x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / arm / mm / cache-xsc3l2.c
blob6c3edeb66e74059a7e1398b09c0d224a1e253240
1 /*
2 * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
4 * Copyright (C) 2007 ARM Limited
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 #include <linux/init.h>
20 #include <linux/highmem.h>
21 #include <asm/cp15.h>
22 #include <asm/cputype.h>
23 #include <asm/cacheflush.h>
25 #define CR_L2 (1 << 26)
27 #define CACHE_LINE_SIZE 32
28 #define CACHE_LINE_SHIFT 5
29 #define CACHE_WAY_PER_SET 8
31 #define CACHE_WAY_SIZE(l2ctype) (8192 << (((l2ctype) >> 8) & 0xf))
32 #define CACHE_SET_SIZE(l2ctype) (CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
34 static inline int xsc3_l2_present(void)
36 unsigned long l2ctype;
38 __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
40 return !!(l2ctype & 0xf8);
43 static inline void xsc3_l2_clean_mva(unsigned long addr)
45 __asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
48 static inline void xsc3_l2_inv_mva(unsigned long addr)
50 __asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
53 static inline void xsc3_l2_inv_all(void)
55 unsigned long l2ctype, set_way;
56 int set, way;
58 __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
60 for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
61 for (way = 0; way < CACHE_WAY_PER_SET; way++) {
62 set_way = (way << 29) | (set << 5);
63 __asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
67 dsb();
70 static inline void l2_unmap_va(unsigned long va)
72 #ifdef CONFIG_HIGHMEM
73 if (va != -1)
74 kunmap_atomic((void *)va);
75 #endif
78 static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
80 #ifdef CONFIG_HIGHMEM
81 unsigned long va = prev_va & PAGE_MASK;
82 unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
83 if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
85 * Switching to a new page. Because cache ops are
86 * using virtual addresses only, we must put a mapping
87 * in place for it.
89 l2_unmap_va(prev_va);
90 va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
92 return va + (pa_offset >> (32 - PAGE_SHIFT));
93 #else
94 return __phys_to_virt(pa);
95 #endif
98 static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
100 unsigned long vaddr;
102 if (start == 0 && end == -1ul) {
103 xsc3_l2_inv_all();
104 return;
107 vaddr = -1; /* to force the first mapping */
110 * Clean and invalidate partial first cache line.
112 if (start & (CACHE_LINE_SIZE - 1)) {
113 vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
114 xsc3_l2_clean_mva(vaddr);
115 xsc3_l2_inv_mva(vaddr);
116 start = (start | (CACHE_LINE_SIZE - 1)) + 1;
120 * Invalidate all full cache lines between 'start' and 'end'.
122 while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
123 vaddr = l2_map_va(start, vaddr);
124 xsc3_l2_inv_mva(vaddr);
125 start += CACHE_LINE_SIZE;
129 * Clean and invalidate partial last cache line.
131 if (start < end) {
132 vaddr = l2_map_va(start, vaddr);
133 xsc3_l2_clean_mva(vaddr);
134 xsc3_l2_inv_mva(vaddr);
137 l2_unmap_va(vaddr);
139 dsb();
142 static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
144 unsigned long vaddr;
146 vaddr = -1; /* to force the first mapping */
148 start &= ~(CACHE_LINE_SIZE - 1);
149 while (start < end) {
150 vaddr = l2_map_va(start, vaddr);
151 xsc3_l2_clean_mva(vaddr);
152 start += CACHE_LINE_SIZE;
155 l2_unmap_va(vaddr);
157 dsb();
161 * optimize L2 flush all operation by set/way format
163 static inline void xsc3_l2_flush_all(void)
165 unsigned long l2ctype, set_way;
166 int set, way;
168 __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
170 for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
171 for (way = 0; way < CACHE_WAY_PER_SET; way++) {
172 set_way = (way << 29) | (set << 5);
173 __asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
177 dsb();
180 static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
182 unsigned long vaddr;
184 if (start == 0 && end == -1ul) {
185 xsc3_l2_flush_all();
186 return;
189 vaddr = -1; /* to force the first mapping */
191 start &= ~(CACHE_LINE_SIZE - 1);
192 while (start < end) {
193 vaddr = l2_map_va(start, vaddr);
194 xsc3_l2_clean_mva(vaddr);
195 xsc3_l2_inv_mva(vaddr);
196 start += CACHE_LINE_SIZE;
199 l2_unmap_va(vaddr);
201 dsb();
204 static int __init xsc3_l2_init(void)
206 if (!cpu_is_xsc3() || !xsc3_l2_present())
207 return 0;
209 if (get_cr() & CR_L2) {
210 pr_info("XScale3 L2 cache enabled.\n");
211 xsc3_l2_inv_all();
213 outer_cache.inv_range = xsc3_l2_inv_range;
214 outer_cache.clean_range = xsc3_l2_clean_range;
215 outer_cache.flush_range = xsc3_l2_flush_range;
218 return 0;
220 core_initcall(xsc3_l2_init);