2 * Copyright (C) 2010 Juergen Beisert, Pengutronix
4 * This code is based on:
5 * Author: Vitaly Wool <vital@embeddedalley.com>
7 * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
8 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 #define DRIVER_NAME "mxsfb"
24 * @brief LCDIF driver for i.MX23 and i.MX28
26 * The LCDIF support four modes of operation
27 * - MPU interface (to drive smart displays) -> not supported yet
28 * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
29 * - Dotclock interface (to drive LC displays with RGB data and sync signals)
30 * - DVI (to drive ITU-R BT656) -> not supported yet
32 * This driver depends on a correct setup of the pins used for this purpose
33 * (platform specific).
35 * For the developer: Don't forget to set the data bus width to the display
36 * in the imx_fb_videomode structure. You will else end up with ugly colours.
37 * If you fight against jitter you can vary the clock delay. This is a feature
38 * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
39 * the required value in the imx_fb_videomode structure.
42 #include <linux/module.h>
43 #include <linux/kernel.h>
44 #include <linux/of_device.h>
45 #include <linux/platform_device.h>
46 #include <linux/clk.h>
47 #include <linux/dma-mapping.h>
50 #include <linux/regulator/consumer.h>
51 #include <video/of_display_timing.h>
52 #include <video/videomode.h>
57 #define LCDC_CTRL 0x00
58 #define LCDC_CTRL1 0x10
59 #define LCDC_V4_CTRL2 0x20
60 #define LCDC_V3_TRANSFER_COUNT 0x20
61 #define LCDC_V4_TRANSFER_COUNT 0x30
62 #define LCDC_V4_CUR_BUF 0x40
63 #define LCDC_V4_NEXT_BUF 0x50
64 #define LCDC_V3_CUR_BUF 0x30
65 #define LCDC_V3_NEXT_BUF 0x40
66 #define LCDC_TIMING 0x60
67 #define LCDC_VDCTRL0 0x70
68 #define LCDC_VDCTRL1 0x80
69 #define LCDC_VDCTRL2 0x90
70 #define LCDC_VDCTRL3 0xa0
71 #define LCDC_VDCTRL4 0xb0
72 #define LCDC_DVICTRL0 0xc0
73 #define LCDC_DVICTRL1 0xd0
74 #define LCDC_DVICTRL2 0xe0
75 #define LCDC_DVICTRL3 0xf0
76 #define LCDC_DVICTRL4 0x100
77 #define LCDC_V4_DATA 0x180
78 #define LCDC_V3_DATA 0x1b0
79 #define LCDC_V4_DEBUG0 0x1d0
80 #define LCDC_V3_DEBUG0 0x1f0
82 #define CTRL_SFTRST (1 << 31)
83 #define CTRL_CLKGATE (1 << 30)
84 #define CTRL_BYPASS_COUNT (1 << 19)
85 #define CTRL_VSYNC_MODE (1 << 18)
86 #define CTRL_DOTCLK_MODE (1 << 17)
87 #define CTRL_DATA_SELECT (1 << 16)
88 #define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
89 #define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
90 #define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
91 #define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
92 #define CTRL_MASTER (1 << 5)
93 #define CTRL_DF16 (1 << 3)
94 #define CTRL_DF18 (1 << 2)
95 #define CTRL_DF24 (1 << 1)
96 #define CTRL_RUN (1 << 0)
98 #define CTRL1_FIFO_CLEAR (1 << 21)
99 #define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
100 #define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
102 #define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
103 #define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
104 #define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
105 #define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
108 #define VDCTRL0_ENABLE_PRESENT (1 << 28)
109 #define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
110 #define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
111 #define VDCTRL0_DOTCLK_ACT_FALLING (1 << 25)
112 #define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
113 #define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
114 #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
115 #define VDCTRL0_HALF_LINE (1 << 19)
116 #define VDCTRL0_HALF_LINE_MODE (1 << 18)
117 #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
118 #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
120 #define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
121 #define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
123 #define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
124 #define VDCTRL3_VSYNC_ONLY (1 << 28)
125 #define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
126 #define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
127 #define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
128 #define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
130 #define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
131 #define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
132 #define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
133 #define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
135 #define DEBUG0_HSYNC (1 < 26)
136 #define DEBUG0_VSYNC (1 < 25)
146 #define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */
147 #define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
148 #define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
149 #define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
151 #define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
152 #define MXSFB_SYNC_DOTCLK_FALLING_ACT (1 << 7) /* negtive edge sampling */
159 /* CPU dependent register offsets */
160 struct mxsfb_devdata
{
161 unsigned transfer_count
;
165 unsigned hs_wdth_mask
;
166 unsigned hs_wdth_shift
;
171 struct fb_info fb_info
;
172 struct platform_device
*pdev
;
174 void __iomem
*base
; /* registers */
175 unsigned allocated_size
;
177 unsigned ld_intf_width
;
178 unsigned dotclk_delay
;
179 const struct mxsfb_devdata
*devdata
;
181 struct regulator
*reg_lcd
;
184 #define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
185 #define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
187 static const struct mxsfb_devdata mxsfb_devdata
[] = {
189 .transfer_count
= LCDC_V3_TRANSFER_COUNT
,
190 .cur_buf
= LCDC_V3_CUR_BUF
,
191 .next_buf
= LCDC_V3_NEXT_BUF
,
192 .debug0
= LCDC_V3_DEBUG0
,
193 .hs_wdth_mask
= 0xff,
198 .transfer_count
= LCDC_V4_TRANSFER_COUNT
,
199 .cur_buf
= LCDC_V4_CUR_BUF
,
200 .next_buf
= LCDC_V4_NEXT_BUF
,
201 .debug0
= LCDC_V4_DEBUG0
,
202 .hs_wdth_mask
= 0x3fff,
208 #define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info))
210 /* mask and shift depends on architecture */
211 static inline u32
set_hsync_pulse_width(struct mxsfb_info
*host
, unsigned val
)
213 return (val
& host
->devdata
->hs_wdth_mask
) <<
214 host
->devdata
->hs_wdth_shift
;
217 static inline u32
get_hsync_pulse_width(struct mxsfb_info
*host
, unsigned val
)
219 return (val
>> host
->devdata
->hs_wdth_shift
) &
220 host
->devdata
->hs_wdth_mask
;
223 static const struct fb_bitfield def_rgb565
[] = {
236 [TRANSP
] = { /* no support for transparency */
241 static const struct fb_bitfield def_rgb888
[] = {
254 [TRANSP
] = { /* no support for transparency */
259 static inline unsigned chan_to_field(unsigned chan
, struct fb_bitfield
*bf
)
262 chan
>>= 16 - bf
->length
;
263 return chan
<< bf
->offset
;
266 static int mxsfb_check_var(struct fb_var_screeninfo
*var
,
267 struct fb_info
*fb_info
)
269 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
270 const struct fb_bitfield
*rgb
= NULL
;
272 if (var
->xres
< MIN_XRES
)
273 var
->xres
= MIN_XRES
;
274 if (var
->yres
< MIN_YRES
)
275 var
->yres
= MIN_YRES
;
277 var
->xres_virtual
= var
->xres
;
279 var
->yres_virtual
= var
->yres
;
281 switch (var
->bits_per_pixel
) {
283 /* always expect RGB 565 */
287 switch (host
->ld_intf_width
) {
289 pr_debug("Unsupported LCD bus width mapping\n");
300 pr_debug("Unsupported colour depth: %u\n", var
->bits_per_pixel
);
305 * Copy the RGB parameters for this display
306 * from the machine specific parameters.
309 var
->green
= rgb
[GREEN
];
310 var
->blue
= rgb
[BLUE
];
311 var
->transp
= rgb
[TRANSP
];
316 static void mxsfb_enable_controller(struct fb_info
*fb_info
)
318 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
322 dev_dbg(&host
->pdev
->dev
, "%s\n", __func__
);
325 ret
= regulator_enable(host
->reg_lcd
);
327 dev_err(&host
->pdev
->dev
,
328 "lcd regulator enable failed: %d\n", ret
);
333 clk_prepare_enable(host
->clk
);
334 clk_set_rate(host
->clk
, PICOS2KHZ(fb_info
->var
.pixclock
) * 1000U);
336 /* if it was disabled, re-enable the mode again */
337 writel(CTRL_DOTCLK_MODE
, host
->base
+ LCDC_CTRL
+ REG_SET
);
339 /* enable the SYNC signals first, then the DMA engine */
340 reg
= readl(host
->base
+ LCDC_VDCTRL4
);
341 reg
|= VDCTRL4_SYNC_SIGNALS_ON
;
342 writel(reg
, host
->base
+ LCDC_VDCTRL4
);
344 writel(CTRL_RUN
, host
->base
+ LCDC_CTRL
+ REG_SET
);
349 static void mxsfb_disable_controller(struct fb_info
*fb_info
)
351 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
356 dev_dbg(&host
->pdev
->dev
, "%s\n", __func__
);
359 * Even if we disable the controller here, it will still continue
360 * until its FIFOs are running out of data
362 writel(CTRL_DOTCLK_MODE
, host
->base
+ LCDC_CTRL
+ REG_CLR
);
366 reg
= readl(host
->base
+ LCDC_CTRL
);
367 if (!(reg
& CTRL_RUN
))
372 reg
= readl(host
->base
+ LCDC_VDCTRL4
);
373 writel(reg
& ~VDCTRL4_SYNC_SIGNALS_ON
, host
->base
+ LCDC_VDCTRL4
);
375 clk_disable_unprepare(host
->clk
);
380 ret
= regulator_disable(host
->reg_lcd
);
382 dev_err(&host
->pdev
->dev
,
383 "lcd regulator disable failed: %d\n", ret
);
387 static int mxsfb_set_par(struct fb_info
*fb_info
)
389 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
390 u32 ctrl
, vdctrl0
, vdctrl4
;
391 int line_size
, fb_size
;
394 line_size
= fb_info
->var
.xres
* (fb_info
->var
.bits_per_pixel
>> 3);
395 fb_size
= fb_info
->var
.yres_virtual
* line_size
;
397 if (fb_size
> fb_info
->fix
.smem_len
)
400 fb_info
->fix
.line_length
= line_size
;
403 * It seems, you can't re-program the controller if it is still running.
404 * This may lead into shifted pictures (FIFO issue?).
405 * So, first stop the controller and drain its FIFOs
409 mxsfb_disable_controller(fb_info
);
412 /* clear the FIFOs */
413 writel(CTRL1_FIFO_CLEAR
, host
->base
+ LCDC_CTRL1
+ REG_SET
);
415 ctrl
= CTRL_BYPASS_COUNT
| CTRL_MASTER
|
416 CTRL_SET_BUS_WIDTH(host
->ld_intf_width
);
418 switch (fb_info
->var
.bits_per_pixel
) {
420 dev_dbg(&host
->pdev
->dev
, "Setting up RGB565 mode\n");
421 ctrl
|= CTRL_SET_WORD_LENGTH(0);
422 writel(CTRL1_SET_BYTE_PACKAGING(0xf), host
->base
+ LCDC_CTRL1
);
425 dev_dbg(&host
->pdev
->dev
, "Setting up RGB888/666 mode\n");
426 ctrl
|= CTRL_SET_WORD_LENGTH(3);
427 switch (host
->ld_intf_width
) {
429 dev_dbg(&host
->pdev
->dev
,
430 "Unsupported LCD bus width mapping\n");
438 /* do not use packed pixels = one pixel per word instead */
439 writel(CTRL1_SET_BYTE_PACKAGING(0x7), host
->base
+ LCDC_CTRL1
);
442 dev_dbg(&host
->pdev
->dev
, "Unhandled color depth of %u\n",
443 fb_info
->var
.bits_per_pixel
);
447 writel(ctrl
, host
->base
+ LCDC_CTRL
);
449 writel(TRANSFER_COUNT_SET_VCOUNT(fb_info
->var
.yres
) |
450 TRANSFER_COUNT_SET_HCOUNT(fb_info
->var
.xres
),
451 host
->base
+ host
->devdata
->transfer_count
);
453 vdctrl0
= VDCTRL0_ENABLE_PRESENT
| /* always in DOTCLOCK mode */
454 VDCTRL0_VSYNC_PERIOD_UNIT
|
455 VDCTRL0_VSYNC_PULSE_WIDTH_UNIT
|
456 VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info
->var
.vsync_len
);
457 if (fb_info
->var
.sync
& FB_SYNC_HOR_HIGH_ACT
)
458 vdctrl0
|= VDCTRL0_HSYNC_ACT_HIGH
;
459 if (fb_info
->var
.sync
& FB_SYNC_VERT_HIGH_ACT
)
460 vdctrl0
|= VDCTRL0_VSYNC_ACT_HIGH
;
461 if (host
->sync
& MXSFB_SYNC_DATA_ENABLE_HIGH_ACT
)
462 vdctrl0
|= VDCTRL0_ENABLE_ACT_HIGH
;
463 if (host
->sync
& MXSFB_SYNC_DOTCLK_FALLING_ACT
)
464 vdctrl0
|= VDCTRL0_DOTCLK_ACT_FALLING
;
466 writel(vdctrl0
, host
->base
+ LCDC_VDCTRL0
);
468 /* frame length in lines */
469 writel(fb_info
->var
.upper_margin
+ fb_info
->var
.vsync_len
+
470 fb_info
->var
.lower_margin
+ fb_info
->var
.yres
,
471 host
->base
+ LCDC_VDCTRL1
);
473 /* line length in units of clocks or pixels */
474 writel(set_hsync_pulse_width(host
, fb_info
->var
.hsync_len
) |
475 VDCTRL2_SET_HSYNC_PERIOD(fb_info
->var
.left_margin
+
476 fb_info
->var
.hsync_len
+ fb_info
->var
.right_margin
+
478 host
->base
+ LCDC_VDCTRL2
);
480 writel(SET_HOR_WAIT_CNT(fb_info
->var
.left_margin
+
481 fb_info
->var
.hsync_len
) |
482 SET_VERT_WAIT_CNT(fb_info
->var
.upper_margin
+
483 fb_info
->var
.vsync_len
),
484 host
->base
+ LCDC_VDCTRL3
);
486 vdctrl4
= SET_DOTCLK_H_VALID_DATA_CNT(fb_info
->var
.xres
);
487 if (mxsfb_is_v4(host
))
488 vdctrl4
|= VDCTRL4_SET_DOTCLK_DLY(host
->dotclk_delay
);
489 writel(vdctrl4
, host
->base
+ LCDC_VDCTRL4
);
491 writel(fb_info
->fix
.smem_start
+
492 fb_info
->fix
.line_length
* fb_info
->var
.yoffset
,
493 host
->base
+ host
->devdata
->next_buf
);
496 mxsfb_enable_controller(fb_info
);
501 static int mxsfb_setcolreg(u_int regno
, u_int red
, u_int green
, u_int blue
,
502 u_int transp
, struct fb_info
*fb_info
)
508 * If greyscale is true, then we convert the RGB value
509 * to greyscale no matter what visual we are using.
511 if (fb_info
->var
.grayscale
)
512 red
= green
= blue
= (19595 * red
+ 38470 * green
+
515 switch (fb_info
->fix
.visual
) {
516 case FB_VISUAL_TRUECOLOR
:
518 * 12 or 16-bit True Colour. We encode the RGB value
519 * according to the RGB bitfield information.
522 u32
*pal
= fb_info
->pseudo_palette
;
524 val
= chan_to_field(red
, &fb_info
->var
.red
);
525 val
|= chan_to_field(green
, &fb_info
->var
.green
);
526 val
|= chan_to_field(blue
, &fb_info
->var
.blue
);
533 case FB_VISUAL_STATIC_PSEUDOCOLOR
:
534 case FB_VISUAL_PSEUDOCOLOR
:
541 static int mxsfb_blank(int blank
, struct fb_info
*fb_info
)
543 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
546 case FB_BLANK_POWERDOWN
:
547 case FB_BLANK_VSYNC_SUSPEND
:
548 case FB_BLANK_HSYNC_SUSPEND
:
549 case FB_BLANK_NORMAL
:
551 mxsfb_disable_controller(fb_info
);
554 case FB_BLANK_UNBLANK
:
556 mxsfb_enable_controller(fb_info
);
562 static int mxsfb_pan_display(struct fb_var_screeninfo
*var
,
563 struct fb_info
*fb_info
)
565 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
568 if (var
->xoffset
!= 0)
571 offset
= fb_info
->fix
.line_length
* var
->yoffset
;
573 /* update on next VSYNC */
574 writel(fb_info
->fix
.smem_start
+ offset
,
575 host
->base
+ host
->devdata
->next_buf
);
580 static struct fb_ops mxsfb_ops
= {
581 .owner
= THIS_MODULE
,
582 .fb_check_var
= mxsfb_check_var
,
583 .fb_set_par
= mxsfb_set_par
,
584 .fb_setcolreg
= mxsfb_setcolreg
,
585 .fb_blank
= mxsfb_blank
,
586 .fb_pan_display
= mxsfb_pan_display
,
587 .fb_fillrect
= cfb_fillrect
,
588 .fb_copyarea
= cfb_copyarea
,
589 .fb_imageblit
= cfb_imageblit
,
592 static int mxsfb_restore_mode(struct mxsfb_info
*host
)
594 struct fb_info
*fb_info
= &host
->fb_info
;
597 unsigned long pa
, fbsize
;
598 int bits_per_pixel
, ofs
;
599 u32 transfer_count
, vdctrl0
, vdctrl2
, vdctrl3
, vdctrl4
, ctrl
;
600 struct fb_videomode vmode
;
602 /* Only restore the mode when the controller is running */
603 ctrl
= readl(host
->base
+ LCDC_CTRL
);
604 if (!(ctrl
& CTRL_RUN
))
607 vdctrl0
= readl(host
->base
+ LCDC_VDCTRL0
);
608 vdctrl2
= readl(host
->base
+ LCDC_VDCTRL2
);
609 vdctrl3
= readl(host
->base
+ LCDC_VDCTRL3
);
610 vdctrl4
= readl(host
->base
+ LCDC_VDCTRL4
);
612 transfer_count
= readl(host
->base
+ host
->devdata
->transfer_count
);
614 vmode
.xres
= TRANSFER_COUNT_GET_HCOUNT(transfer_count
);
615 vmode
.yres
= TRANSFER_COUNT_GET_VCOUNT(transfer_count
);
617 switch (CTRL_GET_WORD_LENGTH(ctrl
)) {
628 fb_info
->var
.bits_per_pixel
= bits_per_pixel
;
630 vmode
.pixclock
= KHZ2PICOS(clk_get_rate(host
->clk
) / 1000U);
631 vmode
.hsync_len
= get_hsync_pulse_width(host
, vdctrl2
);
632 vmode
.left_margin
= GET_HOR_WAIT_CNT(vdctrl3
) - vmode
.hsync_len
;
633 vmode
.right_margin
= VDCTRL2_GET_HSYNC_PERIOD(vdctrl2
) - vmode
.hsync_len
-
634 vmode
.left_margin
- vmode
.xres
;
635 vmode
.vsync_len
= VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0
);
636 period
= readl(host
->base
+ LCDC_VDCTRL1
);
637 vmode
.upper_margin
= GET_VERT_WAIT_CNT(vdctrl3
) - vmode
.vsync_len
;
638 vmode
.lower_margin
= period
- vmode
.vsync_len
- vmode
.upper_margin
- vmode
.yres
;
640 vmode
.vmode
= FB_VMODE_NONINTERLACED
;
643 if (vdctrl0
& VDCTRL0_HSYNC_ACT_HIGH
)
644 vmode
.sync
|= FB_SYNC_HOR_HIGH_ACT
;
645 if (vdctrl0
& VDCTRL0_VSYNC_ACT_HIGH
)
646 vmode
.sync
|= FB_SYNC_VERT_HIGH_ACT
;
648 pr_debug("Reconstructed video mode:\n");
649 pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
650 vmode
.xres
, vmode
.yres
,
651 vmode
.hsync_len
, vmode
.left_margin
, vmode
.right_margin
,
652 vmode
.vsync_len
, vmode
.upper_margin
, vmode
.lower_margin
);
653 pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode
.pixclock
));
655 fb_add_videomode(&vmode
, &fb_info
->modelist
);
657 host
->ld_intf_width
= CTRL_GET_BUS_WIDTH(ctrl
);
658 host
->dotclk_delay
= VDCTRL4_GET_DOTCLK_DLY(vdctrl4
);
660 fb_info
->fix
.line_length
= vmode
.xres
* (bits_per_pixel
>> 3);
662 pa
= readl(host
->base
+ host
->devdata
->cur_buf
);
663 fbsize
= fb_info
->fix
.line_length
* vmode
.yres
;
664 if (pa
< fb_info
->fix
.smem_start
)
666 if (pa
+ fbsize
> fb_info
->fix
.smem_start
+ fb_info
->fix
.smem_len
)
668 ofs
= pa
- fb_info
->fix
.smem_start
;
670 memmove(fb_info
->screen_base
, fb_info
->screen_base
+ ofs
, fbsize
);
671 writel(fb_info
->fix
.smem_start
, host
->base
+ host
->devdata
->next_buf
);
674 line_count
= fb_info
->fix
.smem_len
/ fb_info
->fix
.line_length
;
675 fb_info
->fix
.ypanstep
= 1;
677 clk_prepare_enable(host
->clk
);
683 static int mxsfb_init_fbinfo_dt(struct mxsfb_info
*host
)
685 struct fb_info
*fb_info
= &host
->fb_info
;
686 struct fb_var_screeninfo
*var
= &fb_info
->var
;
687 struct device
*dev
= &host
->pdev
->dev
;
688 struct device_node
*np
= host
->pdev
->dev
.of_node
;
689 struct device_node
*display_np
;
690 struct device_node
*timings_np
;
691 struct display_timings
*timings
;
696 display_np
= of_parse_phandle(np
, "display", 0);
698 dev_err(dev
, "failed to find display phandle\n");
702 ret
= of_property_read_u32(display_np
, "bus-width", &width
);
704 dev_err(dev
, "failed to get property bus-width\n");
705 goto put_display_node
;
710 host
->ld_intf_width
= STMLCDIF_8BIT
;
713 host
->ld_intf_width
= STMLCDIF_16BIT
;
716 host
->ld_intf_width
= STMLCDIF_18BIT
;
719 host
->ld_intf_width
= STMLCDIF_24BIT
;
722 dev_err(dev
, "invalid bus-width value\n");
724 goto put_display_node
;
727 ret
= of_property_read_u32(display_np
, "bits-per-pixel",
728 &var
->bits_per_pixel
);
730 dev_err(dev
, "failed to get property bits-per-pixel\n");
731 goto put_display_node
;
734 timings
= of_get_display_timings(display_np
);
736 dev_err(dev
, "failed to get display timings\n");
738 goto put_display_node
;
741 timings_np
= of_find_node_by_name(display_np
,
744 dev_err(dev
, "failed to find display-timings node\n");
746 goto put_display_node
;
749 for (i
= 0; i
< of_get_child_count(timings_np
); i
++) {
751 struct fb_videomode fb_vm
;
753 ret
= videomode_from_timings(timings
, &vm
, i
);
755 goto put_timings_node
;
756 ret
= fb_videomode_from_videomode(&vm
, &fb_vm
);
758 goto put_timings_node
;
760 if (vm
.flags
& DISPLAY_FLAGS_DE_HIGH
)
761 host
->sync
|= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT
;
762 if (vm
.flags
& DISPLAY_FLAGS_PIXDATA_NEGEDGE
)
763 host
->sync
|= MXSFB_SYNC_DOTCLK_FALLING_ACT
;
764 fb_add_videomode(&fb_vm
, &fb_info
->modelist
);
768 of_node_put(timings_np
);
770 of_node_put(display_np
);
774 static int mxsfb_init_fbinfo(struct mxsfb_info
*host
)
776 struct fb_info
*fb_info
= &host
->fb_info
;
777 struct fb_var_screeninfo
*var
= &fb_info
->var
;
783 fb_info
->fbops
= &mxsfb_ops
;
784 fb_info
->flags
= FBINFO_FLAG_DEFAULT
| FBINFO_READS_FAST
;
785 strlcpy(fb_info
->fix
.id
, "mxs", sizeof(fb_info
->fix
.id
));
786 fb_info
->fix
.type
= FB_TYPE_PACKED_PIXELS
;
787 fb_info
->fix
.ypanstep
= 1;
788 fb_info
->fix
.visual
= FB_VISUAL_TRUECOLOR
,
789 fb_info
->fix
.accel
= FB_ACCEL_NONE
;
791 ret
= mxsfb_init_fbinfo_dt(host
);
796 var
->activate
= FB_ACTIVATE_NOW
;
797 var
->accel_flags
= 0;
798 var
->vmode
= FB_VMODE_NONINTERLACED
;
800 /* Memory allocation for framebuffer */
802 fb_virt
= alloc_pages_exact(fb_size
, GFP_DMA
);
806 fb_phys
= virt_to_phys(fb_virt
);
808 fb_info
->fix
.smem_start
= fb_phys
;
809 fb_info
->screen_base
= fb_virt
;
810 fb_info
->screen_size
= fb_info
->fix
.smem_len
= fb_size
;
812 if (mxsfb_restore_mode(host
))
813 memset(fb_virt
, 0, fb_size
);
818 static void mxsfb_free_videomem(struct mxsfb_info
*host
)
820 struct fb_info
*fb_info
= &host
->fb_info
;
822 free_pages_exact(fb_info
->screen_base
, fb_info
->fix
.smem_len
);
825 static struct platform_device_id mxsfb_devtype
[] = {
828 .driver_data
= MXSFB_V3
,
831 .driver_data
= MXSFB_V4
,
836 MODULE_DEVICE_TABLE(platform
, mxsfb_devtype
);
838 static const struct of_device_id mxsfb_dt_ids
[] = {
839 { .compatible
= "fsl,imx23-lcdif", .data
= &mxsfb_devtype
[0], },
840 { .compatible
= "fsl,imx28-lcdif", .data
= &mxsfb_devtype
[1], },
843 MODULE_DEVICE_TABLE(of
, mxsfb_dt_ids
);
845 static int mxsfb_probe(struct platform_device
*pdev
)
847 const struct of_device_id
*of_id
=
848 of_match_device(mxsfb_dt_ids
, &pdev
->dev
);
849 struct resource
*res
;
850 struct mxsfb_info
*host
;
851 struct fb_info
*fb_info
;
852 struct fb_modelist
*modelist
;
856 pdev
->id_entry
= of_id
->data
;
858 fb_info
= framebuffer_alloc(sizeof(struct mxsfb_info
), &pdev
->dev
);
860 dev_err(&pdev
->dev
, "Failed to allocate fbdev\n");
864 host
= to_imxfb_host(fb_info
);
866 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
867 host
->base
= devm_ioremap_resource(&pdev
->dev
, res
);
868 if (IS_ERR(host
->base
)) {
869 ret
= PTR_ERR(host
->base
);
874 platform_set_drvdata(pdev
, host
);
876 host
->devdata
= &mxsfb_devdata
[pdev
->id_entry
->driver_data
];
878 host
->clk
= devm_clk_get(&host
->pdev
->dev
, NULL
);
879 if (IS_ERR(host
->clk
)) {
880 ret
= PTR_ERR(host
->clk
);
884 host
->reg_lcd
= devm_regulator_get(&pdev
->dev
, "lcd");
885 if (IS_ERR(host
->reg_lcd
))
886 host
->reg_lcd
= NULL
;
888 fb_info
->pseudo_palette
= devm_kzalloc(&pdev
->dev
, sizeof(u32
) * 16,
890 if (!fb_info
->pseudo_palette
) {
895 INIT_LIST_HEAD(&fb_info
->modelist
);
897 ret
= mxsfb_init_fbinfo(host
);
901 modelist
= list_first_entry(&fb_info
->modelist
,
902 struct fb_modelist
, list
);
903 fb_videomode_to_var(&fb_info
->var
, &modelist
->mode
);
905 /* init the color fields */
906 mxsfb_check_var(&fb_info
->var
, fb_info
);
908 platform_set_drvdata(pdev
, fb_info
);
910 ret
= register_framebuffer(fb_info
);
912 dev_err(&pdev
->dev
,"Failed to register framebuffer\n");
916 if (!host
->enabled
) {
917 writel(0, host
->base
+ LCDC_CTRL
);
918 mxsfb_set_par(fb_info
);
919 mxsfb_enable_controller(fb_info
);
922 dev_info(&pdev
->dev
, "initialized\n");
928 clk_disable_unprepare(host
->clk
);
929 fb_destroy_modelist(&fb_info
->modelist
);
931 framebuffer_release(fb_info
);
936 static int mxsfb_remove(struct platform_device
*pdev
)
938 struct fb_info
*fb_info
= platform_get_drvdata(pdev
);
939 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
942 mxsfb_disable_controller(fb_info
);
944 unregister_framebuffer(fb_info
);
945 mxsfb_free_videomem(host
);
947 framebuffer_release(fb_info
);
952 static void mxsfb_shutdown(struct platform_device
*pdev
)
954 struct fb_info
*fb_info
= platform_get_drvdata(pdev
);
955 struct mxsfb_info
*host
= to_imxfb_host(fb_info
);
958 * Force stop the LCD controller as keeping it running during reboot
959 * might interfere with the BootROM's boot mode pads sampling.
961 writel(CTRL_RUN
, host
->base
+ LCDC_CTRL
+ REG_CLR
);
964 static struct platform_driver mxsfb_driver
= {
965 .probe
= mxsfb_probe
,
966 .remove
= mxsfb_remove
,
967 .shutdown
= mxsfb_shutdown
,
968 .id_table
= mxsfb_devtype
,
971 .of_match_table
= mxsfb_dt_ids
,
975 module_platform_driver(mxsfb_driver
);
977 MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
978 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
979 MODULE_LICENSE("GPL");