| blob | 94f33059158a190a5dbff74d57cfb70a47830e13 |
1 /*
2 * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
12 /include/ "skeleton.dtsi"
14 / {
15 aliases {
16 serial0 = &uart1;
17 serial1 = &uart2;
18 serial2 = &uart3;
19 serial3 = &uart4;
20 serial4 = &uart5;
21 gpio0 = &gpio1;
22 gpio1 = &gpio2;
23 gpio2 = &gpio3;
24 gpio3 = &gpio4;
25 usb0 = &usbotg;
26 usb1 = &usbhost1;
27 };
29 asic: asic-interrupt-controller@68000000 {
30 compatible = "fsl,imx25-asic", "fsl,avic";
31 interrupt-controller;
32 #interrupt-cells = <1>;
33 reg = <0x68000000 0x8000000>;
34 };
36 clocks {
37 #address-cells = <1>;
38 #size-cells = <0>;
40 osc {
41 compatible = "fsl,imx-osc", "fixed-clock";
42 clock-frequency = <24000000>;
43 };
44 };
46 soc {
47 #address-cells = <1>;
48 #size-cells = <1>;
49 compatible = "simple-bus";
50 interrupt-parent = <&asic>;
51 ranges;
53 aips@43f00000 { /* AIPS1 */
54 compatible = "fsl,aips-bus", "simple-bus";
55 #address-cells = <1>;
56 #size-cells = <1>;
57 reg = <0x43f00000 0x100000>;
58 ranges;
60 i2c1: i2c@43f80000 {
61 #address-cells = <1>;
62 #size-cells = <0>;
63 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
64 reg = <0x43f80000 0x4000>;
65 clocks = <&clks 48>;
66 clock-names = "";
67 interrupts = <3>;
68 status = "disabled";
69 };
71 i2c3: i2c@43f84000 {
72 #address-cells = <1>;
73 #size-cells = <0>;
74 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
75 reg = <0x43f84000 0x4000>;
76 clocks = <&clks 48>;
77 clock-names = "";
78 interrupts = <10>;
79 status = "disabled";
80 };
82 can1: can@43f88000 {
83 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
84 reg = <0x43f88000 0x4000>;
85 interrupts = <43>;
86 clocks = <&clks 75>, <&clks 75>;
87 clock-names = "ipg", "per";
88 status = "disabled";
89 };
91 can2: can@43f8c000 {
92 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
93 reg = <0x43f8c000 0x4000>;
94 interrupts = <44>;
95 clocks = <&clks 76>, <&clks 76>;
96 clock-names = "ipg", "per";
97 status = "disabled";
98 };
100 uart1: serial@43f90000 {
101 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
102 reg = <0x43f90000 0x4000>;
103 interrupts = <45>;
104 clocks = <&clks 120>, <&clks 57>;
105 clock-names = "ipg", "per";
106 status = "disabled";
107 };
109 uart2: serial@43f94000 {
110 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
111 reg = <0x43f94000 0x4000>;
112 interrupts = <32>;
113 clocks = <&clks 121>, <&clks 57>;
114 clock-names = "ipg", "per";
115 status = "disabled";
116 };
118 i2c2: i2c@43f98000 {
119 #address-cells = <1>;
120 #size-cells = <0>;
121 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
122 reg = <0x43f98000 0x4000>;
123 clocks = <&clks 48>;
124 clock-names = "";
125 interrupts = <4>;
126 status = "disabled";
127 };
129 owire@43f9c000 {
130 #address-cells = <1>;
131 #size-cells = <0>;
132 reg = <0x43f9c000 0x4000>;
133 clocks = <&clks 51>;
134 clock-names = "";
135 interrupts = <2>;
136 status = "disabled";
137 };
139 spi1: cspi@43fa4000 {
140 #address-cells = <1>;
141 #size-cells = <0>;
142 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
143 reg = <0x43fa4000 0x4000>;
144 clocks = <&clks 62>;
145 clock-names = "ipg";
146 interrupts = <14>;
147 status = "disabled";
148 };
150 kpp@43fa8000 {
151 #address-cells = <1>;
152 #size-cells = <0>;
153 reg = <0x43fa8000 0x4000>;
154 clocks = <&clks 102>;
155 clock-names = "";
156 interrupts = <24>;
157 status = "disabled";
158 };
160 iomuxc@43fac000{
161 compatible = "fsl,imx25-iomuxc";
162 reg = <0x43fac000 0x4000>;
163 };
165 audmux@43fb0000 {
166 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
167 reg = <0x43fb0000 0x4000>;
168 status = "disabled";
169 };
170 };
172 spba@50000000 {
173 compatible = "fsl,spba-bus", "simple-bus";
174 #address-cells = <1>;
175 #size-cells = <1>;
176 reg = <0x50000000 0x40000>;
177 ranges;
179 spi3: cspi@50004000 {
180 #address-cells = <1>;
181 #size-cells = <0>;
182 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
183 reg = <0x50004000 0x4000>;
184 interrupts = <0>;
185 clocks = <&clks 80>;
186 clock-names = "ipg";
187 status = "disabled";
188 };
190 uart4: serial@50008000 {
191 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
192 reg = <0x50008000 0x4000>;
193 interrupts = <5>;
194 clocks = <&clks 123>, <&clks 57>;
195 clock-names = "ipg", "per";
196 status = "disabled";
197 };
199 uart3: serial@5000c000 {
200 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
201 reg = <0x5000c000 0x4000>;
202 interrupts = <18>;
203 clocks = <&clks 122>, <&clks 57>;
204 clock-names = "ipg", "per";
205 status = "disabled";
206 };
208 spi2: cspi@50010000 {
209 #address-cells = <1>;
210 #size-cells = <0>;
211 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
212 reg = <0x50010000 0x4000>;
213 clocks = <&clks 79>;
214 clock-names = "ipg";
215 interrupts = <13>;
216 status = "disabled";
217 };
219 ssi2: ssi@50014000 {
220 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
221 reg = <0x50014000 0x4000>;
222 interrupts = <11>;
223 status = "disabled";
224 };
226 esai@50018000 {
227 reg = <0x50018000 0x4000>;
228 interrupts = <7>;
229 };
231 uart5: serial@5002c000 {
232 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
233 reg = <0x5002c000 0x4000>;
234 interrupts = <40>;
235 clocks = <&clks 124>, <&clks 57>;
236 clock-names = "ipg", "per";
237 status = "disabled";
238 };
240 tsc: tsc@50030000 {
241 compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
242 reg = <0x50030000 0x4000>;
243 interrupts = <46>;
244 clocks = <&clks 119>;
245 clock-names = "ipg";
246 status = "disabled";
247 };
249 ssi1: ssi@50034000 {
250 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
251 reg = <0x50034000 0x4000>;
252 interrupts = <12>;
253 status = "disabled";
254 };
256 fec: ethernet@50038000 {
257 compatible = "fsl,imx25-fec";
258 reg = <0x50038000 0x4000>;
259 interrupts = <57>;
260 clocks = <&clks 88>, <&clks 65>;
261 clock-names = "ipg", "ahb";
262 status = "disabled";
263 };
264 };
266 aips@53f00000 { /* AIPS2 */
267 compatible = "fsl,aips-bus", "simple-bus";
268 #address-cells = <1>;
269 #size-cells = <1>;
270 reg = <0x53f00000 0x100000>;
271 ranges;
273 clks: ccm@53f80000 {
274 compatible = "fsl,imx25-ccm";
275 reg = <0x53f80000 0x4000>;
276 interrupts = <31>;
277 #clock-cells = <1>;
278 };
280 gpt4: timer@53f84000 {
281 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
282 reg = <0x53f84000 0x4000>;
283 clocks = <&clks 9>, <&clks 45>;
284 clock-names = "ipg", "per";
285 interrupts = <1>;
286 };
288 gpt3: timer@53f88000 {
289 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
290 reg = <0x53f88000 0x4000>;
291 clocks = <&clks 9>, <&clks 47>;
292 clock-names = "ipg", "per";
293 interrupts = <29>;
294 };
296 gpt2: timer@53f8c000 {
297 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
298 reg = <0x53f8c000 0x4000>;
299 clocks = <&clks 9>, <&clks 47>;
300 clock-names = "ipg", "per";
301 interrupts = <53>;
302 };
304 gpt1: timer@53f90000 {
305 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
306 reg = <0x53f90000 0x4000>;
307 clocks = <&clks 9>, <&clks 47>;
308 clock-names = "ipg", "per";
309 interrupts = <54>;
310 };
312 epit1: timer@53f94000 {
313 compatible = "fsl,imx25-epit";
314 reg = <0x53f94000 0x4000>;
315 interrupts = <28>;
316 };
318 epit2: timer@53f98000 {
319 compatible = "fsl,imx25-epit";
320 reg = <0x53f98000 0x4000>;
321 interrupts = <27>;
322 };
324 gpio4: gpio@53f9c000 {
325 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
326 reg = <0x53f9c000 0x4000>;
327 interrupts = <23>;
328 gpio-controller;
329 #gpio-cells = <2>;
330 interrupt-controller;
331 #interrupt-cells = <2>;
332 };
334 pwm2: pwm@53fa0000 {
335 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
336 #pwm-cells = <2>;
337 reg = <0x53fa0000 0x4000>;
338 clocks = <&clks 106>, <&clks 36>;
339 clock-names = "ipg", "per";
340 interrupts = <36>;
341 };
343 gpio3: gpio@53fa4000 {
344 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
345 reg = <0x53fa4000 0x4000>;
346 interrupts = <16>;
347 gpio-controller;
348 #gpio-cells = <2>;
349 interrupt-controller;
350 #interrupt-cells = <2>;
351 };
353 pwm3: pwm@53fa8000 {
354 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
355 #pwm-cells = <2>;
356 reg = <0x53fa8000 0x4000>;
357 clocks = <&clks 107>, <&clks 36>;
358 clock-names = "ipg", "per";
359 interrupts = <41>;
360 };
362 esdhc1: esdhc@53fb4000 {
363 compatible = "fsl,imx25-esdhc";
364 reg = <0x53fb4000 0x4000>;
365 interrupts = <9>;
366 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
367 clock-names = "ipg", "ahb", "per";
368 status = "disabled";
369 };
371 esdhc2: esdhc@53fb8000 {
372 compatible = "fsl,imx25-esdhc";
373 reg = <0x53fb8000 0x4000>;
374 interrupts = <8>;
375 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
376 clock-names = "ipg", "ahb", "per";
377 status = "disabled";
378 };
380 lcdc@53fbc000 {
381 reg = <0x53fbc000 0x4000>;
382 interrupts = <39>;
383 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
384 clock-names = "ipg", "ahb", "per";
385 status = "disabled";
386 };
388 slcdc@53fc0000 {
389 reg = <0x53fc0000 0x4000>;
390 interrupts = <38>;
391 status = "disabled";
392 };
394 pwm4: pwm@53fc8000 {
395 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
396 reg = <0x53fc8000 0x4000>;
397 clocks = <&clks 108>, <&clks 36>;
398 clock-names = "ipg", "per";
399 interrupts = <42>;
400 };
402 gpio1: gpio@53fcc000 {
403 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
404 reg = <0x53fcc000 0x4000>;
405 interrupts = <52>;
406 gpio-controller;
407 #gpio-cells = <2>;
408 interrupt-controller;
409 #interrupt-cells = <2>;
410 };
412 gpio2: gpio@53fd0000 {
413 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
414 reg = <0x53fd0000 0x4000>;
415 interrupts = <51>;
416 gpio-controller;
417 #gpio-cells = <2>;
418 interrupt-controller;
419 #interrupt-cells = <2>;
420 };
422 sdma@53fd4000 {
423 compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
424 reg = <0x53fd4000 0x4000>;
425 clocks = <&clks 112>, <&clks 68>;
426 clock-names = "ipg", "ahb";
427 interrupts = <34>;
428 };
430 wdog@53fdc000 {
431 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
432 reg = <0x53fdc000 0x4000>;
433 clocks = <&clks 126>;
434 clock-names = "";
435 interrupts = <55>;
436 };
438 pwm1: pwm@53fe0000 {
439 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
440 #pwm-cells = <2>;
441 reg = <0x53fe0000 0x4000>;
442 clocks = <&clks 105>, <&clks 36>;
443 clock-names = "ipg", "per";
444 interrupts = <26>;
445 };
447 usbphy1: usbphy@1 {
448 compatible = "nop-usbphy";
449 status = "disabled";
450 };
452 usbphy2: usbphy@2 {
453 compatible = "nop-usbphy";
454 status = "disabled";
455 };
457 usbotg: usb@53ff4000 {
458 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
459 reg = <0x53ff4000 0x0200>;
460 interrupts = <37>;
461 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
462 clock-names = "ipg", "ahb", "per";
463 fsl,usbmisc = <&usbmisc 0>;
464 status = "disabled";
465 };
467 usbhost1: usb@53ff4400 {
468 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
469 reg = <0x53ff4400 0x0200>;
470 interrupts = <35>;
471 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
472 clock-names = "ipg", "ahb", "per";
473 fsl,usbmisc = <&usbmisc 1>;
474 status = "disabled";
475 };
477 usbmisc: usbmisc@53ff4600 {
478 #index-cells = <1>;
479 compatible = "fsl,imx25-usbmisc";
480 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
481 clock-names = "ipg", "ahb", "per";
482 reg = <0x53ff4600 0x00f>;
483 status = "disabled";
484 };
486 dryice@53ffc000 {
487 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
488 reg = <0x53ffc000 0x4000>;
489 clocks = <&clks 81>;
490 clock-names = "ipg";
491 interrupts = <25>;
492 };
493 };
495 emi@80000000 {
496 compatible = "fsl,emi-bus", "simple-bus";
497 #address-cells = <1>;
498 #size-cells = <1>;
499 reg = <0x80000000 0x3b002000>;
500 ranges;
502 nfc: nand@bb000000 {
503 #address-cells = <1>;
504 #size-cells = <1>;
506 compatible = "fsl,imx25-nand";
507 reg = <0xbb000000 0x2000>;
508 clocks = <&clks 50>;
509 clock-names = "";
510 interrupts = <33>;
511 status = "disabled";
512 };
513 };
514 };
515 };