arch/arm/mach-omap1/irq.c

   1 /*
   2  * linux/arch/arm/mach-omap1/irq.c
   3  *
   4  * Interrupt handler for all OMAP boards
   5  *
   6  * Copyright (C) 2004 Nokia Corporation
   7  * Written by Tony Lindgren <tony@atomide.com>
   8  * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com>
   9  *
  10  * Completely re-written to support various OMAP chips with bank specific
  11  * interrupt handlers.
  12  *
  13  * Some snippets of the code taken from the older OMAP interrupt handler
  14  * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
  15  *
  16  * GPIO interrupt handler moved to gpio.c by Juha Yrjola
  17  *
  18  * This program is free software; you can redistribute it and/or modify it
  19  * under the terms of the GNU General Public License as published by the
  20  * Free Software Foundation; either version 2 of the License, or (at your
  21  * option) any later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  24  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  25  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  26  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  27  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  28  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  29  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  30  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  32  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  *
  34  * You should have received a copy of the  GNU General Public License along
  35  * with this program; if not, write  to the Free Software Foundation, Inc.,
  36  * 675 Mass Ave, Cambridge, MA 02139, USA.
  37  */
  38 #include <linux/gpio.h>
  39 #include <linux/init.h>
  40 #include <linux/module.h>
  41 #include <linux/sched.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/io.h>
  44
  45 #include <asm/irq.h>
  46 #include <asm/mach/irq.h>
  47
  48 #include "soc.h"
  49
  50 #include <mach/hardware.h>
  51
  52 #include "common.h"
  53
  54 #define IRQ_BANK(irq) ((irq) >> 5)
  55 #define IRQ_BIT(irq)  ((irq) & 0x1f)
  56
  57 struct omap_irq_bank {
  58         unsigned long base_reg;
  59         unsigned long trigger_map;
  60         unsigned long wake_enable;
  61 };
  62
  63 u32 omap_irq_flags;
  64 static unsigned int irq_bank_count;
  65 static struct omap_irq_bank *irq_banks;
  66
  67 static inline unsigned int irq_bank_readl(int bank, int offset)
  68 {
  69         return omap_readl(irq_banks[bank].base_reg + offset);
  70 }
  71
  72 static inline void irq_bank_writel(unsigned long value, int bank, int offset)
  73 {
  74         omap_writel(value, irq_banks[bank].base_reg + offset);
  75 }
  76
  77 static void omap_ack_irq(struct irq_data *d)
  78 {
  79         if (d->irq > 31)
  80                 omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
  81
  82         omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
  83 }
  84
  85 static void omap_mask_irq(struct irq_data *d)
  86 {
  87         int bank = IRQ_BANK(d->irq);
  88         u32 l;
  89
  90         l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
  91         l |= 1 << IRQ_BIT(d->irq);
  92         omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
  93 }
  94
  95 static void omap_unmask_irq(struct irq_data *d)
  96 {
  97         int bank = IRQ_BANK(d->irq);
  98         u32 l;
  99
 100         l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
 101         l &= ~(1 << IRQ_BIT(d->irq));
 102         omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
 103 }
 104
 105 static void omap_mask_ack_irq(struct irq_data *d)
 106 {
 107         omap_mask_irq(d);
 108         omap_ack_irq(d);
 109 }
 110
 111 static int omap_wake_irq(struct irq_data *d, unsigned int enable)
 112 {
 113         int bank = IRQ_BANK(d->irq);
 114
 115         if (enable)
 116                 irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
 117         else
 118                 irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
 119
 120         return 0;
 121 }
 122
 123
 124 /*
 125  * Allows tuning the IRQ type and priority
 126  *
 127  * NOTE: There is currently no OMAP fiq handler for Linux. Read the
 128  *       mailing list threads on FIQ handlers if you are planning to
 129  *       add a FIQ handler for OMAP.
 130  */
 131 static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
 132 {
 133         signed int bank;
 134         unsigned long val, offset;
 135
 136         bank = IRQ_BANK(irq);
 137         /* FIQ is only available on bank 0 interrupts */
 138         fiq = bank ? 0 : (fiq & 0x1);
 139         val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
 140         offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
 141         irq_bank_writel(val, bank, offset);
 142 }
 143
 144 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
 145 static struct omap_irq_bank omap7xx_irq_banks[] = {
 146         { .base_reg = OMAP_IH1_BASE,            .trigger_map = 0xb3f8e22f },
 147         { .base_reg = OMAP_IH2_BASE,            .trigger_map = 0xfdb9c1f2 },
 148         { .base_reg = OMAP_IH2_BASE + 0x100,    .trigger_map = 0x800040f3 },
 149 };
 150 #endif
 151
 152 #ifdef CONFIG_ARCH_OMAP15XX
 153 static struct omap_irq_bank omap1510_irq_banks[] = {
 154         { .base_reg = OMAP_IH1_BASE,            .trigger_map = 0xb3febfff },
 155         { .base_reg = OMAP_IH2_BASE,            .trigger_map = 0xffbfffed },
 156 };
 157 static struct omap_irq_bank omap310_irq_banks[] = {
 158         { .base_reg = OMAP_IH1_BASE,            .trigger_map = 0xb3faefc3 },
 159         { .base_reg = OMAP_IH2_BASE,            .trigger_map = 0x65b3c061 },
 160 };
 161 #endif
 162
 163 #if defined(CONFIG_ARCH_OMAP16XX)
 164
 165 static struct omap_irq_bank omap1610_irq_banks[] = {
 166         { .base_reg = OMAP_IH1_BASE,            .trigger_map = 0xb3fefe8f },
 167         { .base_reg = OMAP_IH2_BASE,            .trigger_map = 0xfdb7c1fd },
 168         { .base_reg = OMAP_IH2_BASE + 0x100,    .trigger_map = 0xffffb7ff },
 169         { .base_reg = OMAP_IH2_BASE + 0x200,    .trigger_map = 0xffffffff },
 170 };
 171 #endif
 172
 173 static struct irq_chip omap_irq_chip = {
 174         .name           = "MPU",
 175         .irq_ack        = omap_mask_ack_irq,
 176         .irq_mask       = omap_mask_irq,
 177         .irq_unmask     = omap_unmask_irq,
 178         .irq_set_wake   = omap_wake_irq,
 179 };
 180
 181 void __init omap1_init_irq(void)
 182 {
 183         int i, j;
 184
 185 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 186         if (cpu_is_omap7xx()) {
 187                 omap_irq_flags = INT_7XX_IH2_IRQ;
 188                 irq_banks = omap7xx_irq_banks;
 189                 irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 190         }
 191 #endif
 192 #ifdef CONFIG_ARCH_OMAP15XX
 193         if (cpu_is_omap1510()) {
 194                 omap_irq_flags = INT_1510_IH2_IRQ;
 195                 irq_banks = omap1510_irq_banks;
 196                 irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 197         }
 198         if (cpu_is_omap310()) {
 199                 omap_irq_flags = INT_1510_IH2_IRQ;
 200                 irq_banks = omap310_irq_banks;
 201                 irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
 202         }
 203 #endif
 204 #if defined(CONFIG_ARCH_OMAP16XX)
 205         if (cpu_is_omap16xx()) {
 206                 omap_irq_flags = INT_1510_IH2_IRQ;
 207                 irq_banks = omap1610_irq_banks;
 208                 irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
 209         }
 210 #endif
 211         printk("Total of %i interrupts in %i interrupt banks\n",
 212                irq_bank_count * 32, irq_bank_count);
 213
 214         /* Mask and clear all interrupts */
 215         for (i = 0; i < irq_bank_count; i++) {
 216                 irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET);
 217                 irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET);
 218         }
 219
 220         /* Clear any pending interrupts */
 221         irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
 222         irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 223
 224         /* Enable interrupts in global mask */
 225         if (cpu_is_omap7xx())
 226                 irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
 227
 228         /* Install the interrupt handlers for each bank */
 229         for (i = 0; i < irq_bank_count; i++) {
 230                 for (j = i * 32; j < (i + 1) * 32; j++) {
 231                         int irq_trigger;
 232
 233                         irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
 234                         omap_irq_set_cfg(j, 0, 0, irq_trigger);
 235
 236                         irq_set_chip_and_handler(j, &omap_irq_chip,
 237                                                  handle_level_irq);
 238                         set_irq_flags(j, IRQF_VALID);
 239                 }
 240         }
 241
 242         /* Unmask level 2 handler */
 243
 244         if (cpu_is_omap7xx())
 245                 omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
 246         else if (cpu_is_omap15xx())
 247                 omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
 248         else if (cpu_is_omap16xx())
 249                 omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
 250 }