| blob | 16ed796bad87f375b98e21e5804aa375c4648858 |
1 |
2 | decbin.sa 3.3 12/19/90
3 |
4 | Description: Converts normalized packed bcd value pointed to by
5 | register A6 to extended-precision value in FP0.
6 |
7 | Input: Normalized packed bcd value in ETEMP(a6).
8 |
9 | Output: Exact floating-point representation of the packed bcd value.
10 |
11 | Saves and Modifies: D2-D5
12 |
13 | Speed: The program decbin takes ??? cycles to execute.
14 |
15 | Object Size:
16 |
17 | External Reference(s): None.
18 |
19 | Algorithm:
20 | Expected is a normal bcd (i.e. non-exceptional; all inf, zero,
21 | and NaN operands are dispatched without entering this routine)
22 | value in 68881/882 format at location ETEMP(A6).
23 |
24 | A1. Convert the bcd exponent to binary by successive adds and muls.
25 | Set the sign according to SE. Subtract 16 to compensate
26 | for the mantissa which is to be interpreted as 17 integer
27 | digits, rather than 1 integer and 16 fraction digits.
28 | Note: this operation can never overflow.
29 |
30 | A2. Convert the bcd mantissa to binary by successive
31 | adds and muls in FP0. Set the sign according to SM.
32 | The mantissa digits will be converted with the decimal point
33 | assumed following the least-significant digit.
34 | Note: this operation can never overflow.
35 |
36 | A3. Count the number of leading/trailing zeros in the
37 | bcd string. If SE is positive, count the leading zeros;
38 | if negative, count the trailing zeros. Set the adjusted
39 | exponent equal to the exponent from A1 and the zero count
40 | added if SM = 1 and subtracted if SM = 0. Scale the
41 | mantissa the equivalent of forcing in the bcd value:
42 |
43 | SM = 0 a non-zero digit in the integer position
44 | SM = 1 a non-zero digit in Mant0, lsd of the fraction
45 |
46 | this will insure that any value, regardless of its
47 | representation (ex. 0.1E2, 1E1, 10E0, 100E-1), is converted
48 | consistently.
49 |
50 | A4. Calculate the factor 10^exp in FP1 using a table of
51 | 10^(2^n) values. To reduce the error in forming factors
52 | greater than 10^27, a directed rounding scheme is used with
53 | tables rounded to RN, RM, and RP, according to the table
54 | in the comments of the pwrten section.
55 |
56 | A5. Form the final binary number by scaling the mantissa by
57 | the exponent factor. This is done by multiplying the
58 | mantissa in FP0 by the factor in FP1 if the adjusted
59 | exponent sign is positive, and dividing FP0 by FP1 if
60 | it is negative.
61 |
62 | Clean up and return. Check if the final mul or div resulted
63 | in an inex2 exception. If so, set inex1 in the fpsr and
64 | check if the inex1 exception is enabled. If so, set d7 upper
65 | word to $0100. This will signal unimp.sa that an enabled inex1
66 | exception occurred. Unimp will fix the stack.
67 |
69 | Copyright (C) Motorola, Inc. 1990
70 | All Rights Reserved
71 |
72 | For details on the license for this file, please see the
73 | file, README, in this same directory.
75 |DECBIN idnt 2,1 | Motorola 040 Floating Point Software Package
77 |section 8
79 #include "fpsp.h"
81 |
82 | PTENRN, PTENRM, and PTENRP are arrays of powers of 10 rounded
83 | to nearest, minus, and plus, respectively. The tables include
84 | 10**{1,2,4,8,16,32,64,128,256,512,1024,2048,4096}. No rounding
85 | is required until the power is greater than 27, however, all
86 | tables include the first 5 for ease of indexing.
87 |
88 |xref PTENRN
89 |xref PTENRM
90 |xref PTENRP
92 RTABLE: .byte 0,0,0,0
93 .byte 2,3,2,3
94 .byte 2,3,3,2
95 .byte 3,2,2,3
97 .global decbin
98 .global calc_e
99 .global pwrten
100 .global calc_m
101 .global norm
102 .global ap_st_z
103 .global ap_st_n
104 |
105 .set FNIBS,7
106 .set FSTRT,0
107 |
108 .set ESTRT,4
109 .set EDIGITS,2 |
110 |
111 | Constants in single precision
112 FZERO: .long 0x00000000
113 FONE: .long 0x3F800000
114 FTEN: .long 0x41200000
116 .set TEN,10
118 |
119 decbin:
120 | fmovel #0,FPCR ;clr real fpcr
121 moveml %d2-%d5,-(%a7)
122 |
123 | Calculate exponent:
124 | 1. Copy bcd value in memory for use as a working copy.
125 | 2. Calculate absolute value of exponent in d1 by mul and add.
126 | 3. Correct for exponent sign.
127 | 4. Subtract 16 to compensate for interpreting the mant as all integer digits.
128 | (i.e., all digits assumed left of the decimal point.)
129 |
130 | Register usage:
131 |
132 | calc_e:
133 | (*) d0: temp digit storage
134 | (*) d1: accumulator for binary exponent
135 | (*) d2: digit count
136 | (*) d3: offset pointer
137 | ( ) d4: first word of bcd
138 | ( ) a0: pointer to working bcd value
139 | ( ) a6: pointer to original bcd value
140 | (*) FP_SCR1: working copy of original bcd value
141 | (*) L_SCR1: copy of original exponent word
142 |
143 calc_e:
144 movel #EDIGITS,%d2 |# of nibbles (digits) in fraction part
145 moveql #ESTRT,%d3 |counter to pick up digits
146 leal FP_SCR1(%a6),%a0 |load tmp bcd storage address
147 movel ETEMP(%a6),(%a0) |save input bcd value
148 movel ETEMP_HI(%a6),4(%a0) |save words 2 and 3
149 movel ETEMP_LO(%a6),8(%a0) |and work with these
150 movel (%a0),%d4 |get first word of bcd
151 clrl %d1 |zero d1 for accumulator
152 e_gd:
153 mulul #TEN,%d1 |mul partial product by one digit place
154 bfextu %d4{%d3:#4},%d0 |get the digit and zero extend into d0
155 addl %d0,%d1 |d1 = d1 + d0
156 addqb #4,%d3 |advance d3 to the next digit
157 dbf %d2,e_gd |if we have used all 3 digits, exit loop
158 btst #30,%d4 |get SE
159 beqs e_pos |don't negate if pos
160 negl %d1 |negate before subtracting
161 e_pos:
162 subl #16,%d1 |sub to compensate for shift of mant
163 bges e_save |if still pos, do not neg
164 negl %d1 |now negative, make pos and set SE
165 orl #0x40000000,%d4 |set SE in d4,
166 orl #0x40000000,(%a0) |and in working bcd
167 e_save:
168 movel %d1,L_SCR1(%a6) |save exp in memory
169 |
170 |
171 | Calculate mantissa:
172 | 1. Calculate absolute value of mantissa in fp0 by mul and add.
173 | 2. Correct for mantissa sign.
174 | (i.e., all digits assumed left of the decimal point.)
175 |
176 | Register usage:
177 |
178 | calc_m:
179 | (*) d0: temp digit storage
180 | (*) d1: lword counter
181 | (*) d2: digit count
182 | (*) d3: offset pointer
183 | ( ) d4: words 2 and 3 of bcd
184 | ( ) a0: pointer to working bcd value
185 | ( ) a6: pointer to original bcd value
186 | (*) fp0: mantissa accumulator
187 | ( ) FP_SCR1: working copy of original bcd value
188 | ( ) L_SCR1: copy of original exponent word
189 |
190 calc_m:
191 moveql #1,%d1 |word counter, init to 1
192 fmoves FZERO,%fp0 |accumulator
193 |
194 |
195 | Since the packed number has a long word between the first & second parts,
196 | get the integer digit then skip down & get the rest of the
197 | mantissa. We will unroll the loop once.
198 |
199 bfextu (%a0){#28:#4},%d0 |integer part is ls digit in long word
200 faddb %d0,%fp0 |add digit to sum in fp0
201 |
202 |
203 | Get the rest of the mantissa.
204 |
205 loadlw:
206 movel (%a0,%d1.L*4),%d4 |load mantissa longword into d4
207 moveql #FSTRT,%d3 |counter to pick up digits
208 moveql #FNIBS,%d2 |reset number of digits per a0 ptr
209 md2b:
210 fmuls FTEN,%fp0 |fp0 = fp0 * 10
211 bfextu %d4{%d3:#4},%d0 |get the digit and zero extend
212 faddb %d0,%fp0 |fp0 = fp0 + digit
213 |
214 |
215 | If all the digits (8) in that long word have been converted (d2=0),
216 | then inc d1 (=2) to point to the next long word and reset d3 to 0
217 | to initialize the digit offset, and set d2 to 7 for the digit count;
218 | else continue with this long word.
219 |
220 addqb #4,%d3 |advance d3 to the next digit
221 dbf %d2,md2b |check for last digit in this lw
222 nextlw:
223 addql #1,%d1 |inc lw pointer in mantissa
224 cmpl #2,%d1 |test for last lw
225 ble loadlw |if not, get last one
227 |
228 | Check the sign of the mant and make the value in fp0 the same sign.
229 |
230 m_sign:
231 btst #31,(%a0) |test sign of the mantissa
232 beq ap_st_z |if clear, go to append/strip zeros
233 fnegx %fp0 |if set, negate fp0
235 |
236 | Append/strip zeros:
237 |
238 | For adjusted exponents which have an absolute value greater than 27*,
239 | this routine calculates the amount needed to normalize the mantissa
240 | for the adjusted exponent. That number is subtracted from the exp
241 | if the exp was positive, and added if it was negative. The purpose
242 | of this is to reduce the value of the exponent and the possibility
243 | of error in calculation of pwrten.
244 |
245 | 1. Branch on the sign of the adjusted exponent.
246 | 2p.(positive exp)
247 | 2. Check M16 and the digits in lwords 2 and 3 in descending order.
248 | 3. Add one for each zero encountered until a non-zero digit.
249 | 4. Subtract the count from the exp.
250 | 5. Check if the exp has crossed zero in #3 above; make the exp abs
251 | and set SE.
252 | 6. Multiply the mantissa by 10**count.
253 | 2n.(negative exp)
254 | 2. Check the digits in lwords 3 and 2 in descending order.
255 | 3. Add one for each zero encountered until a non-zero digit.
256 | 4. Add the count to the exp.
257 | 5. Check if the exp has crossed zero in #3 above; clear SE.
258 | 6. Divide the mantissa by 10**count.
259 |
260 | *Why 27? If the adjusted exponent is within -28 < expA < 28, than
261 | any adjustment due to append/strip zeros will drive the resultant
262 | exponent towards zero. Since all pwrten constants with a power
263 | of 27 or less are exact, there is no need to use this routine to
264 | attempt to lessen the resultant exponent.
265 |
266 | Register usage:
267 |
268 | ap_st_z:
269 | (*) d0: temp digit storage
270 | (*) d1: zero count
271 | (*) d2: digit count
272 | (*) d3: offset pointer
273 | ( ) d4: first word of bcd
274 | (*) d5: lword counter
275 | ( ) a0: pointer to working bcd value
276 | ( ) FP_SCR1: working copy of original bcd value
277 | ( ) L_SCR1: copy of original exponent word
278 |
279 |
280 | First check the absolute value of the exponent to see if this
281 | routine is necessary. If so, then check the sign of the exponent
282 | and do append (+) or strip (-) zeros accordingly.
283 | This section handles a positive adjusted exponent.
284 |
285 ap_st_z:
286 movel L_SCR1(%a6),%d1 |load expA for range test
287 cmpl #27,%d1 |test is with 27
288 ble pwrten |if abs(expA) <28, skip ap/st zeros
289 btst #30,(%a0) |check sign of exp
290 bne ap_st_n |if neg, go to neg side
291 clrl %d1 |zero count reg
292 movel (%a0),%d4 |load lword 1 to d4
293 bfextu %d4{#28:#4},%d0 |get M16 in d0
294 bnes ap_p_fx |if M16 is non-zero, go fix exp
295 addql #1,%d1 |inc zero count
296 moveql #1,%d5 |init lword counter
297 movel (%a0,%d5.L*4),%d4 |get lword 2 to d4
298 bnes ap_p_cl |if lw 2 is zero, skip it
299 addql #8,%d1 |and inc count by 8
300 addql #1,%d5 |inc lword counter
301 movel (%a0,%d5.L*4),%d4 |get lword 3 to d4
302 ap_p_cl:
303 clrl %d3 |init offset reg
304 moveql #7,%d2 |init digit counter
305 ap_p_gd:
306 bfextu %d4{%d3:#4},%d0 |get digit
307 bnes ap_p_fx |if non-zero, go to fix exp
308 addql #4,%d3 |point to next digit
309 addql #1,%d1 |inc digit counter
310 dbf %d2,ap_p_gd |get next digit
311 ap_p_fx:
312 movel %d1,%d0 |copy counter to d2
313 movel L_SCR1(%a6),%d1 |get adjusted exp from memory
314 subl %d0,%d1 |subtract count from exp
315 bges ap_p_fm |if still pos, go to pwrten
316 negl %d1 |now its neg; get abs
317 movel (%a0),%d4 |load lword 1 to d4
318 orl #0x40000000,%d4 | and set SE in d4
319 orl #0x40000000,(%a0) | and in memory
320 |
321 | Calculate the mantissa multiplier to compensate for the striping of
322 | zeros from the mantissa.
323 |
324 ap_p_fm:
325 movel #PTENRN,%a1 |get address of power-of-ten table
326 clrl %d3 |init table index
327 fmoves FONE,%fp1 |init fp1 to 1
328 moveql #3,%d2 |init d2 to count bits in counter
329 ap_p_el:
330 asrl #1,%d0 |shift lsb into carry
331 bccs ap_p_en |if 1, mul fp1 by pwrten factor
332 fmulx (%a1,%d3),%fp1 |mul by 10**(d3_bit_no)
333 ap_p_en:
334 addl #12,%d3 |inc d3 to next rtable entry
335 tstl %d0 |check if d0 is zero
336 bnes ap_p_el |if not, get next bit
337 fmulx %fp1,%fp0 |mul mantissa by 10**(no_bits_shifted)
338 bra pwrten |go calc pwrten
339 |
340 | This section handles a negative adjusted exponent.
341 |
342 ap_st_n:
343 clrl %d1 |clr counter
344 moveql #2,%d5 |set up d5 to point to lword 3
345 movel (%a0,%d5.L*4),%d4 |get lword 3
346 bnes ap_n_cl |if not zero, check digits
347 subl #1,%d5 |dec d5 to point to lword 2
348 addql #8,%d1 |inc counter by 8
349 movel (%a0,%d5.L*4),%d4 |get lword 2
350 ap_n_cl:
351 movel #28,%d3 |point to last digit
352 moveql #7,%d2 |init digit counter
353 ap_n_gd:
354 bfextu %d4{%d3:#4},%d0 |get digit
355 bnes ap_n_fx |if non-zero, go to exp fix
356 subql #4,%d3 |point to previous digit
357 addql #1,%d1 |inc digit counter
358 dbf %d2,ap_n_gd |get next digit
359 ap_n_fx:
360 movel %d1,%d0 |copy counter to d0
361 movel L_SCR1(%a6),%d1 |get adjusted exp from memory
362 subl %d0,%d1 |subtract count from exp
363 bgts ap_n_fm |if still pos, go fix mantissa
364 negl %d1 |take abs of exp and clr SE
365 movel (%a0),%d4 |load lword 1 to d4
366 andl #0xbfffffff,%d4 | and clr SE in d4
367 andl #0xbfffffff,(%a0) | and in memory
368 |
369 | Calculate the mantissa multiplier to compensate for the appending of
370 | zeros to the mantissa.
371 |
372 ap_n_fm:
373 movel #PTENRN,%a1 |get address of power-of-ten table
374 clrl %d3 |init table index
375 fmoves FONE,%fp1 |init fp1 to 1
376 moveql #3,%d2 |init d2 to count bits in counter
377 ap_n_el:
378 asrl #1,%d0 |shift lsb into carry
379 bccs ap_n_en |if 1, mul fp1 by pwrten factor
380 fmulx (%a1,%d3),%fp1 |mul by 10**(d3_bit_no)
381 ap_n_en:
382 addl #12,%d3 |inc d3 to next rtable entry
383 tstl %d0 |check if d0 is zero
384 bnes ap_n_el |if not, get next bit
385 fdivx %fp1,%fp0 |div mantissa by 10**(no_bits_shifted)
386 |
387 |
388 | Calculate power-of-ten factor from adjusted and shifted exponent.
389 |
390 | Register usage:
391 |
392 | pwrten:
393 | (*) d0: temp
394 | ( ) d1: exponent
395 | (*) d2: {FPCR[6:5],SM,SE} as index in RTABLE; temp
396 | (*) d3: FPCR work copy
397 | ( ) d4: first word of bcd
398 | (*) a1: RTABLE pointer
399 | calc_p:
400 | (*) d0: temp
401 | ( ) d1: exponent
402 | (*) d3: PWRTxx table index
403 | ( ) a0: pointer to working copy of bcd
404 | (*) a1: PWRTxx pointer
405 | (*) fp1: power-of-ten accumulator
406 |
407 | Pwrten calculates the exponent factor in the selected rounding mode
408 | according to the following table:
409 |
410 | Sign of Mant Sign of Exp Rounding Mode PWRTEN Rounding Mode
411 |
412 | ANY ANY RN RN
413 |
414 | + + RP RP
415 | - + RP RM
416 | + - RP RM
417 | - - RP RP
418 |
419 | + + RM RM
420 | - + RM RP
421 | + - RM RP
422 | - - RM RM
423 |
424 | + + RZ RM
425 | - + RZ RM
426 | + - RZ RP
427 | - - RZ RP
428 |
429 |
430 pwrten:
431 movel USER_FPCR(%a6),%d3 |get user's FPCR
432 bfextu %d3{#26:#2},%d2 |isolate rounding mode bits
433 movel (%a0),%d4 |reload 1st bcd word to d4
434 asll #2,%d2 |format d2 to be
435 bfextu %d4{#0:#2},%d0 | {FPCR[6],FPCR[5],SM,SE}
436 addl %d0,%d2 |in d2 as index into RTABLE
437 leal RTABLE,%a1 |load rtable base
438 moveb (%a1,%d2),%d0 |load new rounding bits from table
439 clrl %d3 |clear d3 to force no exc and extended
440 bfins %d0,%d3{#26:#2} |stuff new rounding bits in FPCR
441 fmovel %d3,%FPCR |write new FPCR
442 asrl #1,%d0 |write correct PTENxx table
443 bccs not_rp |to a1
444 leal PTENRP,%a1 |it is RP
445 bras calc_p |go to init section
446 not_rp:
447 asrl #1,%d0 |keep checking
448 bccs not_rm
449 leal PTENRM,%a1 |it is RM
450 bras calc_p |go to init section
451 not_rm:
452 leal PTENRN,%a1 |it is RN
453 calc_p:
454 movel %d1,%d0 |copy exp to d0;use d0
455 bpls no_neg |if exp is negative,
456 negl %d0 |invert it
457 orl #0x40000000,(%a0) |and set SE bit
458 no_neg:
459 clrl %d3 |table index
460 fmoves FONE,%fp1 |init fp1 to 1
461 e_loop:
462 asrl #1,%d0 |shift next bit into carry
463 bccs e_next |if zero, skip the mul
464 fmulx (%a1,%d3),%fp1 |mul by 10**(d3_bit_no)
465 e_next:
466 addl #12,%d3 |inc d3 to next rtable entry
467 tstl %d0 |check if d0 is zero
468 bnes e_loop |not zero, continue shifting
469 |
470 |
471 | Check the sign of the adjusted exp and make the value in fp0 the
472 | same sign. If the exp was pos then multiply fp1*fp0;
473 | else divide fp0/fp1.
474 |
475 | Register Usage:
476 | norm:
477 | ( ) a0: pointer to working bcd value
478 | (*) fp0: mantissa accumulator
479 | ( ) fp1: scaling factor - 10**(abs(exp))
480 |
481 norm:
482 btst #30,(%a0) |test the sign of the exponent
483 beqs mul |if clear, go to multiply
484 div:
485 fdivx %fp1,%fp0 |exp is negative, so divide mant by exp
486 bras end_dec
487 mul:
488 fmulx %fp1,%fp0 |exp is positive, so multiply by exp
489 |
490 |
491 | Clean up and return with result in fp0.
492 |
493 | If the final mul/div in decbin incurred an inex exception,
494 | it will be inex2, but will be reported as inex1 by get_op.
495 |
496 end_dec:
497 fmovel %FPSR,%d0 |get status register
498 bclrl #inex2_bit+8,%d0 |test for inex2 and clear it
499 fmovel %d0,%FPSR |return status reg w/o inex2
500 beqs no_exc |skip this if no exc
501 orl #inx1a_mask,USER_FPSR(%a6) |set inex1/ainex
502 no_exc:
503 moveml (%a7)+,%d2-%d5
504 rts
505 |end