x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mach-mmp / aspenite.c
blobe5dba9c5dc548c2f35f63eada103be437c69a5b4
1 /*
2 * linux/arch/arm/mach-mmp/aspenite.c
4 * Support for the Marvell PXA168-based Aspenite and Zylonite2
5 * Development Platform.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * publishhed by the Free Software Foundation.
11 #include <linux/gpio.h>
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/platform_device.h>
15 #include <linux/smc91x.h>
16 #include <linux/mtd/mtd.h>
17 #include <linux/mtd/partitions.h>
18 #include <linux/mtd/nand.h>
19 #include <linux/interrupt.h>
20 #include <linux/platform_data/mv_usb.h>
22 #include <asm/mach-types.h>
23 #include <asm/mach/arch.h>
24 #include <mach/addr-map.h>
25 #include <mach/mfp-pxa168.h>
26 #include <mach/pxa168.h>
27 #include <mach/irqs.h>
28 #include <video/pxa168fb.h>
29 #include <linux/input.h>
30 #include <linux/platform_data/keypad-pxa27x.h>
32 #include "common.h"
34 static unsigned long common_pin_config[] __initdata = {
35 /* Data Flash Interface */
36 GPIO0_DFI_D15,
37 GPIO1_DFI_D14,
38 GPIO2_DFI_D13,
39 GPIO3_DFI_D12,
40 GPIO4_DFI_D11,
41 GPIO5_DFI_D10,
42 GPIO6_DFI_D9,
43 GPIO7_DFI_D8,
44 GPIO8_DFI_D7,
45 GPIO9_DFI_D6,
46 GPIO10_DFI_D5,
47 GPIO11_DFI_D4,
48 GPIO12_DFI_D3,
49 GPIO13_DFI_D2,
50 GPIO14_DFI_D1,
51 GPIO15_DFI_D0,
53 /* Static Memory Controller */
54 GPIO18_SMC_nCS0,
55 GPIO34_SMC_nCS1,
56 GPIO23_SMC_nLUA,
57 GPIO25_SMC_nLLA,
58 GPIO28_SMC_RDY,
59 GPIO29_SMC_SCLK,
60 GPIO35_SMC_BE1,
61 GPIO36_SMC_BE2,
62 GPIO27_GPIO, /* Ethernet IRQ */
64 /* UART1 */
65 GPIO107_UART1_RXD,
66 GPIO108_UART1_TXD,
68 /* SSP1 */
69 GPIO113_I2S_MCLK,
70 GPIO114_I2S_FRM,
71 GPIO115_I2S_BCLK,
72 GPIO116_I2S_RXD,
73 GPIO117_I2S_TXD,
75 /* LCD */
76 GPIO56_LCD_FCLK_RD,
77 GPIO57_LCD_LCLK_A0,
78 GPIO58_LCD_PCLK_WR,
79 GPIO59_LCD_DENA_BIAS,
80 GPIO60_LCD_DD0,
81 GPIO61_LCD_DD1,
82 GPIO62_LCD_DD2,
83 GPIO63_LCD_DD3,
84 GPIO64_LCD_DD4,
85 GPIO65_LCD_DD5,
86 GPIO66_LCD_DD6,
87 GPIO67_LCD_DD7,
88 GPIO68_LCD_DD8,
89 GPIO69_LCD_DD9,
90 GPIO70_LCD_DD10,
91 GPIO71_LCD_DD11,
92 GPIO72_LCD_DD12,
93 GPIO73_LCD_DD13,
94 GPIO74_LCD_DD14,
95 GPIO75_LCD_DD15,
96 GPIO76_LCD_DD16,
97 GPIO77_LCD_DD17,
98 GPIO78_LCD_DD18,
99 GPIO79_LCD_DD19,
100 GPIO80_LCD_DD20,
101 GPIO81_LCD_DD21,
102 GPIO82_LCD_DD22,
103 GPIO83_LCD_DD23,
105 /* Keypad */
106 GPIO109_KP_MKIN1,
107 GPIO110_KP_MKIN0,
108 GPIO111_KP_MKOUT7,
109 GPIO112_KP_MKOUT6,
110 GPIO121_KP_MKIN4,
113 static struct smc91x_platdata smc91x_info = {
114 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
117 static struct resource smc91x_resources[] = {
118 [0] = {
119 .start = SMC_CS1_PHYS_BASE + 0x300,
120 .end = SMC_CS1_PHYS_BASE + 0xfffff,
121 .flags = IORESOURCE_MEM,
123 [1] = {
124 .start = MMP_GPIO_TO_IRQ(27),
125 .end = MMP_GPIO_TO_IRQ(27),
126 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
130 static struct platform_device smc91x_device = {
131 .name = "smc91x",
132 .id = 0,
133 .dev = {
134 .platform_data = &smc91x_info,
136 .num_resources = ARRAY_SIZE(smc91x_resources),
137 .resource = smc91x_resources,
140 static struct mtd_partition aspenite_nand_partitions[] = {
142 .name = "bootloader",
143 .offset = 0,
144 .size = SZ_1M,
145 .mask_flags = MTD_WRITEABLE,
146 }, {
147 .name = "reserved",
148 .offset = MTDPART_OFS_APPEND,
149 .size = SZ_128K,
150 .mask_flags = MTD_WRITEABLE,
151 }, {
152 .name = "reserved",
153 .offset = MTDPART_OFS_APPEND,
154 .size = SZ_8M,
155 .mask_flags = MTD_WRITEABLE,
156 }, {
157 .name = "kernel",
158 .offset = MTDPART_OFS_APPEND,
159 .size = (SZ_2M + SZ_1M),
160 .mask_flags = 0,
161 }, {
162 .name = "filesystem",
163 .offset = MTDPART_OFS_APPEND,
164 .size = SZ_32M + SZ_16M,
165 .mask_flags = 0,
169 static struct pxa3xx_nand_platform_data aspenite_nand_info = {
170 .enable_arbiter = 1,
171 .num_cs = 1,
172 .parts[0] = aspenite_nand_partitions,
173 .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions),
176 static struct i2c_board_info aspenite_i2c_info[] __initdata = {
177 { I2C_BOARD_INFO("wm8753", 0x1b), },
180 static struct fb_videomode video_modes[] = {
181 [0] = {
182 .pixclock = 30120,
183 .refresh = 60,
184 .xres = 800,
185 .yres = 480,
186 .hsync_len = 1,
187 .left_margin = 215,
188 .right_margin = 40,
189 .vsync_len = 1,
190 .upper_margin = 34,
191 .lower_margin = 10,
192 .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
196 struct pxa168fb_mach_info aspenite_lcd_info = {
197 .id = "Graphic Frame",
198 .modes = video_modes,
199 .num_modes = ARRAY_SIZE(video_modes),
200 .pix_fmt = PIX_FMT_RGB565,
201 .io_pin_allocation_mode = PIN_MODE_DUMB_24,
202 .dumb_mode = DUMB_MODE_RGB888,
203 .active = 1,
204 .panel_rbswap = 0,
205 .invert_pixclock = 0,
208 static unsigned int aspenite_matrix_key_map[] = {
209 KEY(0, 6, KEY_UP), /* SW 4 */
210 KEY(0, 7, KEY_DOWN), /* SW 5 */
211 KEY(1, 6, KEY_LEFT), /* SW 6 */
212 KEY(1, 7, KEY_RIGHT), /* SW 7 */
213 KEY(4, 6, KEY_ENTER), /* SW 8 */
214 KEY(4, 7, KEY_ESC), /* SW 9 */
217 static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
218 .matrix_key_rows = 5,
219 .matrix_key_cols = 8,
220 .matrix_key_map = aspenite_matrix_key_map,
221 .matrix_key_map_size = ARRAY_SIZE(aspenite_matrix_key_map),
222 .debounce_interval = 30,
225 #if defined(CONFIG_USB_EHCI_MV)
226 static char *pxa168_sph_clock_name[] = {
227 [0] = "PXA168-USBCLK",
230 static struct mv_usb_platform_data pxa168_sph_pdata = {
231 .clknum = 1,
232 .clkname = pxa168_sph_clock_name,
233 .mode = MV_USB_MODE_HOST,
234 .phy_init = pxa_usb_phy_init,
235 .phy_deinit = pxa_usb_phy_deinit,
236 .set_vbus = NULL,
238 #endif
240 static void __init common_init(void)
242 mfp_config(ARRAY_AND_SIZE(common_pin_config));
244 /* on-chip devices */
245 pxa168_add_uart(1);
246 pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
247 pxa168_add_ssp(1);
248 pxa168_add_nand(&aspenite_nand_info);
249 pxa168_add_fb(&aspenite_lcd_info);
250 pxa168_add_keypad(&aspenite_keypad_info);
251 platform_device_register(&pxa168_device_gpio);
253 /* off-chip devices */
254 platform_device_register(&smc91x_device);
256 #if defined(CONFIG_USB_EHCI_MV)
257 pxa168_add_usb_host(&pxa168_sph_pdata);
258 #endif
261 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
262 .map_io = mmp_map_io,
263 .nr_irqs = MMP_NR_IRQS,
264 .init_irq = pxa168_init_irq,
265 .timer = &pxa168_timer,
266 .init_machine = common_init,
267 .restart = pxa168_restart,
268 MACHINE_END
270 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
271 .map_io = mmp_map_io,
272 .nr_irqs = MMP_NR_IRQS,
273 .init_irq = pxa168_init_irq,
274 .timer = &pxa168_timer,
275 .init_machine = common_init,
276 .restart = pxa168_restart,
277 MACHINE_END