gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / staging / comedi / drivers.c
blob750a6ff3c03c26dad4e428170a60d5b51ac7d9c0
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * module/drivers.c
4 * functions for manipulating drivers
6 * COMEDI - Linux Control and Measurement Device Interface
7 * Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
8 * Copyright (C) 2002 Frank Mori Hess <fmhess@users.sourceforge.net>
9 */
11 #include <linux/device.h>
12 #include <linux/module.h>
13 #include <linux/errno.h>
14 #include <linux/kernel.h>
15 #include <linux/ioport.h>
16 #include <linux/slab.h>
17 #include <linux/dma-direction.h>
18 #include <linux/interrupt.h>
19 #include <linux/firmware.h>
21 #include "comedidev.h"
22 #include "comedi_internal.h"
24 struct comedi_driver *comedi_drivers;
25 /* protects access to comedi_drivers */
26 DEFINE_MUTEX(comedi_drivers_list_lock);
28 /**
29 * comedi_set_hw_dev() - Set hardware device associated with COMEDI device
30 * @dev: COMEDI device.
31 * @hw_dev: Hardware device.
33 * For automatically configured COMEDI devices (resulting from a call to
34 * comedi_auto_config() or one of its wrappers from the low-level COMEDI
35 * driver), comedi_set_hw_dev() is called automatically by the COMEDI core
36 * to associate the COMEDI device with the hardware device. It can also be
37 * called directly by "legacy" low-level COMEDI drivers that rely on the
38 * %COMEDI_DEVCONFIG ioctl to configure the hardware as long as the hardware
39 * has a &struct device.
41 * If @dev->hw_dev is NULL, it gets a reference to @hw_dev and sets
42 * @dev->hw_dev, otherwise, it does nothing. Calling it multiple times
43 * with the same hardware device is not considered an error. If it gets
44 * a reference to the hardware device, it will be automatically 'put' when
45 * the device is detached from COMEDI.
47 * Returns 0 if @dev->hw_dev was NULL or the same as @hw_dev, otherwise
48 * returns -EEXIST.
50 int comedi_set_hw_dev(struct comedi_device *dev, struct device *hw_dev)
52 if (hw_dev == dev->hw_dev)
53 return 0;
54 if (dev->hw_dev)
55 return -EEXIST;
56 dev->hw_dev = get_device(hw_dev);
57 return 0;
59 EXPORT_SYMBOL_GPL(comedi_set_hw_dev);
61 static void comedi_clear_hw_dev(struct comedi_device *dev)
63 put_device(dev->hw_dev);
64 dev->hw_dev = NULL;
67 /**
68 * comedi_alloc_devpriv() - Allocate memory for the device private data
69 * @dev: COMEDI device.
70 * @size: Size of the memory to allocate.
72 * The allocated memory is zero-filled. @dev->private points to it on
73 * return. The memory will be automatically freed when the COMEDI device is
74 * "detached".
76 * Returns a pointer to the allocated memory, or NULL on failure.
78 void *comedi_alloc_devpriv(struct comedi_device *dev, size_t size)
80 dev->private = kzalloc(size, GFP_KERNEL);
81 return dev->private;
83 EXPORT_SYMBOL_GPL(comedi_alloc_devpriv);
85 /**
86 * comedi_alloc_subdevices() - Allocate subdevices for COMEDI device
87 * @dev: COMEDI device.
88 * @num_subdevices: Number of subdevices to allocate.
90 * Allocates and initializes an array of &struct comedi_subdevice for the
91 * COMEDI device. If successful, sets @dev->subdevices to point to the
92 * first one and @dev->n_subdevices to the number.
94 * Returns 0 on success, -EINVAL if @num_subdevices is < 1, or -ENOMEM if
95 * failed to allocate the memory.
97 int comedi_alloc_subdevices(struct comedi_device *dev, int num_subdevices)
99 struct comedi_subdevice *s;
100 int i;
102 if (num_subdevices < 1)
103 return -EINVAL;
105 s = kcalloc(num_subdevices, sizeof(*s), GFP_KERNEL);
106 if (!s)
107 return -ENOMEM;
108 dev->subdevices = s;
109 dev->n_subdevices = num_subdevices;
111 for (i = 0; i < num_subdevices; ++i) {
112 s = &dev->subdevices[i];
113 s->device = dev;
114 s->index = i;
115 s->async_dma_dir = DMA_NONE;
116 spin_lock_init(&s->spin_lock);
117 s->minor = -1;
119 return 0;
121 EXPORT_SYMBOL_GPL(comedi_alloc_subdevices);
124 * comedi_alloc_subdev_readback() - Allocate memory for the subdevice readback
125 * @s: COMEDI subdevice.
127 * This is called by low-level COMEDI drivers to allocate an array to record
128 * the last values written to a subdevice's analog output channels (at least
129 * by the %INSN_WRITE instruction), to allow them to be read back by an
130 * %INSN_READ instruction. It also provides a default handler for the
131 * %INSN_READ instruction unless one has already been set.
133 * On success, @s->readback points to the first element of the array, which
134 * is zero-filled. The low-level driver is responsible for updating its
135 * contents. @s->insn_read will be set to comedi_readback_insn_read()
136 * unless it is already non-NULL.
138 * Returns 0 on success, -EINVAL if the subdevice has no channels, or
139 * -ENOMEM on allocation failure.
141 int comedi_alloc_subdev_readback(struct comedi_subdevice *s)
143 if (!s->n_chan)
144 return -EINVAL;
146 s->readback = kcalloc(s->n_chan, sizeof(*s->readback), GFP_KERNEL);
147 if (!s->readback)
148 return -ENOMEM;
150 if (!s->insn_read)
151 s->insn_read = comedi_readback_insn_read;
153 return 0;
155 EXPORT_SYMBOL_GPL(comedi_alloc_subdev_readback);
157 static void comedi_device_detach_cleanup(struct comedi_device *dev)
159 int i;
160 struct comedi_subdevice *s;
162 lockdep_assert_held(&dev->attach_lock);
163 lockdep_assert_held(&dev->mutex);
164 if (dev->subdevices) {
165 for (i = 0; i < dev->n_subdevices; i++) {
166 s = &dev->subdevices[i];
167 if (comedi_can_auto_free_spriv(s))
168 kfree(s->private);
169 comedi_free_subdevice_minor(s);
170 if (s->async) {
171 comedi_buf_alloc(dev, s, 0);
172 kfree(s->async);
174 kfree(s->readback);
176 kfree(dev->subdevices);
177 dev->subdevices = NULL;
178 dev->n_subdevices = 0;
180 kfree(dev->private);
181 kfree(dev->pacer);
182 dev->private = NULL;
183 dev->pacer = NULL;
184 dev->driver = NULL;
185 dev->board_name = NULL;
186 dev->board_ptr = NULL;
187 dev->mmio = NULL;
188 dev->iobase = 0;
189 dev->iolen = 0;
190 dev->ioenabled = false;
191 dev->irq = 0;
192 dev->read_subdev = NULL;
193 dev->write_subdev = NULL;
194 dev->open = NULL;
195 dev->close = NULL;
196 comedi_clear_hw_dev(dev);
199 void comedi_device_detach(struct comedi_device *dev)
201 lockdep_assert_held(&dev->mutex);
202 comedi_device_cancel_all(dev);
203 down_write(&dev->attach_lock);
204 dev->attached = false;
205 dev->detach_count++;
206 if (dev->driver)
207 dev->driver->detach(dev);
208 comedi_device_detach_cleanup(dev);
209 up_write(&dev->attach_lock);
212 static int poll_invalid(struct comedi_device *dev, struct comedi_subdevice *s)
214 return -EINVAL;
217 static int insn_device_inval(struct comedi_device *dev,
218 struct comedi_insn *insn, unsigned int *data)
220 return -EINVAL;
223 static unsigned int get_zero_valid_routes(struct comedi_device *dev,
224 unsigned int n_pairs,
225 unsigned int *pair_data)
227 return 0;
230 int insn_inval(struct comedi_device *dev, struct comedi_subdevice *s,
231 struct comedi_insn *insn, unsigned int *data)
233 return -EINVAL;
237 * comedi_readback_insn_read() - A generic (*insn_read) for subdevice readback.
238 * @dev: COMEDI device.
239 * @s: COMEDI subdevice.
240 * @insn: COMEDI instruction.
241 * @data: Pointer to return the readback data.
243 * Handles the %INSN_READ instruction for subdevices that use the readback
244 * array allocated by comedi_alloc_subdev_readback(). It may be used
245 * directly as the subdevice's handler (@s->insn_read) or called via a
246 * wrapper.
248 * @insn->n is normally 1, which will read a single value. If higher, the
249 * same element of the readback array will be read multiple times.
251 * Returns @insn->n on success, or -EINVAL if @s->readback is NULL.
253 int comedi_readback_insn_read(struct comedi_device *dev,
254 struct comedi_subdevice *s,
255 struct comedi_insn *insn,
256 unsigned int *data)
258 unsigned int chan = CR_CHAN(insn->chanspec);
259 int i;
261 if (!s->readback)
262 return -EINVAL;
264 for (i = 0; i < insn->n; i++)
265 data[i] = s->readback[chan];
267 return insn->n;
269 EXPORT_SYMBOL_GPL(comedi_readback_insn_read);
272 * comedi_timeout() - Busy-wait for a driver condition to occur
273 * @dev: COMEDI device.
274 * @s: COMEDI subdevice.
275 * @insn: COMEDI instruction.
276 * @cb: Callback to check for the condition.
277 * @context: Private context from the driver.
279 * Busy-waits for up to a second (%COMEDI_TIMEOUT_MS) for the condition or
280 * some error (other than -EBUSY) to occur. The parameters @dev, @s, @insn,
281 * and @context are passed to the callback function, which returns -EBUSY to
282 * continue waiting or some other value to stop waiting (generally 0 if the
283 * condition occurred, or some error value).
285 * Returns -ETIMEDOUT if timed out, otherwise the return value from the
286 * callback function.
288 int comedi_timeout(struct comedi_device *dev,
289 struct comedi_subdevice *s,
290 struct comedi_insn *insn,
291 int (*cb)(struct comedi_device *dev,
292 struct comedi_subdevice *s,
293 struct comedi_insn *insn,
294 unsigned long context),
295 unsigned long context)
297 unsigned long timeout = jiffies + msecs_to_jiffies(COMEDI_TIMEOUT_MS);
298 int ret;
300 while (time_before(jiffies, timeout)) {
301 ret = cb(dev, s, insn, context);
302 if (ret != -EBUSY)
303 return ret; /* success (0) or non EBUSY errno */
304 cpu_relax();
306 return -ETIMEDOUT;
308 EXPORT_SYMBOL_GPL(comedi_timeout);
311 * comedi_dio_insn_config() - Boilerplate (*insn_config) for DIO subdevices
312 * @dev: COMEDI device.
313 * @s: COMEDI subdevice.
314 * @insn: COMEDI instruction.
315 * @data: Instruction parameters and return data.
316 * @mask: io_bits mask for grouped channels, or 0 for single channel.
318 * If @mask is 0, it is replaced with a single-bit mask corresponding to the
319 * channel number specified by @insn->chanspec. Otherwise, @mask
320 * corresponds to a group of channels (which should include the specified
321 * channel) that are always configured together as inputs or outputs.
323 * Partially handles the %INSN_CONFIG_DIO_INPUT, %INSN_CONFIG_DIO_OUTPUTS,
324 * and %INSN_CONFIG_DIO_QUERY instructions. The first two update
325 * @s->io_bits to record the directions of the masked channels. The last
326 * one sets @data[1] to the current direction of the group of channels
327 * (%COMEDI_INPUT) or %COMEDI_OUTPUT) as recorded in @s->io_bits.
329 * The caller is responsible for updating the DIO direction in the hardware
330 * registers if this function returns 0.
332 * Returns 0 for a %INSN_CONFIG_DIO_INPUT or %INSN_CONFIG_DIO_OUTPUT
333 * instruction, @insn->n (> 0) for a %INSN_CONFIG_DIO_QUERY instruction, or
334 * -EINVAL for some other instruction.
336 int comedi_dio_insn_config(struct comedi_device *dev,
337 struct comedi_subdevice *s,
338 struct comedi_insn *insn,
339 unsigned int *data,
340 unsigned int mask)
342 unsigned int chan_mask = 1 << CR_CHAN(insn->chanspec);
344 if (!mask)
345 mask = chan_mask;
347 switch (data[0]) {
348 case INSN_CONFIG_DIO_INPUT:
349 s->io_bits &= ~mask;
350 break;
352 case INSN_CONFIG_DIO_OUTPUT:
353 s->io_bits |= mask;
354 break;
356 case INSN_CONFIG_DIO_QUERY:
357 data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
358 return insn->n;
360 default:
361 return -EINVAL;
364 return 0;
366 EXPORT_SYMBOL_GPL(comedi_dio_insn_config);
369 * comedi_dio_update_state() - Update the internal state of DIO subdevices
370 * @s: COMEDI subdevice.
371 * @data: The channel mask and bits to update.
373 * Updates @s->state which holds the internal state of the outputs for DIO
374 * or DO subdevices (up to 32 channels). @data[0] contains a bit-mask of
375 * the channels to be updated. @data[1] contains a bit-mask of those
376 * channels to be set to '1'. The caller is responsible for updating the
377 * outputs in hardware according to @s->state. As a minimum, the channels
378 * in the returned bit-mask need to be updated.
380 * Returns @mask with non-existent channels removed.
382 unsigned int comedi_dio_update_state(struct comedi_subdevice *s,
383 unsigned int *data)
385 unsigned int chanmask = (s->n_chan < 32) ? ((1 << s->n_chan) - 1)
386 : 0xffffffff;
387 unsigned int mask = data[0] & chanmask;
388 unsigned int bits = data[1];
390 if (mask) {
391 s->state &= ~mask;
392 s->state |= (bits & mask);
395 return mask;
397 EXPORT_SYMBOL_GPL(comedi_dio_update_state);
400 * comedi_bytes_per_scan_cmd() - Get length of asynchronous command "scan" in
401 * bytes
402 * @s: COMEDI subdevice.
403 * @cmd: COMEDI command.
405 * Determines the overall scan length according to the subdevice type and the
406 * number of channels in the scan for the specified command.
408 * For digital input, output or input/output subdevices, samples for
409 * multiple channels are assumed to be packed into one or more unsigned
410 * short or unsigned int values according to the subdevice's %SDF_LSAMPL
411 * flag. For other types of subdevice, samples are assumed to occupy a
412 * whole unsigned short or unsigned int according to the %SDF_LSAMPL flag.
414 * Returns the overall scan length in bytes.
416 unsigned int comedi_bytes_per_scan_cmd(struct comedi_subdevice *s,
417 struct comedi_cmd *cmd)
419 unsigned int num_samples;
420 unsigned int bits_per_sample;
422 switch (s->type) {
423 case COMEDI_SUBD_DI:
424 case COMEDI_SUBD_DO:
425 case COMEDI_SUBD_DIO:
426 bits_per_sample = 8 * comedi_bytes_per_sample(s);
427 num_samples = DIV_ROUND_UP(cmd->scan_end_arg, bits_per_sample);
428 break;
429 default:
430 num_samples = cmd->scan_end_arg;
431 break;
433 return comedi_samples_to_bytes(s, num_samples);
435 EXPORT_SYMBOL_GPL(comedi_bytes_per_scan_cmd);
438 * comedi_bytes_per_scan() - Get length of asynchronous command "scan" in bytes
439 * @s: COMEDI subdevice.
441 * Determines the overall scan length according to the subdevice type and the
442 * number of channels in the scan for the current command.
444 * For digital input, output or input/output subdevices, samples for
445 * multiple channels are assumed to be packed into one or more unsigned
446 * short or unsigned int values according to the subdevice's %SDF_LSAMPL
447 * flag. For other types of subdevice, samples are assumed to occupy a
448 * whole unsigned short or unsigned int according to the %SDF_LSAMPL flag.
450 * Returns the overall scan length in bytes.
452 unsigned int comedi_bytes_per_scan(struct comedi_subdevice *s)
454 struct comedi_cmd *cmd = &s->async->cmd;
456 return comedi_bytes_per_scan_cmd(s, cmd);
458 EXPORT_SYMBOL_GPL(comedi_bytes_per_scan);
460 static unsigned int __comedi_nscans_left(struct comedi_subdevice *s,
461 unsigned int nscans)
463 struct comedi_async *async = s->async;
464 struct comedi_cmd *cmd = &async->cmd;
466 if (cmd->stop_src == TRIG_COUNT) {
467 unsigned int scans_left = 0;
469 if (async->scans_done < cmd->stop_arg)
470 scans_left = cmd->stop_arg - async->scans_done;
472 if (nscans > scans_left)
473 nscans = scans_left;
475 return nscans;
479 * comedi_nscans_left() - Return the number of scans left in the command
480 * @s: COMEDI subdevice.
481 * @nscans: The expected number of scans or 0 for all available scans.
483 * If @nscans is 0, it is set to the number of scans available in the
484 * async buffer.
486 * If the async command has a stop_src of %TRIG_COUNT, the @nscans will be
487 * checked against the number of scans remaining to complete the command.
489 * The return value will then be either the expected number of scans or the
490 * number of scans remaining to complete the command, whichever is fewer.
492 unsigned int comedi_nscans_left(struct comedi_subdevice *s,
493 unsigned int nscans)
495 if (nscans == 0) {
496 unsigned int nbytes = comedi_buf_read_n_available(s);
498 nscans = nbytes / comedi_bytes_per_scan(s);
500 return __comedi_nscans_left(s, nscans);
502 EXPORT_SYMBOL_GPL(comedi_nscans_left);
505 * comedi_nsamples_left() - Return the number of samples left in the command
506 * @s: COMEDI subdevice.
507 * @nsamples: The expected number of samples.
509 * Returns the number of samples remaining to complete the command, or the
510 * specified expected number of samples (@nsamples), whichever is fewer.
512 unsigned int comedi_nsamples_left(struct comedi_subdevice *s,
513 unsigned int nsamples)
515 struct comedi_async *async = s->async;
516 struct comedi_cmd *cmd = &async->cmd;
517 unsigned long long scans_left;
518 unsigned long long samples_left;
520 if (cmd->stop_src != TRIG_COUNT)
521 return nsamples;
523 scans_left = __comedi_nscans_left(s, cmd->stop_arg);
524 if (!scans_left)
525 return 0;
527 samples_left = scans_left * cmd->scan_end_arg -
528 comedi_bytes_to_samples(s, async->scan_progress);
530 if (samples_left < nsamples)
531 return samples_left;
532 return nsamples;
534 EXPORT_SYMBOL_GPL(comedi_nsamples_left);
537 * comedi_inc_scan_progress() - Update scan progress in asynchronous command
538 * @s: COMEDI subdevice.
539 * @num_bytes: Amount of data in bytes to increment scan progress.
541 * Increments the scan progress by the number of bytes specified by @num_bytes.
542 * If the scan progress reaches or exceeds the scan length in bytes, reduce
543 * it modulo the scan length in bytes and set the "end of scan" asynchronous
544 * event flag (%COMEDI_CB_EOS) to be processed later.
546 void comedi_inc_scan_progress(struct comedi_subdevice *s,
547 unsigned int num_bytes)
549 struct comedi_async *async = s->async;
550 struct comedi_cmd *cmd = &async->cmd;
551 unsigned int scan_length = comedi_bytes_per_scan(s);
553 /* track the 'cur_chan' for non-SDF_PACKED subdevices */
554 if (!(s->subdev_flags & SDF_PACKED)) {
555 async->cur_chan += comedi_bytes_to_samples(s, num_bytes);
556 async->cur_chan %= cmd->chanlist_len;
559 async->scan_progress += num_bytes;
560 if (async->scan_progress >= scan_length) {
561 unsigned int nscans = async->scan_progress / scan_length;
563 if (async->scans_done < (UINT_MAX - nscans))
564 async->scans_done += nscans;
565 else
566 async->scans_done = UINT_MAX;
568 async->scan_progress %= scan_length;
569 async->events |= COMEDI_CB_EOS;
572 EXPORT_SYMBOL_GPL(comedi_inc_scan_progress);
575 * comedi_handle_events() - Handle events and possibly stop acquisition
576 * @dev: COMEDI device.
577 * @s: COMEDI subdevice.
579 * Handles outstanding asynchronous acquisition event flags associated
580 * with the subdevice. Call the subdevice's @s->cancel() handler if the
581 * "end of acquisition", "error" or "overflow" event flags are set in order
582 * to stop the acquisition at the driver level.
584 * Calls comedi_event() to further process the event flags, which may mark
585 * the asynchronous command as no longer running, possibly terminated with
586 * an error, and may wake up tasks.
588 * Return a bit-mask of the handled events.
590 unsigned int comedi_handle_events(struct comedi_device *dev,
591 struct comedi_subdevice *s)
593 unsigned int events = s->async->events;
595 if (events == 0)
596 return events;
598 if ((events & COMEDI_CB_CANCEL_MASK) && s->cancel)
599 s->cancel(dev, s);
601 comedi_event(dev, s);
603 return events;
605 EXPORT_SYMBOL_GPL(comedi_handle_events);
607 static int insn_rw_emulate_bits(struct comedi_device *dev,
608 struct comedi_subdevice *s,
609 struct comedi_insn *insn,
610 unsigned int *data)
612 struct comedi_insn _insn;
613 unsigned int chan = CR_CHAN(insn->chanspec);
614 unsigned int base_chan = (chan < 32) ? 0 : chan;
615 unsigned int _data[2];
616 int ret;
618 memset(_data, 0, sizeof(_data));
619 memset(&_insn, 0, sizeof(_insn));
620 _insn.insn = INSN_BITS;
621 _insn.chanspec = base_chan;
622 _insn.n = 2;
623 _insn.subdev = insn->subdev;
625 if (insn->insn == INSN_WRITE) {
626 if (!(s->subdev_flags & SDF_WRITABLE))
627 return -EINVAL;
628 _data[0] = 1 << (chan - base_chan); /* mask */
629 _data[1] = data[0] ? (1 << (chan - base_chan)) : 0; /* bits */
632 ret = s->insn_bits(dev, s, &_insn, _data);
633 if (ret < 0)
634 return ret;
636 if (insn->insn == INSN_READ)
637 data[0] = (_data[1] >> (chan - base_chan)) & 1;
639 return 1;
642 static int __comedi_device_postconfig_async(struct comedi_device *dev,
643 struct comedi_subdevice *s)
645 struct comedi_async *async;
646 unsigned int buf_size;
647 int ret;
649 lockdep_assert_held(&dev->mutex);
650 if ((s->subdev_flags & (SDF_CMD_READ | SDF_CMD_WRITE)) == 0) {
651 dev_warn(dev->class_dev,
652 "async subdevices must support SDF_CMD_READ or SDF_CMD_WRITE\n");
653 return -EINVAL;
655 if (!s->do_cmdtest) {
656 dev_warn(dev->class_dev,
657 "async subdevices must have a do_cmdtest() function\n");
658 return -EINVAL;
660 if (!s->cancel)
661 dev_warn(dev->class_dev,
662 "async subdevices should have a cancel() function\n");
664 async = kzalloc(sizeof(*async), GFP_KERNEL);
665 if (!async)
666 return -ENOMEM;
668 init_waitqueue_head(&async->wait_head);
669 s->async = async;
671 async->max_bufsize = comedi_default_buf_maxsize_kb * 1024;
672 buf_size = comedi_default_buf_size_kb * 1024;
673 if (buf_size > async->max_bufsize)
674 buf_size = async->max_bufsize;
676 if (comedi_buf_alloc(dev, s, buf_size) < 0) {
677 dev_warn(dev->class_dev, "Buffer allocation failed\n");
678 return -ENOMEM;
680 if (s->buf_change) {
681 ret = s->buf_change(dev, s);
682 if (ret < 0)
683 return ret;
686 comedi_alloc_subdevice_minor(s);
688 return 0;
691 static int __comedi_device_postconfig(struct comedi_device *dev)
693 struct comedi_subdevice *s;
694 int ret;
695 int i;
697 lockdep_assert_held(&dev->mutex);
698 if (!dev->insn_device_config)
699 dev->insn_device_config = insn_device_inval;
701 if (!dev->get_valid_routes)
702 dev->get_valid_routes = get_zero_valid_routes;
704 for (i = 0; i < dev->n_subdevices; i++) {
705 s = &dev->subdevices[i];
707 if (s->type == COMEDI_SUBD_UNUSED)
708 continue;
710 if (s->type == COMEDI_SUBD_DO) {
711 if (s->n_chan < 32)
712 s->io_bits = (1 << s->n_chan) - 1;
713 else
714 s->io_bits = 0xffffffff;
717 if (s->len_chanlist == 0)
718 s->len_chanlist = 1;
720 if (s->do_cmd) {
721 ret = __comedi_device_postconfig_async(dev, s);
722 if (ret)
723 return ret;
726 if (!s->range_table && !s->range_table_list)
727 s->range_table = &range_unknown;
729 if (!s->insn_read && s->insn_bits)
730 s->insn_read = insn_rw_emulate_bits;
731 if (!s->insn_write && s->insn_bits)
732 s->insn_write = insn_rw_emulate_bits;
734 if (!s->insn_read)
735 s->insn_read = insn_inval;
736 if (!s->insn_write)
737 s->insn_write = insn_inval;
738 if (!s->insn_bits)
739 s->insn_bits = insn_inval;
740 if (!s->insn_config)
741 s->insn_config = insn_inval;
743 if (!s->poll)
744 s->poll = poll_invalid;
747 return 0;
750 /* do a little post-config cleanup */
751 static int comedi_device_postconfig(struct comedi_device *dev)
753 int ret;
755 lockdep_assert_held(&dev->mutex);
756 ret = __comedi_device_postconfig(dev);
757 if (ret < 0)
758 return ret;
759 down_write(&dev->attach_lock);
760 dev->attached = true;
761 up_write(&dev->attach_lock);
762 return 0;
766 * Generic recognize function for drivers that register their supported
767 * board names.
769 * 'driv->board_name' points to a 'const char *' member within the
770 * zeroth element of an array of some private board information
771 * structure, say 'struct foo_board' containing a member 'const char
772 * *board_name' that is initialized to point to a board name string that
773 * is one of the candidates matched against this function's 'name'
774 * parameter.
776 * 'driv->offset' is the size of the private board information
777 * structure, say 'sizeof(struct foo_board)', and 'driv->num_names' is
778 * the length of the array of private board information structures.
780 * If one of the board names in the array of private board information
781 * structures matches the name supplied to this function, the function
782 * returns a pointer to the pointer to the board name, otherwise it
783 * returns NULL. The return value ends up in the 'board_ptr' member of
784 * a 'struct comedi_device' that the low-level comedi driver's
785 * 'attach()' hook can convert to a point to a particular element of its
786 * array of private board information structures by subtracting the
787 * offset of the member that points to the board name. (No subtraction
788 * is required if the board name pointer is the first member of the
789 * private board information structure, which is generally the case.)
791 static void *comedi_recognize(struct comedi_driver *driv, const char *name)
793 char **name_ptr = (char **)driv->board_name;
794 int i;
796 for (i = 0; i < driv->num_names; i++) {
797 if (strcmp(*name_ptr, name) == 0)
798 return name_ptr;
799 name_ptr = (void *)name_ptr + driv->offset;
802 return NULL;
805 static void comedi_report_boards(struct comedi_driver *driv)
807 unsigned int i;
808 const char *const *name_ptr;
810 pr_info("comedi: valid board names for %s driver are:\n",
811 driv->driver_name);
813 name_ptr = driv->board_name;
814 for (i = 0; i < driv->num_names; i++) {
815 pr_info(" %s\n", *name_ptr);
816 name_ptr = (const char **)((char *)name_ptr + driv->offset);
819 if (driv->num_names == 0)
820 pr_info(" %s\n", driv->driver_name);
824 * comedi_load_firmware() - Request and load firmware for a device
825 * @dev: COMEDI device.
826 * @device: Hardware device.
827 * @name: The name of the firmware image.
828 * @cb: Callback to the upload the firmware image.
829 * @context: Private context from the driver.
831 * Sends a firmware request for the hardware device and waits for it. Calls
832 * the callback function to upload the firmware to the device, them releases
833 * the firmware.
835 * Returns 0 on success, -EINVAL if @cb is NULL, or a negative error number
836 * from the firmware request or the callback function.
838 int comedi_load_firmware(struct comedi_device *dev,
839 struct device *device,
840 const char *name,
841 int (*cb)(struct comedi_device *dev,
842 const u8 *data, size_t size,
843 unsigned long context),
844 unsigned long context)
846 const struct firmware *fw;
847 int ret;
849 if (!cb)
850 return -EINVAL;
852 ret = request_firmware(&fw, name, device);
853 if (ret == 0) {
854 ret = cb(dev, fw->data, fw->size, context);
855 release_firmware(fw);
858 return ret < 0 ? ret : 0;
860 EXPORT_SYMBOL_GPL(comedi_load_firmware);
863 * __comedi_request_region() - Request an I/O region for a legacy driver
864 * @dev: COMEDI device.
865 * @start: Base address of the I/O region.
866 * @len: Length of the I/O region.
868 * Requests the specified I/O port region which must start at a non-zero
869 * address.
871 * Returns 0 on success, -EINVAL if @start is 0, or -EIO if the request
872 * fails.
874 int __comedi_request_region(struct comedi_device *dev,
875 unsigned long start, unsigned long len)
877 if (!start) {
878 dev_warn(dev->class_dev,
879 "%s: a I/O base address must be specified\n",
880 dev->board_name);
881 return -EINVAL;
884 if (!request_region(start, len, dev->board_name)) {
885 dev_warn(dev->class_dev, "%s: I/O port conflict (%#lx,%lu)\n",
886 dev->board_name, start, len);
887 return -EIO;
890 return 0;
892 EXPORT_SYMBOL_GPL(__comedi_request_region);
895 * comedi_request_region() - Request an I/O region for a legacy driver
896 * @dev: COMEDI device.
897 * @start: Base address of the I/O region.
898 * @len: Length of the I/O region.
900 * Requests the specified I/O port region which must start at a non-zero
901 * address.
903 * On success, @dev->iobase is set to the base address of the region and
904 * @dev->iolen is set to its length.
906 * Returns 0 on success, -EINVAL if @start is 0, or -EIO if the request
907 * fails.
909 int comedi_request_region(struct comedi_device *dev,
910 unsigned long start, unsigned long len)
912 int ret;
914 ret = __comedi_request_region(dev, start, len);
915 if (ret == 0) {
916 dev->iobase = start;
917 dev->iolen = len;
920 return ret;
922 EXPORT_SYMBOL_GPL(comedi_request_region);
925 * comedi_legacy_detach() - A generic (*detach) function for legacy drivers
926 * @dev: COMEDI device.
928 * This is a simple, generic 'detach' handler for legacy COMEDI devices that
929 * just use a single I/O port region and possibly an IRQ and that don't need
930 * any special clean-up for their private device or subdevice storage. It
931 * can also be called by a driver-specific 'detach' handler.
933 * If @dev->irq is non-zero, the IRQ will be freed. If @dev->iobase and
934 * @dev->iolen are both non-zero, the I/O port region will be released.
936 void comedi_legacy_detach(struct comedi_device *dev)
938 if (dev->irq) {
939 free_irq(dev->irq, dev);
940 dev->irq = 0;
942 if (dev->iobase && dev->iolen) {
943 release_region(dev->iobase, dev->iolen);
944 dev->iobase = 0;
945 dev->iolen = 0;
948 EXPORT_SYMBOL_GPL(comedi_legacy_detach);
950 int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
952 struct comedi_driver *driv;
953 int ret;
955 lockdep_assert_held(&dev->mutex);
956 if (dev->attached)
957 return -EBUSY;
959 mutex_lock(&comedi_drivers_list_lock);
960 for (driv = comedi_drivers; driv; driv = driv->next) {
961 if (!try_module_get(driv->module))
962 continue;
963 if (driv->num_names) {
964 dev->board_ptr = comedi_recognize(driv, it->board_name);
965 if (dev->board_ptr)
966 break;
967 } else if (strcmp(driv->driver_name, it->board_name) == 0) {
968 break;
970 module_put(driv->module);
972 if (!driv) {
973 /* recognize has failed if we get here */
974 /* report valid board names before returning error */
975 for (driv = comedi_drivers; driv; driv = driv->next) {
976 if (!try_module_get(driv->module))
977 continue;
978 comedi_report_boards(driv);
979 module_put(driv->module);
981 ret = -EIO;
982 goto out;
984 if (!driv->attach) {
985 /* driver does not support manual configuration */
986 dev_warn(dev->class_dev,
987 "driver '%s' does not support attach using comedi_config\n",
988 driv->driver_name);
989 module_put(driv->module);
990 ret = -EIO;
991 goto out;
993 dev->driver = driv;
994 dev->board_name = dev->board_ptr ? *(const char **)dev->board_ptr
995 : dev->driver->driver_name;
996 ret = driv->attach(dev, it);
997 if (ret >= 0)
998 ret = comedi_device_postconfig(dev);
999 if (ret < 0) {
1000 comedi_device_detach(dev);
1001 module_put(driv->module);
1003 /* On success, the driver module count has been incremented. */
1004 out:
1005 mutex_unlock(&comedi_drivers_list_lock);
1006 return ret;
1010 * comedi_auto_config() - Create a COMEDI device for a hardware device
1011 * @hardware_device: Hardware device.
1012 * @driver: COMEDI low-level driver for the hardware device.
1013 * @context: Driver context for the auto_attach handler.
1015 * Allocates a new COMEDI device for the hardware device and calls the
1016 * low-level driver's 'auto_attach' handler to set-up the hardware and
1017 * allocate the COMEDI subdevices. Additional "post-configuration" setting
1018 * up is performed on successful return from the 'auto_attach' handler.
1019 * If the 'auto_attach' handler fails, the low-level driver's 'detach'
1020 * handler will be called as part of the clean-up.
1022 * This is usually called from a wrapper function in a bus-specific COMEDI
1023 * module, which in turn is usually called from a bus device 'probe'
1024 * function in the low-level driver.
1026 * Returns 0 on success, -EINVAL if the parameters are invalid or the
1027 * post-configuration determines the driver has set the COMEDI device up
1028 * incorrectly, -ENOMEM if failed to allocate memory, -EBUSY if run out of
1029 * COMEDI minor device numbers, or some negative error number returned by
1030 * the driver's 'auto_attach' handler.
1032 int comedi_auto_config(struct device *hardware_device,
1033 struct comedi_driver *driver, unsigned long context)
1035 struct comedi_device *dev;
1036 int ret;
1038 if (!hardware_device) {
1039 pr_warn("BUG! %s called with NULL hardware_device\n", __func__);
1040 return -EINVAL;
1042 if (!driver) {
1043 dev_warn(hardware_device,
1044 "BUG! %s called with NULL comedi driver\n", __func__);
1045 return -EINVAL;
1048 if (!driver->auto_attach) {
1049 dev_warn(hardware_device,
1050 "BUG! comedi driver '%s' has no auto_attach handler\n",
1051 driver->driver_name);
1052 return -EINVAL;
1055 dev = comedi_alloc_board_minor(hardware_device);
1056 if (IS_ERR(dev)) {
1057 dev_warn(hardware_device,
1058 "driver '%s' could not create device.\n",
1059 driver->driver_name);
1060 return PTR_ERR(dev);
1062 /* Note: comedi_alloc_board_minor() locked dev->mutex. */
1063 lockdep_assert_held(&dev->mutex);
1065 dev->driver = driver;
1066 dev->board_name = dev->driver->driver_name;
1067 ret = driver->auto_attach(dev, context);
1068 if (ret >= 0)
1069 ret = comedi_device_postconfig(dev);
1071 if (ret < 0) {
1072 dev_warn(hardware_device,
1073 "driver '%s' failed to auto-configure device.\n",
1074 driver->driver_name);
1075 mutex_unlock(&dev->mutex);
1076 comedi_release_hardware_device(hardware_device);
1077 } else {
1079 * class_dev should be set properly here
1080 * after a successful auto config
1082 dev_info(dev->class_dev,
1083 "driver '%s' has successfully auto-configured '%s'.\n",
1084 driver->driver_name, dev->board_name);
1085 mutex_unlock(&dev->mutex);
1087 return ret;
1089 EXPORT_SYMBOL_GPL(comedi_auto_config);
1092 * comedi_auto_unconfig() - Unconfigure auto-allocated COMEDI device
1093 * @hardware_device: Hardware device previously passed to
1094 * comedi_auto_config().
1096 * Cleans up and eventually destroys the COMEDI device allocated by
1097 * comedi_auto_config() for the same hardware device. As part of this
1098 * clean-up, the low-level COMEDI driver's 'detach' handler will be called.
1099 * (The COMEDI device itself will persist in an unattached state if it is
1100 * still open, until it is released, and any mmapped buffers will persist
1101 * until they are munmapped.)
1103 * This is usually called from a wrapper module in a bus-specific COMEDI
1104 * module, which in turn is usually set as the bus device 'remove' function
1105 * in the low-level COMEDI driver.
1107 void comedi_auto_unconfig(struct device *hardware_device)
1109 if (!hardware_device)
1110 return;
1111 comedi_release_hardware_device(hardware_device);
1113 EXPORT_SYMBOL_GPL(comedi_auto_unconfig);
1116 * comedi_driver_register() - Register a low-level COMEDI driver
1117 * @driver: Low-level COMEDI driver.
1119 * The low-level COMEDI driver is added to the list of registered COMEDI
1120 * drivers. This is used by the handler for the "/proc/comedi" file and is
1121 * also used by the handler for the %COMEDI_DEVCONFIG ioctl to configure
1122 * "legacy" COMEDI devices (for those low-level drivers that support it).
1124 * Returns 0.
1126 int comedi_driver_register(struct comedi_driver *driver)
1128 mutex_lock(&comedi_drivers_list_lock);
1129 driver->next = comedi_drivers;
1130 comedi_drivers = driver;
1131 mutex_unlock(&comedi_drivers_list_lock);
1133 return 0;
1135 EXPORT_SYMBOL_GPL(comedi_driver_register);
1138 * comedi_driver_unregister() - Unregister a low-level COMEDI driver
1139 * @driver: Low-level COMEDI driver.
1141 * The low-level COMEDI driver is removed from the list of registered COMEDI
1142 * drivers. Detaches any COMEDI devices attached to the driver, which will
1143 * result in the low-level driver's 'detach' handler being called for those
1144 * devices before this function returns.
1146 void comedi_driver_unregister(struct comedi_driver *driver)
1148 struct comedi_driver *prev;
1149 int i;
1151 /* unlink the driver */
1152 mutex_lock(&comedi_drivers_list_lock);
1153 if (comedi_drivers == driver) {
1154 comedi_drivers = driver->next;
1155 } else {
1156 for (prev = comedi_drivers; prev->next; prev = prev->next) {
1157 if (prev->next == driver) {
1158 prev->next = driver->next;
1159 break;
1163 mutex_unlock(&comedi_drivers_list_lock);
1165 /* check for devices using this driver */
1166 for (i = 0; i < COMEDI_NUM_BOARD_MINORS; i++) {
1167 struct comedi_device *dev = comedi_dev_get_from_minor(i);
1169 if (!dev)
1170 continue;
1172 mutex_lock(&dev->mutex);
1173 if (dev->attached && dev->driver == driver) {
1174 if (dev->use_count)
1175 dev_warn(dev->class_dev,
1176 "BUG! detaching device with use_count=%d\n",
1177 dev->use_count);
1178 comedi_device_detach(dev);
1180 mutex_unlock(&dev->mutex);
1181 comedi_dev_put(dev);
1184 EXPORT_SYMBOL_GPL(comedi_driver_unregister);