2 * arch/arm/mach-shmobile/board-ag5evm.c
4 * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com>
5 * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/irq.h>
26 #include <linux/platform_device.h>
27 #include <linux/delay.h>
29 #include <linux/dma-mapping.h>
30 #include <linux/regulator/fixed.h>
31 #include <linux/regulator/machine.h>
32 #include <linux/serial_sci.h>
33 #include <linux/smsc911x.h>
34 #include <linux/gpio.h>
35 #include <linux/videodev2.h>
36 #include <linux/input.h>
37 #include <linux/input/sh_keysc.h>
38 #include <linux/mmc/host.h>
39 #include <linux/mmc/sh_mmcif.h>
40 #include <linux/mmc/sh_mobile_sdhi.h>
41 #include <linux/mfd/tmio.h>
42 #include <linux/sh_clk.h>
43 #include <video/sh_mobile_lcdc.h>
44 #include <video/sh_mipi_dsi.h>
45 #include <sound/sh_fsi.h>
46 #include <mach/hardware.h>
47 #include <mach/irqs.h>
48 #include <mach/sh73a0.h>
49 #include <mach/common.h>
50 #include <asm/mach-types.h>
51 #include <asm/mach/arch.h>
52 #include <asm/hardware/gic.h>
53 #include <asm/hardware/cache-l2x0.h>
54 #include <asm/traps.h>
56 /* Dummy supplies, where voltage doesn't matter */
57 static struct regulator_consumer_supply dummy_supplies
[] = {
58 REGULATOR_SUPPLY("vddvario", "smsc911x"),
59 REGULATOR_SUPPLY("vdd33a", "smsc911x"),
62 static struct resource smsc9220_resources
[] = {
65 .end
= 0x14000000 + SZ_64K
- 1,
66 .flags
= IORESOURCE_MEM
,
69 .start
= SH73A0_PINT0_IRQ(2), /* PINTA2 */
70 .flags
= IORESOURCE_IRQ
,
74 static struct smsc911x_platform_config smsc9220_platdata
= {
75 .flags
= SMSC911X_USE_32BIT
| SMSC911X_SAVE_MAC_ADDRESS
,
76 .phy_interface
= PHY_INTERFACE_MODE_MII
,
77 .irq_polarity
= SMSC911X_IRQ_POLARITY_ACTIVE_LOW
,
78 .irq_type
= SMSC911X_IRQ_TYPE_PUSH_PULL
,
81 static struct platform_device eth_device
= {
85 .platform_data
= &smsc9220_platdata
,
87 .resource
= smsc9220_resources
,
88 .num_resources
= ARRAY_SIZE(smsc9220_resources
),
91 static struct sh_keysc_info keysc_platdata
= {
92 .mode
= SH_KEYSC_MODE_6
,
96 KEY_A
, KEY_B
, KEY_C
, KEY_D
, KEY_E
, KEY_F
, KEY_G
,
97 KEY_H
, KEY_I
, KEY_J
, KEY_K
, KEY_L
, KEY_M
, KEY_N
,
98 KEY_O
, KEY_P
, KEY_Q
, KEY_R
, KEY_S
, KEY_T
, KEY_U
,
99 KEY_V
, KEY_W
, KEY_X
, KEY_Y
, KEY_Z
, KEY_HOME
, KEY_SLEEP
,
100 KEY_SPACE
, KEY_9
, KEY_6
, KEY_3
, KEY_WAKEUP
, KEY_RIGHT
, \
102 KEY_0
, KEY_8
, KEY_5
, KEY_2
, KEY_DOWN
, KEY_ENTER
, KEY_UP
,
103 KEY_KPASTERISK
, KEY_7
, KEY_4
, KEY_1
, KEY_STOP
, KEY_LEFT
, \
108 static struct resource keysc_resources
[] = {
112 .end
= 0xe61b0098 - 1,
113 .flags
= IORESOURCE_MEM
,
116 .start
= gic_spi(71),
117 .flags
= IORESOURCE_IRQ
,
121 static struct platform_device keysc_device
= {
124 .num_resources
= ARRAY_SIZE(keysc_resources
),
125 .resource
= keysc_resources
,
127 .platform_data
= &keysc_platdata
,
132 static struct resource fsi_resources
[] = {
136 .end
= 0xEC230400 - 1,
137 .flags
= IORESOURCE_MEM
,
140 .start
= gic_spi(146),
141 .flags
= IORESOURCE_IRQ
,
145 static struct platform_device fsi_device
= {
148 .num_resources
= ARRAY_SIZE(fsi_resources
),
149 .resource
= fsi_resources
,
152 /* Fixed 1.8V regulator to be used by MMCIF */
153 static struct regulator_consumer_supply fixed1v8_power_consumers
[] =
155 REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
156 REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
159 static struct resource sh_mmcif_resources
[] = {
164 .flags
= IORESOURCE_MEM
,
167 .start
= gic_spi(141),
168 .flags
= IORESOURCE_IRQ
,
171 .start
= gic_spi(140),
172 .flags
= IORESOURCE_IRQ
,
176 static struct sh_mmcif_plat_data sh_mmcif_platdata
= {
178 .ocr
= MMC_VDD_165_195
,
179 .caps
= MMC_CAP_8_BIT_DATA
| MMC_CAP_NONREMOVABLE
,
180 .slave_id_tx
= SHDMA_SLAVE_MMCIF_TX
,
181 .slave_id_rx
= SHDMA_SLAVE_MMCIF_RX
,
184 static struct platform_device mmc_device
= {
189 .coherent_dma_mask
= 0xffffffff,
190 .platform_data
= &sh_mmcif_platdata
,
192 .num_resources
= ARRAY_SIZE(sh_mmcif_resources
),
193 .resource
= sh_mmcif_resources
,
197 static struct resource irda_resources
[] = {
200 .end
= 0xE6D01FD4 - 1,
201 .flags
= IORESOURCE_MEM
,
204 .start
= gic_spi(95),
205 .flags
= IORESOURCE_IRQ
,
209 static struct platform_device irda_device
= {
212 .resource
= irda_resources
,
213 .num_resources
= ARRAY_SIZE(irda_resources
),
217 static struct resource mipidsi0_resources
[] = {
222 .flags
= IORESOURCE_MEM
,
228 .flags
= IORESOURCE_MEM
,
232 static int sh_mipi_set_dot_clock(struct platform_device
*pdev
,
236 struct clk
*pck
, *phy
;
239 pck
= clk_get(&pdev
->dev
, "dsip_clk");
242 goto sh_mipi_set_dot_clock_pck_err
;
245 phy
= clk_get(&pdev
->dev
, "dsiphy_clk");
248 goto sh_mipi_set_dot_clock_phy_err
;
252 clk_set_rate(pck
, clk_round_rate(pck
, 24000000));
253 clk_set_rate(phy
, clk_round_rate(pck
, 510000000));
264 sh_mipi_set_dot_clock_phy_err
:
266 sh_mipi_set_dot_clock_pck_err
:
270 static struct sh_mipi_dsi_info mipidsi0_info
= {
271 .data_format
= MIPI_RGB888
,
272 .channel
= LCDC_CHAN_MAINLCD
,
276 .flags
= SH_MIPI_DSI_HSABM
|
277 SH_MIPI_DSI_SYNC_PULSES_MODE
|
278 SH_MIPI_DSI_HSbyteCLK
,
279 .set_dot_clock
= sh_mipi_set_dot_clock
,
282 static struct platform_device mipidsi0_device
= {
283 .name
= "sh-mipi-dsi",
284 .num_resources
= ARRAY_SIZE(mipidsi0_resources
),
285 .resource
= mipidsi0_resources
,
288 .platform_data
= &mipidsi0_info
,
292 static unsigned char lcd_backlight_seq
[3][2] = {
298 static int lcd_backlight_set_brightness(int brightness
)
300 struct i2c_adapter
*adap
;
305 if (brightness
== 0) {
307 gpio_set_value(GPIO_PORT235
, 0);
309 gpio_set_value(GPIO_PORT235
, 1);
313 adap
= i2c_get_adapter(1);
317 for (i
= 0; i
< ARRAY_SIZE(lcd_backlight_seq
); i
++) {
319 msg
.buf
= &lcd_backlight_seq
[i
][0];
323 ret
= i2c_transfer(adap
, &msg
, 1);
328 i2c_put_adapter(adap
);
329 return ret
< 0 ? ret
: 0;
333 static const struct fb_videomode lcdc0_modes
[] = {
335 .name
= "R63302(QHD)",
344 .sync
= FB_SYNC_VERT_HIGH_ACT
| FB_SYNC_HOR_HIGH_ACT
,
348 static struct sh_mobile_lcdc_info lcdc0_info
= {
349 .clock_source
= LCDC_CLK_PERIPHERAL
,
351 .chan
= LCDC_CHAN_MAINLCD
,
352 .interface_type
= RGB24
,
354 .flags
= LCDC_FLAGS_DWPOL
,
355 .fourcc
= V4L2_PIX_FMT_RGB565
,
356 .lcd_modes
= lcdc0_modes
,
357 .num_modes
= ARRAY_SIZE(lcdc0_modes
),
363 .name
= "sh_mobile_lcdc_bl",
365 .set_brightness
= lcd_backlight_set_brightness
,
367 .tx_dev
= &mipidsi0_device
,
371 static struct resource lcdc0_resources
[] = {
374 .start
= 0xfe940000, /* P4-only space */
376 .flags
= IORESOURCE_MEM
,
379 .start
= intcs_evt2irq(0x580),
380 .flags
= IORESOURCE_IRQ
,
384 static struct platform_device lcdc0_device
= {
385 .name
= "sh_mobile_lcdc_fb",
386 .num_resources
= ARRAY_SIZE(lcdc0_resources
),
387 .resource
= lcdc0_resources
,
390 .platform_data
= &lcdc0_info
,
391 .coherent_dma_mask
= ~0,
395 /* Fixed 2.8V regulators to be used by SDHI0 */
396 static struct regulator_consumer_supply fixed2v8_power_consumers
[] =
398 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
399 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
403 static struct sh_mobile_sdhi_info sdhi0_info
= {
404 .dma_slave_tx
= SHDMA_SLAVE_SDHI0_TX
,
405 .dma_slave_rx
= SHDMA_SLAVE_SDHI0_RX
,
406 .tmio_flags
= TMIO_MMC_HAS_IDLE_WAIT
| TMIO_MMC_USE_GPIO_CD
,
407 .tmio_caps
= MMC_CAP_SD_HIGHSPEED
,
408 .tmio_ocr_mask
= MMC_VDD_27_28
| MMC_VDD_28_29
,
409 .cd_gpio
= GPIO_PORT251
,
412 static struct resource sdhi0_resources
[] = {
417 .flags
= IORESOURCE_MEM
,
420 .name
= SH_MOBILE_SDHI_IRQ_CARD_DETECT
,
421 .start
= gic_spi(83),
422 .flags
= IORESOURCE_IRQ
,
425 .name
= SH_MOBILE_SDHI_IRQ_SDCARD
,
426 .start
= gic_spi(84),
427 .flags
= IORESOURCE_IRQ
,
430 .name
= SH_MOBILE_SDHI_IRQ_SDIO
,
431 .start
= gic_spi(85),
432 .flags
= IORESOURCE_IRQ
,
436 static struct platform_device sdhi0_device
= {
437 .name
= "sh_mobile_sdhi",
439 .num_resources
= ARRAY_SIZE(sdhi0_resources
),
440 .resource
= sdhi0_resources
,
442 .platform_data
= &sdhi0_info
,
446 /* Fixed 3.3V regulator to be used by SDHI1 */
447 static struct regulator_consumer_supply cn4_power_consumers
[] =
449 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
450 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
453 static struct regulator_init_data cn4_power_init_data
= {
455 .valid_ops_mask
= REGULATOR_CHANGE_STATUS
,
457 .num_consumer_supplies
= ARRAY_SIZE(cn4_power_consumers
),
458 .consumer_supplies
= cn4_power_consumers
,
461 static struct fixed_voltage_config cn4_power_info
= {
462 .supply_name
= "CN4 SD/MMC Vdd",
463 .microvolts
= 3300000,
464 .gpio
= GPIO_PORT114
,
466 .init_data
= &cn4_power_init_data
,
469 static struct platform_device cn4_power
= {
470 .name
= "reg-fixed-voltage",
473 .platform_data
= &cn4_power_info
,
477 static void ag5evm_sdhi1_set_pwr(struct platform_device
*pdev
, int state
)
479 static int power_gpio
= -EINVAL
;
481 if (power_gpio
< 0) {
482 int ret
= gpio_request(GPIO_PORT114
, "sdhi1_power");
484 power_gpio
= GPIO_PORT114
;
485 gpio_direction_output(power_gpio
, 0);
490 * If requesting the GPIO above failed, it means, that the regulator got
491 * probed and grabbed the GPIO, but we don't know, whether the sdhi
492 * driver already uses the regulator. If it doesn't, we have to toggle
493 * the GPIO ourselves, even though it is now owned by the fixed
494 * regulator driver. We have to live with the race in case the driver
495 * gets unloaded and the GPIO freed between these two steps.
497 gpio_set_value(GPIO_PORT114
, state
);
500 static struct sh_mobile_sdhi_info sh_sdhi1_info
= {
501 .tmio_flags
= TMIO_MMC_WRPROTECT_DISABLE
| TMIO_MMC_HAS_IDLE_WAIT
,
502 .tmio_caps
= MMC_CAP_NONREMOVABLE
| MMC_CAP_SDIO_IRQ
,
503 .tmio_ocr_mask
= MMC_VDD_32_33
| MMC_VDD_33_34
,
504 .set_pwr
= ag5evm_sdhi1_set_pwr
,
507 static struct resource sdhi1_resources
[] = {
512 .flags
= IORESOURCE_MEM
,
515 .name
= SH_MOBILE_SDHI_IRQ_CARD_DETECT
,
516 .start
= gic_spi(87),
517 .flags
= IORESOURCE_IRQ
,
520 .name
= SH_MOBILE_SDHI_IRQ_SDCARD
,
521 .start
= gic_spi(88),
522 .flags
= IORESOURCE_IRQ
,
525 .name
= SH_MOBILE_SDHI_IRQ_SDIO
,
526 .start
= gic_spi(89),
527 .flags
= IORESOURCE_IRQ
,
531 static struct platform_device sdhi1_device
= {
532 .name
= "sh_mobile_sdhi",
535 .platform_data
= &sh_sdhi1_info
,
537 .num_resources
= ARRAY_SIZE(sdhi1_resources
),
538 .resource
= sdhi1_resources
,
541 static struct platform_device
*ag5evm_devices
[] __initdata
= {
554 static void __init
ag5evm_init(void)
556 regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers
,
557 ARRAY_SIZE(fixed1v8_power_consumers
), 1800000);
558 regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers
,
559 ARRAY_SIZE(fixed2v8_power_consumers
), 3300000);
560 regulator_register_fixed(3, dummy_supplies
, ARRAY_SIZE(dummy_supplies
));
562 sh73a0_pinmux_init();
565 gpio_request(GPIO_FN_SCIFA2_TXD1
, NULL
);
566 gpio_request(GPIO_FN_SCIFA2_RXD1
, NULL
);
567 gpio_request(GPIO_FN_SCIFA2_RTS1_
, NULL
);
568 gpio_request(GPIO_FN_SCIFA2_CTS1_
, NULL
);
571 gpio_request(GPIO_FN_KEYIN0_PU
, NULL
);
572 gpio_request(GPIO_FN_KEYIN1_PU
, NULL
);
573 gpio_request(GPIO_FN_KEYIN2_PU
, NULL
);
574 gpio_request(GPIO_FN_KEYIN3_PU
, NULL
);
575 gpio_request(GPIO_FN_KEYIN4_PU
, NULL
);
576 gpio_request(GPIO_FN_KEYIN5_PU
, NULL
);
577 gpio_request(GPIO_FN_KEYIN6_PU
, NULL
);
578 gpio_request(GPIO_FN_KEYIN7_PU
, NULL
);
579 gpio_request(GPIO_FN_KEYOUT0
, NULL
);
580 gpio_request(GPIO_FN_KEYOUT1
, NULL
);
581 gpio_request(GPIO_FN_KEYOUT2
, NULL
);
582 gpio_request(GPIO_FN_KEYOUT3
, NULL
);
583 gpio_request(GPIO_FN_KEYOUT4
, NULL
);
584 gpio_request(GPIO_FN_KEYOUT5
, NULL
);
585 gpio_request(GPIO_FN_PORT59_KEYOUT6
, NULL
);
586 gpio_request(GPIO_FN_PORT58_KEYOUT7
, NULL
);
587 gpio_request(GPIO_FN_KEYOUT8
, NULL
);
588 gpio_request(GPIO_FN_PORT149_KEYOUT9
, NULL
);
590 /* enable I2C channel 2 and 3 */
591 gpio_request(GPIO_FN_PORT236_I2C_SDA2
, NULL
);
592 gpio_request(GPIO_FN_PORT237_I2C_SCL2
, NULL
);
593 gpio_request(GPIO_FN_PORT248_I2C_SCL3
, NULL
);
594 gpio_request(GPIO_FN_PORT249_I2C_SDA3
, NULL
);
597 gpio_request(GPIO_FN_MMCCLK0
, NULL
);
598 gpio_request(GPIO_FN_MMCCMD0_PU
, NULL
);
599 gpio_request(GPIO_FN_MMCD0_0_PU
, NULL
);
600 gpio_request(GPIO_FN_MMCD0_1_PU
, NULL
);
601 gpio_request(GPIO_FN_MMCD0_2_PU
, NULL
);
602 gpio_request(GPIO_FN_MMCD0_3_PU
, NULL
);
603 gpio_request(GPIO_FN_MMCD0_4_PU
, NULL
);
604 gpio_request(GPIO_FN_MMCD0_5_PU
, NULL
);
605 gpio_request(GPIO_FN_MMCD0_6_PU
, NULL
);
606 gpio_request(GPIO_FN_MMCD0_7_PU
, NULL
);
607 gpio_request(GPIO_PORT208
, NULL
); /* Reset */
608 gpio_direction_output(GPIO_PORT208
, 1);
610 /* enable SMSC911X */
611 gpio_request(GPIO_PORT144
, NULL
); /* PINTA2 */
612 gpio_direction_input(GPIO_PORT144
);
613 gpio_request(GPIO_PORT145
, NULL
); /* RESET */
614 gpio_direction_output(GPIO_PORT145
, 1);
617 gpio_request(GPIO_FN_FSIACK
, NULL
);
618 gpio_request(GPIO_FN_FSIAILR
, NULL
);
619 gpio_request(GPIO_FN_FSIAIBT
, NULL
);
620 gpio_request(GPIO_FN_FSIAISLD
, NULL
);
621 gpio_request(GPIO_FN_FSIAOSLD
, NULL
);
624 gpio_request(GPIO_FN_PORT241_IRDA_OUT
, NULL
);
625 gpio_request(GPIO_FN_PORT242_IRDA_IN
, NULL
);
626 gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL
, NULL
);
629 gpio_request(GPIO_PORT217
, NULL
); /* RESET */
630 gpio_direction_output(GPIO_PORT217
, 0);
632 gpio_set_value(GPIO_PORT217
, 1);
635 /* LCD backlight controller */
636 gpio_request(GPIO_PORT235
, NULL
); /* RESET */
637 gpio_direction_output(GPIO_PORT235
, 0);
638 lcd_backlight_set_brightness(0);
640 /* enable SDHI0 on CN15 [SD I/F] */
641 gpio_request(GPIO_FN_SDHIWP0
, NULL
);
642 gpio_request(GPIO_FN_SDHICMD0
, NULL
);
643 gpio_request(GPIO_FN_SDHICLK0
, NULL
);
644 gpio_request(GPIO_FN_SDHID0_3
, NULL
);
645 gpio_request(GPIO_FN_SDHID0_2
, NULL
);
646 gpio_request(GPIO_FN_SDHID0_1
, NULL
);
647 gpio_request(GPIO_FN_SDHID0_0
, NULL
);
649 /* enable SDHI1 on CN4 [WLAN I/F] */
650 gpio_request(GPIO_FN_SDHICLK1
, NULL
);
651 gpio_request(GPIO_FN_SDHICMD1_PU
, NULL
);
652 gpio_request(GPIO_FN_SDHID1_3_PU
, NULL
);
653 gpio_request(GPIO_FN_SDHID1_2_PU
, NULL
);
654 gpio_request(GPIO_FN_SDHID1_1_PU
, NULL
);
655 gpio_request(GPIO_FN_SDHID1_0_PU
, NULL
);
657 #ifdef CONFIG_CACHE_L2X0
658 /* Shared attribute override enable, 64K*8way */
659 l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
661 sh73a0_add_standard_devices();
662 platform_add_devices(ag5evm_devices
, ARRAY_SIZE(ag5evm_devices
));
665 MACHINE_START(AG5EVM
, "ag5evm")
666 .smp
= smp_ops(sh73a0_smp_ops
),
667 .map_io
= sh73a0_map_io
,
668 .init_early
= sh73a0_add_early_devices
,
669 .nr_irqs
= NR_IRQS_LEGACY
,
670 .init_irq
= sh73a0_init_irq
,
671 .handle_irq
= gic_handle_irq
,
672 .init_machine
= ag5evm_init
,
673 .init_late
= shmobile_init_late
,
674 .timer
= &shmobile_timer
,