drivers/usb/input/keyspan_remote.c

   1 /*
   2  * keyspan_remote: USB driver for the Keyspan DMR
   3  *
   4  * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License as
   8  *      published by the Free Software Foundation, version 2.
   9  *
  10  * This driver has been put together with the support of Innosys, Inc.
  11  * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
  12  */
  13
  14 #include <linux/config.h>
  15 #include <linux/kernel.h>
  16 #include <linux/errno.h>
  17 #include <linux/init.h>
  18 #include <linux/slab.h>
  19 #include <linux/module.h>
  20 #include <linux/moduleparam.h>
  21 #include <linux/input.h>
  22 #include <linux/usb.h>
  23 #include <linux/usb_input.h>
  24
  25 #define DRIVER_VERSION  "v0.1"
  26 #define DRIVER_AUTHOR   "Michael Downey <downey@zymeta.com>"
  27 #define DRIVER_DESC     "Driver for the USB Keyspan remote control."
  28 #define DRIVER_LICENSE  "GPL"
  29
  30 /* Parameters that can be passed to the driver. */
  31 static int debug;
  32 module_param(debug, int, 0444);
  33 MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
  34
  35 /* Vendor and product ids */
  36 #define USB_KEYSPAN_VENDOR_ID           0x06CD
  37 #define USB_KEYSPAN_PRODUCT_UIA11       0x0202
  38
  39 /* Defines for converting the data from the remote. */
  40 #define ZERO            0x18
  41 #define ZERO_MASK       0x1F    /* 5 bits for a 0 */
  42 #define ONE             0x3C
  43 #define ONE_MASK        0x3F    /* 6 bits for a 1 */
  44 #define SYNC            0x3F80
  45 #define SYNC_MASK       0x3FFF  /* 14 bits for a SYNC sequence */
  46 #define STOP            0x00
  47 #define STOP_MASK       0x1F    /* 5 bits for the STOP sequence */
  48 #define GAP             0xFF
  49
  50 #define RECV_SIZE       8       /* The UIA-11 type have a 8 byte limit. */
  51
  52 /* table of devices that work with this driver */
  53 static struct usb_device_id keyspan_table[] = {
  54         { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
  55         { }                                     /* Terminating entry */
  56 };
  57
  58 /* Structure to store all the real stuff that a remote sends to us. */
  59 struct keyspan_message {
  60         u16     system;
  61         u8      button;
  62         u8      toggle;
  63 };
  64
  65 /* Structure used for all the bit testing magic needed to be done. */
  66 struct bit_tester {
  67         u32     tester;
  68         int     len;
  69         int     pos;
  70         int     bits_left;
  71         u8      buffer[32];
  72 };
  73
  74 /* Structure to hold all of our driver specific stuff */
  75 struct usb_keyspan {
  76         char                            name[128];
  77         char                            phys[64];
  78         struct usb_device*              udev;
  79         struct input_dev                *input;
  80         struct usb_interface*           interface;
  81         struct usb_endpoint_descriptor* in_endpoint;
  82         struct urb*                     irq_urb;
  83         int                             open;
  84         dma_addr_t                      in_dma;
  85         unsigned char*                  in_buffer;
  86
  87         /* variables used to parse messages from remote. */
  88         struct bit_tester               data;
  89         int                             stage;
  90         int                             toggle;
  91 };
  92
  93 /*
  94  * Table that maps the 31 possible keycodes to input keys.
  95  * Currently there are 15 and 17 button models so RESERVED codes
  96  * are blank areas in the mapping.
  97  */
  98 static const int keyspan_key_table[] = {
  99         KEY_RESERVED,           /* 0 is just a place holder. */
 100         KEY_RESERVED,
 101         KEY_STOP,
 102         KEY_PLAYCD,
 103         KEY_RESERVED,
 104         KEY_PREVIOUSSONG,
 105         KEY_REWIND,
 106         KEY_FORWARD,
 107         KEY_NEXTSONG,
 108         KEY_RESERVED,
 109         KEY_RESERVED,
 110         KEY_RESERVED,
 111         KEY_PAUSE,
 112         KEY_VOLUMEUP,
 113         KEY_RESERVED,
 114         KEY_RESERVED,
 115         KEY_RESERVED,
 116         KEY_VOLUMEDOWN,
 117         KEY_RESERVED,
 118         KEY_UP,
 119         KEY_RESERVED,
 120         KEY_MUTE,
 121         KEY_LEFT,
 122         KEY_ENTER,
 123         KEY_RIGHT,
 124         KEY_RESERVED,
 125         KEY_RESERVED,
 126         KEY_DOWN,
 127         KEY_RESERVED,
 128         KEY_KPASTERISK,
 129         KEY_RESERVED,
 130         KEY_MENU
 131 };
 132
 133 static struct usb_driver keyspan_driver;
 134
 135 /*
 136  * Debug routine that prints out what we've received from the remote.
 137  */
 138 static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
 139 {
 140         char codes[4 * RECV_SIZE];
 141         int i;
 142
 143         for (i = 0; i < RECV_SIZE; i++)
 144                 snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
 145
 146         dev_info(&dev->udev->dev, "%s\n", codes);
 147 }
 148
 149 /*
 150  * Routine that manages the bit_tester structure.  It makes sure that there are
 151  * at least bits_needed bits loaded into the tester.
 152  */
 153 static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
 154 {
 155         if (dev->data.bits_left >= bits_needed)
 156                 return 0;
 157
 158         /*
 159          * Somehow we've missed the last message. The message will be repeated
 160          * though so it's not too big a deal
 161          */
 162         if (dev->data.pos >= dev->data.len) {
 163                 dev_dbg(&dev->udev->dev,
 164                         "%s - Error ran out of data. pos: %d, len: %d\n",
 165                         __FUNCTION__, dev->data.pos, dev->data.len);
 166                 return -1;
 167         }
 168
 169         /* Load as much as we can into the tester. */
 170         while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
 171                (dev->data.pos < dev->data.len)) {
 172                 dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
 173                 dev->data.bits_left += 8;
 174         }
 175
 176         return 0;
 177 }
 178
 179 /*
 180  * Routine that handles all the logic needed to parse out the message from the remote.
 181  */
 182 static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)
 183 {
 184         int i;
 185         int found = 0;
 186         struct keyspan_message message;
 187
 188         switch(remote->stage) {
 189         case 0:
 190                 /*
 191                  * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
 192                  * So the first byte that isn't a FF should be the start of a new message.
 193                  */
 194                 for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
 195
 196                 if (i < RECV_SIZE) {
 197                         memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
 198                         remote->data.len = RECV_SIZE;
 199                         remote->data.pos = 0;
 200                         remote->data.tester = 0;
 201                         remote->data.bits_left = 0;
 202                         remote->stage = 1;
 203                 }
 204                 break;
 205
 206         case 1:
 207                 /*
 208                  * Stage 1 we should have 16 bytes and should be able to detect a
 209                  * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
 210                  */
 211                 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 212                 remote->data.len += RECV_SIZE;
 213
 214                 found = 0;
 215                 while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
 216                         for (i = 0; i < 8; ++i) {
 217                                 if (keyspan_load_tester(remote, 14) != 0) {
 218                                         remote->stage = 0;
 219                                         return;
 220                                 }
 221
 222                                 if ((remote->data.tester & SYNC_MASK) == SYNC) {
 223                                         remote->data.tester = remote->data.tester >> 14;
 224                                         remote->data.bits_left -= 14;
 225                                         found = 1;
 226                                         break;
 227                                 } else {
 228                                         remote->data.tester = remote->data.tester >> 1;
 229                                         --remote->data.bits_left;
 230                                 }
 231                         }
 232                 }
 233
 234                 if (!found) {
 235                         remote->stage = 0;
 236                         remote->data.len = 0;
 237                 } else {
 238                         remote->stage = 2;
 239                 }
 240                 break;
 241
 242         case 2:
 243                 /*
 244                  * Stage 2 we should have 24 bytes which will be enough for a full
 245                  * message.  We need to parse out the system code, button code,
 246                  * toggle code, and stop.
 247                  */
 248                 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 249                 remote->data.len += RECV_SIZE;
 250
 251                 message.system = 0;
 252                 for (i = 0; i < 9; i++) {
 253                         keyspan_load_tester(remote, 6);
 254
 255                         if ((remote->data.tester & ZERO_MASK) == ZERO) {
 256                                 message.system = message.system << 1;
 257                                 remote->data.tester = remote->data.tester >> 5;
 258                                 remote->data.bits_left -= 5;
 259                         } else if ((remote->data.tester & ONE_MASK) == ONE) {
 260                                 message.system = (message.system << 1) + 1;
 261                                 remote->data.tester = remote->data.tester >> 6;
 262                                 remote->data.bits_left -= 6;
 263                         } else {
 264                                 err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
 265                                 remote->stage = 0;
 266                                 return;
 267                         }
 268                 }
 269
 270                 message.button = 0;
 271                 for (i = 0; i < 5; i++) {
 272                         keyspan_load_tester(remote, 6);
 273
 274                         if ((remote->data.tester & ZERO_MASK) == ZERO) {
 275                                 message.button = message.button << 1;
 276                                 remote->data.tester = remote->data.tester >> 5;
 277                                 remote->data.bits_left -= 5;
 278                         } else if ((remote->data.tester & ONE_MASK) == ONE) {
 279                                 message.button = (message.button << 1) + 1;
 280                                 remote->data.tester = remote->data.tester >> 6;
 281                                 remote->data.bits_left -= 6;
 282                         } else {
 283                                 err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
 284                                 remote->stage = 0;
 285                                 return;
 286                         }
 287                 }
 288
 289                 keyspan_load_tester(remote, 6);
 290                 if ((remote->data.tester & ZERO_MASK) == ZERO) {
 291                         message.toggle = 0;
 292                         remote->data.tester = remote->data.tester >> 5;
 293                         remote->data.bits_left -= 5;
 294                 } else if ((remote->data.tester & ONE_MASK) == ONE) {
 295                         message.toggle = 1;
 296                         remote->data.tester = remote->data.tester >> 6;
 297                         remote->data.bits_left -= 6;
 298                 } else {
 299                         err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
 300                 }
 301
 302                 keyspan_load_tester(remote, 5);
 303                 if ((remote->data.tester & STOP_MASK) == STOP) {
 304                         remote->data.tester = remote->data.tester >> 5;
 305                         remote->data.bits_left -= 5;
 306                 } else {
 307                         err("Bad message recieved, no stop bit found.\n");
 308                 }
 309
 310                 dev_dbg(&remote->udev->dev,
 311                         "%s found valid message: system: %d, button: %d, toggle: %d\n",
 312                         __FUNCTION__, message.system, message.button, message.toggle);
 313
 314                 if (message.toggle != remote->toggle) {
 315                         input_regs(remote->input, regs);
 316                         input_report_key(remote->input, keyspan_key_table[message.button], 1);
 317                         input_report_key(remote->input, keyspan_key_table[message.button], 0);
 318                         input_sync(remote->input);
 319                         remote->toggle = message.toggle;
 320                 }
 321
 322                 remote->stage = 0;
 323                 break;
 324         }
 325 }
 326
 327 /*
 328  * Routine for sending all the initialization messages to the remote.
 329  */
 330 static int keyspan_setup(struct usb_device* dev)
 331 {
 332         int retval = 0;
 333
 334         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 335                                  0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
 336         if (retval) {
 337                 dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
 338                         __FUNCTION__, retval);
 339                 return(retval);
 340         }
 341
 342         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 343                                  0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
 344         if (retval) {
 345                 dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
 346                         __FUNCTION__, retval);
 347                 return(retval);
 348         }
 349
 350         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 351                                  0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
 352         if (retval) {
 353                 dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
 354                         __FUNCTION__, retval);
 355                 return(retval);
 356         }
 357
 358         dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
 359         return(retval);
 360 }
 361
 362 /*
 363  * Routine used to handle a new message that has come in.
 364  */
 365 static void keyspan_irq_recv(struct urb *urb, struct pt_regs *regs)
 366 {
 367         struct usb_keyspan *dev = urb->context;
 368         int retval;
 369
 370         /* Check our status in case we need to bail out early. */
 371         switch (urb->status) {
 372         case 0:
 373                 break;
 374
 375         /* Device went away so don't keep trying to read from it. */
 376         case -ECONNRESET:
 377         case -ENOENT:
 378         case -ESHUTDOWN:
 379                 return;
 380
 381         default:
 382                 goto resubmit;
 383                 break;
 384         }
 385
 386         if (debug)
 387                 keyspan_print(dev);
 388
 389         keyspan_check_data(dev, regs);
 390
 391 resubmit:
 392         retval = usb_submit_urb(urb, GFP_ATOMIC);
 393         if (retval)
 394                 err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
 395 }
 396
 397 static int keyspan_open(struct input_dev *dev)
 398 {
 399         struct usb_keyspan *remote = dev->private;
 400
 401         remote->irq_urb->dev = remote->udev;
 402         if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
 403                 return -EIO;
 404
 405         return 0;
 406 }
 407
 408 static void keyspan_close(struct input_dev *dev)
 409 {
 410         struct usb_keyspan *remote = dev->private;
 411
 412         usb_kill_urb(remote->irq_urb);
 413 }
 414
 415 static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
 416 {
 417
 418         struct usb_endpoint_descriptor *endpoint;
 419         int i;
 420
 421         for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
 422                 endpoint = &iface->endpoint[i].desc;
 423
 424                 if ((endpoint->bEndpointAddress & USB_DIR_IN) &&
 425                     ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
 426                         /* we found our interrupt in endpoint */
 427                         return endpoint;
 428                 }
 429         }
 430
 431         return NULL;
 432 }
 433
 434 /*
 435  * Routine that sets up the driver to handle a specific USB device detected on the bus.
 436  */
 437 static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
 438 {
 439         struct usb_device *udev = interface_to_usbdev(interface);
 440         struct usb_endpoint_descriptor *endpoint;
 441         struct usb_keyspan *remote;
 442         struct input_dev *input_dev;
 443         int i, retval;
 444
 445         endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
 446         if (!endpoint)
 447                 return -ENODEV;
 448
 449         remote = kzalloc(sizeof(*remote), GFP_KERNEL);
 450         input_dev = input_allocate_device();
 451         if (!remote || !input_dev) {
 452                 retval = -ENOMEM;
 453                 goto fail1;
 454         }
 455
 456         remote->udev = udev;
 457         remote->input = input_dev;
 458         remote->interface = interface;
 459         remote->in_endpoint = endpoint;
 460         remote->toggle = -1;    /* Set to -1 so we will always not match the toggle from the first remote message. */
 461
 462         remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
 463         if (!remote->in_buffer) {
 464                 retval = -ENOMEM;
 465                 goto fail1;
 466         }
 467
 468         remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
 469         if (!remote->irq_urb) {
 470                 retval = -ENOMEM;
 471                 goto fail2;
 472         }
 473
 474         retval = keyspan_setup(udev);
 475         if (retval) {
 476                 retval = -ENODEV;
 477                 goto fail3;
 478         }
 479
 480         if (udev->manufacturer)
 481                 strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
 482
 483         if (udev->product) {
 484                 if (udev->manufacturer)
 485                         strlcat(remote->name, " ", sizeof(remote->name));
 486                 strlcat(remote->name, udev->product, sizeof(remote->name));
 487         }
 488
 489         if (!strlen(remote->name))
 490                 snprintf(remote->name, sizeof(remote->name),
 491                          "USB Keyspan Remote %04x:%04x",
 492                          le16_to_cpu(udev->descriptor.idVendor),
 493                          le16_to_cpu(udev->descriptor.idProduct));
 494
 495         usb_make_path(udev, remote->phys, sizeof(remote->phys));
 496         strlcat(remote->phys, "/input0", sizeof(remote->phys));
 497
 498         input_dev->name = remote->name;
 499         input_dev->phys = remote->phys;
 500         usb_to_input_id(udev, &input_dev->id);
 501         input_dev->cdev.dev = &interface->dev;
 502
 503         input_dev->evbit[0] = BIT(EV_KEY);              /* We will only report KEY events. */
 504         for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
 505                 if (keyspan_key_table[i] != KEY_RESERVED)
 506                         set_bit(keyspan_key_table[i], input_dev->keybit);
 507
 508         input_dev->private = remote;
 509         input_dev->open = keyspan_open;
 510         input_dev->close = keyspan_close;
 511
 512         /*
 513          * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
 514          */
 515         usb_fill_int_urb(remote->irq_urb,
 516                          remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),
 517                          remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
 518                          remote->in_endpoint->bInterval);
 519         remote->irq_urb->transfer_dma = remote->in_dma;
 520         remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 521
 522         /* we can register the device now, as it is ready */
 523         input_register_device(remote->input);
 524
 525         /* save our data pointer in this interface device */
 526         usb_set_intfdata(interface, remote);
 527
 528         return 0;
 529
 530  fail3: usb_free_urb(remote->irq_urb);
 531  fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 532  fail1: kfree(remote);
 533         input_free_device(input_dev);
 534
 535         return retval;
 536 }
 537
 538 /*
 539  * Routine called when a device is disconnected from the USB.
 540  */
 541 static void keyspan_disconnect(struct usb_interface *interface)
 542 {
 543         struct usb_keyspan *remote;
 544
 545         remote = usb_get_intfdata(interface);
 546         usb_set_intfdata(interface, NULL);
 547
 548         if (remote) {   /* We have a valid driver structure so clean up everything we allocated. */
 549                 input_unregister_device(remote->input);
 550                 usb_kill_urb(remote->irq_urb);
 551                 usb_free_urb(remote->irq_urb);
 552                 usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 553                 kfree(remote);
 554         }
 555 }
 556
 557 /*
 558  * Standard driver set up sections
 559  */
 560 static struct usb_driver keyspan_driver =
 561 {
 562         .name =         "keyspan_remote",
 563         .probe =        keyspan_probe,
 564         .disconnect =   keyspan_disconnect,
 565         .id_table =     keyspan_table
 566 };
 567
 568 static int __init usb_keyspan_init(void)
 569 {
 570         int result;
 571
 572         /* register this driver with the USB subsystem */
 573         result = usb_register(&keyspan_driver);
 574         if (result)
 575                 err("usb_register failed. Error number %d\n", result);
 576
 577         return result;
 578 }
 579
 580 static void __exit usb_keyspan_exit(void)
 581 {
 582         /* deregister this driver with the USB subsystem */
 583         usb_deregister(&keyspan_driver);
 584 }
 585
 586 module_init(usb_keyspan_init);
 587 module_exit(usb_keyspan_exit);
 588
 589 MODULE_DEVICE_TABLE(usb, keyspan_table);
 590 MODULE_AUTHOR(DRIVER_AUTHOR);
 591 MODULE_DESCRIPTION(DRIVER_DESC);
 592 MODULE_LICENSE(DRIVER_LICENSE);