drivers/media/rc/ene_ir.h

   1 /*
   2  * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
   3  *
   4  * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of the
   9  * License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful, but
  12  * WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * General Public License for more details.
  15  */
  16 #include <linux/spinlock.h>
  17
  18
  19 /* hardware address */
  20 #define ENE_STATUS              0       /* hardware status - unused */
  21 #define ENE_ADDR_HI             1       /* hi byte of register address */
  22 #define ENE_ADDR_LO             2       /* low byte of register address */
  23 #define ENE_IO                  3       /* read/write window */
  24 #define ENE_IO_SIZE             4
  25
  26 /* 8 bytes of samples, divided in 2 packets*/
  27 #define ENE_FW_SAMPLE_BUFFER    0xF8F0  /* sample buffer */
  28 #define ENE_FW_SAMPLE_SPACE     0x80    /* sample is space */
  29 #define ENE_FW_PACKET_SIZE      4
  30
  31 /* first firmware flag register */
  32 #define ENE_FW1                 0xF8F8  /* flagr */
  33 #define ENE_FW1_ENABLE          0x01    /* enable fw processing */
  34 #define ENE_FW1_TXIRQ           0x02    /* TX interrupt pending */
  35 #define ENE_FW1_HAS_EXTRA_BUF   0x04    /* fw uses extra buffer*/
  36 #define ENE_FW1_EXTRA_BUF_HND   0x08    /* extra buffer handshake bit*/
  37 #define ENE_FW1_LED_ON          0x10    /* turn on a led */
  38
  39 #define ENE_FW1_WPATTERN        0x20    /* enable wake pattern */
  40 #define ENE_FW1_WAKE            0x40    /* enable wake from S3 */
  41 #define ENE_FW1_IRQ             0x80    /* enable interrupt */
  42
  43 /* second firmware flag register */
  44 #define ENE_FW2                 0xF8F9  /* flagw */
  45 #define ENE_FW2_BUF_WPTR        0x01    /* which half of the buffer to read */
  46 #define ENE_FW2_RXIRQ           0x04    /* RX IRQ pending*/
  47 #define ENE_FW2_GP0A            0x08    /* Use GPIO0A for demodulated input */
  48 #define ENE_FW2_EMMITER1_CONN   0x10    /* TX emmiter 1 connected */
  49 #define ENE_FW2_EMMITER2_CONN   0x20    /* TX emmiter 2 connected */
  50
  51 #define ENE_FW2_FAN_INPUT       0x40    /* fan input used for demodulated data*/
  52 #define ENE_FW2_LEARNING        0x80    /* hardware supports learning and TX */
  53
  54 /* firmware RX pointer for new style buffer */
  55 #define ENE_FW_RX_POINTER       0xF8FA
  56
  57 /* high parts of samples for fan input (8 samples)*/
  58 #define ENE_FW_SMPL_BUF_FAN     0xF8FB
  59 #define ENE_FW_SMPL_BUF_FAN_PLS 0x8000  /* combined sample is pulse */
  60 #define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF  /* combined sample maximum value */
  61 #define ENE_FW_SAMPLE_PERIOD_FAN 61     /* fan input has fixed sample period */
  62
  63 /* transmitter ports */
  64 #define ENE_GPIOFS1             0xFC01
  65 #define ENE_GPIOFS1_GPIO0D      0x20    /* enable tx output on GPIO0D */
  66 #define ENE_GPIOFS8             0xFC08
  67 #define ENE_GPIOFS8_GPIO41      0x02    /* enable tx output on GPIO40 */
  68
  69 /* IRQ registers block (for revision B) */
  70 #define ENEB_IRQ                0xFD09  /* IRQ number */
  71 #define ENEB_IRQ_UNK1           0xFD17  /* unknown setting = 1 */
  72 #define ENEB_IRQ_STATUS         0xFD80  /* irq status */
  73 #define ENEB_IRQ_STATUS_IR      0x20    /* IR irq */
  74
  75 /* fan as input settings */
  76 #define ENE_FAN_AS_IN1          0xFE30  /* fan init reg 1 */
  77 #define ENE_FAN_AS_IN1_EN       0xCD
  78 #define ENE_FAN_AS_IN2          0xFE31  /* fan init reg 2 */
  79 #define ENE_FAN_AS_IN2_EN       0x03
  80
  81 /* IRQ registers block (for revision C,D) */
  82 #define ENE_IRQ                 0xFE9B  /* new irq settings register */
  83 #define ENE_IRQ_MASK            0x0F    /* irq number mask */
  84 #define ENE_IRQ_UNK_EN          0x10    /* always enabled */
  85 #define ENE_IRQ_STATUS          0x20    /* irq status and ACK */
  86
  87 /* CIR Config register #1 */
  88 #define ENE_CIRCFG              0xFEC0
  89 #define ENE_CIRCFG_RX_EN        0x01    /* RX enable */
  90 #define ENE_CIRCFG_RX_IRQ       0x02    /* Enable hardware interrupt */
  91 #define ENE_CIRCFG_REV_POL      0x04    /* Input polarity reversed */
  92 #define ENE_CIRCFG_CARR_DEMOD   0x08    /* Enable carrier demodulator */
  93
  94 #define ENE_CIRCFG_TX_EN        0x10    /* TX enable */
  95 #define ENE_CIRCFG_TX_IRQ       0x20    /* Send interrupt on TX done */
  96 #define ENE_CIRCFG_TX_POL_REV   0x40    /* TX polarity reversed */
  97 #define ENE_CIRCFG_TX_CARR      0x80    /* send TX carrier or not */
  98
  99 /* CIR config register #2 */
 100 #define ENE_CIRCFG2             0xFEC1
 101 #define ENE_CIRCFG2_RLC         0x00
 102 #define ENE_CIRCFG2_RC5         0x01
 103 #define ENE_CIRCFG2_RC6         0x02
 104 #define ENE_CIRCFG2_NEC         0x03
 105 #define ENE_CIRCFG2_CARR_DETECT 0x10    /* Enable carrier detection */
 106 #define ENE_CIRCFG2_GPIO0A      0x20    /* Use GPIO0A instead of GPIO40 for input */
 107 #define ENE_CIRCFG2_FAST_SAMPL1 0x40    /* Fast leading pulse detection for RC6 */
 108 #define ENE_CIRCFG2_FAST_SAMPL2 0x80    /* Fast data detection for RC6 */
 109
 110 /* Knobs for protocol decoding - will document when/if will use them */
 111 #define ENE_CIRPF               0xFEC2
 112 #define ENE_CIRHIGH             0xFEC3
 113 #define ENE_CIRBIT              0xFEC4
 114 #define ENE_CIRSTART            0xFEC5
 115 #define ENE_CIRSTART2           0xFEC6
 116
 117 /* Actual register which contains RLC RX data - read by firmware */
 118 #define ENE_CIRDAT_IN           0xFEC7
 119
 120
 121 /* RLC configuration - sample period (1us resulution) + idle mode */
 122 #define ENE_CIRRLC_CFG          0xFEC8
 123 #define ENE_CIRRLC_CFG_OVERFLOW 0x80    /* interrupt on overflows if set */
 124 #define ENE_DEFAULT_SAMPLE_PERIOD 50
 125
 126 /* Two byte RLC TX buffer */
 127 #define ENE_CIRRLC_OUT0         0xFEC9
 128 #define ENE_CIRRLC_OUT1         0xFECA
 129 #define ENE_CIRRLC_OUT_PULSE    0x80    /* Transmitted sample is pulse */
 130 #define ENE_CIRRLC_OUT_MASK     0x7F
 131
 132
 133 /* Carrier detect setting
 134  * Low nibble  - number of carrier pulses to average
 135  * High nibble - number of initial carrier pulses to discard
 136  */
 137 #define ENE_CIRCAR_PULS         0xFECB
 138
 139 /* detected RX carrier period (resolution: 500 ns) */
 140 #define ENE_CIRCAR_PRD          0xFECC
 141 #define ENE_CIRCAR_PRD_VALID    0x80    /* data valid content valid */
 142
 143 /* detected RX carrier pulse width (resolution: 500 ns) */
 144 #define ENE_CIRCAR_HPRD         0xFECD
 145
 146 /* TX period (resolution: 500 ns, minimum 2)*/
 147 #define ENE_CIRMOD_PRD          0xFECE
 148 #define ENE_CIRMOD_PRD_POL      0x80    /* TX carrier polarity*/
 149
 150 #define ENE_CIRMOD_PRD_MAX      0x7F    /* 15.87 kHz */
 151 #define ENE_CIRMOD_PRD_MIN      0x02    /* 1 Mhz */
 152
 153 /* TX pulse width (resolution: 500 ns)*/
 154 #define ENE_CIRMOD_HPRD         0xFECF
 155
 156 /* Hardware versions */
 157 #define ENE_ECHV                0xFF00  /* hardware revision */
 158 #define ENE_PLLFRH              0xFF16
 159 #define ENE_PLLFRL              0xFF17
 160 #define ENE_DEFAULT_PLL_FREQ    1000
 161
 162 #define ENE_ECSTS               0xFF1D
 163 #define ENE_ECSTS_RSRVD         0x04
 164
 165 #define ENE_ECVER_MAJOR         0xFF1E  /* chip version */
 166 #define ENE_ECVER_MINOR         0xFF1F
 167 #define ENE_HW_VER_OLD          0xFD00
 168
 169 /******************************************************************************/
 170
 171 #define ENE_DRIVER_NAME         "ene_ir"
 172
 173 #define ENE_IRQ_RX              1
 174 #define ENE_IRQ_TX              2
 175
 176 #define  ENE_HW_B               1       /* 3926B */
 177 #define  ENE_HW_C               2       /* 3926C */
 178 #define  ENE_HW_D               3       /* 3926D or later */
 179
 180 #define __dbg(level, format, ...)                               \
 181 do {                                                            \
 182         if (debug >= level)                                     \
 183                 pr_info(format "\n", ## __VA_ARGS__);           \
 184 } while (0)
 185
 186 #define dbg(format, ...)                __dbg(1, format, ## __VA_ARGS__)
 187 #define dbg_verbose(format, ...)        __dbg(2, format, ## __VA_ARGS__)
 188 #define dbg_regs(format, ...)           __dbg(3, format, ## __VA_ARGS__)
 189
 190 struct ene_device {
 191         struct pnp_dev *pnp_dev;
 192         struct rc_dev *rdev;
 193
 194         /* hw IO settings */
 195         long hw_io;
 196         int irq;
 197         spinlock_t hw_lock;
 198
 199         /* HW features */
 200         int hw_revision;                        /* hardware revision */
 201         bool hw_use_gpio_0a;                    /* gpio0a is demodulated input*/
 202         bool hw_extra_buffer;                   /* hardware has 'extra buffer' */
 203         bool hw_fan_input;                      /* fan input is IR data source */
 204         bool hw_learning_and_tx_capable;        /* learning & tx capable */
 205         int  pll_freq;
 206         int buffer_len;
 207
 208         /* Extra RX buffer location */
 209         int extra_buf1_address;
 210         int extra_buf1_len;
 211         int extra_buf2_address;
 212         int extra_buf2_len;
 213
 214         /* HW state*/
 215         int r_pointer;                          /* pointer to next sample to read */
 216         int w_pointer;                          /* pointer to next sample hw will write */
 217         bool rx_fan_input_inuse;                /* is fan input in use for rx*/
 218         int tx_reg;                             /* current reg used for TX */
 219         u8  saved_conf1;                        /* saved FEC0 reg */
 220         unsigned int tx_sample;                 /* current sample for TX */
 221         bool tx_sample_pulse;                   /* current sample is pulse */
 222
 223         /* TX buffer */
 224         unsigned *tx_buffer;                    /* input samples buffer*/
 225         int tx_pos;                             /* position in that buffer */
 226         int tx_len;                             /* current len of tx buffer */
 227         int tx_done;                            /* done transmitting */
 228                                                 /* one more sample pending*/
 229         struct completion tx_complete;          /* TX completion */
 230         struct timer_list tx_sim_timer;
 231
 232         /* TX settings */
 233         int tx_period;
 234         int tx_duty_cycle;
 235         int transmitter_mask;
 236
 237         /* RX settings */
 238         bool learning_mode_enabled;             /* learning input enabled */
 239         bool carrier_detect_enabled;            /* carrier detect enabled */
 240         int rx_period_adjust;
 241         bool rx_enabled;
 242 };
 243
 244 static int ene_irq_status(struct ene_device *dev);
 245 static void ene_rx_read_hw_pointer(struct ene_device *dev);