gpio: rcar: Fix runtime PM imbalance on error

[linux/fpc-iii.git] / drivers / staging / vt6656 / card.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
 * All rights reserved.
 *
 * File: card.c
 * Purpose: Provide functions to setup NIC operation mode
 * Functions:
 *      vnt_set_rspinf - Set RSPINF
 *      vnt_update_ifs - Update slotTime,SIFS,DIFS, and EIFS
 *      vnt_update_top_rates - Update BasicTopRate
 *      vnt_add_basic_rate - Add to BasicRateSet
 *      vnt_ofdm_min_rate - Check if any OFDM rate is in BasicRateSet
 *      vnt_get_tsf_offset - Calculate TSFOffset
 *      vnt_get_current_tsf - Read Current NIC TSF counter
 *      vnt_get_next_tbtt - Calculate Next Beacon TSF counter
 *      vnt_reset_next_tbtt - Set NIC Beacon time
 *      vnt_update_next_tbtt - Sync. NIC Beacon time
 *      vnt_radio_power_off - Turn Off NIC Radio Power
 *      vnt_radio_power_on - Turn On NIC Radio Power
 *
 * Revision History:
 *      06-10-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
 *      08-26-2003 Kyle Hsu:      Modify the definition type of dwIoBase.
 *      09-01-2003 Bryan YC Fan:  Add vnt_update_ifs().
 *
 */

#include <linux/bits.h>
#include "device.h"
#include "card.h"
#include "baseband.h"
#include "mac.h"
#include "desc.h"
#include "rf.h"
#include "power.h"
#include "key.h"
#include "usbpipe.h"

/* const u16 cw_rxbcntsf_off[MAX_RATE] =
 *   {17, 34, 96, 192, 34, 23, 17, 11, 8, 5, 4, 3};
 */

static const u16 cw_rxbcntsf_off[MAX_RATE] = {
        192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3
};

/*
 * Description: Set NIC media channel
 *
 * Parameters:
 *  In:
 *      pDevice             - The adapter to be set
 *      connection_channel  - Channel to be set
 *  Out:
 *      none
 */
void vnt_set_channel(struct vnt_private *priv, u32 connection_channel)
{
        if (connection_channel > CB_MAX_CHANNEL || !connection_channel)
                return;

        /* clear NAV */
        vnt_mac_reg_bits_on(priv, MAC_REG_MACCR, MACCR_CLRNAV);

        /* Set Channel[7] = 0 to tell H/W channel is changing now. */
        vnt_mac_reg_bits_off(priv, MAC_REG_CHANNEL,
                             (BIT(7) | BIT(5) | BIT(4)));

        vnt_control_out(priv, MESSAGE_TYPE_SELECT_CHANNEL,
                        connection_channel, 0, 0, NULL);

        vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG, MAC_REG_CHANNEL,
                           (u8)(connection_channel | 0x80));
}

/*
 * Description: Get CCK mode basic rate
 *
 * Parameters:
 *  In:
 *      priv            - The adapter to be set
 *      rate_idx        - Receiving data rate
 *  Out:
 *      none
 *
 * Return Value: response Control frame rate
 *
 */
static u16 vnt_get_cck_rate(struct vnt_private *priv, u16 rate_idx)
{
        u16 ui = rate_idx;

        while (ui > RATE_1M) {
                if (priv->basic_rates & (1 << ui))
                        return ui;
                ui--;
        }

        return RATE_1M;
}

/*
 * Description: Get OFDM mode basic rate
 *
 * Parameters:
 *  In:
 *      priv            - The adapter to be set
 *      rate_idx        - Receiving data rate
 *  Out:
 *      none
 *
 * Return Value: response Control frame rate
 *
 */
static u16 vnt_get_ofdm_rate(struct vnt_private *priv, u16 rate_idx)
{
        u16 ui = rate_idx;

        dev_dbg(&priv->usb->dev, "%s basic rate: %d\n",
                __func__,  priv->basic_rates);

        if (!vnt_ofdm_min_rate(priv)) {
                dev_dbg(&priv->usb->dev, "%s (NO OFDM) %d\n",
                        __func__, rate_idx);
                if (rate_idx > RATE_24M)
                        rate_idx = RATE_24M;
                return rate_idx;
        }

        while (ui > RATE_11M) {
                if (priv->basic_rates & (1 << ui)) {
                        dev_dbg(&priv->usb->dev, "%s rate: %d\n",
                                __func__, ui);
                        return ui;
                }
                ui--;
        }

        dev_dbg(&priv->usb->dev, "%s basic rate: 24M\n", __func__);

        return RATE_24M;
}

/*
 * Description: Calculate TxRate and RsvTime fields for RSPINF in OFDM mode.
 *
 * Parameters:
 * In:
 *      rate    - Tx Rate
 *      bb_type - Tx Packet type
 * Out:
 *      tx_rate - pointer to RSPINF TxRate field
 *      rsv_time- pointer to RSPINF RsvTime field
 *
 * Return Value: none
 *
 */
static void vnt_calculate_ofdm_rate(u16 rate, u8 bb_type,
                                    u8 *tx_rate, u8 *rsv_time)
{
        switch (rate) {
        case RATE_6M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x9b;
                        *rsv_time = 24;
                } else {
                        *tx_rate = 0x8b;
                        *rsv_time = 30;
                }
                break;
        case RATE_9M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x9f;
                        *rsv_time = 16;
                } else {
                        *tx_rate = 0x8f;
                        *rsv_time = 22;
                }
                break;
        case RATE_12M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x9a;
                        *rsv_time = 12;
                } else {
                        *tx_rate = 0x8a;
                        *rsv_time = 18;
                }
                break;
        case RATE_18M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x9e;
                        *rsv_time = 8;
                } else {
                        *tx_rate = 0x8e;
                        *rsv_time = 14;
                }
                break;
        case RATE_36M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x9d;
                        *rsv_time = 4;
                } else {
                        *tx_rate = 0x8d;
                        *rsv_time = 10;
                }
                break;
        case RATE_48M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x98;
                        *rsv_time = 4;
                } else {
                        *tx_rate = 0x88;
                        *rsv_time = 10;
                }
                break;
        case RATE_54M:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x9c;
                        *rsv_time = 4;
                } else {
                        *tx_rate = 0x8c;
                        *rsv_time = 10;
                }
                break;
        case RATE_24M:
        default:
                if (bb_type == BB_TYPE_11A) {
                        *tx_rate = 0x99;
                        *rsv_time = 8;
                } else {
                        *tx_rate = 0x89;
                        *rsv_time = 14;
                }
                break;
        }
}

/*
 * Description: Set RSPINF
 *
 * Parameters:
 *  In:
 *      pDevice             - The adapter to be set
 *  Out:
 *      none
 *
 * Return Value: None.
 *
 */

void vnt_set_rspinf(struct vnt_private *priv, u8 bb_type)
{
        struct vnt_phy_field phy[4];
        u8 tx_rate[9] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; /* For OFDM */
        u8 rsv_time[9] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
        u8 data[34];
        int i;

        /*RSPINF_b_1*/
        vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_1M),
                          PK_TYPE_11B, &phy[0]);

        /*RSPINF_b_2*/
        vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_2M),
                          PK_TYPE_11B, &phy[1]);

        /*RSPINF_b_5*/
        vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_5M),
                          PK_TYPE_11B, &phy[2]);

        /*RSPINF_b_11*/
        vnt_get_phy_field(priv, 14, vnt_get_cck_rate(priv, RATE_11M),
                          PK_TYPE_11B, &phy[3]);

        /*RSPINF_a_6*/
        vnt_calculate_ofdm_rate(RATE_6M, bb_type, &tx_rate[0], &rsv_time[0]);

        /*RSPINF_a_9*/
        vnt_calculate_ofdm_rate(RATE_9M, bb_type, &tx_rate[1], &rsv_time[1]);

        /*RSPINF_a_12*/
        vnt_calculate_ofdm_rate(RATE_12M, bb_type, &tx_rate[2], &rsv_time[2]);

        /*RSPINF_a_18*/
        vnt_calculate_ofdm_rate(RATE_18M, bb_type, &tx_rate[3], &rsv_time[3]);

        /*RSPINF_a_24*/
        vnt_calculate_ofdm_rate(RATE_24M, bb_type, &tx_rate[4], &rsv_time[4]);

        /*RSPINF_a_36*/
        vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_36M),
                                bb_type, &tx_rate[5], &rsv_time[5]);

        /*RSPINF_a_48*/
        vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_48M),
                                bb_type, &tx_rate[6], &rsv_time[6]);

        /*RSPINF_a_54*/
        vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M),
                                bb_type, &tx_rate[7], &rsv_time[7]);

        /*RSPINF_a_72*/
        vnt_calculate_ofdm_rate(vnt_get_ofdm_rate(priv, RATE_54M),
                                bb_type, &tx_rate[8], &rsv_time[8]);

        put_unaligned(phy[0].len, (u16 *)&data[0]);
        data[2] = phy[0].signal;
        data[3] = phy[0].service;

        put_unaligned(phy[1].len, (u16 *)&data[4]);
        data[6] = phy[1].signal;
        data[7] = phy[1].service;

        put_unaligned(phy[2].len, (u16 *)&data[8]);
        data[10] = phy[2].signal;
        data[11] = phy[2].service;

        put_unaligned(phy[3].len, (u16 *)&data[12]);
        data[14] = phy[3].signal;
        data[15] = phy[3].service;

        for (i = 0; i < 9; i++) {
                data[16 + i * 2] = tx_rate[i];
                data[16 + i * 2 + 1] = rsv_time[i];
        }

        vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_B_1,
                        MESSAGE_REQUEST_MACREG, 34, &data[0]);
}

/*
 * Description: Update IFS
 *
 * Parameters:
 *  In:
 *      priv - The adapter to be set
 * Out:
 *      none
 *
 * Return Value: None.
 *
 */
void vnt_update_ifs(struct vnt_private *priv)
{
        u8 max_min = 0;
        u8 data[4];

        if (priv->packet_type == PK_TYPE_11A) {
                priv->slot = C_SLOT_SHORT;
                priv->sifs = C_SIFS_A;
                priv->difs = C_SIFS_A + 2 * C_SLOT_SHORT;
                max_min = 4;
        } else {
                priv->sifs = C_SIFS_BG;

                if (priv->short_slot_time) {
                        priv->slot = C_SLOT_SHORT;
                        max_min = 4;
                } else {
                        priv->slot = C_SLOT_LONG;
                        max_min = 5;
                }

                priv->difs = C_SIFS_BG + 2 * priv->slot;
        }

        priv->eifs = C_EIFS;

        switch (priv->rf_type) {
        case RF_VT3226D0:
                if (priv->bb_type != BB_TYPE_11B) {
                        priv->sifs -= 1;
                        priv->difs -= 1;
                        break;
                }
                /* fall through */
        case RF_AIROHA7230:
        case RF_AL2230:
        case RF_AL2230S:
                if (priv->bb_type != BB_TYPE_11B)
                        break;
                /* fall through */
        case RF_RFMD2959:
        case RF_VT3226:
        case RF_VT3342A0:
                priv->sifs -= 3;
                priv->difs -= 3;
                break;
        case RF_MAXIM2829:
                if (priv->bb_type == BB_TYPE_11A) {
                        priv->sifs -= 5;
                        priv->difs -= 5;
                } else {
                        priv->sifs -= 2;
                        priv->difs -= 2;
                }

                break;
        }

        data[0] = (u8)priv->sifs;
        data[1] = (u8)priv->difs;
        data[2] = (u8)priv->eifs;
        data[3] = (u8)priv->slot;

        vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_SIFS,
                        MESSAGE_REQUEST_MACREG, 4, &data[0]);

        max_min |= 0xa0;

        vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_CWMAXMIN0,
                        MESSAGE_REQUEST_MACREG, 1, &max_min);
}

void vnt_update_top_rates(struct vnt_private *priv)
{
        u8 top_ofdm = RATE_24M, top_cck = RATE_1M;
        u8 i;

        /*Determines the highest basic rate.*/
        for (i = RATE_54M; i >= RATE_6M; i--) {
                if (priv->basic_rates & (u16)(1 << i)) {
                        top_ofdm = i;
                        break;
                }
        }

        priv->top_ofdm_basic_rate = top_ofdm;

        for (i = RATE_11M;; i--) {
                if (priv->basic_rates & (u16)(1 << i)) {
                        top_cck = i;
                        break;
                }
                if (i == RATE_1M)
                        break;
        }

        priv->top_cck_basic_rate = top_cck;
}

int vnt_ofdm_min_rate(struct vnt_private *priv)
{
        int ii;

        for (ii = RATE_54M; ii >= RATE_6M; ii--) {
                if ((priv->basic_rates) & ((u16)BIT(ii)))
                        return true;
        }

        return false;
}

u8 vnt_get_pkt_type(struct vnt_private *priv)
{
        if (priv->bb_type == BB_TYPE_11A || priv->bb_type == BB_TYPE_11B)
                return (u8)priv->bb_type;
        else if (vnt_ofdm_min_rate(priv))
                return PK_TYPE_11GA;
        return PK_TYPE_11GB;
}

/*
 * Description: Calculate TSF offset of two TSF input
 *              Get TSF Offset from RxBCN's TSF and local TSF
 *
 * Parameters:
 *  In:
 *      rx_rate - rx rate.
 *      tsf1    - Rx BCN's TSF
 *      tsf2    - Local TSF
 *  Out:
 *      none
 *
 * Return Value: TSF Offset value
 *
 */
u64 vnt_get_tsf_offset(u8 rx_rate, u64 tsf1, u64 tsf2)
{
        return tsf1 - tsf2 - (u64)cw_rxbcntsf_off[rx_rate % MAX_RATE];
}

/*
 * Description: Sync. TSF counter to BSS
 *              Get TSF offset and write to HW
 *
 * Parameters:
 *  In:
 *      priv            - The adapter to be sync.
 *      time_stamp      - Rx BCN's TSF
 *      local_tsf       - Local TSF
 *  Out:
 *      none
 *
 * Return Value: none
 *
 */
void vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
                    u64 time_stamp, u64 local_tsf)
{
        u64 tsf_offset = 0;
        u8 data[8];

        tsf_offset = vnt_get_tsf_offset(rx_rate, time_stamp, local_tsf);

        data[0] = (u8)tsf_offset;
        data[1] = (u8)(tsf_offset >> 8);
        data[2] = (u8)(tsf_offset >> 16);
        data[3] = (u8)(tsf_offset >> 24);
        data[4] = (u8)(tsf_offset >> 32);
        data[5] = (u8)(tsf_offset >> 40);
        data[6] = (u8)(tsf_offset >> 48);
        data[7] = (u8)(tsf_offset >> 56);

        vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
                        MESSAGE_REQUEST_TSF, 0, 8, data);
}

/*
 * Description: Read NIC TSF counter
 *              Get local TSF counter
 *
 * Parameters:
 *  In:
 *      priv            - The adapter to be read
 *  Out:
 *      current_tsf     - Current TSF counter
 *
 * Return Value: true if success; otherwise false
 *
 */
bool vnt_get_current_tsf(struct vnt_private *priv, u64 *current_tsf)
{
        *current_tsf = priv->current_tsf;

        return true;
}

/*
 * Description: Clear NIC TSF counter
 *              Clear local TSF counter
 *
 * Parameters:
 *  In:
 *      priv    - The adapter to be read
 *
 * Return Value: true if success; otherwise false
 *
 */
bool vnt_clear_current_tsf(struct vnt_private *priv)
{
        vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL, TFTCTL_TSFCNTRST);

        priv->current_tsf = 0;

        return true;
}

/*
 * Description: Read NIC TSF counter
 *              Get NEXTTBTT from adjusted TSF and Beacon Interval
 *
 * Parameters:
 *  In:
 *      tsf             - Current TSF counter
 *      beacon_interval - Beacon Interval
 *  Out:
 *      tsf             - Current TSF counter
 *
 * Return Value: TSF value of next Beacon
 *
 */
u64 vnt_get_next_tbtt(u64 tsf, u16 beacon_interval)
{
        u32 beacon_int;

        beacon_int = beacon_interval * 1024;

        /* Next TBTT =
         *      ((local_current_TSF / beacon_interval) + 1) * beacon_interval
         */
        if (beacon_int) {
                do_div(tsf, beacon_int);
                tsf += 1;
                tsf *= beacon_int;
        }

        return tsf;
}

/*
 * Description: Set NIC TSF counter for first Beacon time
 *              Get NEXTTBTT from adjusted TSF and Beacon Interval
 *
 * Parameters:
 *  In:
 *      dwIoBase        - IO Base
 *      beacon_interval - Beacon Interval
 *  Out:
 *      none
 *
 * Return Value: none
 *
 */
void vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval)
{
        u64 next_tbtt = 0;
        u8 data[8];

        vnt_clear_current_tsf(priv);

        next_tbtt = vnt_get_next_tbtt(next_tbtt, beacon_interval);

        data[0] = (u8)next_tbtt;
        data[1] = (u8)(next_tbtt >> 8);
        data[2] = (u8)(next_tbtt >> 16);
        data[3] = (u8)(next_tbtt >> 24);
        data[4] = (u8)(next_tbtt >> 32);
        data[5] = (u8)(next_tbtt >> 40);
        data[6] = (u8)(next_tbtt >> 48);
        data[7] = (u8)(next_tbtt >> 56);

        vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
                        MESSAGE_REQUEST_TBTT, 0, 8, data);
}

/*
 * Description: Sync NIC TSF counter for Beacon time
 *              Get NEXTTBTT and write to HW
 *
 * Parameters:
 *  In:
 *      priv            - The adapter to be set
 *      tsf             - Current TSF counter
 *      beacon_interval - Beacon Interval
 *  Out:
 *      none
 *
 * Return Value: none
 *
 */
void vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
                          u16 beacon_interval)
{
        u8 data[8];

        tsf = vnt_get_next_tbtt(tsf, beacon_interval);

        data[0] = (u8)tsf;
        data[1] = (u8)(tsf >> 8);
        data[2] = (u8)(tsf >> 16);
        data[3] = (u8)(tsf >> 24);
        data[4] = (u8)(tsf >> 32);
        data[5] = (u8)(tsf >> 40);
        data[6] = (u8)(tsf >> 48);
        data[7] = (u8)(tsf >> 56);

        vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
                        MESSAGE_REQUEST_TBTT, 0, 8, data);

        dev_dbg(&priv->usb->dev, "%s TBTT: %8llx\n", __func__, tsf);
}

/*
 * Description: Turn off Radio power
 *
 * Parameters:
 *  In:
 *      priv         - The adapter to be turned off
 *  Out:
 *      none
 *
 * Return Value: true if success; otherwise false
 *
 */
int vnt_radio_power_off(struct vnt_private *priv)
{
        int ret = 0;

        switch (priv->rf_type) {
        case RF_AL2230:
        case RF_AL2230S:
        case RF_AIROHA7230:
        case RF_VT3226:
        case RF_VT3226D0:
        case RF_VT3342A0:
                ret = vnt_mac_reg_bits_off(priv, MAC_REG_SOFTPWRCTL,
                                        (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3));
                break;
        }

        if (ret)
                goto end;

        ret = vnt_mac_reg_bits_off(priv, MAC_REG_HOSTCR, HOSTCR_RXON);
        if (ret)
                goto end;

        ret = vnt_set_deep_sleep(priv);
        if (ret)
                goto end;

        ret = vnt_mac_reg_bits_on(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD);

end:
        return ret;
}

/*
 * Description: Turn on Radio power
 *
 * Parameters:
 *  In:
 *      priv         - The adapter to be turned on
 *  Out:
 *      none
 *
 * Return Value: true if success; otherwise false
 *
 */
int vnt_radio_power_on(struct vnt_private *priv)
{
        int ret = 0;

        vnt_exit_deep_sleep(priv);

        vnt_mac_reg_bits_on(priv, MAC_REG_HOSTCR, HOSTCR_RXON);

        switch (priv->rf_type) {
        case RF_AL2230:
        case RF_AL2230S:
        case RF_AIROHA7230:
        case RF_VT3226:
        case RF_VT3226D0:
        case RF_VT3342A0:
                vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL,
                                    (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3));
                break;
        }

        vnt_mac_reg_bits_off(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD);

        return ret;
}

void vnt_set_bss_mode(struct vnt_private *priv)
{
        if (priv->rf_type == RF_AIROHA7230 && priv->bb_type == BB_TYPE_11A)
                vnt_mac_set_bb_type(priv, BB_TYPE_11G);
        else
                vnt_mac_set_bb_type(priv, priv->bb_type);

        priv->packet_type = vnt_get_pkt_type(priv);

        if (priv->bb_type == BB_TYPE_11A)
                vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x03);
        else if (priv->bb_type == BB_TYPE_11B)
                vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x02);
        else if (priv->bb_type == BB_TYPE_11G)
                vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG, 0x88, 0x08);

        vnt_update_ifs(priv);
        vnt_set_rspinf(priv, (u8)priv->bb_type);

        if (priv->bb_type == BB_TYPE_11A) {
                if (priv->rf_type == RF_AIROHA7230) {
                        priv->bb_vga[0] = 0x20;

                        vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
                                           0xe7, priv->bb_vga[0]);
                }

                priv->bb_vga[2] = 0x10;
                priv->bb_vga[3] = 0x10;
        } else {
                if (priv->rf_type == RF_AIROHA7230) {
                        priv->bb_vga[0] = 0x1c;

                        vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
                                           0xe7, priv->bb_vga[0]);
                }

                priv->bb_vga[2] = 0x0;
                priv->bb_vga[3] = 0x0;
        }

        vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
}