x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mach-imx / mach-mxt_td60.c
blobf4a8c7e108e19d05410388b7000c72b57a1ad97a
1 /*
2 * Copyright (C) 2000 Deep Blue Solutions Ltd
3 * Copyright (C) 2002 Shane Nay (shane@minirl.com)
4 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
17 #include <linux/platform_device.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/map.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/mtd/physmap.h>
22 #include <linux/i2c.h>
23 #include <linux/irq.h>
24 #include <asm/mach-types.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/time.h>
27 #include <asm/mach/map.h>
28 #include <linux/gpio.h>
29 #include <linux/i2c/pca953x.h>
31 #include "common.h"
32 #include "devices-imx27.h"
33 #include "hardware.h"
34 #include "iomux-mx27.h"
36 static const int mxt_td60_pins[] __initconst = {
37 /* UART0 */
38 PE12_PF_UART1_TXD,
39 PE13_PF_UART1_RXD,
40 PE14_PF_UART1_CTS,
41 PE15_PF_UART1_RTS,
42 /* UART1 */
43 PE3_PF_UART2_CTS,
44 PE4_PF_UART2_RTS,
45 PE6_PF_UART2_TXD,
46 PE7_PF_UART2_RXD,
47 /* UART2 */
48 PE8_PF_UART3_TXD,
49 PE9_PF_UART3_RXD,
50 PE10_PF_UART3_CTS,
51 PE11_PF_UART3_RTS,
52 /* FEC */
53 PD0_AIN_FEC_TXD0,
54 PD1_AIN_FEC_TXD1,
55 PD2_AIN_FEC_TXD2,
56 PD3_AIN_FEC_TXD3,
57 PD4_AOUT_FEC_RX_ER,
58 PD5_AOUT_FEC_RXD1,
59 PD6_AOUT_FEC_RXD2,
60 PD7_AOUT_FEC_RXD3,
61 PD8_AF_FEC_MDIO,
62 PD9_AIN_FEC_MDC,
63 PD10_AOUT_FEC_CRS,
64 PD11_AOUT_FEC_TX_CLK,
65 PD12_AOUT_FEC_RXD0,
66 PD13_AOUT_FEC_RX_DV,
67 PD14_AOUT_FEC_RX_CLK,
68 PD15_AOUT_FEC_COL,
69 PD16_AIN_FEC_TX_ER,
70 PF23_AIN_FEC_TX_EN,
71 /* I2C1 */
72 PD17_PF_I2C_DATA,
73 PD18_PF_I2C_CLK,
74 /* I2C2 */
75 PC5_PF_I2C2_SDA,
76 PC6_PF_I2C2_SCL,
77 /* FB */
78 PA5_PF_LSCLK,
79 PA6_PF_LD0,
80 PA7_PF_LD1,
81 PA8_PF_LD2,
82 PA9_PF_LD3,
83 PA10_PF_LD4,
84 PA11_PF_LD5,
85 PA12_PF_LD6,
86 PA13_PF_LD7,
87 PA14_PF_LD8,
88 PA15_PF_LD9,
89 PA16_PF_LD10,
90 PA17_PF_LD11,
91 PA18_PF_LD12,
92 PA19_PF_LD13,
93 PA20_PF_LD14,
94 PA21_PF_LD15,
95 PA22_PF_LD16,
96 PA23_PF_LD17,
97 PA25_PF_CLS,
98 PA27_PF_SPL_SPR,
99 PA28_PF_HSYNC,
100 PA29_PF_VSYNC,
101 PA30_PF_CONTRAST,
102 PA31_PF_OE_ACD,
103 /* OWIRE */
104 PE16_AF_OWIRE,
105 /* SDHC1*/
106 PE18_PF_SD1_D0,
107 PE19_PF_SD1_D1,
108 PE20_PF_SD1_D2,
109 PE21_PF_SD1_D3,
110 PE22_PF_SD1_CMD,
111 PE23_PF_SD1_CLK,
112 PF8_AF_ATA_IORDY,
113 /* SDHC2*/
114 PB4_PF_SD2_D0,
115 PB5_PF_SD2_D1,
116 PB6_PF_SD2_D2,
117 PB7_PF_SD2_D3,
118 PB8_PF_SD2_CMD,
119 PB9_PF_SD2_CLK,
122 static const struct mxc_nand_platform_data
123 mxt_td60_nand_board_info __initconst = {
124 .width = 1,
125 .hw_ecc = 1,
128 static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
129 .bitrate = 100000,
132 /* PCA9557 */
133 static int mxt_td60_pca9557_setup(struct i2c_client *client,
134 unsigned gpio_base, unsigned ngpio,
135 void *context)
137 static int mxt_td60_gpio_value[] = {
138 -1, -1, -1, -1, -1, -1, -1, 1
140 int n;
142 for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
143 gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
144 if (mxt_td60_gpio_value[n] < 0)
145 gpio_direction_input(gpio_base + n);
146 else
147 gpio_direction_output(gpio_base + n,
148 mxt_td60_gpio_value[n]);
149 gpio_export(gpio_base + n, 0);
152 return 0;
155 static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
156 .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */
157 .invert = 0, /* Do not invert */
158 .setup = mxt_td60_pca9557_setup,
161 static struct i2c_board_info mxt_td60_i2c_devices[] = {
163 I2C_BOARD_INFO("pca9557", 0x18),
164 .platform_data = &mxt_td60_pca9557_pdata,
168 static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
169 .bitrate = 100000,
172 static struct i2c_board_info mxt_td60_i2c2_devices[] = {
175 static struct imx_fb_videomode mxt_td60_modes[] = {
177 .mode = {
178 .name = "Chimei LW700AT9003",
179 .refresh = 60,
180 .xres = 800,
181 .yres = 480,
182 .pixclock = 30303,
183 .hsync_len = 64,
184 .left_margin = 0x67,
185 .right_margin = 0x68,
186 .vsync_len = 16,
187 .upper_margin = 0x0f,
188 .lower_margin = 0x0f,
190 .bpp = 16,
191 .pcr = 0xFA208B83,
195 static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
196 .mode = mxt_td60_modes,
197 .num_modes = ARRAY_SIZE(mxt_td60_modes),
200 * - HSYNC active high
201 * - VSYNC active high
202 * - clk notenabled while idle
203 * - clock inverted
204 * - data not inverted
205 * - data enable low active
206 * - enable sharp mode
208 .pwmr = 0x00A903FF,
209 .lscr1 = 0x00120300,
210 .dmacr = 0x00020010,
213 static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
214 void *data)
216 return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
217 IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
220 static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
222 free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
225 static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
226 .init = mxt_td60_sdhc1_init,
227 .exit = mxt_td60_sdhc1_exit,
230 static const struct imxuart_platform_data uart_pdata __initconst = {
231 .flags = IMXUART_HAVE_RTSCTS,
234 static void __init mxt_td60_board_init(void)
236 imx27_soc_init();
238 mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
239 "MXT_TD60");
241 imx27_add_imx_uart0(&uart_pdata);
242 imx27_add_imx_uart1(&uart_pdata);
243 imx27_add_imx_uart2(&uart_pdata);
244 imx27_add_mxc_nand(&mxt_td60_nand_board_info);
246 i2c_register_board_info(0, mxt_td60_i2c_devices,
247 ARRAY_SIZE(mxt_td60_i2c_devices));
249 i2c_register_board_info(1, mxt_td60_i2c2_devices,
250 ARRAY_SIZE(mxt_td60_i2c2_devices));
252 imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
253 imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
254 imx27_add_imx_fb(&mxt_td60_fb_data);
255 imx27_add_mxc_mmc(0, &sdhc1_pdata);
256 imx27_add_fec(NULL);
259 static void __init mxt_td60_timer_init(void)
261 mx27_clocks_init(26000000);
264 static struct sys_timer mxt_td60_timer = {
265 .init = mxt_td60_timer_init,
268 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
269 /* maintainer: Maxtrack Industrial */
270 .atag_offset = 0x100,
271 .map_io = mx27_map_io,
272 .init_early = imx27_init_early,
273 .init_irq = mx27_init_irq,
274 .handle_irq = imx27_handle_irq,
275 .timer = &mxt_td60_timer,
276 .init_machine = mxt_td60_board_init,
277 .restart = mxc_restart,
278 MACHINE_END