arch/m68k/mac/psc.c

   1 /*
   2  *      Apple Peripheral System Controller (PSC)
   3  *
   4  *      The PSC is used on the AV Macs to control IO functions not handled
   5  *      by the VIAs (Ethernet, DSP, SCC).
   6  *
   7  * TO DO:
   8  *
   9  * Try to figure out what's going on in pIFR5 and pIFR6. There seem to be
  10  * persisant interrupt conditions in those registers and I have no idea what
  11  * they are. Granted it doesn't affect since we're not enabling any interrupts
  12  * on those levels at the moment, but it would be nice to know. I have a feeling
  13  * they aren't actually interrupt lines but data lines (to the DSP?)
  14  */
  15
  16 #include <linux/types.h>
  17 #include <linux/kernel.h>
  18 #include <linux/mm.h>
  19 #include <linux/delay.h>
  20 #include <linux/init.h>
  21 #include <linux/irq.h>
  22
  23 #include <asm/traps.h>
  24 #include <asm/bootinfo.h>
  25 #include <asm/macintosh.h>
  26 #include <asm/macints.h>
  27 #include <asm/mac_psc.h>
  28
  29 #define DEBUG_PSC
  30
  31 int psc_present;
  32 volatile __u8 *psc;
  33
  34 /*
  35  * Debugging dump, used in various places to see what's going on.
  36  */
  37
  38 static void psc_debug_dump(void)
  39 {
  40         int     i;
  41
  42         if (!psc_present) return;
  43         for (i = 0x30 ; i < 0x70 ; i += 0x10) {
  44                 printk("PSC #%d:  IFR = 0x%02X IER = 0x%02X\n",
  45                         i >> 4,
  46                         (int) psc_read_byte(pIFRbase + i),
  47                         (int) psc_read_byte(pIERbase + i));
  48         }
  49 }
  50
  51 /*
  52  * Try to kill all DMA channels on the PSC. Not sure how this his
  53  * supposed to work; this is code lifted from macmace.c and then
  54  * expanded to cover what I think are the other 7 channels.
  55  */
  56
  57 static void psc_dma_die_die_die(void)
  58 {
  59         int i;
  60
  61         printk("Killing all PSC DMA channels...");
  62         for (i = 0 ; i < 9 ; i++) {
  63                 psc_write_word(PSC_CTL_BASE + (i << 4), 0x8800);
  64                 psc_write_word(PSC_CTL_BASE + (i << 4), 0x1000);
  65                 psc_write_word(PSC_CMD_BASE + (i << 5), 0x1100);
  66                 psc_write_word(PSC_CMD_BASE + (i << 5) + 0x10, 0x1100);
  67         }
  68         printk("done!\n");
  69 }
  70
  71 /*
  72  * Initialize the PSC. For now this just involves shutting down all
  73  * interrupt sources using the IERs.
  74  */
  75
  76 void __init psc_init(void)
  77 {
  78         int i;
  79
  80         if (macintosh_config->ident != MAC_MODEL_C660
  81          && macintosh_config->ident != MAC_MODEL_Q840)
  82         {
  83                 psc = NULL;
  84                 psc_present = 0;
  85                 return;
  86         }
  87
  88         /*
  89          * The PSC is always at the same spot, but using psc
  90          * keeps things consistent with the psc_xxxx functions.
  91          */
  92
  93         psc = (void *) PSC_BASE;
  94         psc_present = 1;
  95
  96         printk("PSC detected at %p\n", psc);
  97
  98         psc_dma_die_die_die();
  99
 100 #ifdef DEBUG_PSC
 101         psc_debug_dump();
 102 #endif
 103         /*
 104          * Mask and clear all possible interrupts
 105          */
 106
 107         for (i = 0x30 ; i < 0x70 ; i += 0x10) {
 108                 psc_write_byte(pIERbase + i, 0x0F);
 109                 psc_write_byte(pIFRbase + i, 0x0F);
 110         }
 111 }
 112
 113 /*
 114  * PSC interrupt handler. It's a lot like the VIA interrupt handler.
 115  */
 116
 117 static void psc_irq(unsigned int irq, struct irq_desc *desc)
 118 {
 119         unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
 120         int pIFR        = pIFRbase + offset;
 121         int pIER        = pIERbase + offset;
 122         int irq_num;
 123         unsigned char irq_bit, events;
 124
 125 #ifdef DEBUG_IRQS
 126         printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
 127                 irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
 128 #endif
 129
 130         events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
 131         if (!events)
 132                 return;
 133
 134         irq_num = irq << 3;
 135         irq_bit = 1;
 136         do {
 137                 if (events & irq_bit) {
 138                         psc_write_byte(pIFR, irq_bit);
 139                         generic_handle_irq(irq_num);
 140                 }
 141                 irq_num++;
 142                 irq_bit <<= 1;
 143         } while (events >= irq_bit);
 144 }
 145
 146 /*
 147  * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
 148  */
 149
 150 void __init psc_register_interrupts(void)
 151 {
 152         irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
 153         irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
 154         irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
 155         irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
 156         irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
 157         irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
 158         irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
 159         irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
 160 }
 161
 162 void psc_irq_enable(int irq) {
 163         int irq_src     = IRQ_SRC(irq);
 164         int irq_idx     = IRQ_IDX(irq);
 165         int pIER        = pIERbase + (irq_src << 4);
 166
 167 #ifdef DEBUG_IRQUSE
 168         printk("psc_irq_enable(%d)\n", irq);
 169 #endif
 170         psc_write_byte(pIER, (1 << irq_idx) | 0x80);
 171 }
 172
 173 void psc_irq_disable(int irq) {
 174         int irq_src     = IRQ_SRC(irq);
 175         int irq_idx     = IRQ_IDX(irq);
 176         int pIER        = pIERbase + (irq_src << 4);
 177
 178 #ifdef DEBUG_IRQUSE
 179         printk("psc_irq_disable(%d)\n", irq);
 180 #endif
 181         psc_write_byte(pIER, 1 << irq_idx);
 182 }