?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mach-omap2 / board-devkit8000.c
blob12865af25d3a865b351e8dff3b8cb5fc20649ca5
1 /*
2 * board-devkit8000.c - TimLL Devkit8000
3 *
4 * Copyright (C) 2009 Kim Botherway
5 * Copyright (C) 2010 Thomas Weber
6 *
7 * Modified from mach-omap2/board-omap3beagle.c
8 *
9 * Initial code: Syed Mohammed Khasim
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/platform_device.h>
19 #include <linux/delay.h>
20 #include <linux/err.h>
21 #include <linux/clk.h>
22 #include <linux/io.h>
23 #include <linux/leds.h>
24 #include <linux/gpio.h>
25 #include <linux/input.h>
26 #include <linux/gpio_keys.h>
27
28 #include <linux/mtd/mtd.h>
29 #include <linux/mtd/partitions.h>
30 #include <linux/mtd/nand.h>
31 #include <linux/mmc/host.h>
32
33 #include <linux/regulator/machine.h>
34 #include <linux/i2c/twl.h>
35 #include "id.h"
36 #include <asm/mach-types.h>
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/flash.h>
40
41 #include "common.h"
42 #include "gpmc.h"
43 #include <linux/platform_data/mtd-nand-omap2.h>
44 #include <video/omapdss.h>
45 #include <video/omap-panel-generic-dpi.h>
46 #include <video/omap-panel-tfp410.h>
47
48 #include <linux/platform_data/spi-omap2-mcspi.h>
49 #include <linux/input/matrix_keypad.h>
50 #include <linux/spi/spi.h>
51 #include <linux/dm9000.h>
52 #include <linux/interrupt.h>
53
54 #include "sdram-micron-mt46h32m32lf-6.h"
55 #include "mux.h"
56 #include "hsmmc.h"
57 #include "board-flash.h"
58 #include "common-board-devices.h"
59
60 #define NAND_CS 0
61
62 #define OMAP_DM9000_GPIO_IRQ 25
63 #define OMAP3_DEVKIT_TS_GPIO 27
64
65 static struct mtd_partition devkit8000_nand_partitions[] = {
66 /* All the partition sizes are listed in terms of NAND block size */
67 {
68 .name = "X-Loader",
69 .offset = 0,
70 .size = 4 * NAND_BLOCK_SIZE,
71 .mask_flags = MTD_WRITEABLE, /* force read-only */
72 },
73 {
74 .name = "U-Boot",
75 .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
76 .size = 15 * NAND_BLOCK_SIZE,
77 .mask_flags = MTD_WRITEABLE, /* force read-only */
78 },
79 {
80 .name = "U-Boot Env",
81 .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
82 .size = 1 * NAND_BLOCK_SIZE,
83 },
84 {
85 .name = "Kernel",
86 .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
87 .size = 32 * NAND_BLOCK_SIZE,
88 },
89 {
90 .name = "File System",
91 .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
92 .size = MTDPART_SIZ_FULL,
93 },
94 };
95
96 static struct omap2_hsmmc_info mmc[] = {
97 {
98 .mmc = 1,
99 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
100 .gpio_wp = 29,
101 .deferred = true,
102 },
103 {} /* Terminator */
104 };
105
106 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
107 {
108 if (gpio_is_valid(dssdev->reset_gpio))
109 gpio_set_value_cansleep(dssdev->reset_gpio, 1);
110 return 0;
111 }
112
113 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
114 {
115 if (gpio_is_valid(dssdev->reset_gpio))
116 gpio_set_value_cansleep(dssdev->reset_gpio, 0);
117 }
118
119 static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
120 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
121 };
122
123 /* ads7846 on SPI */
124 static struct regulator_consumer_supply devkit8000_vio_supply[] = {
125 REGULATOR_SUPPLY("vcc", "spi2.0"),
126 };
127
128 static struct panel_generic_dpi_data lcd_panel = {
129 .name = "innolux_at070tn83",
130 .platform_enable = devkit8000_panel_enable_lcd,
131 .platform_disable = devkit8000_panel_disable_lcd,
132 };
133
134 static struct omap_dss_device devkit8000_lcd_device = {
135 .name = "lcd",
136 .type = OMAP_DISPLAY_TYPE_DPI,
137 .driver_name = "generic_dpi_panel",
138 .data = &lcd_panel,
139 .phy.dpi.data_lines = 24,
140 };
141
142 static struct tfp410_platform_data dvi_panel = {
143 .power_down_gpio = -1,
144 .i2c_bus_num = 1,
145 };
146
147 static struct omap_dss_device devkit8000_dvi_device = {
148 .name = "dvi",
149 .type = OMAP_DISPLAY_TYPE_DPI,
150 .driver_name = "tfp410",
151 .data = &dvi_panel,
152 .phy.dpi.data_lines = 24,
153 };
154
155 static struct omap_dss_device devkit8000_tv_device = {
156 .name = "tv",
157 .driver_name = "venc",
158 .type = OMAP_DISPLAY_TYPE_VENC,
159 .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
160 };
161
162
163 static struct omap_dss_device *devkit8000_dss_devices[] = {
164 &devkit8000_lcd_device,
165 &devkit8000_dvi_device,
166 &devkit8000_tv_device,
167 };
168
169 static struct omap_dss_board_info devkit8000_dss_data = {
170 .num_devices = ARRAY_SIZE(devkit8000_dss_devices),
171 .devices = devkit8000_dss_devices,
172 .default_device = &devkit8000_lcd_device,
173 };
174
175 static uint32_t board_keymap[] = {
176 KEY(0, 0, KEY_1),
177 KEY(1, 0, KEY_2),
178 KEY(2, 0, KEY_3),
179 KEY(0, 1, KEY_4),
180 KEY(1, 1, KEY_5),
181 KEY(2, 1, KEY_6),
182 KEY(3, 1, KEY_F5),
183 KEY(0, 2, KEY_7),
184 KEY(1, 2, KEY_8),
185 KEY(2, 2, KEY_9),
186 KEY(3, 2, KEY_F6),
187 KEY(0, 3, KEY_F7),
188 KEY(1, 3, KEY_0),
189 KEY(2, 3, KEY_F8),
190 PERSISTENT_KEY(4, 5),
191 KEY(4, 4, KEY_VOLUMEUP),
192 KEY(5, 5, KEY_VOLUMEDOWN),
193 0
194 };
195
196 static struct matrix_keymap_data board_map_data = {
197 .keymap = board_keymap,
198 .keymap_size = ARRAY_SIZE(board_keymap),
199 };
200
201 static struct twl4030_keypad_data devkit8000_kp_data = {
202 .keymap_data = &board_map_data,
203 .rows = 6,
204 .cols = 6,
205 .rep = 1,
206 };
207
208 static struct gpio_led gpio_leds[];
209
210 static int devkit8000_twl_gpio_setup(struct device *dev,
211 unsigned gpio, unsigned ngpio)
212 {
213 int ret;
214
215 /* gpio + 0 is "mmc0_cd" (input/IRQ) */
216 mmc[0].gpio_cd = gpio + 0;
217 omap_hsmmc_late_init(mmc);
218
219 /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
220 gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
221
222 /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
223 devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
224 ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
225 GPIOF_OUT_INIT_LOW, "LCD_PWREN");
226 if (ret < 0) {
227 devkit8000_lcd_device.reset_gpio = -EINVAL;
228 printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
229 }
230
231 /* gpio + 7 is "DVI_PD" (out, active low) */
232 dvi_panel.power_down_gpio = gpio + 7;
233
234 return 0;
235 }
236
237 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
238 .use_leds = true,
239 .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
240 | BIT(15) | BIT(16) | BIT(17),
241 .setup = devkit8000_twl_gpio_setup,
242 };
243
244 static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
245 REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
246 REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
247 };
248
249 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
250 static struct regulator_init_data devkit8000_vmmc1 = {
251 .constraints = {
252 .min_uV = 1850000,
253 .max_uV = 3150000,
254 .valid_modes_mask = REGULATOR_MODE_NORMAL
255 | REGULATOR_MODE_STANDBY,
256 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
257 | REGULATOR_CHANGE_MODE
258 | REGULATOR_CHANGE_STATUS,
259 },
260 .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply),
261 .consumer_supplies = devkit8000_vmmc1_supply,
262 };
263
264 /* VPLL1 for digital video outputs */
265 static struct regulator_init_data devkit8000_vpll1 = {
266 .constraints = {
267 .min_uV = 1800000,
268 .max_uV = 1800000,
269 .valid_modes_mask = REGULATOR_MODE_NORMAL
270 | REGULATOR_MODE_STANDBY,
271 .valid_ops_mask = REGULATOR_CHANGE_MODE
272 | REGULATOR_CHANGE_STATUS,
273 },
274 .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies),
275 .consumer_supplies = devkit8000_vpll1_supplies,
276 };
277
278 /* VAUX4 for ads7846 and nubs */
279 static struct regulator_init_data devkit8000_vio = {
280 .constraints = {
281 .min_uV = 1800000,
282 .max_uV = 1800000,
283 .apply_uV = true,
284 .valid_modes_mask = REGULATOR_MODE_NORMAL
285 | REGULATOR_MODE_STANDBY,
286 .valid_ops_mask = REGULATOR_CHANGE_MODE
287 | REGULATOR_CHANGE_STATUS,
288 },
289 .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply),
290 .consumer_supplies = devkit8000_vio_supply,
291 };
292
293 static struct twl4030_platform_data devkit8000_twldata = {
294 /* platform_data for children goes here */
295 .gpio = &devkit8000_gpio_data,
296 .vmmc1 = &devkit8000_vmmc1,
297 .vpll1 = &devkit8000_vpll1,
298 .vio = &devkit8000_vio,
299 .keypad = &devkit8000_kp_data,
300 };
301
302 static int __init devkit8000_i2c_init(void)
303 {
304 omap3_pmic_get_config(&devkit8000_twldata,
305 TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
306 TWL_COMMON_REGULATOR_VDAC);
307 omap3_pmic_init("tps65930", &devkit8000_twldata);
308 /* Bus 3 is attached to the DVI port where devices like the pico DLP
309 * projector don't work reliably with 400kHz */
310 omap_register_i2c_bus(3, 400, NULL, 0);
311 return 0;
312 }
313
314 static struct gpio_led gpio_leds[] = {
315 {
316 .name = "led1",
317 .default_trigger = "heartbeat",
318 .gpio = 186,
319 .active_low = true,
320 },
321 {
322 .name = "led2",
323 .default_trigger = "mmc0",
324 .gpio = 163,
325 .active_low = true,
326 },
327 {
328 .name = "ledB",
329 .default_trigger = "none",
330 .gpio = 153,
331 .active_low = true,
332 },
333 {
334 .name = "led3",
335 .default_trigger = "none",
336 .gpio = 164,
337 .active_low = true,
338 },
339 };
340
341 static struct gpio_led_platform_data gpio_led_info = {
342 .leds = gpio_leds,
343 .num_leds = ARRAY_SIZE(gpio_leds),
344 };
345
346 static struct platform_device leds_gpio = {
347 .name = "leds-gpio",
348 .id = -1,
349 .dev = {
350 .platform_data = &gpio_led_info,
351 },
352 };
353
354 static struct gpio_keys_button gpio_buttons[] = {
355 {
356 .code = BTN_EXTRA,
357 .gpio = 26,
358 .desc = "user",
359 .wakeup = 1,
360 },
361 };
362
363 static struct gpio_keys_platform_data gpio_key_info = {
364 .buttons = gpio_buttons,
365 .nbuttons = ARRAY_SIZE(gpio_buttons),
366 };
367
368 static struct platform_device keys_gpio = {
369 .name = "gpio-keys",
370 .id = -1,
371 .dev = {
372 .platform_data = &gpio_key_info,
373 },
374 };
375
376 #define OMAP_DM9000_BASE 0x2c000000
377
378 static struct resource omap_dm9000_resources[] = {
379 [0] = {
380 .start = OMAP_DM9000_BASE,
381 .end = (OMAP_DM9000_BASE + 0x4 - 1),
382 .flags = IORESOURCE_MEM,
383 },
384 [1] = {
385 .start = (OMAP_DM9000_BASE + 0x400),
386 .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
387 .flags = IORESOURCE_MEM,
388 },
389 [2] = {
390 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
391 },
392 };
393
394 static struct dm9000_plat_data omap_dm9000_platdata = {
395 .flags = DM9000_PLATF_16BITONLY,
396 };
397
398 static struct platform_device omap_dm9000_dev = {
399 .name = "dm9000",
400 .id = -1,
401 .num_resources = ARRAY_SIZE(omap_dm9000_resources),
402 .resource = omap_dm9000_resources,
403 .dev = {
404 .platform_data = &omap_dm9000_platdata,
405 },
406 };
407
408 static void __init omap_dm9000_init(void)
409 {
410 unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
411 struct omap_die_id odi;
412 int ret;
413
414 ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq");
415 if (ret < 0) {
416 printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
417 OMAP_DM9000_GPIO_IRQ);
418 return;
419 }
420
421 /* init the mac address using DIE id */
422 omap_get_die_id(&odi);
423
424 eth_addr[0] = 0x02; /* locally administered */
425 eth_addr[1] = odi.id_1 & 0xff;
426 eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
427 eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
428 eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
429 eth_addr[5] = (odi.id_0 & 0x000000ff);
430 }
431
432 static struct platform_device *devkit8000_devices[] __initdata = {
433 &leds_gpio,
434 &keys_gpio,
435 &omap_dm9000_dev,
436 };
437
438 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
439
440 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
441 .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
442 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
443
444 .phy_reset = true,
445 .reset_gpio_port[0] = -EINVAL,
446 .reset_gpio_port[1] = -EINVAL,
447 .reset_gpio_port[2] = -EINVAL
448 };
449
450 #ifdef CONFIG_OMAP_MUX
451 static struct omap_board_mux board_mux[] __initdata = {
452 /* nCS and IRQ for Devkit8000 ethernet */
453 OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
454 OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
455
456 /* McSPI 2*/
457 OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
458 OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
459 OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
460 OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
461 OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
462
463 /* PENDOWN GPIO */
464 OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
465
466 /* mUSB */
467 OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
468 OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
469 OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
470 OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
471 OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
472 OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
473 OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
474 OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
475 OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
476 OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
477 OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
478 OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
479
480 /* USB 1 */
481 OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
482 OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
483 OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
484 OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
485 OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
486 OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
487 OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
488 OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
489 OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
490 OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
491 OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
492 OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
493
494 /* MMC 1 */
495 OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
496 OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
497 OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
498 OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
499 OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
500 OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
501 OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
502 OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
503 OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
504 OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
505
506 /* McBSP 2 */
507 OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
508 OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
509 OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
510 OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
511
512 /* I2C 1 */
513 OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
514 OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
515
516 /* I2C 2 */
517 OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
518 OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
519
520 /* I2C 3 */
521 OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
522 OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
523
524 /* I2C 4 */
525 OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
526 OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
527
528 /* serial ports */
529 OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
530 OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
531 OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
532 OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
533
534 /* DSS */
535 OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
536 OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
537 OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
538 OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
539 OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
540 OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
541 OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
542 OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
543 OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
544 OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
545 OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
546 OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
547 OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
548 OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
549 OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
550 OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
551 OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
552 OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
553 OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
554 OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
555 OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
556 OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
557 OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
558 OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
559 OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
560 OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
561 OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
562 OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
563
564 /* expansion port */
565 /* McSPI 1 */
566 OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
567 OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
568 OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
569 OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
570 OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
571
572 /* HDQ */
573 OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
574
575 /* McSPI4 */
576 OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
577 OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
578 OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
579 OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
580
581 /* MMC 2 */
582 OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
583 OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
584 OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
585 OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
586
587 /* I2C3 */
588 OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
589 OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
590
591 OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
592 OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
593 OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
594
595 OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
596 OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
597
598 /* TPS IRQ */
599 OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
600 OMAP_PIN_INPUT_PULLUP),
601
602 { .reg_offset = OMAP_MUX_TERMINATOR },
603 };
604 #endif
605
606 static void __init devkit8000_init(void)
607 {
608 omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
609 omap_serial_init();
610 omap_sdrc_init(mt46h32m32lf6_sdrc_params,
611 mt46h32m32lf6_sdrc_params);
612
613 omap_dm9000_init();
614
615 omap_hsmmc_init(mmc);
616 devkit8000_i2c_init();
617 omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
618 platform_add_devices(devkit8000_devices,
619 ARRAY_SIZE(devkit8000_devices));
620
621 omap_display_init(&devkit8000_dss_data);
622
623 omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
624
625 usb_musb_init(NULL);
626 usbhs_init(&usbhs_bdata);
627 board_nand_init(devkit8000_nand_partitions,
628 ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
629 NAND_BUSWIDTH_16, NULL);
630 omap_twl4030_audio_init("omap3beagle");
631
632 /* Ensure SDRC pins are mux'd for self-refresh */
633 omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
634 omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
635 }
636
637 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
638 .atag_offset = 0x100,
639 .reserve = omap_reserve,
640 .map_io = omap3_map_io,
641 .init_early = omap35xx_init_early,
642 .init_irq = omap3_init_irq,
643 .handle_irq = omap3_intc_handle_irq,
644 .init_machine = devkit8000_init,
645 .init_late = omap35xx_init_late,
646 .timer = &omap3_secure_timer,
647 .restart = omap3xxx_restart,
648 MACHINE_END
Linux with added FPC-III support