arch/x86/include/asm/olpc.h

   1 /* OLPC machine specific definitions */
   2
   3 #ifndef _ASM_X86_OLPC_H
   4 #define _ASM_X86_OLPC_H
   5
   6 #include <asm/geode.h>
   7
   8 struct olpc_platform_t {
   9         int flags;
  10         uint32_t boardrev;
  11         int ecver;
  12 };
  13
  14 #define OLPC_F_PRESENT          0x01
  15 #define OLPC_F_DCON             0x02
  16 #define OLPC_F_EC_WIDE_SCI      0x04
  17
  18 #ifdef CONFIG_OLPC
  19
  20 extern struct olpc_platform_t olpc_platform_info;
  21
  22 /*
  23  * OLPC board IDs contain the major build number within the mask 0x0ff0,
  24  * and the minor build number within 0x000f.  Pre-builds have a minor
  25  * number less than 8, and normal builds start at 8.  For example, 0x0B10
  26  * is a PreB1, and 0x0C18 is a C1.
  27  */
  28
  29 static inline uint32_t olpc_board(uint8_t id)
  30 {
  31         return (id << 4) | 0x8;
  32 }
  33
  34 static inline uint32_t olpc_board_pre(uint8_t id)
  35 {
  36         return id << 4;
  37 }
  38
  39 static inline int machine_is_olpc(void)
  40 {
  41         return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
  42 }
  43
  44 /*
  45  * The DCON is OLPC's Display Controller.  It has a number of unique
  46  * features that we might want to take advantage of..
  47  */
  48 static inline int olpc_has_dcon(void)
  49 {
  50         return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
  51 }
  52
  53 /*
  54  * The "Mass Production" version of OLPC's XO is identified as being model
  55  * C2.  During the prototype phase, the following models (in chronological
  56  * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
  57  * were based on Geode GX CPUs, and models after that were based upon
  58  * Geode LX CPUs.  There were also some hand-assembled models floating
  59  * around, referred to as PreB1, PreB2, etc.
  60  */
  61 static inline int olpc_board_at_least(uint32_t rev)
  62 {
  63         return olpc_platform_info.boardrev >= rev;
  64 }
  65
  66 extern void olpc_ec_wakeup_set(u16 value);
  67 extern void olpc_ec_wakeup_clear(u16 value);
  68 extern bool olpc_ec_wakeup_available(void);
  69
  70 extern int olpc_ec_mask_write(u16 bits);
  71 extern int olpc_ec_sci_query(u16 *sci_value);
  72
  73 #else
  74
  75 static inline int machine_is_olpc(void)
  76 {
  77         return 0;
  78 }
  79
  80 static inline int olpc_has_dcon(void)
  81 {
  82         return 0;
  83 }
  84
  85 static inline void olpc_ec_wakeup_set(u16 value) { }
  86 static inline void olpc_ec_wakeup_clear(u16 value) { }
  87
  88 static inline bool olpc_ec_wakeup_available(void)
  89 {
  90         return false;
  91 }
  92
  93 #endif
  94
  95 #ifdef CONFIG_OLPC_XO1_PM
  96 extern void do_olpc_suspend_lowlevel(void);
  97 extern void olpc_xo1_pm_wakeup_set(u16 value);
  98 extern void olpc_xo1_pm_wakeup_clear(u16 value);
  99 #endif
 100
 101 extern int pci_olpc_init(void);
 102
 103 /* SCI source values */
 104
 105 #define EC_SCI_SRC_EMPTY        0x00
 106 #define EC_SCI_SRC_GAME         0x01
 107 #define EC_SCI_SRC_BATTERY      0x02
 108 #define EC_SCI_SRC_BATSOC       0x04
 109 #define EC_SCI_SRC_BATERR       0x08
 110 #define EC_SCI_SRC_EBOOK        0x10    /* XO-1 only */
 111 #define EC_SCI_SRC_WLAN         0x20    /* XO-1 only */
 112 #define EC_SCI_SRC_ACPWR        0x40
 113 #define EC_SCI_SRC_BATCRIT      0x80
 114 #define EC_SCI_SRC_GPWAKE       0x100   /* XO-1.5 only */
 115 #define EC_SCI_SRC_ALL          0x1FF
 116
 117 /* GPIO assignments */
 118
 119 #define OLPC_GPIO_MIC_AC        1
 120 #define OLPC_GPIO_DCON_STAT0    5
 121 #define OLPC_GPIO_DCON_STAT1    6
 122 #define OLPC_GPIO_DCON_IRQ      7
 123 #define OLPC_GPIO_THRM_ALRM     geode_gpio(10)
 124 #define OLPC_GPIO_DCON_LOAD    11
 125 #define OLPC_GPIO_DCON_BLANK   12
 126 #define OLPC_GPIO_SMB_CLK      14
 127 #define OLPC_GPIO_SMB_DATA     15
 128 #define OLPC_GPIO_WORKAUX       geode_gpio(24)
 129 #define OLPC_GPIO_LID           26
 130 #define OLPC_GPIO_ECSCI         27
 131
 132 #endif /* _ASM_X86_OLPC_H */