arch/arm/mach-imx/iomux-v3.h

   1 /*
   2  * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
   3  *                      <armlinux@phytec.de>
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License
   7  * as published by the Free Software Foundation; either version 2
   8  * of the License, or (at your option) any later version.
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  17  * MA 02110-1301, USA.
  18  */
  19
  20 #ifndef __MACH_IOMUX_V3_H__
  21 #define __MACH_IOMUX_V3_H__
  22
  23 /*
  24  *      build IOMUX_PAD structure
  25  *
  26  * This iomux scheme is based around pads, which are the physical balls
  27  * on the processor.
  28  *
  29  * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
  30  *   things like driving strength and pullup/pulldown.
  31  * - Each pad can have but not necessarily does have an output routing register
  32  *   (IOMUXC_SW_MUX_CTL_PAD_x).
  33  * - Each pad can have but not necessarily does have an input routing register
  34  *   (IOMUXC_x_SELECT_INPUT)
  35  *
  36  * The three register sets do not have a fixed offset to each other,
  37  * hence we order this table by pad control registers (which all pads
  38  * have) and put the optional i/o routing registers into additional
  39  * fields.
  40  *
  41  * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
  42  * If <padname> or <padmode> refers to a GPIO, it is named
  43  * GPIO_<unit>_<num>
  44  *
  45  * IOMUX/PAD Bit field definitions
  46  *
  47  * MUX_CTRL_OFS:            0..11 (12)
  48  * PAD_CTRL_OFS:           12..23 (12)
  49  * SEL_INPUT_OFS:          24..35 (12)
  50  * MUX_MODE + SION:        36..40  (5)
  51  * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
  52  * SEL_INP:                58..61  (4)
  53  * reserved:                 63    (1)
  54 */
  55
  56 typedef u64 iomux_v3_cfg_t;
  57
  58 #define MUX_CTRL_OFS_SHIFT      0
  59 #define MUX_CTRL_OFS_MASK       ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
  60 #define MUX_PAD_CTRL_OFS_SHIFT  12
  61 #define MUX_PAD_CTRL_OFS_MASK   ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
  62 #define MUX_SEL_INPUT_OFS_SHIFT 24
  63 #define MUX_SEL_INPUT_OFS_MASK  ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
  64
  65 #define MUX_MODE_SHIFT          36
  66 #define MUX_MODE_MASK           ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
  67 #define MUX_PAD_CTRL_SHIFT      41
  68 #define MUX_PAD_CTRL_MASK       ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
  69 #define MUX_SEL_INPUT_SHIFT     58
  70 #define MUX_SEL_INPUT_MASK      ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
  71
  72 #define MUX_PAD_CTRL(x)         ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
  73
  74 #define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
  75                 _sel_input, _pad_ctrl)                                  \
  76         (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) |      \
  77                 ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) |       \
  78                 ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
  79                 ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) |   \
  80                 ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
  81                 ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
  82
  83 #define NEW_PAD_CTRL(cfg, pad)  (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
  84 /*
  85  * Use to set PAD control
  86  */
  87
  88 #define NO_PAD_CTRL                     (1 << 16)
  89 #define PAD_CTL_DVS                     (1 << 13)
  90 #define PAD_CTL_HYS                     (1 << 8)
  91
  92 #define PAD_CTL_PKE                     (1 << 7)
  93 #define PAD_CTL_PUE                     (1 << 6 | PAD_CTL_PKE)
  94 #define PAD_CTL_PUS_100K_DOWN           (0 << 4 | PAD_CTL_PUE)
  95 #define PAD_CTL_PUS_47K_UP              (1 << 4 | PAD_CTL_PUE)
  96 #define PAD_CTL_PUS_100K_UP             (2 << 4 | PAD_CTL_PUE)
  97 #define PAD_CTL_PUS_22K_UP              (3 << 4 | PAD_CTL_PUE)
  98
  99 #define PAD_CTL_ODE                     (1 << 3)
 100
 101 #define PAD_CTL_DSE_LOW                 (0 << 1)
 102 #define PAD_CTL_DSE_MED                 (1 << 1)
 103 #define PAD_CTL_DSE_HIGH                (2 << 1)
 104 #define PAD_CTL_DSE_MAX                 (3 << 1)
 105
 106 #define PAD_CTL_SRE_FAST                (1 << 0)
 107 #define PAD_CTL_SRE_SLOW                (0 << 0)
 108
 109 #define IOMUX_CONFIG_SION               (0x1 << 4)
 110
 111 #define MX51_NUM_GPIO_PORT      4
 112
 113 #define GPIO_PIN_MASK 0x1f
 114
 115 #define GPIO_PORT_SHIFT 5
 116 #define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
 117
 118 #define GPIO_PORTA      (0 << GPIO_PORT_SHIFT)
 119 #define GPIO_PORTB      (1 << GPIO_PORT_SHIFT)
 120 #define GPIO_PORTC      (2 << GPIO_PORT_SHIFT)
 121 #define GPIO_PORTD      (3 << GPIO_PORT_SHIFT)
 122 #define GPIO_PORTE      (4 << GPIO_PORT_SHIFT)
 123 #define GPIO_PORTF      (5 << GPIO_PORT_SHIFT)
 124
 125 /*
 126  * setups a single pad in the iomuxer
 127  */
 128 int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 129
 130 /*
 131  * setups mutliple pads
 132  * convenient way to call the above function with tables
 133  */
 134 int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
 135
 136 /*
 137  * Initialise the iomux controller
 138  */
 139 void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
 140
 141 #endif /* __MACH_IOMUX_V3_H__*/
 142