?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mach-pxa / em-x270.c
blob1b6411439ec882ca57173e7e02452d9c1661d73c
1 /*
2 * Support for CompuLab EM-X270 platform
3 *
4 * Copyright (C) 2007, 2008 CompuLab, Ltd.
5 * Author: Mike Rapoport <mike@compulab.co.il>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12 #include <linux/irq.h>
13 #include <linux/platform_device.h>
14 #include <linux/delay.h>
15
16 #include <linux/dm9000.h>
17 #include <linux/rtc-v3020.h>
18 #include <linux/mtd/nand.h>
19 #include <linux/mtd/partitions.h>
20 #include <linux/mtd/physmap.h>
21 #include <linux/input.h>
22 #include <linux/gpio_keys.h>
23 #include <linux/gpio.h>
24 #include <linux/mfd/da903x.h>
25 #include <linux/regulator/machine.h>
26 #include <linux/spi/spi.h>
27 #include <linux/spi/tdo24m.h>
28 #include <linux/spi/libertas_spi.h>
29 #include <linux/spi/pxa2xx_spi.h>
30 #include <linux/power_supply.h>
31 #include <linux/apm-emulation.h>
32 #include <linux/i2c.h>
33 #include <linux/i2c/pca953x.h>
34 #include <linux/i2c/pxa-i2c.h>
35 #include <linux/regulator/userspace-consumer.h>
36
37 #include <media/soc_camera.h>
38
39 #include <asm/mach-types.h>
40 #include <asm/mach/arch.h>
41
42 #include <mach/pxa27x.h>
43 #include <mach/pxa27x-udc.h>
44 #include <mach/audio.h>
45 #include <linux/platform_data/video-pxafb.h>
46 #include <linux/platform_data/usb-ohci-pxa27x.h>
47 #include <linux/platform_data/mmc-pxamci.h>
48 #include <linux/platform_data/keypad-pxa27x.h>
49 #include <linux/platform_data/camera-pxa.h>
50
51 #include "generic.h"
52 #include "devices.h"
53
54 /* EM-X270 specific GPIOs */
55 #define GPIO13_MMC_CD (13)
56 #define GPIO95_MMC_WP (95)
57 #define GPIO56_NAND_RB (56)
58 #define GPIO93_CAM_RESET (93)
59 #define GPIO16_USB_HUB_RESET (16)
60
61 /* eXeda specific GPIOs */
62 #define GPIO114_MMC_CD (114)
63 #define GPIO20_NAND_RB (20)
64 #define GPIO38_SD_PWEN (38)
65 #define GPIO37_WLAN_RST (37)
66 #define GPIO95_TOUCHPAD_INT (95)
67 #define GPIO130_CAM_RESET (130)
68 #define GPIO10_USB_HUB_RESET (10)
69
70 /* common GPIOs */
71 #define GPIO11_NAND_CS (11)
72 #define GPIO41_ETHIRQ (41)
73 #define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
74 #define GPIO115_WLAN_PWEN (115)
75 #define GPIO19_WLAN_STRAP (19)
76 #define GPIO9_USB_VBUS_EN (9)
77
78 static int mmc_cd;
79 static int nand_rb;
80 static int dm9000_flags;
81 static int cam_reset;
82 static int usb_hub_reset;
83
84 static unsigned long common_pin_config[] = {
85 /* AC'97 */
86 GPIO28_AC97_BITCLK,
87 GPIO29_AC97_SDATA_IN_0,
88 GPIO30_AC97_SDATA_OUT,
89 GPIO31_AC97_SYNC,
90 GPIO98_AC97_SYSCLK,
91 GPIO113_AC97_nRESET,
92
93 /* BTUART */
94 GPIO42_BTUART_RXD,
95 GPIO43_BTUART_TXD,
96 GPIO44_BTUART_CTS,
97 GPIO45_BTUART_RTS,
98
99 /* STUART */
100 GPIO46_STUART_RXD,
101 GPIO47_STUART_TXD,
102
103 /* MCI controller */
104 GPIO32_MMC_CLK,
105 GPIO112_MMC_CMD,
106 GPIO92_MMC_DAT_0,
107 GPIO109_MMC_DAT_1,
108 GPIO110_MMC_DAT_2,
109 GPIO111_MMC_DAT_3,
110
111 /* LCD */
112 GPIOxx_LCD_TFT_16BPP,
113
114 /* QCI */
115 GPIO84_CIF_FV,
116 GPIO25_CIF_LV,
117 GPIO53_CIF_MCLK,
118 GPIO54_CIF_PCLK,
119 GPIO81_CIF_DD_0,
120 GPIO55_CIF_DD_1,
121 GPIO51_CIF_DD_2,
122 GPIO50_CIF_DD_3,
123 GPIO52_CIF_DD_4,
124 GPIO48_CIF_DD_5,
125 GPIO17_CIF_DD_6,
126 GPIO12_CIF_DD_7,
127
128 /* I2C */
129 GPIO117_I2C_SCL,
130 GPIO118_I2C_SDA,
131
132 /* Keypad */
133 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
134 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
135 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
136 GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
137 GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
138 GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
139 GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
140 GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
141 GPIO103_KP_MKOUT_0,
142 GPIO104_KP_MKOUT_1,
143 GPIO105_KP_MKOUT_2,
144 GPIO106_KP_MKOUT_3,
145 GPIO107_KP_MKOUT_4,
146 GPIO108_KP_MKOUT_5,
147 GPIO96_KP_MKOUT_6,
148 GPIO22_KP_MKOUT_7,
149
150 /* SSP1 */
151 GPIO26_SSP1_RXD,
152 GPIO23_SSP1_SCLK,
153 GPIO24_SSP1_SFRM,
154 GPIO57_SSP1_TXD,
155
156 /* SSP2 */
157 GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
158 GPIO14_GPIO,
159 GPIO89_SSP2_TXD,
160 GPIO88_SSP2_RXD,
161
162 /* SDRAM and local bus */
163 GPIO15_nCS_1,
164 GPIO78_nCS_2,
165 GPIO79_nCS_3,
166 GPIO80_nCS_4,
167 GPIO49_nPWE,
168 GPIO18_RDY,
169
170 /* GPIO */
171 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
172
173 /* power controls */
174 GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
175 GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
176
177 /* NAND controls */
178 GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
179
180 /* interrupts */
181 GPIO41_GPIO, /* DM9000 interrupt */
182 };
183
184 static unsigned long em_x270_pin_config[] = {
185 GPIO13_GPIO, /* MMC card detect */
186 GPIO16_GPIO, /* USB hub reset */
187 GPIO56_GPIO, /* NAND Ready/Busy */
188 GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
189 GPIO95_GPIO, /* MMC Write protect */
190 };
191
192 static unsigned long exeda_pin_config[] = {
193 GPIO10_GPIO, /* USB hub reset */
194 GPIO20_GPIO, /* NAND Ready/Busy */
195 GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
196 GPIO95_GPIO, /* touchpad IRQ */
197 GPIO114_GPIO, /* MMC card detect */
198 };
199
200 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
201 static struct resource em_x270_dm9000_resource[] = {
202 [0] = {
203 .start = PXA_CS2_PHYS,
204 .end = PXA_CS2_PHYS + 3,
205 .flags = IORESOURCE_MEM,
206 },
207 [1] = {
208 .start = PXA_CS2_PHYS + 8,
209 .end = PXA_CS2_PHYS + 8 + 0x3f,
210 .flags = IORESOURCE_MEM,
211 },
212 [2] = {
213 .start = EM_X270_ETHIRQ,
214 .end = EM_X270_ETHIRQ,
215 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
216 }
217 };
218
219 static struct dm9000_plat_data em_x270_dm9000_platdata = {
220 .flags = DM9000_PLATF_NO_EEPROM,
221 };
222
223 static struct platform_device em_x270_dm9000 = {
224 .name = "dm9000",
225 .id = 0,
226 .num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
227 .resource = em_x270_dm9000_resource,
228 .dev = {
229 .platform_data = &em_x270_dm9000_platdata,
230 }
231 };
232
233 static void __init em_x270_init_dm9000(void)
234 {
235 em_x270_dm9000_platdata.flags |= dm9000_flags;
236 platform_device_register(&em_x270_dm9000);
237 }
238 #else
239 static inline void em_x270_init_dm9000(void) {}
240 #endif
241
242 /* V3020 RTC */
243 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
244 static struct resource em_x270_v3020_resource[] = {
245 [0] = {
246 .start = PXA_CS4_PHYS,
247 .end = PXA_CS4_PHYS + 3,
248 .flags = IORESOURCE_MEM,
249 },
250 };
251
252 static struct v3020_platform_data em_x270_v3020_platdata = {
253 .leftshift = 0,
254 };
255
256 static struct platform_device em_x270_rtc = {
257 .name = "v3020",
258 .num_resources = ARRAY_SIZE(em_x270_v3020_resource),
259 .resource = em_x270_v3020_resource,
260 .id = -1,
261 .dev = {
262 .platform_data = &em_x270_v3020_platdata,
263 }
264 };
265
266 static void __init em_x270_init_rtc(void)
267 {
268 platform_device_register(&em_x270_rtc);
269 }
270 #else
271 static inline void em_x270_init_rtc(void) {}
272 #endif
273
274 /* NAND flash */
275 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
276 static inline void nand_cs_on(void)
277 {
278 gpio_set_value(GPIO11_NAND_CS, 0);
279 }
280
281 static void nand_cs_off(void)
282 {
283 dsb();
284
285 gpio_set_value(GPIO11_NAND_CS, 1);
286 }
287
288 /* hardware specific access to control-lines */
289 static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
290 unsigned int ctrl)
291 {
292 struct nand_chip *this = mtd->priv;
293 unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
294
295 dsb();
296
297 if (ctrl & NAND_CTRL_CHANGE) {
298 if (ctrl & NAND_ALE)
299 nandaddr |= (1 << 3);
300 else
301 nandaddr &= ~(1 << 3);
302 if (ctrl & NAND_CLE)
303 nandaddr |= (1 << 2);
304 else
305 nandaddr &= ~(1 << 2);
306 if (ctrl & NAND_NCE)
307 nand_cs_on();
308 else
309 nand_cs_off();
310 }
311
312 dsb();
313 this->IO_ADDR_W = (void __iomem *)nandaddr;
314 if (dat != NAND_CMD_NONE)
315 writel(dat, this->IO_ADDR_W);
316
317 dsb();
318 }
319
320 /* read device ready pin */
321 static int em_x270_nand_device_ready(struct mtd_info *mtd)
322 {
323 dsb();
324
325 return gpio_get_value(nand_rb);
326 }
327
328 static struct mtd_partition em_x270_partition_info[] = {
329 [0] = {
330 .name = "em_x270-0",
331 .offset = 0,
332 .size = SZ_4M,
333 },
334 [1] = {
335 .name = "em_x270-1",
336 .offset = MTDPART_OFS_APPEND,
337 .size = MTDPART_SIZ_FULL
338 },
339 };
340
341 struct platform_nand_data em_x270_nand_platdata = {
342 .chip = {
343 .nr_chips = 1,
344 .chip_offset = 0,
345 .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
346 .partitions = em_x270_partition_info,
347 .chip_delay = 20,
348 },
349 .ctrl = {
350 .hwcontrol = 0,
351 .dev_ready = em_x270_nand_device_ready,
352 .select_chip = 0,
353 .cmd_ctrl = em_x270_nand_cmd_ctl,
354 },
355 };
356
357 static struct resource em_x270_nand_resource[] = {
358 [0] = {
359 .start = PXA_CS1_PHYS,
360 .end = PXA_CS1_PHYS + 12,
361 .flags = IORESOURCE_MEM,
362 },
363 };
364
365 static struct platform_device em_x270_nand = {
366 .name = "gen_nand",
367 .num_resources = ARRAY_SIZE(em_x270_nand_resource),
368 .resource = em_x270_nand_resource,
369 .id = -1,
370 .dev = {
371 .platform_data = &em_x270_nand_platdata,
372 }
373 };
374
375 static void __init em_x270_init_nand(void)
376 {
377 int err;
378
379 err = gpio_request(GPIO11_NAND_CS, "NAND CS");
380 if (err) {
381 pr_warning("EM-X270: failed to request NAND CS gpio\n");
382 return;
383 }
384
385 gpio_direction_output(GPIO11_NAND_CS, 1);
386
387 err = gpio_request(nand_rb, "NAND R/B");
388 if (err) {
389 pr_warning("EM-X270: failed to request NAND R/B gpio\n");
390 gpio_free(GPIO11_NAND_CS);
391 return;
392 }
393
394 gpio_direction_input(nand_rb);
395
396 platform_device_register(&em_x270_nand);
397 }
398 #else
399 static inline void em_x270_init_nand(void) {}
400 #endif
401
402 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
403 static struct mtd_partition em_x270_nor_parts[] = {
404 {
405 .name = "Bootloader",
406 .offset = 0x00000000,
407 .size = 0x00050000,
408 .mask_flags = MTD_WRITEABLE /* force read-only */
409 }, {
410 .name = "Environment",
411 .offset = 0x00050000,
412 .size = 0x00010000,
413 }, {
414 .name = "Reserved",
415 .offset = 0x00060000,
416 .size = 0x00050000,
417 .mask_flags = MTD_WRITEABLE /* force read-only */
418 }, {
419 .name = "Splashscreen",
420 .offset = 0x000b0000,
421 .size = 0x00050000,
422 }
423 };
424
425 static struct physmap_flash_data em_x270_nor_data[] = {
426 [0] = {
427 .width = 2,
428 .parts = em_x270_nor_parts,
429 .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
430 },
431 };
432
433 static struct resource em_x270_nor_flash_resource = {
434 .start = PXA_CS0_PHYS,
435 .end = PXA_CS0_PHYS + SZ_1M - 1,
436 .flags = IORESOURCE_MEM,
437 };
438
439 static struct platform_device em_x270_physmap_flash = {
440 .name = "physmap-flash",
441 .id = 0,
442 .num_resources = 1,
443 .resource = &em_x270_nor_flash_resource,
444 .dev = {
445 .platform_data = &em_x270_nor_data,
446 },
447 };
448
449 static void __init em_x270_init_nor(void)
450 {
451 platform_device_register(&em_x270_physmap_flash);
452 }
453 #else
454 static inline void em_x270_init_nor(void) {}
455 #endif
456
457 /* PXA27x OHCI controller setup */
458 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
459 static struct regulator *em_x270_usb_ldo;
460
461 static int em_x270_usb_hub_init(void)
462 {
463 int err;
464
465 em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
466 if (IS_ERR(em_x270_usb_ldo))
467 return PTR_ERR(em_x270_usb_ldo);
468
469 err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
470 if (err)
471 goto err_free_usb_ldo;
472
473 err = gpio_request(usb_hub_reset, "hub rst");
474 if (err)
475 goto err_free_vbus_gpio;
476
477 /* USB Hub power-on and reset */
478 gpio_direction_output(usb_hub_reset, 1);
479 gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
480 regulator_enable(em_x270_usb_ldo);
481 gpio_set_value(usb_hub_reset, 0);
482 gpio_set_value(usb_hub_reset, 1);
483 regulator_disable(em_x270_usb_ldo);
484 regulator_enable(em_x270_usb_ldo);
485 gpio_set_value(usb_hub_reset, 0);
486 gpio_set_value(GPIO9_USB_VBUS_EN, 1);
487
488 return 0;
489
490 err_free_vbus_gpio:
491 gpio_free(GPIO9_USB_VBUS_EN);
492 err_free_usb_ldo:
493 regulator_put(em_x270_usb_ldo);
494
495 return err;
496 }
497
498 static int em_x270_ohci_init(struct device *dev)
499 {
500 int err;
501
502 /* we don't want to entirely disable USB if the HUB init failed */
503 err = em_x270_usb_hub_init();
504 if (err)
505 pr_err("USB Hub initialization failed: %d\n", err);
506
507 /* enable port 2 transiever */
508 UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
509
510 return 0;
511 }
512
513 static void em_x270_ohci_exit(struct device *dev)
514 {
515 gpio_free(usb_hub_reset);
516 gpio_free(GPIO9_USB_VBUS_EN);
517
518 if (!IS_ERR(em_x270_usb_ldo)) {
519 if (regulator_is_enabled(em_x270_usb_ldo))
520 regulator_disable(em_x270_usb_ldo);
521
522 regulator_put(em_x270_usb_ldo);
523 }
524 }
525
526 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
527 .port_mode = PMM_PERPORT_MODE,
528 .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
529 .init = em_x270_ohci_init,
530 .exit = em_x270_ohci_exit,
531 };
532
533 static void __init em_x270_init_ohci(void)
534 {
535 pxa_set_ohci_info(&em_x270_ohci_platform_data);
536 }
537 #else
538 static inline void em_x270_init_ohci(void) {}
539 #endif
540
541 /* MCI controller setup */
542 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
543 static struct regulator *em_x270_sdio_ldo;
544
545 static int em_x270_mci_init(struct device *dev,
546 irq_handler_t em_x270_detect_int,
547 void *data)
548 {
549 int err;
550
551 em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
552 if (IS_ERR(em_x270_sdio_ldo)) {
553 dev_err(dev, "can't request SDIO power supply: %ld\n",
554 PTR_ERR(em_x270_sdio_ldo));
555 return PTR_ERR(em_x270_sdio_ldo);
556 }
557
558 err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
559 IRQF_DISABLED | IRQF_TRIGGER_RISING |
560 IRQF_TRIGGER_FALLING,
561 "MMC card detect", data);
562 if (err) {
563 dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
564 goto err_irq;
565 }
566
567 if (machine_is_em_x270()) {
568 err = gpio_request(GPIO95_MMC_WP, "MMC WP");
569 if (err) {
570 dev_err(dev, "can't request MMC write protect: %d\n",
571 err);
572 goto err_gpio_wp;
573 }
574 gpio_direction_input(GPIO95_MMC_WP);
575 } else {
576 err = gpio_request(GPIO38_SD_PWEN, "sdio power");
577 if (err) {
578 dev_err(dev, "can't request MMC power control : %d\n",
579 err);
580 goto err_gpio_wp;
581 }
582 gpio_direction_output(GPIO38_SD_PWEN, 1);
583 }
584
585 return 0;
586
587 err_gpio_wp:
588 free_irq(gpio_to_irq(mmc_cd), data);
589 err_irq:
590 regulator_put(em_x270_sdio_ldo);
591
592 return err;
593 }
594
595 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
596 {
597 struct pxamci_platform_data* p_d = dev->platform_data;
598
599 if ((1 << vdd) & p_d->ocr_mask) {
600 int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
601
602 regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
603 regulator_enable(em_x270_sdio_ldo);
604 } else {
605 regulator_disable(em_x270_sdio_ldo);
606 }
607 }
608
609 static void em_x270_mci_exit(struct device *dev, void *data)
610 {
611 free_irq(gpio_to_irq(mmc_cd), data);
612 regulator_put(em_x270_sdio_ldo);
613
614 if (machine_is_em_x270())
615 gpio_free(GPIO95_MMC_WP);
616 else
617 gpio_free(GPIO38_SD_PWEN);
618 }
619
620 static int em_x270_mci_get_ro(struct device *dev)
621 {
622 return gpio_get_value(GPIO95_MMC_WP);
623 }
624
625 static struct pxamci_platform_data em_x270_mci_platform_data = {
626 .detect_delay_ms = 250,
627 .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
628 MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
629 MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
630 MMC_VDD_30_31|MMC_VDD_31_32,
631 .init = em_x270_mci_init,
632 .setpower = em_x270_mci_setpower,
633 .exit = em_x270_mci_exit,
634 .gpio_card_detect = -1,
635 .gpio_card_ro = -1,
636 .gpio_power = -1,
637 };
638
639 static void __init em_x270_init_mmc(void)
640 {
641 if (machine_is_em_x270())
642 em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
643
644 pxa_set_mci_info(&em_x270_mci_platform_data);
645 }
646 #else
647 static inline void em_x270_init_mmc(void) {}
648 #endif
649
650 /* LCD */
651 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
652 static struct pxafb_mode_info em_x270_lcd_modes[] = {
653 [0] = {
654 .pixclock = 38250,
655 .bpp = 16,
656 .xres = 480,
657 .yres = 640,
658 .hsync_len = 8,
659 .vsync_len = 2,
660 .left_margin = 8,
661 .upper_margin = 2,
662 .right_margin = 24,
663 .lower_margin = 4,
664 .sync = 0,
665 },
666 [1] = {
667 .pixclock = 153800,
668 .bpp = 16,
669 .xres = 240,
670 .yres = 320,
671 .hsync_len = 8,
672 .vsync_len = 2,
673 .left_margin = 8,
674 .upper_margin = 2,
675 .right_margin = 88,
676 .lower_margin = 2,
677 .sync = 0,
678 },
679 };
680
681 static struct pxafb_mach_info em_x270_lcd = {
682 .modes = em_x270_lcd_modes,
683 .num_modes = 2,
684 .lcd_conn = LCD_COLOR_TFT_16BPP,
685 };
686
687 static void __init em_x270_init_lcd(void)
688 {
689 pxa_set_fb_info(NULL, &em_x270_lcd);
690 }
691 #else
692 static inline void em_x270_init_lcd(void) {}
693 #endif
694
695 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
696 static struct pxa2xx_spi_master em_x270_spi_info = {
697 .num_chipselect = 1,
698 };
699
700 static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
701 .rx_threshold = 1,
702 .tx_threshold = 1,
703 .gpio_cs = -1,
704 };
705
706 static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
707 .model = TDO35S,
708 };
709
710 static struct pxa2xx_spi_master em_x270_spi_2_info = {
711 .num_chipselect = 1,
712 .enable_dma = 1,
713 };
714
715 static struct pxa2xx_spi_chip em_x270_libertas_chip = {
716 .rx_threshold = 1,
717 .tx_threshold = 1,
718 .timeout = 1000,
719 .gpio_cs = 14,
720 };
721
722 static unsigned long em_x270_libertas_pin_config[] = {
723 /* SSP2 */
724 GPIO19_SSP2_SCLK,
725 GPIO14_GPIO,
726 GPIO89_SSP2_TXD,
727 GPIO88_SSP2_RXD,
728 };
729
730 static int em_x270_libertas_setup(struct spi_device *spi)
731 {
732 int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
733 if (err)
734 return err;
735
736 err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
737 if (err)
738 goto err_free_pwen;
739
740 if (machine_is_exeda()) {
741 err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
742 if (err)
743 goto err_free_strap;
744
745 gpio_direction_output(GPIO37_WLAN_RST, 1);
746 msleep(100);
747 }
748
749 gpio_direction_output(GPIO19_WLAN_STRAP, 1);
750 msleep(100);
751
752 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
753
754 gpio_direction_output(GPIO115_WLAN_PWEN, 0);
755 msleep(100);
756 gpio_set_value(GPIO115_WLAN_PWEN, 1);
757 msleep(100);
758
759 spi->bits_per_word = 16;
760 spi_setup(spi);
761
762 return 0;
763
764 err_free_strap:
765 gpio_free(GPIO19_WLAN_STRAP);
766 err_free_pwen:
767 gpio_free(GPIO115_WLAN_PWEN);
768
769 return err;
770 }
771
772 static int em_x270_libertas_teardown(struct spi_device *spi)
773 {
774 gpio_set_value(GPIO115_WLAN_PWEN, 0);
775 gpio_free(GPIO115_WLAN_PWEN);
776 gpio_free(GPIO19_WLAN_STRAP);
777
778 if (machine_is_exeda()) {
779 gpio_set_value(GPIO37_WLAN_RST, 0);
780 gpio_free(GPIO37_WLAN_RST);
781 }
782
783 return 0;
784 }
785
786 struct libertas_spi_platform_data em_x270_libertas_pdata = {
787 .use_dummy_writes = 1,
788 .setup = em_x270_libertas_setup,
789 .teardown = em_x270_libertas_teardown,
790 };
791
792 static struct spi_board_info em_x270_spi_devices[] __initdata = {
793 {
794 .modalias = "tdo24m",
795 .max_speed_hz = 1000000,
796 .bus_num = 1,
797 .chip_select = 0,
798 .controller_data = &em_x270_tdo24m_chip,
799 .platform_data = &em_x270_tdo24m_pdata,
800 },
801 {
802 .modalias = "libertas_spi",
803 .max_speed_hz = 13000000,
804 .bus_num = 2,
805 .irq = PXA_GPIO_TO_IRQ(116),
806 .chip_select = 0,
807 .controller_data = &em_x270_libertas_chip,
808 .platform_data = &em_x270_libertas_pdata,
809 },
810 };
811
812 static void __init em_x270_init_spi(void)
813 {
814 pxa2xx_set_spi_info(1, &em_x270_spi_info);
815 pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
816 spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
817 }
818 #else
819 static inline void em_x270_init_spi(void) {}
820 #endif
821
822 #if defined(CONFIG_SND_PXA2XX_LIB_AC97)
823 static pxa2xx_audio_ops_t em_x270_ac97_info = {
824 .reset_gpio = 113,
825 };
826
827 static void __init em_x270_init_ac97(void)
828 {
829 pxa_set_ac97_info(&em_x270_ac97_info);
830 }
831 #else
832 static inline void em_x270_init_ac97(void) {}
833 #endif
834
835 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
836 static unsigned int em_x270_module_matrix_keys[] = {
837 KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
838 KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
839 KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
840 };
841
842 struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
843 /* code map for the matrix keys */
844 .matrix_key_rows = 3,
845 .matrix_key_cols = 3,
846 .matrix_key_map = em_x270_module_matrix_keys,
847 .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys),
848 };
849
850 static unsigned int em_x270_exeda_matrix_keys[] = {
851 KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
852 KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
853 KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
854 KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
855
856 KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
857 KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
858 KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
859 KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
860
861 KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
862 KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
863 KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
864 KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
865
866 KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
867 KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
868 KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
869 KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
870
871 KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
872 KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
873 KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
874 KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
875
876 KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
877 KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
878 KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
879 KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
880
881 KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
882 KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
883 KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
884 KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
885
886 KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
887 KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
888 KEY(7, 4, 0), KEY(7, 5, 0),
889 KEY(7, 6, 0), KEY(7, 7, 0),
890 };
891
892 struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
893 /* code map for the matrix keys */
894 .matrix_key_rows = 8,
895 .matrix_key_cols = 8,
896 .matrix_key_map = em_x270_exeda_matrix_keys,
897 .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
898 };
899
900 static void __init em_x270_init_keypad(void)
901 {
902 if (machine_is_em_x270())
903 pxa_set_keypad_info(&em_x270_module_keypad_info);
904 else
905 pxa_set_keypad_info(&em_x270_exeda_keypad_info);
906 }
907 #else
908 static inline void em_x270_init_keypad(void) {}
909 #endif
910
911 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
912 static struct gpio_keys_button gpio_keys_button[] = {
913 [0] = {
914 .desc = "sleep/wakeup",
915 .code = KEY_SUSPEND,
916 .type = EV_PWR,
917 .gpio = 1,
918 .wakeup = 1,
919 },
920 };
921
922 static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
923 .buttons = gpio_keys_button,
924 .nbuttons = 1,
925 };
926
927 static struct platform_device em_x270_gpio_keys = {
928 .name = "gpio-keys",
929 .id = -1,
930 .dev = {
931 .platform_data = &em_x270_gpio_keys_data,
932 },
933 };
934
935 static void __init em_x270_init_gpio_keys(void)
936 {
937 platform_device_register(&em_x270_gpio_keys);
938 }
939 #else
940 static inline void em_x270_init_gpio_keys(void) {}
941 #endif
942
943 /* Quick Capture Interface and sensor setup */
944 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
945 static struct regulator *em_x270_camera_ldo;
946
947 static int em_x270_sensor_init(void)
948 {
949 int ret;
950
951 ret = gpio_request(cam_reset, "camera reset");
952 if (ret)
953 return ret;
954
955 gpio_direction_output(cam_reset, 0);
956
957 em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
958 if (em_x270_camera_ldo == NULL) {
959 gpio_free(cam_reset);
960 return -ENODEV;
961 }
962
963 ret = regulator_enable(em_x270_camera_ldo);
964 if (ret) {
965 regulator_put(em_x270_camera_ldo);
966 gpio_free(cam_reset);
967 return ret;
968 }
969
970 gpio_set_value(cam_reset, 1);
971
972 return 0;
973 }
974
975 struct pxacamera_platform_data em_x270_camera_platform_data = {
976 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
977 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
978 .mclk_10khz = 2600,
979 };
980
981 static int em_x270_sensor_power(struct device *dev, int on)
982 {
983 int ret;
984 int is_on = regulator_is_enabled(em_x270_camera_ldo);
985
986 if (on == is_on)
987 return 0;
988
989 gpio_set_value(cam_reset, !on);
990
991 if (on)
992 ret = regulator_enable(em_x270_camera_ldo);
993 else
994 ret = regulator_disable(em_x270_camera_ldo);
995
996 if (ret)
997 return ret;
998
999 gpio_set_value(cam_reset, on);
1000
1001 return 0;
1002 }
1003
1004 static struct i2c_board_info em_x270_i2c_cam_info[] = {
1005 {
1006 I2C_BOARD_INFO("mt9m111", 0x48),
1007 },
1008 };
1009
1010 static struct soc_camera_link iclink = {
1011 .bus_id = 0,
1012 .power = em_x270_sensor_power,
1013 .board_info = &em_x270_i2c_cam_info[0],
1014 .i2c_adapter_id = 0,
1015 };
1016
1017 static struct platform_device em_x270_camera = {
1018 .name = "soc-camera-pdrv",
1019 .id = -1,
1020 .dev = {
1021 .platform_data = &iclink,
1022 },
1023 };
1024
1025 static void __init em_x270_init_camera(void)
1026 {
1027 if (em_x270_sensor_init() == 0) {
1028 pxa_set_camera_info(&em_x270_camera_platform_data);
1029 platform_device_register(&em_x270_camera);
1030 }
1031 }
1032 #else
1033 static inline void em_x270_init_camera(void) {}
1034 #endif
1035
1036 static struct regulator_bulk_data em_x270_gps_consumer_supply = {
1037 .supply = "vcc gps",
1038 };
1039
1040 static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
1041 .name = "vcc gps",
1042 .num_supplies = 1,
1043 .supplies = &em_x270_gps_consumer_supply,
1044 };
1045
1046 static struct platform_device em_x270_gps_userspace_consumer = {
1047 .name = "reg-userspace-consumer",
1048 .id = 0,
1049 .dev = {
1050 .platform_data = &em_x270_gps_consumer_data,
1051 },
1052 };
1053
1054 static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
1055 .supply = "vcc gprs",
1056 };
1057
1058 static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
1059 .name = "vcc gprs",
1060 .num_supplies = 1,
1061 .supplies = &em_x270_gprs_consumer_supply
1062 };
1063
1064 static struct platform_device em_x270_gprs_userspace_consumer = {
1065 .name = "reg-userspace-consumer",
1066 .id = 1,
1067 .dev = {
1068 .platform_data = &em_x270_gprs_consumer_data,
1069 }
1070 };
1071
1072 static struct platform_device *em_x270_userspace_consumers[] = {
1073 &em_x270_gps_userspace_consumer,
1074 &em_x270_gprs_userspace_consumer,
1075 };
1076
1077 static void __init em_x270_userspace_consumers_init(void)
1078 {
1079 platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
1080 }
1081
1082 /* DA9030 related initializations */
1083 #define REGULATOR_CONSUMER(_name, _dev_name, _supply) \
1084 static struct regulator_consumer_supply _name##_consumers[] = { \
1085 REGULATOR_SUPPLY(_supply, _dev_name), \
1086 }
1087
1088 REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
1089 REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
1090 REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
1091 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
1092 REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
1093 REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
1094
1095 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
1096 static struct regulator_init_data _ldo##_data = { \
1097 .constraints = { \
1098 .min_uV = _min_uV, \
1099 .max_uV = _max_uV, \
1100 .state_mem = { \
1101 .enabled = 0, \
1102 }, \
1103 .valid_ops_mask = _ops_mask, \
1104 .apply_uV = 1, \
1105 }, \
1106 .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
1107 .consumer_supplies = _ldo##_consumers, \
1108 };
1109
1110 REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1111 REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1112 REGULATOR_INIT(ldo10, 2000000, 3200000,
1113 REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
1114 REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1115 REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1116 REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
1117
1118 struct led_info em_x270_led_info = {
1119 .name = "em-x270:orange",
1120 .default_trigger = "battery-charging-or-full",
1121 };
1122
1123 struct power_supply_info em_x270_psy_info = {
1124 .name = "battery",
1125 .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
1126 .voltage_max_design = 4200000,
1127 .voltage_min_design = 3000000,
1128 .use_for_apm = 1,
1129 };
1130
1131 static void em_x270_battery_low(void)
1132 {
1133 #if defined(CONFIG_APM_EMULATION)
1134 apm_queue_event(APM_LOW_BATTERY);
1135 #endif
1136 }
1137
1138 static void em_x270_battery_critical(void)
1139 {
1140 #if defined(CONFIG_APM_EMULATION)
1141 apm_queue_event(APM_CRITICAL_SUSPEND);
1142 #endif
1143 }
1144
1145 struct da9030_battery_info em_x270_batterty_info = {
1146 .battery_info = &em_x270_psy_info,
1147
1148 .charge_milliamp = 1000,
1149 .charge_millivolt = 4200,
1150
1151 .vbat_low = 3600,
1152 .vbat_crit = 3400,
1153 .vbat_charge_start = 4100,
1154 .vbat_charge_stop = 4200,
1155 .vbat_charge_restart = 4000,
1156
1157 .vcharge_min = 3200,
1158 .vcharge_max = 5500,
1159
1160 .tbat_low = 197,
1161 .tbat_high = 78,
1162 .tbat_restart = 100,
1163
1164 .batmon_interval = 0,
1165
1166 .battery_low = em_x270_battery_low,
1167 .battery_critical = em_x270_battery_critical,
1168 };
1169
1170 #define DA9030_SUBDEV(_name, _id, _pdata) \
1171 { \
1172 .name = "da903x-" #_name, \
1173 .id = DA9030_ID_##_id, \
1174 .platform_data = _pdata, \
1175 }
1176
1177 #define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
1178
1179 struct da903x_subdev_info em_x270_da9030_subdevs[] = {
1180 DA9030_LDO(3),
1181 DA9030_LDO(5),
1182 DA9030_LDO(10),
1183 DA9030_LDO(12),
1184 DA9030_LDO(19),
1185
1186 DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
1187
1188 DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
1189 DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
1190 DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
1191 };
1192
1193 static struct da903x_platform_data em_x270_da9030_info = {
1194 .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
1195 .subdevs = em_x270_da9030_subdevs,
1196 };
1197
1198 static struct i2c_board_info em_x270_i2c_pmic_info = {
1199 I2C_BOARD_INFO("da9030", 0x49),
1200 .irq = PXA_GPIO_TO_IRQ(0),
1201 .platform_data = &em_x270_da9030_info,
1202 };
1203
1204 static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
1205 .use_pio = 1,
1206 };
1207
1208 static void __init em_x270_init_da9030(void)
1209 {
1210 pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
1211 i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
1212 }
1213
1214 static struct pca953x_platform_data exeda_gpio_ext_pdata = {
1215 .gpio_base = 128,
1216 };
1217
1218 static struct i2c_board_info exeda_i2c_info[] = {
1219 {
1220 I2C_BOARD_INFO("pca9555", 0x21),
1221 .platform_data = &exeda_gpio_ext_pdata,
1222 },
1223 };
1224
1225 static struct i2c_pxa_platform_data em_x270_i2c_info = {
1226 .fast_mode = 1,
1227 };
1228
1229 static void __init em_x270_init_i2c(void)
1230 {
1231 pxa_set_i2c_info(&em_x270_i2c_info);
1232
1233 if (machine_is_exeda())
1234 i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
1235 }
1236
1237 static void __init em_x270_module_init(void)
1238 {
1239 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
1240
1241 mmc_cd = GPIO13_MMC_CD;
1242 nand_rb = GPIO56_NAND_RB;
1243 dm9000_flags = DM9000_PLATF_32BITONLY;
1244 cam_reset = GPIO93_CAM_RESET;
1245 usb_hub_reset = GPIO16_USB_HUB_RESET;
1246 }
1247
1248 static void __init em_x270_exeda_init(void)
1249 {
1250 pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
1251
1252 mmc_cd = GPIO114_MMC_CD;
1253 nand_rb = GPIO20_NAND_RB;
1254 dm9000_flags = DM9000_PLATF_16BITONLY;
1255 cam_reset = GPIO130_CAM_RESET;
1256 usb_hub_reset = GPIO10_USB_HUB_RESET;
1257 }
1258
1259 static void __init em_x270_init(void)
1260 {
1261 pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
1262
1263 pxa_set_ffuart_info(NULL);
1264 pxa_set_btuart_info(NULL);
1265 pxa_set_stuart_info(NULL);
1266
1267 #ifdef CONFIG_PM
1268 pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
1269 #endif
1270
1271 if (machine_is_em_x270())
1272 em_x270_module_init();
1273 else if (machine_is_exeda())
1274 em_x270_exeda_init();
1275 else
1276 panic("Unsupported machine: %d\n", machine_arch_type);
1277
1278 em_x270_init_da9030();
1279 em_x270_init_dm9000();
1280 em_x270_init_rtc();
1281 em_x270_init_nand();
1282 em_x270_init_nor();
1283 em_x270_init_lcd();
1284 em_x270_init_mmc();
1285 em_x270_init_ohci();
1286 em_x270_init_keypad();
1287 em_x270_init_gpio_keys();
1288 em_x270_init_ac97();
1289 em_x270_init_spi();
1290 em_x270_init_i2c();
1291 em_x270_init_camera();
1292 em_x270_userspace_consumers_init();
1293 }
1294
1295 MACHINE_START(EM_X270, "Compulab EM-X270")
1296 .atag_offset = 0x100,
1297 .map_io = pxa27x_map_io,
1298 .nr_irqs = PXA_NR_IRQS,
1299 .init_irq = pxa27x_init_irq,
1300 .handle_irq = pxa27x_handle_irq,
1301 .timer = &pxa_timer,
1302 .init_machine = em_x270_init,
1303 .restart = pxa_restart,
1304 MACHINE_END
1305
1306 MACHINE_START(EXEDA, "Compulab eXeda")
1307 .atag_offset = 0x100,
1308 .map_io = pxa27x_map_io,
1309 .nr_irqs = PXA_NR_IRQS,
1310 .init_irq = pxa27x_init_irq,
1311 .handle_irq = pxa27x_handle_irq,
1312 .timer = &pxa_timer,
1313 .init_machine = em_x270_init,
1314 .restart = pxa_restart,
1315 MACHINE_END
Linux with added FPC-III support