x86, efi: Set runtime_version to the EFI spec revision
[linux/fpc-iii.git] / arch / powerpc / sysdev / ge / ge_pic.c
blob2bcb78bb3a15b4ea8043b78b892224d01ef2050f
1 /*
2 * Interrupt handling for GE FPGA based PIC
4 * Author: Martyn Welch <martyn.welch@ge.com>
6 * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
8 * This file is licensed under the terms of the GNU General Public License
9 * version 2. This program is licensed "as is" without any warranty of any
10 * kind, whether express or implied.
13 #include <linux/stddef.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/irq.h>
17 #include <linux/interrupt.h>
18 #include <linux/spinlock.h>
20 #include <asm/byteorder.h>
21 #include <asm/io.h>
22 #include <asm/prom.h>
23 #include <asm/irq.h>
25 #include "ge_pic.h"
27 #define DEBUG
28 #undef DEBUG
30 #ifdef DEBUG
31 #define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
32 #else
33 #define DBG(fmt...) do { } while (0)
34 #endif
36 #define GEF_PIC_NUM_IRQS 32
38 /* Interrupt Controller Interface Registers */
39 #define GEF_PIC_INTR_STATUS 0x0000
41 #define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
42 #define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
43 #define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
45 #define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
46 #define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
47 #define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
50 static DEFINE_RAW_SPINLOCK(gef_pic_lock);
52 static void __iomem *gef_pic_irq_reg_base;
53 static struct irq_domain *gef_pic_irq_host;
54 static int gef_pic_cascade_irq;
57 * Interrupt Controller Handling
59 * The interrupt controller handles interrupts for most on board interrupts,
60 * apart from PCI interrupts. For example on SBC610:
62 * 17:31 RO Reserved
63 * 16 RO PCI Express Doorbell 3 Status
64 * 15 RO PCI Express Doorbell 2 Status
65 * 14 RO PCI Express Doorbell 1 Status
66 * 13 RO PCI Express Doorbell 0 Status
67 * 12 RO Real Time Clock Interrupt Status
68 * 11 RO Temperature Interrupt Status
69 * 10 RO Temperature Critical Interrupt Status
70 * 9 RO Ethernet PHY1 Interrupt Status
71 * 8 RO Ethernet PHY3 Interrupt Status
72 * 7 RO PEX8548 Interrupt Status
73 * 6 RO Reserved
74 * 5 RO Watchdog 0 Interrupt Status
75 * 4 RO Watchdog 1 Interrupt Status
76 * 3 RO AXIS Message FIFO A Interrupt Status
77 * 2 RO AXIS Message FIFO B Interrupt Status
78 * 1 RO AXIS Message FIFO C Interrupt Status
79 * 0 RO AXIS Message FIFO D Interrupt Status
81 * Interrupts can be forwarded to one of two output lines. Nothing
82 * clever is done, so if the masks are incorrectly set, a single input
83 * interrupt could generate interrupts on both output lines!
85 * The dual lines are there to allow the chained interrupts to be easily
86 * passed into two different cores. We currently do not use this functionality
87 * in this driver.
89 * Controller can also be configured to generate Machine checks (MCP), again on
90 * two lines, to be attached to two different cores. It is suggested that these
91 * should be masked out.
94 void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
96 struct irq_chip *chip = irq_desc_get_chip(desc);
97 unsigned int cascade_irq;
100 * See if we actually have an interrupt, call generic handling code if
101 * we do.
103 cascade_irq = gef_pic_get_irq();
105 if (cascade_irq != NO_IRQ)
106 generic_handle_irq(cascade_irq);
108 chip->irq_eoi(&desc->irq_data);
111 static void gef_pic_mask(struct irq_data *d)
113 unsigned long flags;
114 unsigned int hwirq = irqd_to_hwirq(d);
115 u32 mask;
117 raw_spin_lock_irqsave(&gef_pic_lock, flags);
118 mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
119 mask &= ~(1 << hwirq);
120 out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
121 raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
124 static void gef_pic_mask_ack(struct irq_data *d)
126 /* Don't think we actually have to do anything to ack an interrupt,
127 * we just need to clear down the devices interrupt and it will go away
129 gef_pic_mask(d);
132 static void gef_pic_unmask(struct irq_data *d)
134 unsigned long flags;
135 unsigned int hwirq = irqd_to_hwirq(d);
136 u32 mask;
138 raw_spin_lock_irqsave(&gef_pic_lock, flags);
139 mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
140 mask |= (1 << hwirq);
141 out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
142 raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
145 static struct irq_chip gef_pic_chip = {
146 .name = "gefp",
147 .irq_mask = gef_pic_mask,
148 .irq_mask_ack = gef_pic_mask_ack,
149 .irq_unmask = gef_pic_unmask,
153 /* When an interrupt is being configured, this call allows some flexibilty
154 * in deciding which irq_chip structure is used
156 static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
157 irq_hw_number_t hwirq)
159 /* All interrupts are LEVEL sensitive */
160 irq_set_status_flags(virq, IRQ_LEVEL);
161 irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
163 return 0;
166 static int gef_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
167 const u32 *intspec, unsigned int intsize,
168 irq_hw_number_t *out_hwirq, unsigned int *out_flags)
171 *out_hwirq = intspec[0];
172 if (intsize > 1)
173 *out_flags = intspec[1];
174 else
175 *out_flags = IRQ_TYPE_LEVEL_HIGH;
177 return 0;
180 static const struct irq_domain_ops gef_pic_host_ops = {
181 .map = gef_pic_host_map,
182 .xlate = gef_pic_host_xlate,
187 * Initialisation of PIC, this should be called in BSP
189 void __init gef_pic_init(struct device_node *np)
191 unsigned long flags;
193 /* Map the devices registers into memory */
194 gef_pic_irq_reg_base = of_iomap(np, 0);
196 raw_spin_lock_irqsave(&gef_pic_lock, flags);
198 /* Initialise everything as masked. */
199 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
200 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
202 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
203 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
205 raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
207 /* Map controller */
208 gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
209 if (gef_pic_cascade_irq == NO_IRQ) {
210 printk(KERN_ERR "SBC610: failed to map cascade interrupt");
211 return;
214 /* Setup an irq_domain structure */
215 gef_pic_irq_host = irq_domain_add_linear(np, GEF_PIC_NUM_IRQS,
216 &gef_pic_host_ops, NULL);
217 if (gef_pic_irq_host == NULL)
218 return;
220 /* Chain with parent controller */
221 irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
225 * This is called when we receive an interrupt with apparently comes from this
226 * chip - check, returning the highest interrupt generated or return NO_IRQ
228 unsigned int gef_pic_get_irq(void)
230 u32 cause, mask, active;
231 unsigned int virq = NO_IRQ;
232 int hwirq;
234 cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
236 mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
238 active = cause & mask;
240 if (active) {
241 for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
242 if (active & (0x1 << hwirq))
243 break;
245 virq = irq_linear_revmap(gef_pic_irq_host,
246 (irq_hw_number_t)hwirq);
249 return virq;