drivers/watchdog/nv_tco.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  *      nv_tco: TCO timer driver for nVidia chipsets.
   4  *
   5  *      (c) Copyright 2005 Google Inc., All Rights Reserved.
   6  *
   7  *      Supported Chipsets:
   8  *              - MCP51/MCP55
   9  *
  10  *      (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
  11  *      Reserved.
  12  *                              http://www.kernelconcepts.de
  13  *
  14  *      Neither kernel concepts nor Nils Faerber admit liability nor provide
  15  *      warranty for any of this software. This material is provided
  16  *      "AS-IS" and at no charge.
  17  *
  18  *      (c) Copyright 2000      kernel concepts <nils@kernelconcepts.de>
  19  *                              developed for
  20  *                              Jentro AG, Haar/Munich (Germany)
  21  *
  22  *      TCO timer driver for NV chipsets
  23  *      based on softdog.c by Alan Cox <alan@redhat.com>
  24  */
  25
  26 /*
  27  * Some address definitions for the TCO
  28  */
  29
  30 #define TCO_RLD(base)   ((base) + 0x00) /* TCO Timer Reload and Current Value */
  31 #define TCO_TMR(base)   ((base) + 0x01) /* TCO Timer Initial Value      */
  32
  33 #define TCO_STS(base)   ((base) + 0x04) /* TCO Status Register          */
  34 /*
  35  * TCO Boot Status bit: set on TCO reset, reset by software or standby
  36  * power-good (survives reboots), unfortunately this bit is never
  37  * set.
  38  */
  39 #  define TCO_STS_BOOT_STS      (1 << 9)
  40 /*
  41  * first and 2nd timeout status bits, these also survive a warm boot,
  42  * and they work, so we use them.
  43  */
  44 #  define TCO_STS_TCO_INT_STS   (1 << 1)
  45 #  define TCO_STS_TCO2TO_STS    (1 << 10)
  46 #  define TCO_STS_RESET         (TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \
  47                                  TCO_STS_TCO_INT_STS)
  48
  49 #define TCO_CNT(base)   ((base) + 0x08) /* TCO Control Register */
  50 #  define TCO_CNT_TCOHALT       (1 << 12)
  51
  52 #define MCP51_SMBUS_SETUP_B 0xe8
  53 #  define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25)
  54
  55 /*
  56  * The SMI_EN register is at the base io address + 0x04,
  57  * while TCOBASE is + 0x40.
  58  */
  59 #define MCP51_SMI_EN(base)      ((base) - 0x40 + 0x04)
  60 #  define MCP51_SMI_EN_TCO      ((1 << 4) | (1 << 5))