x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mach-omap1 / board-palmtt.c
blob2948b0ee4be872bf9f438b372f5afec322e1027e
1 /*
2 * linux/arch/arm/mach-omap1/board-palmtt.c
4 * Modified from board-palmtt2.c
6 * Modified and amended for Palm Tungsten|T
7 * by Marek Vasut <marek.vasut@gmail.com>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/platform_device.h>
19 #include <linux/notifier.h>
20 #include <linux/clk.h>
21 #include <linux/input.h>
22 #include <linux/interrupt.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/partitions.h>
25 #include <linux/mtd/physmap.h>
26 #include <linux/leds.h>
27 #include <linux/omapfb.h>
28 #include <linux/spi/spi.h>
29 #include <linux/spi/ads7846.h>
30 #include <linux/platform_data/omap1_bl.h>
31 #include <linux/platform_data/leds-omap.h>
33 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
37 #include <mach/flash.h>
38 #include <mach/mux.h>
39 #include <linux/omap-dma.h>
40 #include <mach/tc.h>
41 #include <mach/irda.h>
42 #include <linux/platform_data/keypad-omap.h>
44 #include <mach/hardware.h>
45 #include <mach/usb.h>
47 #include "common.h"
48 #include "dma.h"
50 #define PALMTT_USBDETECT_GPIO 0
51 #define PALMTT_CABLE_GPIO 1
52 #define PALMTT_LED_GPIO 3
53 #define PALMTT_PENIRQ_GPIO 6
54 #define PALMTT_MMC_WP_GPIO 8
55 #define PALMTT_HDQ_GPIO 11
57 static const unsigned int palmtt_keymap[] = {
58 KEY(0, 0, KEY_ESC),
59 KEY(1, 0, KEY_SPACE),
60 KEY(2, 0, KEY_LEFTCTRL),
61 KEY(3, 0, KEY_TAB),
62 KEY(4, 0, KEY_ENTER),
63 KEY(0, 1, KEY_LEFT),
64 KEY(1, 1, KEY_DOWN),
65 KEY(2, 1, KEY_UP),
66 KEY(3, 1, KEY_RIGHT),
67 KEY(0, 2, KEY_SLEEP),
68 KEY(4, 2, KEY_Y),
71 static struct mtd_partition palmtt_partitions[] = {
73 .name = "write8k",
74 .offset = 0,
75 .size = SZ_8K,
76 .mask_flags = 0,
79 .name = "PalmOS-BootLoader(ro)",
80 .offset = SZ_8K,
81 .size = 7 * SZ_8K,
82 .mask_flags = MTD_WRITEABLE,
85 .name = "u-boot",
86 .offset = MTDPART_OFS_APPEND,
87 .size = 8 * SZ_8K,
88 .mask_flags = 0,
91 .name = "PalmOS-FS(ro)",
92 .offset = MTDPART_OFS_APPEND,
93 .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
94 .mask_flags = MTD_WRITEABLE,
97 .name = "u-boot(rez)",
98 .offset = MTDPART_OFS_APPEND,
99 .size = SZ_128K,
100 .mask_flags = 0
103 .name = "empty",
104 .offset = MTDPART_OFS_APPEND,
105 .size = MTDPART_SIZ_FULL,
106 .mask_flags = 0
110 static struct physmap_flash_data palmtt_flash_data = {
111 .width = 2,
112 .set_vpp = omap1_set_vpp,
113 .parts = palmtt_partitions,
114 .nr_parts = ARRAY_SIZE(palmtt_partitions),
117 static struct resource palmtt_flash_resource = {
118 .start = OMAP_CS0_PHYS,
119 .end = OMAP_CS0_PHYS + SZ_8M - 1,
120 .flags = IORESOURCE_MEM,
123 static struct platform_device palmtt_flash_device = {
124 .name = "physmap-flash",
125 .id = 0,
126 .dev = {
127 .platform_data = &palmtt_flash_data,
129 .num_resources = 1,
130 .resource = &palmtt_flash_resource,
133 static struct resource palmtt_kp_resources[] = {
134 [0] = {
135 .start = INT_KEYBOARD,
136 .end = INT_KEYBOARD,
137 .flags = IORESOURCE_IRQ,
141 static const struct matrix_keymap_data palmtt_keymap_data = {
142 .keymap = palmtt_keymap,
143 .keymap_size = ARRAY_SIZE(palmtt_keymap),
146 static struct omap_kp_platform_data palmtt_kp_data = {
147 .rows = 6,
148 .cols = 3,
149 .keymap_data = &palmtt_keymap_data,
152 static struct platform_device palmtt_kp_device = {
153 .name = "omap-keypad",
154 .id = -1,
155 .dev = {
156 .platform_data = &palmtt_kp_data,
158 .num_resources = ARRAY_SIZE(palmtt_kp_resources),
159 .resource = palmtt_kp_resources,
162 static struct platform_device palmtt_lcd_device = {
163 .name = "lcd_palmtt",
164 .id = -1,
166 static struct omap_irda_config palmtt_irda_config = {
167 .transceiver_cap = IR_SIRMODE,
168 .rx_channel = OMAP_DMA_UART3_RX,
169 .tx_channel = OMAP_DMA_UART3_TX,
170 .dest_start = UART3_THR,
171 .src_start = UART3_RHR,
172 .tx_trigger = 0,
173 .rx_trigger = 0,
176 static struct resource palmtt_irda_resources[] = {
177 [0] = {
178 .start = INT_UART3,
179 .end = INT_UART3,
180 .flags = IORESOURCE_IRQ,
184 static struct platform_device palmtt_irda_device = {
185 .name = "omapirda",
186 .id = -1,
187 .dev = {
188 .platform_data = &palmtt_irda_config,
190 .num_resources = ARRAY_SIZE(palmtt_irda_resources),
191 .resource = palmtt_irda_resources,
194 static struct platform_device palmtt_spi_device = {
195 .name = "spi_palmtt",
196 .id = -1,
199 static struct omap_backlight_config palmtt_backlight_config = {
200 .default_intensity = 0xa0,
203 static struct platform_device palmtt_backlight_device = {
204 .name = "omap-bl",
205 .id = -1,
206 .dev = {
207 .platform_data= &palmtt_backlight_config,
211 static struct omap_led_config palmtt_led_config[] = {
213 .cdev = {
214 .name = "palmtt:led0",
216 .gpio = PALMTT_LED_GPIO,
220 static struct omap_led_platform_data palmtt_led_data = {
221 .nr_leds = ARRAY_SIZE(palmtt_led_config),
222 .leds = palmtt_led_config,
225 static struct platform_device palmtt_led_device = {
226 .name = "omap-led",
227 .id = -1,
228 .dev = {
229 .platform_data = &palmtt_led_data,
233 static struct platform_device *palmtt_devices[] __initdata = {
234 &palmtt_flash_device,
235 &palmtt_kp_device,
236 &palmtt_lcd_device,
237 &palmtt_irda_device,
238 &palmtt_spi_device,
239 &palmtt_backlight_device,
240 &palmtt_led_device,
243 static int palmtt_get_pendown_state(void)
245 return !gpio_get_value(6);
248 static const struct ads7846_platform_data palmtt_ts_info = {
249 .model = 7846,
250 .vref_delay_usecs = 100, /* internal, no capacitor */
251 .x_plate_ohms = 419,
252 .y_plate_ohms = 486,
253 .get_pendown_state = palmtt_get_pendown_state,
256 static struct spi_board_info __initdata palmtt_boardinfo[] = {
258 /* MicroWire (bus 2) CS0 has an ads7846e */
259 .modalias = "ads7846",
260 .platform_data = &palmtt_ts_info,
261 .max_speed_hz = 120000 /* max sample rate at 3V */
262 * 26 /* command + data + overhead */,
263 .bus_num = 2,
264 .chip_select = 0,
268 static struct omap_usb_config palmtt_usb_config __initdata = {
269 .register_dev = 1,
270 .hmc_mode = 0,
271 .pins[0] = 2,
274 static struct omap_lcd_config palmtt_lcd_config __initdata = {
275 .ctrl_name = "internal",
278 static void __init omap_mpu_wdt_mode(int mode) {
279 if (mode)
280 omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
281 else {
282 omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
283 omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
287 static void __init omap_palmtt_init(void)
289 /* mux pins for uarts */
290 omap_cfg_reg(UART1_TX);
291 omap_cfg_reg(UART1_RTS);
292 omap_cfg_reg(UART2_TX);
293 omap_cfg_reg(UART2_RTS);
294 omap_cfg_reg(UART3_TX);
295 omap_cfg_reg(UART3_RX);
297 omap_mpu_wdt_mode(0);
299 platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
301 palmtt_boardinfo[0].irq = gpio_to_irq(6);
302 spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
303 omap_serial_init();
304 omap1_usb_init(&palmtt_usb_config);
305 omap_register_i2c_bus(1, 100, NULL, 0);
307 omapfb_set_lcd_config(&palmtt_lcd_config);
310 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
311 .atag_offset = 0x100,
312 .map_io = omap15xx_map_io,
313 .init_early = omap1_init_early,
314 .init_irq = omap1_init_irq,
315 .init_machine = omap_palmtt_init,
316 .init_late = omap1_init_late,
317 .timer = &omap1_timer,
318 .restart = omap1_restart,
319 MACHINE_END