2 * Support PCI/PCIe on PowerNV platforms
4 * Currently supports only P5IOC2
6 * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/delay.h>
17 #include <linux/string.h>
18 #include <linux/init.h>
19 #include <linux/bootmem.h>
20 #include <linux/irq.h>
22 #include <linux/msi.h>
24 #include <asm/sections.h>
27 #include <asm/pci-bridge.h>
28 #include <asm/machdep.h>
29 #include <asm/ppc-pci.h>
31 #include <asm/iommu.h>
33 #include <asm/abs_addr.h>
34 #include <asm/firmware.h>
40 #define PCI_RESET_DELAY_US 3000000
42 #define cfg_dbg(fmt...) do { } while(0)
43 //#define cfg_dbg(fmt...) printk(fmt)
46 static int pnv_msi_check_device(struct pci_dev
* pdev
, int nvec
, int type
)
48 struct pci_controller
*hose
= pci_bus_to_host(pdev
->bus
);
49 struct pnv_phb
*phb
= hose
->private_data
;
51 return (phb
&& phb
->msi_map
) ? 0 : -ENODEV
;
54 static unsigned int pnv_get_one_msi(struct pnv_phb
*phb
)
59 spin_lock_irqsave(&phb
->lock
, flags
);
61 id
= find_next_zero_bit(phb
->msi_map
, phb
->msi_count
, phb
->msi_next
);
62 if (id
>= phb
->msi_count
&& phb
->msi_next
)
63 id
= find_next_zero_bit(phb
->msi_map
, phb
->msi_count
, 0);
64 if (id
>= phb
->msi_count
) {
68 __set_bit(id
, phb
->msi_map
);
69 rc
= id
+ phb
->msi_base
;
71 spin_unlock_irqrestore(&phb
->lock
, flags
);
75 static void pnv_put_msi(struct pnv_phb
*phb
, unsigned int hwirq
)
80 if (WARN_ON(hwirq
< phb
->msi_base
||
81 hwirq
>= (phb
->msi_base
+ phb
->msi_count
)))
83 id
= hwirq
- phb
->msi_base
;
85 spin_lock_irqsave(&phb
->lock
, flags
);
86 __clear_bit(id
, phb
->msi_map
);
87 spin_unlock_irqrestore(&phb
->lock
, flags
);
90 static int pnv_setup_msi_irqs(struct pci_dev
*pdev
, int nvec
, int type
)
92 struct pci_controller
*hose
= pci_bus_to_host(pdev
->bus
);
93 struct pnv_phb
*phb
= hose
->private_data
;
94 struct msi_desc
*entry
;
96 unsigned int hwirq
, virq
;
102 list_for_each_entry(entry
, &pdev
->msi_list
, list
) {
103 if (!entry
->msi_attrib
.is_64
&& !phb
->msi32_support
) {
104 pr_warn("%s: Supports only 64-bit MSIs\n",
108 hwirq
= pnv_get_one_msi(phb
);
110 pr_warn("%s: Failed to find a free MSI\n",
114 virq
= irq_create_mapping(NULL
, hwirq
);
115 if (virq
== NO_IRQ
) {
116 pr_warn("%s: Failed to map MSI to linux irq\n",
118 pnv_put_msi(phb
, hwirq
);
121 rc
= phb
->msi_setup(phb
, pdev
, hwirq
, entry
->msi_attrib
.is_64
,
124 pr_warn("%s: Failed to setup MSI\n", pci_name(pdev
));
125 irq_dispose_mapping(virq
);
126 pnv_put_msi(phb
, hwirq
);
129 irq_set_msi_desc(virq
, entry
);
130 write_msi_msg(virq
, &msg
);
135 static void pnv_teardown_msi_irqs(struct pci_dev
*pdev
)
137 struct pci_controller
*hose
= pci_bus_to_host(pdev
->bus
);
138 struct pnv_phb
*phb
= hose
->private_data
;
139 struct msi_desc
*entry
;
144 list_for_each_entry(entry
, &pdev
->msi_list
, list
) {
145 if (entry
->irq
== NO_IRQ
)
147 irq_set_msi_desc(entry
->irq
, NULL
);
148 pnv_put_msi(phb
, virq_to_hw(entry
->irq
));
149 irq_dispose_mapping(entry
->irq
);
152 #endif /* CONFIG_PCI_MSI */
154 static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb
*phb
)
156 struct OpalIoP7IOCPhbErrorData
*data
= &phb
->diag
.p7ioc
;
159 pr_info("PHB %d diagnostic data:\n", phb
->hose
->global_number
);
161 pr_info(" brdgCtl = 0x%08x\n", data
->brdgCtl
);
163 pr_info(" portStatusReg = 0x%08x\n", data
->portStatusReg
);
164 pr_info(" rootCmplxStatus = 0x%08x\n", data
->rootCmplxStatus
);
165 pr_info(" busAgentStatus = 0x%08x\n", data
->busAgentStatus
);
167 pr_info(" deviceStatus = 0x%08x\n", data
->deviceStatus
);
168 pr_info(" slotStatus = 0x%08x\n", data
->slotStatus
);
169 pr_info(" linkStatus = 0x%08x\n", data
->linkStatus
);
170 pr_info(" devCmdStatus = 0x%08x\n", data
->devCmdStatus
);
171 pr_info(" devSecStatus = 0x%08x\n", data
->devSecStatus
);
173 pr_info(" rootErrorStatus = 0x%08x\n", data
->rootErrorStatus
);
174 pr_info(" uncorrErrorStatus = 0x%08x\n", data
->uncorrErrorStatus
);
175 pr_info(" corrErrorStatus = 0x%08x\n", data
->corrErrorStatus
);
176 pr_info(" tlpHdr1 = 0x%08x\n", data
->tlpHdr1
);
177 pr_info(" tlpHdr2 = 0x%08x\n", data
->tlpHdr2
);
178 pr_info(" tlpHdr3 = 0x%08x\n", data
->tlpHdr3
);
179 pr_info(" tlpHdr4 = 0x%08x\n", data
->tlpHdr4
);
180 pr_info(" sourceId = 0x%08x\n", data
->sourceId
);
182 pr_info(" errorClass = 0x%016llx\n", data
->errorClass
);
183 pr_info(" correlator = 0x%016llx\n", data
->correlator
);
185 pr_info(" p7iocPlssr = 0x%016llx\n", data
->p7iocPlssr
);
186 pr_info(" p7iocCsr = 0x%016llx\n", data
->p7iocCsr
);
187 pr_info(" lemFir = 0x%016llx\n", data
->lemFir
);
188 pr_info(" lemErrorMask = 0x%016llx\n", data
->lemErrorMask
);
189 pr_info(" lemWOF = 0x%016llx\n", data
->lemWOF
);
190 pr_info(" phbErrorStatus = 0x%016llx\n", data
->phbErrorStatus
);
191 pr_info(" phbFirstErrorStatus = 0x%016llx\n", data
->phbFirstErrorStatus
);
192 pr_info(" phbErrorLog0 = 0x%016llx\n", data
->phbErrorLog0
);
193 pr_info(" phbErrorLog1 = 0x%016llx\n", data
->phbErrorLog1
);
194 pr_info(" mmioErrorStatus = 0x%016llx\n", data
->mmioErrorStatus
);
195 pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data
->mmioFirstErrorStatus
);
196 pr_info(" mmioErrorLog0 = 0x%016llx\n", data
->mmioErrorLog0
);
197 pr_info(" mmioErrorLog1 = 0x%016llx\n", data
->mmioErrorLog1
);
198 pr_info(" dma0ErrorStatus = 0x%016llx\n", data
->dma0ErrorStatus
);
199 pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data
->dma0FirstErrorStatus
);
200 pr_info(" dma0ErrorLog0 = 0x%016llx\n", data
->dma0ErrorLog0
);
201 pr_info(" dma0ErrorLog1 = 0x%016llx\n", data
->dma0ErrorLog1
);
202 pr_info(" dma1ErrorStatus = 0x%016llx\n", data
->dma1ErrorStatus
);
203 pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data
->dma1FirstErrorStatus
);
204 pr_info(" dma1ErrorLog0 = 0x%016llx\n", data
->dma1ErrorLog0
);
205 pr_info(" dma1ErrorLog1 = 0x%016llx\n", data
->dma1ErrorLog1
);
207 for (i
= 0; i
< OPAL_P7IOC_NUM_PEST_REGS
; i
++) {
208 if ((data
->pestA
[i
] >> 63) == 0 &&
209 (data
->pestB
[i
] >> 63) == 0)
211 pr_info(" PE[%3d] PESTA = 0x%016llx\n", i
, data
->pestA
[i
]);
212 pr_info(" PESTB = 0x%016llx\n", data
->pestB
[i
]);
216 static void pnv_pci_dump_phb_diag_data(struct pnv_phb
*phb
)
219 case PNV_PHB_MODEL_P7IOC
:
220 pnv_pci_dump_p7ioc_diag_data(phb
);
223 pr_warning("PCI %d: Can't decode this PHB diag data\n",
224 phb
->hose
->global_number
);
228 static void pnv_pci_handle_eeh_config(struct pnv_phb
*phb
, u32 pe_no
)
230 unsigned long flags
, rc
;
233 spin_lock_irqsave(&phb
->lock
, flags
);
235 rc
= opal_pci_get_phb_diag_data(phb
->opal_id
, phb
->diag
.blob
, PNV_PCI_DIAG_BUF_SIZE
);
236 has_diag
= (rc
== OPAL_SUCCESS
);
238 rc
= opal_pci_eeh_freeze_clear(phb
->opal_id
, pe_no
,
239 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL
);
241 pr_warning("PCI %d: Failed to clear EEH freeze state"
242 " for PE#%d, err %ld\n",
243 phb
->hose
->global_number
, pe_no
, rc
);
245 /* For now, let's only display the diag buffer when we fail to clear
246 * the EEH status. We'll do more sensible things later when we have
247 * proper EEH support. We need to make sure we don't pollute ourselves
248 * with the normal errors generated when probing empty slots
251 pnv_pci_dump_phb_diag_data(phb
);
253 pr_warning("PCI %d: No diag data available\n",
254 phb
->hose
->global_number
);
257 spin_unlock_irqrestore(&phb
->lock
, flags
);
260 static void pnv_pci_config_check_eeh(struct pnv_phb
*phb
, struct pci_bus
*bus
,
268 /* Get PE# if we support IODA */
269 pe_no
= phb
->bdfn_to_pe
? phb
->bdfn_to_pe(phb
, bus
, bdfn
& 0xff) : 0;
271 /* Read freeze status */
272 rc
= opal_pci_eeh_freeze_status(phb
->opal_id
, pe_no
, &fstate
, &pcierr
,
275 pr_warning("PCI %d: Failed to read EEH status for PE#%d,"
276 " err %lld\n", phb
->hose
->global_number
, pe_no
, rc
);
279 cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
280 bdfn
, pe_no
, fstate
);
282 pnv_pci_handle_eeh_config(phb
, pe_no
);
285 static int pnv_pci_read_config(struct pci_bus
*bus
,
287 int where
, int size
, u32
*val
)
289 struct pci_controller
*hose
= pci_bus_to_host(bus
);
290 struct pnv_phb
*phb
= hose
->private_data
;
291 u32 bdfn
= (((uint64_t)bus
->number
) << 8) | devfn
;
295 return PCIBIOS_DEVICE_NOT_FOUND
;
300 rc
= opal_pci_config_read_byte(phb
->opal_id
, bdfn
, where
, &v8
);
301 *val
= (rc
== OPAL_SUCCESS
) ? v8
: 0xff;
306 rc
= opal_pci_config_read_half_word(phb
->opal_id
, bdfn
, where
,
308 *val
= (rc
== OPAL_SUCCESS
) ? v16
: 0xffff;
313 rc
= opal_pci_config_read_word(phb
->opal_id
, bdfn
, where
, &v32
);
314 *val
= (rc
== OPAL_SUCCESS
) ? v32
: 0xffffffff;
318 return PCIBIOS_FUNC_NOT_SUPPORTED
;
320 cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n",
321 bus
->number
, devfn
, where
, size
, *val
);
323 /* Check if the PHB got frozen due to an error (no response) */
324 pnv_pci_config_check_eeh(phb
, bus
, bdfn
);
326 return PCIBIOS_SUCCESSFUL
;
329 static int pnv_pci_write_config(struct pci_bus
*bus
,
331 int where
, int size
, u32 val
)
333 struct pci_controller
*hose
= pci_bus_to_host(bus
);
334 struct pnv_phb
*phb
= hose
->private_data
;
335 u32 bdfn
= (((uint64_t)bus
->number
) << 8) | devfn
;
338 return PCIBIOS_DEVICE_NOT_FOUND
;
340 cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n",
341 bus
->number
, devfn
, where
, size
, val
);
344 opal_pci_config_write_byte(phb
->opal_id
, bdfn
, where
, val
);
347 opal_pci_config_write_half_word(phb
->opal_id
, bdfn
, where
, val
);
350 opal_pci_config_write_word(phb
->opal_id
, bdfn
, where
, val
);
353 return PCIBIOS_FUNC_NOT_SUPPORTED
;
355 /* Check if the PHB got frozen due to an error (no response) */
356 pnv_pci_config_check_eeh(phb
, bus
, bdfn
);
358 return PCIBIOS_SUCCESSFUL
;
361 struct pci_ops pnv_pci_ops
= {
362 .read
= pnv_pci_read_config
,
363 .write
= pnv_pci_write_config
,
367 static void pnv_tce_invalidate(struct iommu_table
*tbl
,
368 u64
*startp
, u64
*endp
)
370 u64 __iomem
*invalidate
= (u64 __iomem
*)tbl
->it_index
;
371 unsigned long start
, end
, inc
;
373 start
= __pa(startp
);
377 /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
382 start
|= tbl
->it_busno
;
383 end
|= tbl
->it_busno
;
385 /* p7ioc-style invalidation, 2 TCEs per write */
386 else if (tbl
->it_type
& TCE_PCI_SWINV_PAIR
) {
387 start
|= (1ull << 63);
391 /* Default (older HW) */
395 end
|= inc
- 1; /* round up end to be different than start */
397 mb(); /* Ensure above stores are visible */
398 while (start
<= end
) {
399 __raw_writeq(start
, invalidate
);
402 /* The iommu layer will do another mb() for us on build() and
403 * we don't care on free()
408 static int pnv_tce_build(struct iommu_table
*tbl
, long index
, long npages
,
409 unsigned long uaddr
, enum dma_data_direction direction
,
410 struct dma_attrs
*attrs
)
416 proto_tce
= TCE_PCI_READ
; // Read allowed
418 if (direction
!= DMA_TO_DEVICE
)
419 proto_tce
|= TCE_PCI_WRITE
;
421 tces
= tcep
= ((u64
*)tbl
->it_base
) + index
- tbl
->it_offset
;
422 rpn
= __pa(uaddr
) >> TCE_SHIFT
;
425 *(tcep
++) = proto_tce
| (rpn
++ << TCE_RPN_SHIFT
);
427 /* Some implementations won't cache invalid TCEs and thus may not
428 * need that flush. We'll probably turn it_type into a bit mask
429 * of flags if that becomes the case
431 if (tbl
->it_type
& TCE_PCI_SWINV_CREATE
)
432 pnv_tce_invalidate(tbl
, tces
, tcep
- 1);
437 static void pnv_tce_free(struct iommu_table
*tbl
, long index
, long npages
)
441 tces
= tcep
= ((u64
*)tbl
->it_base
) + index
- tbl
->it_offset
;
446 if (tbl
->it_type
& TCE_PCI_SWINV_FREE
)
447 pnv_tce_invalidate(tbl
, tces
, tcep
- 1);
450 void pnv_pci_setup_iommu_table(struct iommu_table
*tbl
,
451 void *tce_mem
, u64 tce_size
,
454 tbl
->it_blocksize
= 16;
455 tbl
->it_base
= (unsigned long)tce_mem
;
456 tbl
->it_offset
= dma_offset
>> IOMMU_PAGE_SHIFT
;
458 tbl
->it_size
= tce_size
>> 3;
460 tbl
->it_type
= TCE_PCI
;
463 static struct iommu_table
* __devinit
464 pnv_pci_setup_bml_iommu(struct pci_controller
*hose
)
466 struct iommu_table
*tbl
;
467 const __be64
*basep
, *swinvp
;
470 basep
= of_get_property(hose
->dn
, "linux,tce-base", NULL
);
471 sizep
= of_get_property(hose
->dn
, "linux,tce-size", NULL
);
472 if (basep
== NULL
|| sizep
== NULL
) {
473 pr_err("PCI: %s has missing tce entries !\n",
474 hose
->dn
->full_name
);
477 tbl
= kzalloc_node(sizeof(struct iommu_table
), GFP_KERNEL
, hose
->node
);
480 pnv_pci_setup_iommu_table(tbl
, __va(be64_to_cpup(basep
)),
481 be32_to_cpup(sizep
), 0);
482 iommu_init_table(tbl
, hose
->node
);
484 /* Deal with SW invalidated TCEs when needed (BML way) */
485 swinvp
= of_get_property(hose
->dn
, "linux,tce-sw-invalidate-info",
488 tbl
->it_busno
= swinvp
[1];
489 tbl
->it_index
= (unsigned long)ioremap(swinvp
[0], 8);
490 tbl
->it_type
= TCE_PCI_SWINV_CREATE
| TCE_PCI_SWINV_FREE
;
495 static void __devinit
pnv_pci_dma_fallback_setup(struct pci_controller
*hose
,
496 struct pci_dev
*pdev
)
498 struct device_node
*np
= pci_bus_to_OF_node(hose
->bus
);
504 if (!pdn
->iommu_table
)
505 pdn
->iommu_table
= pnv_pci_setup_bml_iommu(hose
);
506 if (!pdn
->iommu_table
)
508 set_iommu_table_base(&pdev
->dev
, pdn
->iommu_table
);
511 static void __devinit
pnv_pci_dma_dev_setup(struct pci_dev
*pdev
)
513 struct pci_controller
*hose
= pci_bus_to_host(pdev
->bus
);
514 struct pnv_phb
*phb
= hose
->private_data
;
516 /* If we have no phb structure, try to setup a fallback based on
517 * the device-tree (RTAS PCI for example)
519 if (phb
&& phb
->dma_dev_setup
)
520 phb
->dma_dev_setup(phb
, pdev
);
522 pnv_pci_dma_fallback_setup(hose
, pdev
);
525 /* Fixup wrong class code in p7ioc root complex */
526 static void __devinit
pnv_p7ioc_rc_quirk(struct pci_dev
*dev
)
528 dev
->class = PCI_CLASS_BRIDGE_PCI
<< 8;
530 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM
, 0x3b9, pnv_p7ioc_rc_quirk
);
532 static int pnv_pci_probe_mode(struct pci_bus
*bus
)
534 struct pci_controller
*hose
= pci_bus_to_host(bus
);
535 const __be64
*tstamp
;
539 /* We hijack this as a way to ensure we have waited long
540 * enough since the reset was lifted on the PCI bus
542 if (bus
!= hose
->bus
)
543 return PCI_PROBE_NORMAL
;
544 tstamp
= of_get_property(hose
->dn
, "reset-clear-timestamp", NULL
);
545 if (!tstamp
|| !*tstamp
)
546 return PCI_PROBE_NORMAL
;
548 now
= mftb() / tb_ticks_per_usec
;
549 target
= (be64_to_cpup(tstamp
) / tb_ticks_per_usec
)
550 + PCI_RESET_DELAY_US
;
552 pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
553 hose
->global_number
, target
, now
);
556 msleep((target
- now
+ 999) / 1000);
558 return PCI_PROBE_NORMAL
;
561 void __init
pnv_pci_init(void)
563 struct device_node
*np
;
565 pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN
);
567 /* OPAL absent, try POPAL first then RTAS detection of PHBs */
568 if (!firmware_has_feature(FW_FEATURE_OPAL
)) {
569 #ifdef CONFIG_PPC_POWERNV_RTAS
570 init_pci_config_tokens();
571 find_and_init_phbs();
572 #endif /* CONFIG_PPC_POWERNV_RTAS */
574 /* OPAL is here, do our normal stuff */
578 /* Look for IODA IO-Hubs. We don't support mixing IODA
579 * and p5ioc2 due to the need to change some global
582 for_each_compatible_node(np
, NULL
, "ibm,ioda-hub") {
583 pnv_pci_init_ioda_hub(np
);
587 /* Look for p5ioc2 IO-Hubs */
589 for_each_compatible_node(np
, NULL
, "ibm,p5ioc2")
590 pnv_pci_init_p5ioc2_hub(np
);
593 /* Setup the linkage between OF nodes and PHBs */
596 /* Configure IOMMU DMA hooks */
597 ppc_md
.pci_dma_dev_setup
= pnv_pci_dma_dev_setup
;
598 ppc_md
.tce_build
= pnv_tce_build
;
599 ppc_md
.tce_free
= pnv_tce_free
;
600 ppc_md
.pci_probe_mode
= pnv_pci_probe_mode
;
601 set_pci_dma_ops(&dma_iommu_ops
);
604 #ifdef CONFIG_PCI_MSI
605 ppc_md
.msi_check_device
= pnv_msi_check_device
;
606 ppc_md
.setup_msi_irqs
= pnv_setup_msi_irqs
;
607 ppc_md
.teardown_msi_irqs
= pnv_teardown_msi_irqs
;