1751 * @username: CHAP username to be searched
1752 * @password: CHAP password to be searched
1753 * @bidi: Is this a BIDI CHAP
1754 * @chap_index: CHAP index to be returned
1756 * Match the username and password in the chap_list, return the index if a
1757 * match is found. If a match is not found then add the entry in FLASH and
1758 * return the index at which entry is written in the FLASH.
1760 int qla4xxx_get_chap_index(struct scsi_qla_host
*ha
, char *username
,
1761 char *password
, int bidi
, uint16_t *chap_index
)
1764 int free_index
= -1;
1765 int found_index
= 0;
1766 int max_chap_entries
= 0;
1767 struct ql4_chap_table
*chap_table
;
1770 max_chap_entries
= (ha
->hw
.flt_chap_size
/ 2) /
1771 sizeof(struct ql4_chap_table
);
1773 max_chap_entries
= MAX_CHAP_ENTRIES_40XX
;
1775 if (!ha
->chap_list
) {
1776 ql4_printk(KERN_ERR
, ha
, "Do not have CHAP table cache\n");
1780 if (!username
|| !password
) {
1781 ql4_printk(KERN_ERR
, ha
, "Do not have username and psw\n");
1785 mutex_lock(&ha
->chap_sem
);
1786 for (i
= 0; i
< max_chap_entries
; i
++) {
1787 chap_table
= (struct ql4_chap_table
*)ha
->chap_list
+ i
;
1788 if (chap_table
->cookie
!=
1789 __constant_cpu_to_le16(CHAP_VALID_COOKIE
)) {
1790 if (i
> MAX_RESRV_CHAP_IDX
&& free_index
== -1)
1795 if (chap_table
->flags
& BIT_7
)
1798 if (chap_table
->flags
& BIT_6
)
1801 if (!strncmp(chap_table
->secret
, password
,
1802 MAX_CHAP_SECRET_LEN
) &&
1803 !strncmp(chap_table
->name
, username
,
1804 MAX_CHAP_NAME_LEN
)) {
1811 /* If chap entry is not present and a free index is available then
1812 * write the entry in flash
1814 if (!found_index
&& free_index
!= -1) {
1815 rval
= qla4xxx_set_chap(ha
, username
, password
,
1818 *chap_index
= free_index
;
1823 mutex_unlock(&ha
->chap_sem
);
1830 int qla4xxx_conn_close_sess_logout(struct scsi_qla_host
*ha
,
1831 uint16_t fw_ddb_index
,
1832 uint16_t connection_id
,
1835 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1836 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1837 int status
= QLA_SUCCESS
;
1839 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1840 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1842 mbox_cmd
[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT
;
1843 mbox_cmd
[1] = fw_ddb_index
;
1844 mbox_cmd
[2] = connection_id
;
1845 mbox_cmd
[3] = option
;
1847 status
= qla4xxx_mailbox_command(ha
, 4, 2, &mbox_cmd
[0], &mbox_sts
[0]);
1848 if (status
!= QLA_SUCCESS
) {
1849 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: MBOX_CMD_CONN_CLOSE "
1850 "option %04x failed w/ status %04X %04X\n",
1851 __func__
, option
, mbox_sts
[0], mbox_sts
[1]));
1857 * qla4_84xx_extend_idc_tmo - Extend IDC Timeout.
1858 * @ha: Pointer to host adapter structure.
1859 * @ext_tmo: idc timeout value
1861 * Requests firmware to extend the idc timeout value.
1863 static int qla4_84xx_extend_idc_tmo(struct scsi_qla_host
*ha
, uint32_t ext_tmo
)
1865 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1866 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1869 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1870 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1873 mbox_cmd
[0] = MBOX_CMD_IDC_TIME_EXTEND
;
1874 mbox_cmd
[1] = ((ha
->idc_info
.request_desc
& 0xfffff0ff) |
1875 (ext_tmo
<< 8)); /* new timeout */
1876 mbox_cmd
[2] = ha
->idc_info
.info1
;
1877 mbox_cmd
[3] = ha
->idc_info
.info2
;
1878 mbox_cmd
[4] = ha
->idc_info
.info3
;
1880 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, MBOX_REG_COUNT
,
1881 mbox_cmd
, mbox_sts
);
1882 if (status
!= QLA_SUCCESS
) {
1883 DEBUG2(ql4_printk(KERN_INFO
, ha
,
1884 "scsi%ld: %s: failed status %04X\n",
1885 ha
->host_no
, __func__
, mbox_sts
[0]));
1888 ql4_printk(KERN_INFO
, ha
, "%s: IDC timeout extended by %d secs\n",
1895 int qla4xxx_disable_acb(struct scsi_qla_host
*ha
)
1897 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1898 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1899 int status
= QLA_SUCCESS
;
1901 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1902 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1904 mbox_cmd
[0] = MBOX_CMD_DISABLE_ACB
;
1906 status
= qla4xxx_mailbox_command(ha
, 8, 5, &mbox_cmd
[0], &mbox_sts
[0]);
1907 if (status
!= QLA_SUCCESS
) {
1908 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: MBOX_CMD_DISABLE_ACB "
1909 "failed w/ status %04X %04X %04X", __func__
,
1910 mbox_sts
[0], mbox_sts
[1], mbox_sts
[2]));
1912 if (is_qla8042(ha
) &&
1913 test_bit(DPC_POST_IDC_ACK
, &ha
->dpc_flags
) &&
1914 (mbox_sts
[0] != MBOX_STS_COMMAND_COMPLETE
)) {
1916 * Disable ACB mailbox command takes time to complete
1917 * based on the total number of targets connected.
1918 * For 512 targets, it took approximately 5 secs to
1919 * complete. Setting the timeout value to 8, with the 3
1922 qla4_84xx_extend_idc_tmo(ha
, IDC_EXTEND_TOV
);
1923 if (!wait_for_completion_timeout(&ha
->disable_acb_comp
,
1924 IDC_EXTEND_TOV
* HZ
)) {
1925 ql4_printk(KERN_WARNING
, ha
, "%s: Disable ACB Completion not received\n",
1933 int qla4xxx_get_acb(struct scsi_qla_host
*ha
, dma_addr_t acb_dma
,
1934 uint32_t acb_type
, uint32_t len
)
1936 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
1937 uint32_t mbox_sts
[MBOX_REG_COUNT
];
1938 int status
= QLA_SUCCESS
;
1940 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
1941 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
1943 mbox_cmd
[0] = MBOX_CMD_GET_ACB
;
1944 mbox_cmd
[1] = acb_type
;
1945 mbox_cmd
[2] = LSDW(acb_dma
);
1946 mbox_cmd
[3] = MSDW(acb_dma
);
1949 status
= qla4xxx_mailbox_command(ha
, 5, 5, &mbox_cmd
[0], &mbox_sts
[0]);
1950 if (status
!= QLA_SUCCESS
) {
1951 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: MBOX_CMD_GET_ACB "
1952 "failed w/ status %04X\n", __func__
,
1958 int qla4xxx_set_acb(struct scsi_qla_host
*ha
, uint32_t *mbox_cmd
,
1959 uint32_t *mbox_sts
, dma_addr_t acb_dma
)
1961 int status
= QLA_SUCCESS
;
1963 memset(mbox_cmd
, 0, sizeof(mbox_cmd
[0]) * MBOX_REG_COUNT
);
1964 memset(mbox_sts
, 0, sizeof(mbox_sts
[0]) * MBOX_REG_COUNT
);
1965 mbox_cmd
[0] = MBOX_CMD_SET_ACB
;
1966 mbox_cmd
[1] = 0; /* Primary ACB */
1967 mbox_cmd
[2] = LSDW(acb_dma
);
1968 mbox_cmd
[3] = MSDW(acb_dma
);
1969 mbox_cmd
[4] = sizeof(struct addr_ctrl_blk
);
1971 status
= qla4xxx_mailbox_command(ha
, 5, 5, &mbox_cmd
[0], &mbox_sts
[0]);
1972 if (status
!= QLA_SUCCESS
) {
1973 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: MBOX_CMD_SET_ACB "
1974 "failed w/ status %04X\n", __func__
,
1980 int qla4xxx_set_param_ddbentry(struct scsi_qla_host
*ha
,
1981 struct ddb_entry
*ddb_entry
,
1982 struct iscsi_cls_conn
*cls_conn
,
1985 struct dev_db_entry
*fw_ddb_entry
;
1986 struct iscsi_conn
*conn
;
1987 struct iscsi_session
*sess
;
1988 struct qla_conn
*qla_conn
;
1989 struct sockaddr
*dst_addr
;
1990 dma_addr_t fw_ddb_entry_dma
;
1991 int status
= QLA_SUCCESS
;
1993 struct sockaddr_in
*addr
;
1994 struct sockaddr_in6
*addr6
;
1996 uint16_t iscsi_opts
= 0;
1997 uint32_t options
= 0;
1998 uint16_t idx
, *ptid
;
2000 fw_ddb_entry
= dma_alloc_coherent(&ha
->pdev
->dev
, sizeof(*fw_ddb_entry
),
2001 &fw_ddb_entry_dma
, GFP_KERNEL
);
2002 if (!fw_ddb_entry
) {
2003 DEBUG2(ql4_printk(KERN_ERR
, ha
,
2004 "%s: Unable to allocate dma buffer.\n",
2007 goto exit_set_param_no_free
;
2010 conn
= cls_conn
->dd_data
;
2011 qla_conn
= conn
->dd_data
;
2012 sess
= conn
->session
;
2013 dst_addr
= (struct sockaddr
*)&qla_conn
->qla_ep
->dst_addr
;
2015 if (dst_addr
->sa_family
== AF_INET6
)
2016 options
|= IPV6_DEFAULT_DDB_ENTRY
;
2018 status
= qla4xxx_get_default_ddb(ha
, options
, fw_ddb_entry_dma
);
2019 if (status
== QLA_ERROR
) {
2021 goto exit_set_param
;
2024 ptid
= (uint16_t *)&fw_ddb_entry
->isid
[1];
2025 *ptid
= cpu_to_le16((uint16_t)ddb_entry
->sess
->target_id
);
2027 DEBUG2(ql4_printk(KERN_INFO
, ha
, "ISID [%pmR]\n", fw_ddb_entry
->isid
));
2029 iscsi_opts
= le16_to_cpu(fw_ddb_entry
->iscsi_options
);
2030 memset(fw_ddb_entry
->iscsi_alias
, 0, sizeof(fw_ddb_entry
->iscsi_alias
));
2032 memset(fw_ddb_entry
->iscsi_name
, 0, sizeof(fw_ddb_entry
->iscsi_name
));
2034 if (sess
->targetname
!= NULL
) {
2035 memcpy(fw_ddb_entry
->iscsi_name
, sess
->targetname
,
2036 min(strlen(sess
->targetname
),
2037 sizeof(fw_ddb_entry
->iscsi_name
)));
2040 memset(fw_ddb_entry
->ip_addr
, 0, sizeof(fw_ddb_entry
->ip_addr
));
2041 memset(fw_ddb_entry
->tgt_addr
, 0, sizeof(fw_ddb_entry
->tgt_addr
));
2043 fw_ddb_entry
->options
= DDB_OPT_TARGET
| DDB_OPT_AUTO_SENDTGTS_DISABLE
;
2045 if (dst_addr
->sa_family
== AF_INET
) {
2046 addr
= (struct sockaddr_in
*)dst_addr
;
2047 ip
= (char *)&addr
->sin_addr
;
2048 memcpy(fw_ddb_entry
->ip_addr
, ip
, IP_ADDR_LEN
);
2049 fw_ddb_entry
->port
= cpu_to_le16(ntohs(addr
->sin_port
));
2050 DEBUG2(ql4_printk(KERN_INFO
, ha
,
2051 "%s: Destination Address [%pI4]: index [%d]\n",
2052 __func__
, fw_ddb_entry
->ip_addr
,
2053 ddb_entry
->fw_ddb_index
));
2054 } else if (dst_addr
->sa_family
== AF_INET6
) {
2055 addr6
= (struct sockaddr_in6
*)dst_addr
;
2056 ip
= (char *)&addr6
->sin6_addr
;
2057 memcpy(fw_ddb_entry
->ip_addr
, ip
, IPv6_ADDR_LEN
);
2058 fw_ddb_entry
->port
= cpu_to_le16(ntohs(addr6
->sin6_port
));
2059 fw_ddb_entry
->options
|= DDB_OPT_IPV6_DEVICE
;
2060 DEBUG2(ql4_printk(KERN_INFO
, ha
,
2061 "%s: Destination Address [%pI6]: index [%d]\n",
2062 __func__
, fw_ddb_entry
->ip_addr
,
2063 ddb_entry
->fw_ddb_index
));
2065 ql4_printk(KERN_ERR
, ha
,
2066 "%s: Failed to get IP Address\n",
2069 goto exit_set_param
;
2073 if (sess
->username
!= NULL
&& sess
->password
!= NULL
) {
2074 if (strlen(sess
->username
) && strlen(sess
->password
)) {
2075 iscsi_opts
|= BIT_7
;
2077 rval
= qla4xxx_get_chap_index(ha
, sess
->username
,
2081 goto exit_set_param
;
2083 fw_ddb_entry
->chap_tbl_idx
= cpu_to_le16(idx
);
2087 if (sess
->username_in
!= NULL
&& sess
->password_in
!= NULL
) {
2088 /* Check if BIDI CHAP */
2089 if (strlen(sess
->username_in
) && strlen(sess
->password_in
)) {
2090 iscsi_opts
|= BIT_4
;
2092 rval
= qla4xxx_get_chap_index(ha
, sess
->username_in
,
2096 goto exit_set_param
;
2100 if (sess
->initial_r2t_en
)
2101 iscsi_opts
|= BIT_10
;
2103 if (sess
->imm_data_en
)
2104 iscsi_opts
|= BIT_11
;
2106 fw_ddb_entry
->iscsi_options
= cpu_to_le16(iscsi_opts
);
2108 if (conn
->max_recv_dlength
)
2109 fw_ddb_entry
->iscsi_max_rcv_data_seg_len
=
2110 __constant_cpu_to_le16((conn
->max_recv_dlength
/ BYTE_UNITS
));
2113 fw_ddb_entry
->iscsi_max_outsnd_r2t
= cpu_to_le16(sess
->max_r2t
);
2115 if (sess
->first_burst
)
2116 fw_ddb_entry
->iscsi_first_burst_len
=
2117 __constant_cpu_to_le16((sess
->first_burst
/ BYTE_UNITS
));
2119 if (sess
->max_burst
)
2120 fw_ddb_entry
->iscsi_max_burst_len
=
2121 __constant_cpu_to_le16((sess
->max_burst
/ BYTE_UNITS
));
2123 if (sess
->time2wait
)
2124 fw_ddb_entry
->iscsi_def_time2wait
=
2125 cpu_to_le16(sess
->time2wait
);
2127 if (sess
->time2retain
)
2128 fw_ddb_entry
->iscsi_def_time2retain
=
2129 cpu_to_le16(sess
->time2retain
);
2131 status
= qla4xxx_set_ddb_entry(ha
, ddb_entry
->fw_ddb_index
,
2132 fw_ddb_entry_dma
, mbx_sts
);
2134 if (status
!= QLA_SUCCESS
)
2137 dma_free_coherent(&ha
->pdev
->dev
, sizeof(*fw_ddb_entry
),
2138 fw_ddb_entry
, fw_ddb_entry_dma
);
2139 exit_set_param_no_free
:
2143 int qla4xxx_get_mgmt_data(struct scsi_qla_host
*ha
, uint16_t fw_ddb_index
,
2144 uint16_t stats_size
, dma_addr_t stats_dma
)
2146 int status
= QLA_SUCCESS
;
2147 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2148 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2150 memset(mbox_cmd
, 0, sizeof(mbox_cmd
[0]) * MBOX_REG_COUNT
);
2151 memset(mbox_sts
, 0, sizeof(mbox_sts
[0]) * MBOX_REG_COUNT
);
2152 mbox_cmd
[0] = MBOX_CMD_GET_MANAGEMENT_DATA
;
2153 mbox_cmd
[1] = fw_ddb_index
;
2154 mbox_cmd
[2] = LSDW(stats_dma
);
2155 mbox_cmd
[3] = MSDW(stats_dma
);
2156 mbox_cmd
[4] = stats_size
;
2158 status
= qla4xxx_mailbox_command(ha
, 5, 1, &mbox_cmd
[0], &mbox_sts
[0]);
2159 if (status
!= QLA_SUCCESS
) {
2160 DEBUG2(ql4_printk(KERN_WARNING
, ha
,
2161 "%s: MBOX_CMD_GET_MANAGEMENT_DATA "
2162 "failed w/ status %04X\n", __func__
,
2168 int qla4xxx_get_ip_state(struct scsi_qla_host
*ha
, uint32_t acb_idx
,
2169 uint32_t ip_idx
, uint32_t *sts
)
2171 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2172 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2173 int status
= QLA_SUCCESS
;
2175 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2176 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2177 mbox_cmd
[0] = MBOX_CMD_GET_IP_ADDR_STATE
;
2178 mbox_cmd
[1] = acb_idx
;
2179 mbox_cmd
[2] = ip_idx
;
2181 status
= qla4xxx_mailbox_command(ha
, 3, 8, &mbox_cmd
[0], &mbox_sts
[0]);
2182 if (status
!= QLA_SUCCESS
) {
2183 DEBUG2(ql4_printk(KERN_WARNING
, ha
, "%s: "
2184 "MBOX_CMD_GET_IP_ADDR_STATE failed w/ "
2185 "status %04X\n", __func__
, mbox_sts
[0]));
2187 memcpy(sts
, mbox_sts
, sizeof(mbox_sts
));
2191 int qla4xxx_get_nvram(struct scsi_qla_host
*ha
, dma_addr_t nvram_dma
,
2192 uint32_t offset
, uint32_t size
)
2194 int status
= QLA_SUCCESS
;
2195 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2196 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2198 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2199 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2201 mbox_cmd
[0] = MBOX_CMD_GET_NVRAM
;
2202 mbox_cmd
[1] = LSDW(nvram_dma
);
2203 mbox_cmd
[2] = MSDW(nvram_dma
);
2204 mbox_cmd
[3] = offset
;
2207 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 1, &mbox_cmd
[0],
2209 if (status
!= QLA_SUCCESS
) {
2210 DEBUG2(ql4_printk(KERN_ERR
, ha
, "scsi%ld: %s: failed "
2211 "status %04X\n", ha
->host_no
, __func__
,
2217 int qla4xxx_set_nvram(struct scsi_qla_host
*ha
, dma_addr_t nvram_dma
,
2218 uint32_t offset
, uint32_t size
)
2220 int status
= QLA_SUCCESS
;
2221 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2222 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2224 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2225 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2227 mbox_cmd
[0] = MBOX_CMD_SET_NVRAM
;
2228 mbox_cmd
[1] = LSDW(nvram_dma
);
2229 mbox_cmd
[2] = MSDW(nvram_dma
);
2230 mbox_cmd
[3] = offset
;
2233 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 1, &mbox_cmd
[0],
2235 if (status
!= QLA_SUCCESS
) {
2236 DEBUG2(ql4_printk(KERN_ERR
, ha
, "scsi%ld: %s: failed "
2237 "status %04X\n", ha
->host_no
, __func__
,
2243 int qla4xxx_restore_factory_defaults(struct scsi_qla_host
*ha
,
2244 uint32_t region
, uint32_t field0
,
2247 int status
= QLA_SUCCESS
;
2248 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2249 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2251 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2252 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2254 mbox_cmd
[0] = MBOX_CMD_RESTORE_FACTORY_DEFAULTS
;
2255 mbox_cmd
[3] = region
;
2256 mbox_cmd
[4] = field0
;
2257 mbox_cmd
[5] = field1
;
2259 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 3, &mbox_cmd
[0],
2261 if (status
!= QLA_SUCCESS
) {
2262 DEBUG2(ql4_printk(KERN_ERR
, ha
, "scsi%ld: %s: failed "
2263 "status %04X\n", ha
->host_no
, __func__
,
2270 * qla4_8xxx_set_param - set driver version in firmware.
2271 * @ha: Pointer to host adapter structure.
2272 * @param: Parameter to set i.e driver version
2274 int qla4_8xxx_set_param(struct scsi_qla_host
*ha
, int param
)
2276 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2277 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2280 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2281 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2283 mbox_cmd
[0] = MBOX_CMD_SET_PARAM
;
2284 if (param
== SET_DRVR_VERSION
) {
2285 mbox_cmd
[1] = SET_DRVR_VERSION
;
2286 strncpy((char *)&mbox_cmd
[2], QLA4XXX_DRIVER_VERSION
,
2287 MAX_DRVR_VER_LEN
- 1);
2289 ql4_printk(KERN_ERR
, ha
, "%s: invalid parameter 0x%x\n",
2292 goto exit_set_param
;
2295 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, 2, mbox_cmd
,
2297 if (status
== QLA_ERROR
)
2298 ql4_printk(KERN_ERR
, ha
, "%s: failed status %04X\n",
2299 __func__
, mbox_sts
[0]);
2306 * qla4_83xx_post_idc_ack - post IDC ACK
2307 * @ha: Pointer to host adapter structure.
2309 * Posts IDC ACK for IDC Request Notification AEN.
2311 int qla4_83xx_post_idc_ack(struct scsi_qla_host
*ha
)
2313 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2314 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2317 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2318 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2320 mbox_cmd
[0] = MBOX_CMD_IDC_ACK
;
2321 mbox_cmd
[1] = ha
->idc_info
.request_desc
;
2322 mbox_cmd
[2] = ha
->idc_info
.info1
;
2323 mbox_cmd
[3] = ha
->idc_info
.info2
;
2324 mbox_cmd
[4] = ha
->idc_info
.info3
;
2326 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, MBOX_REG_COUNT
,
2327 mbox_cmd
, mbox_sts
);
2328 if (status
== QLA_ERROR
)
2329 ql4_printk(KERN_ERR
, ha
, "%s: failed status %04X\n", __func__
,
2332 ql4_printk(KERN_INFO
, ha
, "%s: IDC ACK posted\n", __func__
);
2337 int qla4_84xx_config_acb(struct scsi_qla_host
*ha
, int acb_config
)
2339 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2340 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2341 struct addr_ctrl_blk
*acb
= NULL
;
2342 uint32_t acb_len
= sizeof(struct addr_ctrl_blk
);
2343 int rval
= QLA_SUCCESS
;
2346 acb
= dma_alloc_coherent(&ha
->pdev
->dev
,
2347 sizeof(struct addr_ctrl_blk
),
2348 &acb_dma
, GFP_KERNEL
);
2350 ql4_printk(KERN_ERR
, ha
, "%s: Unable to alloc acb\n", __func__
);
2352 goto exit_config_acb
;
2354 memset(acb
, 0, acb_len
);
2356 switch (acb_config
) {
2357 case ACB_CONFIG_DISABLE
:
2358 rval
= qla4xxx_get_acb(ha
, acb_dma
, 0, acb_len
);
2359 if (rval
!= QLA_SUCCESS
)
2362 rval
= qla4xxx_disable_acb(ha
);
2363 if (rval
!= QLA_SUCCESS
)
2367 ha
->saved_acb
= kzalloc(acb_len
, GFP_KERNEL
);
2369 if (!ha
->saved_acb
) {
2370 ql4_printk(KERN_ERR
, ha
, "%s: Unable to alloc acb\n",
2375 memcpy(ha
->saved_acb
, acb
, acb_len
);
2377 case ACB_CONFIG_SET
:
2379 if (!ha
->saved_acb
) {
2380 ql4_printk(KERN_ERR
, ha
, "%s: Can't set ACB, Saved ACB not available\n",
2386 memcpy(acb
, ha
->saved_acb
, acb_len
);
2388 rval
= qla4xxx_set_acb(ha
, &mbox_cmd
[0], &mbox_sts
[0], acb_dma
);
2389 if (rval
!= QLA_SUCCESS
)
2394 ql4_printk(KERN_ERR
, ha
, "%s: Invalid ACB Configuration\n",
2399 dma_free_coherent(&ha
->pdev
->dev
, sizeof(struct addr_ctrl_blk
), acb
,
2402 if ((acb_config
== ACB_CONFIG_SET
) && ha
->saved_acb
) {
2403 kfree(ha
->saved_acb
);
2404 ha
->saved_acb
= NULL
;
2406 DEBUG2(ql4_printk(KERN_INFO
, ha
,
2407 "%s %s\n", __func__
,
2408 rval
== QLA_SUCCESS
? "SUCCEEDED" : "FAILED"));
2412 int qla4_83xx_get_port_config(struct scsi_qla_host
*ha
, uint32_t *config
)
2414 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2415 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2418 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2419 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2421 mbox_cmd
[0] = MBOX_CMD_GET_PORT_CONFIG
;
2423 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, MBOX_REG_COUNT
,
2424 mbox_cmd
, mbox_sts
);
2425 if (status
== QLA_SUCCESS
)
2426 *config
= mbox_sts
[1];
2428 ql4_printk(KERN_ERR
, ha
, "%s: failed status %04X\n", __func__
,
2434 int qla4_83xx_set_port_config(struct scsi_qla_host
*ha
, uint32_t *config
)
2436 uint32_t mbox_cmd
[MBOX_REG_COUNT
];
2437 uint32_t mbox_sts
[MBOX_REG_COUNT
];
2440 memset(&mbox_cmd
, 0, sizeof(mbox_cmd
));
2441 memset(&mbox_sts
, 0, sizeof(mbox_sts
));
2443 mbox_cmd
[0] = MBOX_CMD_SET_PORT_CONFIG
;
2444 mbox_cmd
[1] = *config
;
2446 status
= qla4xxx_mailbox_command(ha
, MBOX_REG_COUNT
, MBOX_REG_COUNT
,
2447 mbox_cmd
, mbox_sts
);
2448 if (status
!= QLA_SUCCESS
)
2449 ql4_printk(KERN_ERR
, ha
, "%s: failed status %04X\n", __func__
,