ARM: 7989/1: Delete asm/system.h
[linux/fpc-iii.git] / drivers / usb / phy / phy-mv-u3d-usb.h
blob2a658cb9a527e1f694e9f0bea33532c66b1a8c89
1 /*
2 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 */
9 #ifndef __MV_U3D_PHY_H
10 #define __MV_U3D_PHY_H
12 #define USB3_POWER_PLL_CONTROL 0x1
13 #define USB3_KVCO_CALI_CONTROL 0x2
14 #define USB3_IMPEDANCE_CALI_CTRL 0x3
15 #define USB3_IMPEDANCE_TX_SSC 0x4
16 #define USB3_SQUELCH_FFE 0x6
17 #define USB3_GEN1_SET0 0xD
18 #define USB3_GEN2_SET0 0xF
19 #define USB3_GEN2_SET1 0x10
20 #define USB3_DIGITAL_LOOPBACK_EN 0x23
21 #define USB3_PHY_ISOLATION_MODE 0x26
22 #define USB3_TXDETRX 0x48
23 #define USB3_TX_EMPPH 0x5E
24 #define USB3_RESET_CONTROL 0x90
25 #define USB3_PIPE_SM_CTRL 0x91
27 #define USB3_RESET_CONTROL_RESET_PIPE 0x1
28 #define USB3_RESET_CONTROL_RESET_PHY 0x2
30 #define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0)
31 #define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0
32 #define USB3_PLL_25MHZ 0x2
33 #define USB3_PLL_26MHZ 0x5
34 #define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5)
35 #define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5
36 #define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12)
37 #define USB3_POWER_PLL_CONTROL_PU_SHIFT 12
38 #define USB3_POWER_PLL_CONTROL_PU (0xF << 12)
40 #define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12)
41 #define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12
42 #define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14
43 #define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15
45 #define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF
46 #define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0
47 #define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4)
48 #define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4
49 #define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8)
50 #define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8
52 #define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
53 #define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11
55 #define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1)
56 #define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1
57 #define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6
58 #define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7)
59 #define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7
60 #define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11)
61 #define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11
62 #define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
63 #define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15
65 #define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0)
66 #define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0
67 #define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3)
68 #define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3
69 #define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6)
70 #define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6
71 #define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8)
72 #define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8
74 #define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10)
75 #define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10
77 #define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12)
78 #define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12
80 #define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0)
81 #define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0
83 #define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF
84 #define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0
85 #define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4)
86 #define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4
87 #define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8)
89 #define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4)
90 #define USB3_TXDETRX_VTHSEL_SHIFT 4
92 #define USB3_TX_EMPPH_AMP_MASK (0xF << 0)
93 #define USB3_TX_EMPPH_AMP_SHIFT 0
94 #define USB3_TX_EMPPH_EN_MASK (0x1 << 6)
95 #define USB3_TX_EMPPH_EN_SHIFT 6
96 #define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7)
97 #define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7
98 #define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8)
99 #define USB3_TX_EMPPH_PAR1_SHIFT 8
100 #define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13)
101 #define USB3_TX_EMPPH_PAR2_SHIFT 13
103 #define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15
105 #endif /* __MV_U3D_PHY_H */