1 /* linux/arch/arm/mach-msm/board-trout-mmc.c
2 ** Author: Brian Swetland <swetland@google.com>
4 #include <linux/gpio.h>
5 #include <linux/kernel.h>
6 #include <linux/init.h>
7 #include <linux/platform_device.h>
8 #include <linux/delay.h>
9 #include <linux/mmc/host.h>
10 #include <linux/mmc/sdio_ids.h>
11 #include <linux/err.h>
12 #include <linux/debugfs.h>
16 #include <mach/vreg.h>
18 #include <linux/platform_data/mmc-msm_sdcc.h>
22 #include "board-trout.h"
24 #include "proc_comm.h"
26 #define DEBUG_SDSLOT_VDD 1
28 /* ---- COMMON ---- */
29 static void config_gpio_table(uint32_t *table
, int len
)
33 for(n
= 0; n
< len
; n
++) {
35 msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX
, &id
, 0);
39 /* ---- SDCARD ---- */
41 static uint32_t sdcard_on_gpio_table
[] = {
42 PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_8MA
), /* CLK */
43 PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT
, GPIO_PULL_UP
, GPIO_8MA
), /* CMD */
44 PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT
, GPIO_PULL_UP
, GPIO_8MA
), /* DAT3 */
45 PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT
, GPIO_PULL_UP
, GPIO_8MA
), /* DAT2 */
46 PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT
, GPIO_PULL_UP
, GPIO_4MA
), /* DAT1 */
47 PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT
, GPIO_PULL_UP
, GPIO_4MA
), /* DAT0 */
50 static uint32_t sdcard_off_gpio_table
[] = {
51 PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_4MA
), /* CLK */
52 PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_4MA
), /* CMD */
53 PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_4MA
), /* DAT3 */
54 PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_4MA
), /* DAT2 */
55 PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_4MA
), /* DAT1 */
56 PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT
, GPIO_NO_PULL
, GPIO_4MA
), /* DAT0 */
59 static uint opt_disable_sdcard
;
61 static int __init
trout_disablesdcard_setup(char *str
)
63 int cal
= simple_strtol(str
, NULL
, 0);
65 opt_disable_sdcard
= cal
;
69 __setup("board_trout.disable_sdcard=", trout_disablesdcard_setup
);
71 static struct vreg
*vreg_sdslot
; /* SD slot power */
78 static struct mmc_vdd_xlat mmc_vdd_table
[] = {
79 { MMC_VDD_165_195
, 1800 },
80 { MMC_VDD_20_21
, 2050 },
81 { MMC_VDD_21_22
, 2150 },
82 { MMC_VDD_22_23
, 2250 },
83 { MMC_VDD_23_24
, 2350 },
84 { MMC_VDD_24_25
, 2450 },
85 { MMC_VDD_25_26
, 2550 },
86 { MMC_VDD_26_27
, 2650 },
87 { MMC_VDD_27_28
, 2750 },
88 { MMC_VDD_28_29
, 2850 },
89 { MMC_VDD_29_30
, 2950 },
92 static unsigned int sdslot_vdd
= 0xffffffff;
93 static unsigned int sdslot_vreg_enabled
;
95 static uint32_t trout_sdslot_switchvdd(struct device
*dev
, unsigned int vdd
)
101 if (vdd
== sdslot_vdd
)
108 printk("%s: Disabling SD slot power\n", __func__
);
110 config_gpio_table(sdcard_off_gpio_table
,
111 ARRAY_SIZE(sdcard_off_gpio_table
));
112 vreg_disable(vreg_sdslot
);
113 sdslot_vreg_enabled
= 0;
117 if (!sdslot_vreg_enabled
) {
118 rc
= vreg_enable(vreg_sdslot
);
120 printk(KERN_ERR
"%s: Error enabling vreg (%d)\n",
123 config_gpio_table(sdcard_on_gpio_table
,
124 ARRAY_SIZE(sdcard_on_gpio_table
));
125 sdslot_vreg_enabled
= 1;
128 for (i
= 0; i
< ARRAY_SIZE(mmc_vdd_table
); i
++) {
129 if (mmc_vdd_table
[i
].mask
== (1 << vdd
)) {
131 printk("%s: Setting level to %u\n",
132 __func__
, mmc_vdd_table
[i
].level
);
134 rc
= vreg_set_level(vreg_sdslot
,
135 mmc_vdd_table
[i
].level
);
138 "%s: Error setting vreg level (%d)\n",
145 printk(KERN_ERR
"%s: Invalid VDD %d specified\n", __func__
, vdd
);
149 static unsigned int trout_sdslot_status(struct device
*dev
)
153 status
= (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N
);
157 #define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
158 | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
159 | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
160 | MMC_VDD_28_29 | MMC_VDD_29_30
162 static struct msm_mmc_platform_data trout_sdslot_data
= {
163 .ocr_mask
= TROUT_MMC_VDD
,
164 .status
= trout_sdslot_status
,
165 .translate_vdd
= trout_sdslot_switchvdd
,
168 int __init
trout_init_mmc(unsigned int sys_rev
)
170 sdslot_vreg_enabled
= 0;
172 vreg_sdslot
= vreg_get(0, "gp6");
173 if (IS_ERR(vreg_sdslot
))
174 return PTR_ERR(vreg_sdslot
);
176 irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N
), 1);
178 if (!opt_disable_sdcard
)
179 msm_add_sdcc(2, &trout_sdslot_data
,
180 TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N
), 0);
182 printk(KERN_INFO
"trout: SD-Card interface disabled\n");