drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c

   1 /*
   2  * This module provides common API to set Diagnostic trigger for MPT
   3  * (Message Passing Technology) based controllers
   4  *
   5  * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
   6  * Copyright (C) 2012-2014  LSI Corporation
   7  * Copyright (C) 2013-2014 Avago Technologies
   8  *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License
  12  * as published by the Free Software Foundation; either version 2
  13  * of the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * NO WARRANTY
  21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25  * solely responsible for determining the appropriateness of using and
  26  * distributing the Program and assumes all risks associated with its
  27  * exercise of rights under this Agreement, including but not limited to
  28  * the risks and costs of program errors, damage to or loss of data,
  29  * programs or equipment, and unavailability or interruption of operations.
  30
  31  * DISCLAIMER OF LIABILITY
  32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39
  40  * You should have received a copy of the GNU General Public License
  41  * along with this program; if not, write to the Free Software
  42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  43  * USA.
  44  */
  45
  46 #include <linux/kernel.h>
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/init.h>
  50 #include <linux/slab.h>
  51 #include <linux/types.h>
  52 #include <linux/pci.h>
  53 #include <linux/delay.h>
  54 #include <linux/compat.h>
  55 #include <linux/poll.h>
  56
  57 #include <linux/io.h>
  58 #include <linux/uaccess.h>
  59
  60 #include "mpt3sas_base.h"
  61
  62 /**
  63  * _mpt3sas_raise_sigio - notifiy app
  64  * @ioc: per adapter object
  65  * @event_data: ?
  66  */
  67 static void
  68 _mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc,
  69         struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
  70 {
  71         Mpi2EventNotificationReply_t *mpi_reply;
  72         u16 sz, event_data_sz;
  73         unsigned long flags;
  74
  75         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
  76
  77         sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
  78             sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4;
  79         mpi_reply = kzalloc(sz, GFP_KERNEL);
  80         if (!mpi_reply)
  81                 goto out;
  82         mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED);
  83         event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4;
  84         mpi_reply->EventDataLength = cpu_to_le16(event_data_sz);
  85         memcpy(&mpi_reply->EventData, event_data,
  86             sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
  87         dTriggerDiagPrintk(ioc,
  88                            ioc_info(ioc, "%s: add to driver event log\n",
  89                                     __func__));
  90         mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
  91         kfree(mpi_reply);
  92  out:
  93
  94         /* clearing the diag_trigger_active flag */
  95         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
  96         dTriggerDiagPrintk(ioc,
  97                            ioc_info(ioc, "%s: clearing diag_trigger_active flag\n",
  98                                     __func__));
  99         ioc->diag_trigger_active = 0;
 100         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 101
 102         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
 103                                          __func__));
 104 }
 105
 106 /**
 107  * mpt3sas_process_trigger_data - process the event data for the trigger
 108  * @ioc: per adapter object
 109  * @event_data: ?
 110  */
 111 void
 112 mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
 113         struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
 114 {
 115         u8 issue_reset = 0;
 116
 117         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
 118
 119         /* release the diag buffer trace */
 120         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 121             MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
 122                 dTriggerDiagPrintk(ioc,
 123                                    ioc_info(ioc, "%s: release trace diag buffer\n",
 124                                             __func__));
 125                 mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
 126                     &issue_reset);
 127         }
 128
 129         _mpt3sas_raise_sigio(ioc, event_data);
 130
 131         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
 132                                          __func__));
 133 }
 134
 135 /**
 136  * mpt3sas_trigger_master - Master trigger handler
 137  * @ioc: per adapter object
 138  * @trigger_bitmask:
 139  *
 140  */
 141 void
 142 mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask)
 143 {
 144         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 145         unsigned long flags;
 146         u8 found_match = 0;
 147
 148         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 149
 150         if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
 151             trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
 152                 goto by_pass_checks;
 153
 154         /* check to see if trace buffers are currently registered */
 155         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 156             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 157                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 158                 return;
 159         }
 160
 161         /* check to see if trace buffers are currently released */
 162         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 163             MPT3_DIAG_BUFFER_IS_RELEASED) {
 164                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 165                 return;
 166         }
 167
 168  by_pass_checks:
 169
 170         dTriggerDiagPrintk(ioc,
 171                            ioc_info(ioc, "%s: enter - trigger_bitmask = 0x%08x\n",
 172                                     __func__, trigger_bitmask));
 173
 174         /* don't send trigger if an trigger is currently active */
 175         if (ioc->diag_trigger_active) {
 176                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 177                 goto out;
 178         }
 179
 180         /* check for the trigger condition */
 181         if (ioc->diag_trigger_master.MasterData & trigger_bitmask) {
 182                 found_match = 1;
 183                 ioc->diag_trigger_active = 1;
 184                 dTriggerDiagPrintk(ioc,
 185                                    ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
 186                                             __func__));
 187         }
 188         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 189
 190         if (!found_match)
 191                 goto out;
 192
 193         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 194         event_data.trigger_type = MPT3SAS_TRIGGER_MASTER;
 195         event_data.u.master.MasterData = trigger_bitmask;
 196
 197         if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
 198             trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
 199                 _mpt3sas_raise_sigio(ioc, &event_data);
 200         else
 201                 mpt3sas_send_trigger_data_event(ioc, &event_data);
 202
 203  out:
 204         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
 205                                          __func__));
 206 }
 207
 208 /**
 209  * mpt3sas_trigger_event - Event trigger handler
 210  * @ioc: per adapter object
 211  * @event: ?
 212  * @log_entry_qualifier: ?
 213  *
 214  */
 215 void
 216 mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
 217         u16 log_entry_qualifier)
 218 {
 219         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 220         struct SL_WH_EVENT_TRIGGER_T *event_trigger;
 221         int i;
 222         unsigned long flags;
 223         u8 found_match;
 224
 225         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 226
 227         /* check to see if trace buffers are currently registered */
 228         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 229             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 230                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 231                 return;
 232         }
 233
 234         /* check to see if trace buffers are currently released */
 235         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 236             MPT3_DIAG_BUFFER_IS_RELEASED) {
 237                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 238                 return;
 239         }
 240
 241         dTriggerDiagPrintk(ioc,
 242                            ioc_info(ioc, "%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n",
 243                                     __func__, event, log_entry_qualifier));
 244
 245         /* don't send trigger if an trigger is currently active */
 246         if (ioc->diag_trigger_active) {
 247                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 248                 goto out;
 249         }
 250
 251         /* check for the trigger condition */
 252         event_trigger = ioc->diag_trigger_event.EventTriggerEntry;
 253         for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries
 254             && !found_match; i++, event_trigger++) {
 255                 if (event_trigger->EventValue != event)
 256                         continue;
 257                 if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
 258                         if (event_trigger->LogEntryQualifier ==
 259                             log_entry_qualifier)
 260                                 found_match = 1;
 261                         continue;
 262                 }
 263                 found_match = 1;
 264                 ioc->diag_trigger_active = 1;
 265                 dTriggerDiagPrintk(ioc,
 266                                    ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
 267                                             __func__));
 268         }
 269         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 270
 271         if (!found_match)
 272                 goto out;
 273
 274         dTriggerDiagPrintk(ioc,
 275                            ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
 276                                     __func__));
 277         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 278         event_data.trigger_type = MPT3SAS_TRIGGER_EVENT;
 279         event_data.u.event.EventValue = event;
 280         event_data.u.event.LogEntryQualifier = log_entry_qualifier;
 281         mpt3sas_send_trigger_data_event(ioc, &event_data);
 282  out:
 283         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
 284                                          __func__));
 285 }
 286
 287 /**
 288  * mpt3sas_trigger_scsi - SCSI trigger handler
 289  * @ioc: per adapter object
 290  * @sense_key: ?
 291  * @asc: ?
 292  * @ascq: ?
 293  *
 294  */
 295 void
 296 mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc,
 297         u8 ascq)
 298 {
 299         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 300         struct SL_WH_SCSI_TRIGGER_T *scsi_trigger;
 301         int i;
 302         unsigned long flags;
 303         u8 found_match;
 304
 305         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 306
 307         /* check to see if trace buffers are currently registered */
 308         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 309             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 310                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 311                 return;
 312         }
 313
 314         /* check to see if trace buffers are currently released */
 315         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 316             MPT3_DIAG_BUFFER_IS_RELEASED) {
 317                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 318                 return;
 319         }
 320
 321         dTriggerDiagPrintk(ioc,
 322                            ioc_info(ioc, "%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n",
 323                                     __func__, sense_key, asc, ascq));
 324
 325         /* don't send trigger if an trigger is currently active */
 326         if (ioc->diag_trigger_active) {
 327                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 328                 goto out;
 329         }
 330
 331         /* check for the trigger condition */
 332         scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry;
 333         for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries
 334             && !found_match; i++, scsi_trigger++) {
 335                 if (scsi_trigger->SenseKey != sense_key)
 336                         continue;
 337                 if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc))
 338                         continue;
 339                 if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq))
 340                         continue;
 341                 found_match = 1;
 342                 ioc->diag_trigger_active = 1;
 343         }
 344         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 345
 346         if (!found_match)
 347                 goto out;
 348
 349         dTriggerDiagPrintk(ioc,
 350                            ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
 351                                     __func__));
 352         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 353         event_data.trigger_type = MPT3SAS_TRIGGER_SCSI;
 354         event_data.u.scsi.SenseKey = sense_key;
 355         event_data.u.scsi.ASC = asc;
 356         event_data.u.scsi.ASCQ = ascq;
 357         mpt3sas_send_trigger_data_event(ioc, &event_data);
 358  out:
 359         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
 360                                          __func__));
 361 }
 362
 363 /**
 364  * mpt3sas_trigger_mpi - MPI trigger handler
 365  * @ioc: per adapter object
 366  * @ioc_status: ?
 367  * @loginfo: ?
 368  *
 369  */
 370 void
 371 mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo)
 372 {
 373         struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
 374         struct SL_WH_MPI_TRIGGER_T *mpi_trigger;
 375         int i;
 376         unsigned long flags;
 377         u8 found_match;
 378
 379         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
 380
 381         /* check to see if trace buffers are currently registered */
 382         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 383             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 384                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 385                 return;
 386         }
 387
 388         /* check to see if trace buffers are currently released */
 389         if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
 390             MPT3_DIAG_BUFFER_IS_RELEASED) {
 391                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 392                 return;
 393         }
 394
 395         dTriggerDiagPrintk(ioc,
 396                            ioc_info(ioc, "%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n",
 397                                     __func__, ioc_status, loginfo));
 398
 399         /* don't send trigger if an trigger is currently active */
 400         if (ioc->diag_trigger_active) {
 401                 spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 402                 goto out;
 403         }
 404
 405         /* check for the trigger condition */
 406         mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry;
 407         for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries
 408             && !found_match; i++, mpi_trigger++) {
 409                 if (mpi_trigger->IOCStatus != ioc_status)
 410                         continue;
 411                 if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF ||
 412                     mpi_trigger->IocLogInfo == loginfo))
 413                         continue;
 414                 found_match = 1;
 415                 ioc->diag_trigger_active = 1;
 416         }
 417         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
 418
 419         if (!found_match)
 420                 goto out;
 421
 422         dTriggerDiagPrintk(ioc,
 423                            ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
 424                                     __func__));
 425         memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
 426         event_data.trigger_type = MPT3SAS_TRIGGER_MPI;
 427         event_data.u.mpi.IOCStatus = ioc_status;
 428         event_data.u.mpi.IocLogInfo = loginfo;
 429         mpt3sas_send_trigger_data_event(ioc, &event_data);
 430  out:
 431         dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
 432                                          __func__));
 433 }