x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mach-kirkwood / db88f6281-bp-setup.c
blobc49b177c15236a1e8c3bc0bf2fa7d719b5132145
1 /*
2 * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
4 * Marvell DB-88F6281-BP Development Board Setup
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/sizes.h>
14 #include <linux/platform_device.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/ata_platform.h>
17 #include <linux/mv643xx_eth.h>
18 #include <asm/mach-types.h>
19 #include <asm/mach/arch.h>
20 #include <mach/kirkwood.h>
21 #include <linux/platform_data/mmc-mvsdio.h>
22 #include "common.h"
23 #include "mpp.h"
25 static struct mtd_partition db88f6281_nand_parts[] = {
27 .name = "u-boot",
28 .offset = 0,
29 .size = SZ_1M
30 }, {
31 .name = "uImage",
32 .offset = MTDPART_OFS_NXTBLK,
33 .size = SZ_4M
34 }, {
35 .name = "root",
36 .offset = MTDPART_OFS_NXTBLK,
37 .size = MTDPART_SIZ_FULL
41 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
42 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
45 static struct mv_sata_platform_data db88f6281_sata_data = {
46 .n_ports = 2,
49 static struct mvsdio_platform_data db88f6281_mvsdio_data = {
50 .gpio_write_protect = 37,
51 .gpio_card_detect = 38,
54 static unsigned int db88f6281_mpp_config[] __initdata = {
55 MPP0_NF_IO2,
56 MPP1_NF_IO3,
57 MPP2_NF_IO4,
58 MPP3_NF_IO5,
59 MPP4_NF_IO6,
60 MPP5_NF_IO7,
61 MPP18_NF_IO0,
62 MPP19_NF_IO1,
63 MPP37_GPIO,
64 MPP38_GPIO,
68 static void __init db88f6281_init(void)
71 * Basic setup. Needs to be called early.
73 kirkwood_init();
74 kirkwood_mpp_conf(db88f6281_mpp_config);
76 kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
77 kirkwood_ehci_init();
78 kirkwood_ge00_init(&db88f6281_ge00_data);
79 kirkwood_sata_init(&db88f6281_sata_data);
80 kirkwood_uart0_init();
81 kirkwood_sdio_init(&db88f6281_mvsdio_data);
84 static int __init db88f6281_pci_init(void)
86 if (machine_is_db88f6281_bp()) {
87 u32 dev, rev;
89 kirkwood_pcie_id(&dev, &rev);
90 if (dev == MV88F6282_DEV_ID)
91 kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
92 else
93 kirkwood_pcie_init(KW_PCIE0);
95 return 0;
97 subsys_initcall(db88f6281_pci_init);
99 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
100 /* Maintainer: Saeed Bishara <saeed@marvell.com> */
101 .atag_offset = 0x100,
102 .init_machine = db88f6281_init,
103 .map_io = kirkwood_map_io,
104 .init_early = kirkwood_init_early,
105 .init_irq = kirkwood_init_irq,
106 .timer = &kirkwood_timer,
107 .restart = kirkwood_restart,
108 MACHINE_END