2 * net/tipc/net.c: TIPC network routing code
4 * Copyright (c) 1995-2006, 2014, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
39 #include "name_distr.h"
47 * The TIPC locking policy is designed to ensure a very fine locking
48 * granularity, permitting complete parallel access to individual
49 * port and node/link instances. The code consists of four major
50 * locking domains, each protected with their own disjunct set of locks.
52 * 1: The bearer level.
53 * RTNL lock is used to serialize the process of configuring bearer
54 * on update side, and RCU lock is applied on read side to make
55 * bearer instance valid on both paths of message transmission and
58 * 2: The node and link level.
59 * All node instances are saved into two tipc_node_list and node_htable
60 * lists. The two lists are protected by node_list_lock on write side,
61 * and they are guarded with RCU lock on read side. Especially node
62 * instance is destroyed only when TIPC module is removed, and we can
63 * confirm that there has no any user who is accessing the node at the
64 * moment. Therefore, Except for iterating the two lists within RCU
65 * protection, it's no needed to hold RCU that we access node instance
68 * In addition, all members in node structure including link instances
69 * are protected by node spin lock.
71 * 3: The transport level of the protocol.
72 * This consists of the structures port, (and its user level
73 * representations, such as user_port and tipc_sock), reference and
74 * tipc_user (port.c, reg.c, socket.c).
76 * This layer has four different locks:
77 * - The tipc_port spin_lock. This is protecting each port instance
78 * from parallel data access and removal. Since we can not place
79 * this lock in the port itself, it has been placed in the
80 * corresponding reference table entry, which has the same life
81 * cycle as the module. This entry is difficult to access from
82 * outside the TIPC core, however, so a pointer to the lock has
83 * been added in the port instance, -to be used for unlocking
85 * - A read/write lock to protect the reference table itself (teg.c).
86 * (Nobody is using read-only access to this, so it can just as
87 * well be changed to a spin_lock)
88 * - A spin lock to protect the registry of kernel/driver users (reg.c)
89 * - A global spin_lock (tipc_port_lock), which only task is to ensure
90 * consistency where more than one port is involved in an operation,
91 * i.e., whe a port is part of a linked list of ports.
92 * There are two such lists; 'port_list', which is used for management,
93 * and 'wait_list', which is used to queue ports during congestion.
95 * 4: The name table (name_table.c, name_distr.c, subscription.c)
96 * - There is one big read/write-lock (tipc_nametbl_lock) protecting the
97 * overall name table structure. Nothing must be added/removed to
98 * this structure without holding write access to it.
99 * - There is one local spin_lock per sub_sequence, which can be seen
100 * as a sub-domain to the tipc_nametbl_lock domain. It is used only
101 * for translation operations, and is needed because a translation
102 * steps the root of the 'publication' linked list between each lookup.
103 * This is always used within the scope of a tipc_nametbl_lock(read).
104 * - A local spin_lock protecting the queue of subscriber events.
107 struct tipc_net_work
{
108 struct work_struct work
;
113 static void tipc_net_finalize(struct net
*net
, u32 addr
);
115 int tipc_net_init(struct net
*net
, u8
*node_id
, u32 addr
)
117 if (tipc_own_id(net
)) {
118 pr_info("Cannot configure node identity twice\n");
121 pr_info("Started in network mode\n");
124 tipc_set_node_id(net
, node_id
);
126 tipc_net_finalize(net
, addr
);
130 static void tipc_net_finalize(struct net
*net
, u32 addr
)
132 struct tipc_net
*tn
= tipc_net(net
);
134 if (cmpxchg(&tn
->node_addr
, 0, addr
))
136 tipc_set_node_addr(net
, addr
);
137 tipc_named_reinit(net
);
139 tipc_nametbl_publish(net
, TIPC_CFG_SRV
, addr
, addr
,
140 TIPC_CLUSTER_SCOPE
, 0, addr
);
143 static void tipc_net_finalize_work(struct work_struct
*work
)
145 struct tipc_net_work
*fwork
;
147 fwork
= container_of(work
, struct tipc_net_work
, work
);
148 tipc_net_finalize(fwork
->net
, fwork
->addr
);
152 void tipc_sched_net_finalize(struct net
*net
, u32 addr
)
154 struct tipc_net_work
*fwork
= kzalloc(sizeof(*fwork
), GFP_ATOMIC
);
158 INIT_WORK(&fwork
->work
, tipc_net_finalize_work
);
161 schedule_work(&fwork
->work
);
164 void tipc_net_stop(struct net
*net
)
166 if (!tipc_own_id(net
))
170 tipc_bearer_stop(net
);
174 pr_info("Left network mode\n");
177 static int __tipc_nl_add_net(struct net
*net
, struct tipc_nl_msg
*msg
)
179 struct tipc_net
*tn
= net_generic(net
, tipc_net_id
);
180 u64
*w0
= (u64
*)&tn
->node_id
[0];
181 u64
*w1
= (u64
*)&tn
->node_id
[8];
182 struct nlattr
*attrs
;
185 hdr
= genlmsg_put(msg
->skb
, msg
->portid
, msg
->seq
, &tipc_genl_family
,
186 NLM_F_MULTI
, TIPC_NL_NET_GET
);
190 attrs
= nla_nest_start(msg
->skb
, TIPC_NLA_NET
);
194 if (nla_put_u32(msg
->skb
, TIPC_NLA_NET_ID
, tn
->net_id
))
196 if (nla_put_u64_64bit(msg
->skb
, TIPC_NLA_NET_NODEID
, *w0
, 0))
198 if (nla_put_u64_64bit(msg
->skb
, TIPC_NLA_NET_NODEID_W1
, *w1
, 0))
200 nla_nest_end(msg
->skb
, attrs
);
201 genlmsg_end(msg
->skb
, hdr
);
206 nla_nest_cancel(msg
->skb
, attrs
);
208 genlmsg_cancel(msg
->skb
, hdr
);
213 int tipc_nl_net_dump(struct sk_buff
*skb
, struct netlink_callback
*cb
)
215 struct net
*net
= sock_net(skb
->sk
);
217 int done
= cb
->args
[0];
218 struct tipc_nl_msg msg
;
224 msg
.portid
= NETLINK_CB(cb
->skb
).portid
;
225 msg
.seq
= cb
->nlh
->nlmsg_seq
;
227 err
= __tipc_nl_add_net(net
, &msg
);
238 int __tipc_nl_net_set(struct sk_buff
*skb
, struct genl_info
*info
)
240 struct nlattr
*attrs
[TIPC_NLA_NET_MAX
+ 1];
241 struct net
*net
= sock_net(skb
->sk
);
242 struct tipc_net
*tn
= tipc_net(net
);
245 if (!info
->attrs
[TIPC_NLA_NET
])
248 err
= nla_parse_nested(attrs
, TIPC_NLA_NET_MAX
,
249 info
->attrs
[TIPC_NLA_NET
], tipc_nl_net_policy
,
255 /* Can't change net id once TIPC has joined a network */
256 if (tipc_own_addr(net
))
259 if (attrs
[TIPC_NLA_NET_ID
]) {
262 val
= nla_get_u32(attrs
[TIPC_NLA_NET_ID
]);
263 if (val
< 1 || val
> 9999)
269 if (attrs
[TIPC_NLA_NET_ADDR
]) {
272 addr
= nla_get_u32(attrs
[TIPC_NLA_NET_ADDR
]);
275 tn
->legacy_addr_format
= true;
276 tipc_net_init(net
, NULL
, addr
);
279 if (attrs
[TIPC_NLA_NET_NODEID
]) {
280 u8 node_id
[NODE_ID_LEN
];
281 u64
*w0
= (u64
*)&node_id
[0];
282 u64
*w1
= (u64
*)&node_id
[8];
284 if (!attrs
[TIPC_NLA_NET_NODEID_W1
])
286 *w0
= nla_get_u64(attrs
[TIPC_NLA_NET_NODEID
]);
287 *w1
= nla_get_u64(attrs
[TIPC_NLA_NET_NODEID_W1
]);
288 tipc_net_init(net
, node_id
, 0);
293 int tipc_nl_net_set(struct sk_buff
*skb
, struct genl_info
*info
)
298 err
= __tipc_nl_net_set(skb
, info
);