5 model = "Ka-Ro electronics TX28 module";
6 compatible = "karo,tx28", "fsl,imx28";
9 reg = <0x40000000 0x08000000>;
15 compatible = "fsl,imx28-mmc";
16 pinctrl-names = "default";
17 pinctrl-0 = <&mmc0_4bit_pins_a
25 pinctrl-names = "default";
26 pinctrl-0 = <&hog_pins_a>;
31 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
33 fsl,drive-strength = <0>;
38 mac0_pins_gpio: mac0-gpio-mode@0 {
41 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
42 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
43 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
44 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
45 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
46 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
47 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
48 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
49 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
51 fsl,drive-strength = <0>;
60 pinctrl-names = "default";
61 pinctrl-0 = <&i2c0_pins_a>;
65 compatible = "mxim,ds1339";
71 pinctrl-names = "default";
72 pinctrl-0 = <&pwm0_pins_a>;
76 duart: serial@80074000 {
77 pinctrl-names = "default";
78 pinctrl-0 = <&duart_4pins_a>;
82 auart1: serial@8006c000 {
83 pinctrl-names = "default";
84 pinctrl-0 = <&auart1_pins_a>;
91 mac0: ethernet@800f0000 {
93 pinctrl-names = "default", "gpio_mode";
94 pinctrl-0 = <&mac0_pins_a>;
95 pinctrl-1 = <&mac0_pins_gpio>;
101 compatible = "gpio-leds";
105 gpios = <&gpio4 10 0>;
106 linux,default-trigger = "heartbeat";
111 compatible = "pwm-backlight";
112 pwms = <&pwm 0 5000000>;
113 brightness-levels = <0 4 8 16 32 64 128 255>;
114 default-brightness-level = <6>;