arch/arm/mach-pxa/palm27x.c

   1 /*
   2  * Common code for Palm LD, T5, TX, Z72
   3  *
   4  * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  */
  11
  12 #include <linux/platform_device.h>
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/gpio_keys.h>
  16 #include <linux/input.h>
  17 #include <linux/pda_power.h>
  18 #include <linux/pwm_backlight.h>
  19 #include <linux/gpio.h>
  20 #include <linux/wm97xx.h>
  21 #include <linux/power_supply.h>
  22 #include <linux/usb/gpio_vbus.h>
  23 #include <linux/regulator/max1586.h>
  24 #include <linux/i2c/pxa-i2c.h>
  25
  26 #include <asm/mach-types.h>
  27 #include <asm/mach/arch.h>
  28 #include <asm/mach/map.h>
  29
  30 #include <mach/pxa27x.h>
  31 #include <mach/audio.h>
  32 #include <linux/platform_data/mmc-pxamci.h>
  33 #include <linux/platform_data/video-pxafb.h>
  34 #include <linux/platform_data/irda-pxaficp.h>
  35 #include <mach/udc.h>
  36 #include <linux/platform_data/asoc-palm27x.h>
  37 #include <mach/palm27x.h>
  38
  39 #include "generic.h"
  40 #include "devices.h"
  41
  42 /******************************************************************************
  43  * SD/MMC card controller
  44  ******************************************************************************/
  45 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
  46 static struct pxamci_platform_data palm27x_mci_platform_data = {
  47         .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
  48         .detect_delay_ms        = 200,
  49 };
  50
  51 void __init palm27x_mmc_init(int detect, int ro, int power,
  52                                         int power_inverted)
  53 {
  54         palm27x_mci_platform_data.gpio_card_detect      = detect;
  55         palm27x_mci_platform_data.gpio_card_ro          = ro;
  56         palm27x_mci_platform_data.gpio_power            = power;
  57         palm27x_mci_platform_data.gpio_power_invert     = power_inverted;
  58
  59         pxa_set_mci_info(&palm27x_mci_platform_data);
  60 }
  61 #endif
  62
  63 /******************************************************************************
  64  * Power management - standby
  65  ******************************************************************************/
  66 #if defined(CONFIG_SUSPEND)
  67 void __init palm27x_pm_init(unsigned long str_base)
  68 {
  69         static const unsigned long resume[] = {
  70                 0xe3a00101,     /* mov  r0,     #0x40000000 */
  71                 0xe380060f,     /* orr  r0, r0, #0x00f00000 */
  72                 0xe590f008,     /* ldr  pc, [r0, #0x08] */
  73         };
  74
  75         /*
  76          * Copy the bootloader.
  77          * NOTE: PalmZ72 uses a different wakeup method!
  78          */
  79         memcpy(phys_to_virt(str_base), resume, sizeof(resume));
  80 }
  81 #endif
  82
  83 /******************************************************************************
  84  * Framebuffer
  85  ******************************************************************************/
  86 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
  87 struct pxafb_mode_info palm_320x480_lcd_mode = {
  88         .pixclock       = 57692,
  89         .xres           = 320,
  90         .yres           = 480,
  91         .bpp            = 16,
  92
  93         .left_margin    = 32,
  94         .right_margin   = 1,
  95         .upper_margin   = 7,
  96         .lower_margin   = 1,
  97
  98         .hsync_len      = 4,
  99         .vsync_len      = 1,
 100 };
 101
 102 struct pxafb_mode_info palm_320x320_lcd_mode = {
 103         .pixclock       = 115384,
 104         .xres           = 320,
 105         .yres           = 320,
 106         .bpp            = 16,
 107
 108         .left_margin    = 27,
 109         .right_margin   = 7,
 110         .upper_margin   = 7,
 111         .lower_margin   = 8,
 112
 113         .hsync_len      = 6,
 114         .vsync_len      = 1,
 115 };
 116
 117 struct pxafb_mode_info palm_320x320_new_lcd_mode = {
 118         .pixclock       = 86538,
 119         .xres           = 320,
 120         .yres           = 320,
 121         .bpp            = 16,
 122
 123         .left_margin    = 20,
 124         .right_margin   = 8,
 125         .upper_margin   = 8,
 126         .lower_margin   = 5,
 127
 128         .hsync_len      = 4,
 129         .vsync_len      = 1,
 130 };
 131
 132 static struct pxafb_mach_info palm27x_lcd_screen = {
 133         .num_modes      = 1,
 134         .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 135 };
 136
 137 static int palm27x_lcd_power;
 138 static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
 139 {
 140         gpio_set_value(palm27x_lcd_power, on);
 141 }
 142
 143 void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 144 {
 145         palm27x_lcd_screen.modes = mode;
 146
 147         if (gpio_is_valid(power)) {
 148                 if (!gpio_request(power, "LCD power")) {
 149                         pr_err("Palm27x: failed to claim lcd power gpio!\n");
 150                         return;
 151                 }
 152                 if (!gpio_direction_output(power, 1)) {
 153                         pr_err("Palm27x: lcd power configuration failed!\n");
 154                         return;
 155                 }
 156                 palm27x_lcd_power = power;
 157                 palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
 158         }
 159
 160         pxa_set_fb_info(NULL, &palm27x_lcd_screen);
 161 }
 162 #endif
 163
 164 /******************************************************************************
 165  * USB Gadget
 166  ******************************************************************************/
 167 #if     defined(CONFIG_USB_PXA27X) || \
 168         defined(CONFIG_USB_PXA27X_MODULE)
 169 static struct gpio_vbus_mach_info palm27x_udc_info = {
 170         .gpio_vbus_inverted     = 1,
 171 };
 172
 173 static struct platform_device palm27x_gpio_vbus = {
 174         .name   = "gpio-vbus",
 175         .id     = -1,
 176         .dev    = {
 177                 .platform_data  = &palm27x_udc_info,
 178         },
 179 };
 180
 181 void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
 182 {
 183         palm27x_udc_info.gpio_vbus      = vbus;
 184         palm27x_udc_info.gpio_pullup    = pullup;
 185
 186         palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
 187
 188         if (!gpio_request(pullup, "USB Pullup")) {
 189                 gpio_direction_output(pullup,
 190                         palm27x_udc_info.gpio_vbus_inverted);
 191                 gpio_free(pullup);
 192         } else
 193                 return;
 194
 195         platform_device_register(&palm27x_gpio_vbus);
 196 }
 197 #endif
 198
 199 /******************************************************************************
 200  * IrDA
 201  ******************************************************************************/
 202 #if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
 203 static struct pxaficp_platform_data palm27x_ficp_platform_data = {
 204         .transceiver_cap        = IR_SIRMODE | IR_OFF,
 205 };
 206
 207 void __init palm27x_irda_init(int pwdn)
 208 {
 209         palm27x_ficp_platform_data.gpio_pwdown = pwdn;
 210         pxa_set_ficp_info(&palm27x_ficp_platform_data);
 211 }
 212 #endif
 213
 214 /******************************************************************************
 215  * WM97xx audio, battery
 216  ******************************************************************************/
 217 #if     defined(CONFIG_TOUCHSCREEN_WM97XX) || \
 218         defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
 219 static struct wm97xx_batt_pdata palm27x_batt_pdata = {
 220         .batt_aux       = WM97XX_AUX_ID3,
 221         .temp_aux       = WM97XX_AUX_ID2,
 222         .charge_gpio    = -1,
 223         .batt_mult      = 1000,
 224         .batt_div       = 414,
 225         .temp_mult      = 1,
 226         .temp_div       = 1,
 227         .batt_tech      = POWER_SUPPLY_TECHNOLOGY_LIPO,
 228         .batt_name      = "main-batt",
 229 };
 230
 231 static struct wm97xx_pdata palm27x_wm97xx_pdata = {
 232         .batt_pdata     = &palm27x_batt_pdata,
 233 };
 234
 235 static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
 236         .codec_pdata    = { &palm27x_wm97xx_pdata, },
 237 };
 238
 239 static struct palm27x_asoc_info palm27x_asoc_pdata = {
 240         .jack_gpio      = -1,
 241 };
 242
 243 static struct platform_device palm27x_asoc = {
 244         .name = "palm27x-asoc",
 245         .id   = -1,
 246         .dev  = {
 247                 .platform_data = &palm27x_asoc_pdata,
 248         },
 249 };
 250
 251 void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
 252 {
 253         palm27x_ac97_pdata.reset_gpio   = reset;
 254         palm27x_asoc_pdata.jack_gpio    = jack;
 255
 256         if (minv < 0 || maxv < 0) {
 257                 palm27x_ac97_pdata.codec_pdata[0] = NULL;
 258                 pxa_set_ac97_info(&palm27x_ac97_pdata);
 259         } else {
 260                 palm27x_batt_pdata.min_voltage  = minv,
 261                 palm27x_batt_pdata.max_voltage  = maxv,
 262
 263                 pxa_set_ac97_info(&palm27x_ac97_pdata);
 264                 platform_device_register(&palm27x_asoc);
 265         }
 266 }
 267 #endif
 268
 269 /******************************************************************************
 270  * Backlight
 271  ******************************************************************************/
 272 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 273 static int palm_bl_power;
 274 static int palm_lcd_power;
 275
 276 static int palm27x_backlight_init(struct device *dev)
 277 {
 278         int ret;
 279
 280         ret = gpio_request(palm_bl_power, "BL POWER");
 281         if (ret)
 282                 goto err;
 283         ret = gpio_direction_output(palm_bl_power, 0);
 284         if (ret)
 285                 goto err2;
 286
 287         if (gpio_is_valid(palm_lcd_power)) {
 288                 ret = gpio_request(palm_lcd_power, "LCD POWER");
 289                 if (ret)
 290                         goto err2;
 291                 ret = gpio_direction_output(palm_lcd_power, 0);
 292                 if (ret)
 293                         goto err3;
 294         }
 295
 296         return 0;
 297 err3:
 298         gpio_free(palm_lcd_power);
 299 err2:
 300         gpio_free(palm_bl_power);
 301 err:
 302         return ret;
 303 }
 304
 305 static int palm27x_backlight_notify(struct device *dev, int brightness)
 306 {
 307         gpio_set_value(palm_bl_power, brightness);
 308         if (gpio_is_valid(palm_lcd_power))
 309                 gpio_set_value(palm_lcd_power, brightness);
 310         return brightness;
 311 }
 312
 313 static void palm27x_backlight_exit(struct device *dev)
 314 {
 315         gpio_free(palm_bl_power);
 316         if (gpio_is_valid(palm_lcd_power))
 317                 gpio_free(palm_lcd_power);
 318 }
 319
 320 static struct platform_pwm_backlight_data palm27x_backlight_data = {
 321         .pwm_id         = 0,
 322         .max_brightness = 0xfe,
 323         .dft_brightness = 0x7e,
 324         .pwm_period_ns  = 3500 * 1024,
 325         .init           = palm27x_backlight_init,
 326         .notify         = palm27x_backlight_notify,
 327         .exit           = palm27x_backlight_exit,
 328 };
 329
 330 static struct platform_device palm27x_backlight = {
 331         .name   = "pwm-backlight",
 332         .dev    = {
 333                 .parent         = &pxa27x_device_pwm0.dev,
 334                 .platform_data  = &palm27x_backlight_data,
 335         },
 336 };
 337
 338 void __init palm27x_pwm_init(int bl, int lcd)
 339 {
 340         palm_bl_power   = bl;
 341         palm_lcd_power  = lcd;
 342         platform_device_register(&palm27x_backlight);
 343 }
 344 #endif
 345
 346 /******************************************************************************
 347  * Power supply
 348  ******************************************************************************/
 349 #if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
 350 static int palm_ac_state;
 351 static int palm_usb_state;
 352
 353 static int palm27x_power_supply_init(struct device *dev)
 354 {
 355         int ret;
 356
 357         ret = gpio_request(palm_ac_state, "AC state");
 358         if (ret)
 359                 goto err1;
 360         ret = gpio_direction_input(palm_ac_state);
 361         if (ret)
 362                 goto err2;
 363
 364         if (gpio_is_valid(palm_usb_state)) {
 365                 ret = gpio_request(palm_usb_state, "USB state");
 366                 if (ret)
 367                         goto err2;
 368                 ret = gpio_direction_input(palm_usb_state);
 369                 if (ret)
 370                         goto err3;
 371         }
 372
 373         return 0;
 374 err3:
 375         gpio_free(palm_usb_state);
 376 err2:
 377         gpio_free(palm_ac_state);
 378 err1:
 379         return ret;
 380 }
 381
 382 static void palm27x_power_supply_exit(struct device *dev)
 383 {
 384         gpio_free(palm_usb_state);
 385         gpio_free(palm_ac_state);
 386 }
 387
 388 static int palm27x_is_ac_online(void)
 389 {
 390         return gpio_get_value(palm_ac_state);
 391 }
 392
 393 static int palm27x_is_usb_online(void)
 394 {
 395         return !gpio_get_value(palm_usb_state);
 396 }
 397 static char *palm27x_supplicants[] = {
 398         "main-battery",
 399 };
 400
 401 static struct pda_power_pdata palm27x_ps_info = {
 402         .init                   = palm27x_power_supply_init,
 403         .exit                   = palm27x_power_supply_exit,
 404         .is_ac_online           = palm27x_is_ac_online,
 405         .is_usb_online          = palm27x_is_usb_online,
 406         .supplied_to            = palm27x_supplicants,
 407         .num_supplicants        = ARRAY_SIZE(palm27x_supplicants),
 408 };
 409
 410 static struct platform_device palm27x_power_supply = {
 411         .name = "pda-power",
 412         .id   = -1,
 413         .dev  = {
 414                 .platform_data = &palm27x_ps_info,
 415         },
 416 };
 417
 418 void __init palm27x_power_init(int ac, int usb)
 419 {
 420         palm_ac_state   = ac;
 421         palm_usb_state  = usb;
 422         platform_device_register(&palm27x_power_supply);
 423 }
 424 #endif
 425
 426 /******************************************************************************
 427  * Core power regulator
 428  ******************************************************************************/
 429 #if defined(CONFIG_REGULATOR_MAX1586) || \
 430     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 431 static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
 432         REGULATOR_SUPPLY("vcc_core", NULL),
 433 };
 434
 435 static struct regulator_init_data palm27x_max1587a_v3_info = {
 436         .constraints = {
 437                 .name           = "vcc_core range",
 438                 .min_uV         = 900000,
 439                 .max_uV         = 1705000,
 440                 .always_on      = 1,
 441                 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 442         },
 443         .consumer_supplies      = palm27x_max1587a_consumers,
 444         .num_consumer_supplies  = ARRAY_SIZE(palm27x_max1587a_consumers),
 445 };
 446
 447 static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
 448         {
 449                 .name           = "vcc_core",
 450                 .id             = MAX1586_V3,
 451                 .platform_data  = &palm27x_max1587a_v3_info,
 452         }
 453 };
 454
 455 static struct max1586_platform_data palm27x_max1587a_info = {
 456         .subdevs     = palm27x_max1587a_subdevs,
 457         .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
 458         .v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
 459 };
 460
 461 static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
 462         {
 463                 I2C_BOARD_INFO("max1586", 0x14),
 464                 .platform_data  = &palm27x_max1587a_info,
 465         },
 466 };
 467
 468 static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
 469         .use_pio        = 1,
 470 };
 471
 472 void __init palm27x_pmic_init(void)
 473 {
 474         i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
 475         pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
 476 }
 477 #endif