4 * Copyright (C) 2014 Broadcom Corporation
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/etherdevice.h>
13 #include <linux/list.h>
14 #include <linux/slab.h>
17 /* This tag length is 4 bytes, older ones were 6 bytes, we do not
20 #define BRCM_TAG_LEN 4
22 /* Tag is constructed and desconstructed using byte by byte access
23 * because the tag is placed after the MAC Source Address, which does
24 * not make it 4-bytes aligned, so this might cause unaligned accesses
25 * on most systems where this is used.
28 /* Ingress and egress opcodes */
29 #define BRCM_OPCODE_SHIFT 5
30 #define BRCM_OPCODE_MASK 0x7
33 /* 1st byte in the tag */
34 #define BRCM_IG_TC_SHIFT 2
35 #define BRCM_IG_TC_MASK 0x7
36 /* 2nd byte in the tag */
37 #define BRCM_IG_TE_MASK 0x3
38 #define BRCM_IG_TS_SHIFT 7
39 /* 3rd byte in the tag */
40 #define BRCM_IG_DSTMAP2_MASK 1
41 #define BRCM_IG_DSTMAP1_MASK 0xff
45 /* 2nd byte in the tag */
46 #define BRCM_EG_CID_MASK 0xff
48 /* 3rd byte in the tag */
49 #define BRCM_EG_RC_MASK 0xff
50 #define BRCM_EG_RC_RSVD (3 << 6)
51 #define BRCM_EG_RC_EXCEPTION (1 << 5)
52 #define BRCM_EG_RC_PROT_SNOOP (1 << 4)
53 #define BRCM_EG_RC_PROT_TERM (1 << 3)
54 #define BRCM_EG_RC_SWITCH (1 << 2)
55 #define BRCM_EG_RC_MAC_LEARN (1 << 1)
56 #define BRCM_EG_RC_MIRROR (1 << 0)
57 #define BRCM_EG_TC_SHIFT 5
58 #define BRCM_EG_TC_MASK 0x7
59 #define BRCM_EG_PID_MASK 0x1f
61 static struct sk_buff
*brcm_tag_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
63 struct dsa_slave_priv
*p
= netdev_priv(dev
);
66 if (skb_cow_head(skb
, BRCM_TAG_LEN
) < 0)
69 skb_push(skb
, BRCM_TAG_LEN
);
71 memmove(skb
->data
, skb
->data
+ BRCM_TAG_LEN
, 2 * ETH_ALEN
);
73 /* Build the tag after the MAC Source Address */
74 brcm_tag
= skb
->data
+ 2 * ETH_ALEN
;
76 /* Set the ingress opcode, traffic class, tag enforcment is
79 brcm_tag
[0] = (1 << BRCM_OPCODE_SHIFT
) |
80 ((skb
->priority
<< BRCM_IG_TC_SHIFT
) & BRCM_IG_TC_MASK
);
84 brcm_tag
[2] = BRCM_IG_DSTMAP2_MASK
;
85 brcm_tag
[3] = (1 << p
->port
) & BRCM_IG_DSTMAP1_MASK
;
94 static int brcm_tag_rcv(struct sk_buff
*skb
, struct net_device
*dev
,
95 struct packet_type
*pt
, struct net_device
*orig_dev
)
97 struct dsa_switch_tree
*dst
= dev
->dsa_ptr
;
98 struct dsa_switch
*ds
;
102 if (unlikely(dst
== NULL
))
107 skb
= skb_unshare(skb
, GFP_ATOMIC
);
111 if (unlikely(!pskb_may_pull(skb
, BRCM_TAG_LEN
)))
114 /* skb->data points to the EtherType, the tag is right before it */
115 brcm_tag
= skb
->data
- 2;
117 /* The opcode should never be different than 0b000 */
118 if (unlikely((brcm_tag
[0] >> BRCM_OPCODE_SHIFT
) & BRCM_OPCODE_MASK
))
121 /* We should never see a reserved reason code without knowing how to
124 WARN_ON(brcm_tag
[2] & BRCM_EG_RC_RSVD
);
126 /* Locate which port this is coming from */
127 source_port
= brcm_tag
[3] & BRCM_EG_PID_MASK
;
129 /* Validate port against switch setup, either the port is totally */
130 if (source_port
>= DSA_MAX_PORTS
|| ds
->ports
[source_port
] == NULL
)
133 /* Remove Broadcom tag and update checksum */
134 skb_pull_rcsum(skb
, BRCM_TAG_LEN
);
136 /* Move the Ethernet DA and SA */
137 memmove(skb
->data
- ETH_HLEN
,
138 skb
->data
- ETH_HLEN
- BRCM_TAG_LEN
,
141 skb_push(skb
, ETH_HLEN
);
142 skb
->pkt_type
= PACKET_HOST
;
143 skb
->dev
= ds
->ports
[source_port
];
144 skb
->protocol
= eth_type_trans(skb
, skb
->dev
);
146 skb
->dev
->stats
.rx_packets
++;
147 skb
->dev
->stats
.rx_bytes
+= skb
->len
;
149 netif_receive_skb(skb
);
159 const struct dsa_device_ops brcm_netdev_ops
= {
160 .xmit
= brcm_tag_xmit
,